RESUMEN
To cope with the urgent and unprecedented demands for rare earth elements (REEs) in sophisticated industries, increased attention has been paid to REE recovery from recycled streams. However, the similar geochemical behaviors of REEs and transition metals often result in poor separation performance due to nonselectivity. Here, a unique approach based on the selective transformation between ceria sulfation and iron/manganese mineralization was proposed, leading to the enhancement of the selective separation of REEs. The mechanism of the selective transformation of minerals could be ascribed to the distinct geochemical and metallurgical properties of ions, resulting in different combinations of cations and anions. According to hard-soft acid-base (HSAB) theory, the strong Lewis acid of Ce(III) was inclined to combine with the hard base of sulfates (SO42-), while the borderline acid of Fe(II)/Mn(II) prefers to interact with oxygen ions (O2-). Both in situ characterization and density functional theory (DFT) calculation further revealed that such selective transformation might trigger by the generation of an oxygen vacancy on the surface of CeO2, leading to the formation of Ce2(SO4)3 and Fe/Mn spinel. Although the electron density difference of the configurations (CeO2-x-SO4, Fe2O3-x-SO4, and MnO2-x-SO4) shared a similar direction of the electron transfer from the metals to the sulfate-based oxygen, the higher electron depletion of Ce (QCe = -1.91 e) than Fe (QFe = -1.66 e) and Mn (QMn = -1.64 e) indicated the higher stability in the Ce-O-S complex, resulting in the larger adsorption energy of CeO2-x-SO4 (-6.88 eV) compared with Fe2O3-x-SO4 (-3.10 eV) and MnO2-x-SO4 (-2.49 eV). This research provided new insights into the selective transformation of REEs and transition metals in pyrometallurgy and thus offered a new approach for the selective recovery of REEs from secondary resources.
Asunto(s)
Metales de Tierras Raras , Elementos de Transición , Manganeso , Hierro , Adsorción , SulfatosRESUMEN
The increasing demand for Rare Earth Elements (REEs) and the depletion of mineral resources motivate sustainable strategies for REE recovery from alternative unconventional sources, such as REE hyperaccumulator. The greatest impediment to REE agromining is the difficulty in the separation of REEs and other elements from the harvested biomass (bio-ore). Here, we develop a sulfuric acid assisted ethanol fractionation method for processing D. linearis bio-ore to produce the pure REE compounds and value-added chemicals. The results show that 94.5% of REEs and 87.4% of Ca remained in the solid phase, and most of the impurities (Al, Fe, Mg, and Mn) transferred to the liquid phase. Density functional theory calculations show that the water-cation bonds of REEs and Ca cations were broken more easily than the bonds of the cations of key impurities, causing lower solubility of REEs and Ca compounds. Subsequent separation and purification led to a REE-oxide (REO) product with a purity of 97.1% and a final recovery of 88.9%. In addition, lignin and phenols were obtained during organosolv fractionation coupled with a fast pyrolysis process. This new approach opens up the possibility for simultaneous selective recovery of REEs and to produce value-added chemicals from REE bio-ore refining.
Asunto(s)
Metales de Tierras Raras , Tracheophyta , Metales de Tierras Raras/química , AguaRESUMEN
Biosurfactants, surface-active agents produced by microorganisms, are increasingly studied for their potential use in soil remediation processes because they are more environmentally friendly than their chemically produced homologues. In this work, we report on the use of a crude biosurfactant produced by a bacterial consortium isolated from a PAHs-contaminated soil, compared with other (bio)surfactants (Tween80, Sodium dodecyl sulfate - SDS, rhamnolipids mix), to wash PAHs from a contaminated porous media. Assays were done using columns filled with sand or sand-clay mixtures (95:5) spiked with four model PAHs. The crude biosurfactant showed less adsorption to the [sand] and the [sand + clay] columns compared to Tween 80, SDS and the rhamnolipid mix. The biosurfactant showed the second best capacity to remove PAHs from the columns (as dissolved and particulate phases), both from [sand] and [sand + clay], after SDS when applied at lower concentrations than the other sufactants. The effluent concentrations of phenanthrene (PHE), pyrene (PYR) and benzo[a]pyrene (BAP) increased in the presence of the crude biosurfactant. Compared to the control experiment using only water, the global PAHs washed mass (amount of PAHs removed from the columns) increased between 9 and 1000 times for PHE and BAP in the [sand] column, and between 55 and 6000 times respectively for PHE and BAP in the [sand + clay] columns. Moreover, in the [sand + clay] columns, leaching of a part of the clays was observed in the SDS and the biosurfactant injections assays. This clay leaching resulted in higher PAHs removal, due not to desorption but rather to particulate transport. In the context of washing PAH-contaminated soils in biopiles or subsurface remediation, our results could help in sizing the remediation approach using an environmental friendly biosurfactant, before a pump-and-treat process.
Asunto(s)
Hidrocarburos Policíclicos Aromáticos , Contaminantes del Suelo , Hidrocarburos Policíclicos Aromáticos/análisis , Tensoactivos/química , Contaminantes del Suelo/análisis , Arcilla , Porosidad , Arena , Suelo/química , Biodegradación AmbientalRESUMEN
Hyperaccumulator plants have the ability to efficiently concentrate metallic elements, e.g. nickel, from low-grade sources into their living biomass. Although the majority of nickel hyperaccumulator plant species restrict cobalt uptake, some species are able to co-accumulate cobalt when growing in ultramafic soils. The asteraceous perennial herb Berkheya coddii from South Africa is one of the most promising agromining crops known globally. It may accumulate nickel in excess of 30 000 µg g-1 in dry leaves, while co-accumulating up to 600 µg g-1 cobalt. This study aimed to elucidate the interactions between nickel and cobalt for uptake by and translocation into B. coddii through a pot experiment including various cobalt/nickel treatment combinations in soil, after which uptake and localisation were recorded. Cobalt in the substrate limits nickel uptake by B. coddii plants and is mainly retained in the basal leaves in contrast to Ni that is rapidly transferred to the top of the plant. B. coddii was more tolerant to high Ni concentration, whether in the substrate or internally but remains a promising crop which could be used, with suitable agronomic measures and practices, for cobalt agromining in areas with high soil cobalt but low soil nickel. A yield of 77 kg ha-1 nickel and 16.5 kg ha-1 cobalt may be attainable under optimum conditions.
Asunto(s)
Asteraceae/metabolismo , Cobalto/metabolismo , Níquel/metabolismo , Contaminantes del Suelo/metabolismo , Biodegradación Ambiental , SudáfricaRESUMEN
Biosurfactants are surface-active agents produced by microorganisms whose use in soil remediation processes is increasingly discussed as a more environmentally friendly alternative than chemically produced surfactants. In this work, we report the production of a biosurfactant by a bacterial community extracted from a polluted soil, mainly impacted by PAHs, in order to use it in a soil-washing process coupled with bioremediation. Nutrient balance was a critical parameter to optimize the production. Best conditions for biosurfactant production were found to be 20 g/L of glucose, 2 g/L of NH4NO3, and 14.2 g/L of Na2HPO4, corresponding to a C/N/P molar ratio equal to 13/1/2. Purification of the produced biosurfactant by acidification and double extraction with dichloromethane as a solvent allowed measuring the Critical Micellar Concentration (CMC) as equal to 42 mg/L. The capacity of the purified biosurfactant to increase the apparent solubility of four reference PAHs (naphthalene, phenanthrene, pyrene and benzo[a]pyrene) was completed. The solubilisation ratios, in mg of PAH/g of biosurfactant for phenanthrene, pyrene and benzo[a]pyrene are 0.214, 0.1204 and 0.0068, respectively. Identification of the bacteria found in the colony producing the biosurfactant showed the presence of bacteria able to produce biosurfactant (Enterobacteriaceae, Pseudomonas), as well as, others able to degrade PAHs (Microbacterium, Pseudomonas, Rhodanobacteraceae).
Asunto(s)
Suelo , Biodegradación Ambiental , Hidrocarburos Policíclicos Aromáticos , Contaminantes del Suelo , TensoactivosRESUMEN
Surfactants are used to assist the zero-valent iron-mediated reductive dechlorination (ZVI-RD) of hydrophobic organic contaminants (HOCs). Although the effect of surfactants has been investigated in single-factor systems, the relationships between the surfactant and the matrix properties during RD are not well understood. Thus, an orthogonal experiment and post-experiment characterization of ZVI were conducted in the present study to estimate the integrated effects of plausible factors. The results showed that the introduction of surfactants significantly influenced the reduction of 2,2',5,5'-tetrachlorinated biphenyl (PCB-52) by altering the contact between ZVI and PCB-52. An anionic surfactant was able to alleviate the adverse impact of high amounts of non-ionic surfactants and humic acid (used as representative soil organic matter) by changing their sorption behaviors, which were also influenced by the initial pH value. However, the reduction of ZVI by humic acid decreased the electron transfer efficiency of ZVI, and also reduced the contact between ZVI and PCB-52 by generating FeCO3. These results suggest that the rate-limiting process for the ZVI-RD of HOCs in the soil/sediment solution is the contact between ZVI and HOCs, which can be improved by the addition of surfactants at concentrations corresponding to the maximum adsorption capacity of HOCs on the ZVI surface.
Asunto(s)
Halogenación , Bifenilos Policlorados/química , Tensoactivos/química , Adsorción , Hierro/química , Compuestos Orgánicos , Suelo/químicaRESUMEN
Tobacco petiole biochar (TPBC) was prepared via pyrolysis and used for Cr(VI) removal. Cr(VI) removal efficiency was reduced by pyrolytic temperature (PyT) increase which mainly affected by functional groups rather than specific surface area. According to the optimal pseudo second-order kinetic, the initial adsorption rate was decreased with PyT increase from 355.91â¯mg·g-1·min-1 (PyTâ¯=â¯300⯰C) to 3.44â¯mg·g-1·min-1 (PyTâ¯=â¯700⯰C). The isotherm was optimally explained by Temkin model involved physical absorption with heat of 28.73â¯J/mol. Simulation result of adsorption-reduction-adsorption process showed the Cr(VI) removal was kinetic controlled by Cr(VI) and Cr(III) adsorptions. TPBC300 was the optimal TPBC for chromium removal from electroplating wastewater with efficiencies of: 66.7% (Cr(VI)) and 21.1% (Cr(tot)).
Asunto(s)
Carbón Orgánico , Cromo/aislamiento & purificación , Contaminantes Químicos del Agua/aislamiento & purificación , Adsorción , Concentración de Iones de Hidrógeno , Cinética , NicotianaRESUMEN
Dredging and disposal is commonly used for cleanup of contaminated sediments, leaving the relocated sediments still in need of remediation. In this study, the feasibility of two approaches to using zerovalent iron (ZVI) in conjunction with surfactants to remediate sediments contaminated by polychlorinated biphenyls (PCBs) and Ni was investigated. Approach A is surfactant desorption followed by ZVI treatment and approach B is a simple mixture of ZVI and sediment in surfactant solution. Results of approach A show that 65.24% of PCBs and 2.12% of Ni were desorbed by 1% Envirosurf; however, the sequential ZVI-mediated reductive dechlorination (ZVI-RD) was ineffective due to micelle sequestration by high contents of surfactants while Ni could be almost completely removed. For approach B, less than 1% of coexisting Ni was released to aqueous solution, and 47.18%-76.31% PCBs could be dechlorinated by ZVI with the addition of 0.04% surfactants (Tween-80 and Envirosurf). Results of dechlorination kinetics and ZVI morphologies reveal that surfactants at the concentrations as low as 0.04% were able to enhance the contact of sediment-bound PCBs with ZVI, and also to alleviate ZVI passivation. The PCB mixtures in sediment were continuously desorbed and dechlorinated, yielding lower substituted homologues that are less toxic and less hydrophobic. Thus, a simple mixture of ZVI and contaminated sediments without dewatering appears to be a promising alternative to the remediation of PCBs-contaminated sediments.
Asunto(s)
Restauración y Remediación Ambiental/métodos , Sedimentos Geológicos/química , Níquel/análisis , Bifenilos Policlorados/análisis , Halogenación , Hierro/química , Bifenilos Policlorados/química , Tensoactivos , AguaRESUMEN
Thermal treatments prior or during chemical oxidation of aged polycyclic aromatic hydrocarbon (PAH)-contaminated soils have already shown their ability to increase oxidation effectiveness. However, they were never compared on the same soil. Furthermore, oxygenated polycyclic aromatic hydrocarbons (O-PACs), by-products of PAH oxidation which may be more toxic and mobile than the parent PAHs, were very little monitored. In this study, two aged PAH-contaminated soils were heated prior (60 or 90 °C under Ar for 1 week) or during oxidation (60 °C for 1 week) with permanganate and persulfate, and 11 O-PACs were monitored in addition to the 16 US Environmental Protection Agency (US EPA) PAHs. Oxidant doses were based on the stoichiometric oxidant demand of the extractable organic fraction of soils by using organic solvents, which is more representative of the actual contamination than only the 16 US EPA PAHs. Higher temperatures actually resulted in more pollutant degradation. Two treatments were about three times more effective than the others: soil heating to 60 °C during persulfate oxidation and soil preheating to 90 °C followed by permanganate oxidation. The results of this study showed that persulfate effectiveness was largely due to its thermal activation, whereas permanganate was more sensitive to PAH availability than persulfate. The technical feasibility of these two treatments will soon be field-tested in the unsaturated zone of one of the studied aged PAH-contaminated soils.
Asunto(s)
Calor , Hidrocarburos Policíclicos Aromáticos/química , Contaminantes del Suelo/química , Suelo , Contaminación AmbientalRESUMEN
Brownfield soils may contain high levels of organic pollutants particularly polycyclic aromatic hydrocarbons (PAHs). It is essential to predict their migration and fate and to evaluate the risk of transfer to sensitive targets, such as water resources, ecosystems and human health. In this study, soil samples have been taken from an experimental contaminated site of former steel activities located at Homecourt (Lorraine, France). These samples have been lixiviated in laboratory column in water-saturated condition at room temperature. The effluent has been collected by fraction and analysed by a standard method giving total concentration of each of 16 PAHs. The breakthrough curves of 16 PAHs significantly evolve in the same way according to the volume of effluent and tend to vanish to 12-15 pore volumes. If several PAHs remain at a concentration below the solubility, others clearly exceed this threshold. Material balance sheets show that only a very small fraction of PAHs is mobilised. These results are interpreted by postulating that PAHs are transported by the solution not only in the dissolved state but also by associations with particulate or dissolved organic matter.
Asunto(s)
Hidrocarburos Policíclicos Aromáticos , Contaminantes del Suelo , Monitoreo del Ambiente , Francia , SueloRESUMEN
To assess the impact of metal-rich brownfields on groundwater quality, the fluxes in a Technosol developed on a former iron industry settling pond were studied. Intact soil monoliths (1 m(2) × 2 m) were extracted and placed in lysimeters. Dynamics of fluxes of metals and solutes under varying vegetation cover were monitored over the course of four years. Soil hydraulic properties were also determined. Results showed that the Technosol has a high retention capacity for water and metals, in relation to its mineral components and resulting chemical and physical properties. As a consequence, metal fluxes were limited. However, soluble compounds, such as SO4(2-), were found at significant concentrations in the leachates. The presence of a dense and deeply-rooted vegetation cover limited water- and solute-fluxes by increasing evapotranspiration and water uptake, thereby reducing the risks of transfer of potentially toxic compounds to local groundwater sources. However, vegetation development may induce changes in soil chemical (e.g. pH, redox potential) and physical properties (e.g. structure), favoring metal mobilization and transport. Revegetation is a valuable management solution for former iron industry settling ponds, provided vegetation does not change soil physico-chemical conditions in the long term. Monitored natural attenuation is required.
Asunto(s)
Monitoreo del Ambiente/instrumentación , Metales/análisis , Contaminantes Químicos del Agua/análisis , Biodegradación Ambiental , Monitoreo del Ambiente/métodos , Hierro , Estanques/químicaRESUMEN
Phytomining technology employs hyperaccumulator plants to take up metal in harvestable plant biomass. Harvesting, drying and incineration of the biomass generates a high-grade bio-ore. We propose that "agromining" (a variant of phytomining) could provide local communities with an alternative type of agriculture on degraded lands; farming not for food crops, but for metals such as nickel (Ni). However, two decades after its inception and numerous successful experiments, commercial phytomining has not yet become a reality. To build the case for the minerals industry, a large-scale demonstration is needed to identify operational risks and provide "real-life" evidence for profitability.
Asunto(s)
Agricultura/métodos , Metales/metabolismo , Minería/métodos , Minería/tendencias , Contaminantes del Suelo/análisis , Agricultura/economía , Agricultura/tendencias , Metales/análisis , Metales/aislamiento & purificación , Minería/economía , Minería/instrumentación , Níquel/análisis , Níquel/metabolismoRESUMEN
Effective dehalogenation by nanoscale zerovalent iron (nZVI) has been reported. In this study, the effects of Ni(2+), Cu(2+) ions, and the nonionic surfactant Tween-80 on dechlorination of 2,2',5,5'-tetrachlorinated biphenyl (PCB-52) by nZVI were investigated in aqueous solution. The rate of dechlorination was significantly enhanced by Ni(2+), while Cu(2+) had a less significant catalytic effect. Ni(2+) and Tween-80 used in combination synergistically enhanced dechlorination of PCB-52 by nZVI, although the enhancement by Tween-80 was inhibitory in the presence of Cu(2+) and insignificant in the absence of both metal ions. Congener specificity in the dechlorination pathway resulted from the preferential retention of ortho-chlorine, which restricted the formation of environmentally toxic coplanar PCB congeners. The application of nZVI dehalogenation enhanced by Ni(2+) and Tween-80 is a promising technique for posttreatment of PCB-contaminated soil washing solutions.
Asunto(s)
Bifenilos Policlorados/química , Contaminantes del Suelo/química , Compuestos de Bifenilo , Cloro , Contaminación Ambiental , Halogenación , Hierro , Metales , Níquel/química , Polisorbatos/química , Polisorbatos/metabolismo , TensoactivosRESUMEN
Ni recovery from serpentine soils by phytomining has proved feasible. Phytomining involves the crop of hyperaccumulating plants with high Ni contents and the valorization of Ni by pyro or hydrometallurgical process. In order to evaluate the Ni content of different plants, we analyzed the organs of 14 hyperaccumulators from three genera: Alyssum, Leptoplax and Bornmuellera. The highest concentration was recorded in the leaves of Leptoplax (34.3 +/- 0.7 mg g(-1)DM). Additionally, we investigated biomass combustion which is the first step of the process we designed to obtain a nickel salt. We showed that temperature and duration were important parameters to ensure a good quality of ashes. At the bench scale, the best conditions were 550 degrees C and 3 h. In this way, we obtained ashes in which Ni could reach 20 wt%. Biomass ashes can be considered as a bio-ore for recovering metal value.
Asunto(s)
Brassicaceae/metabolismo , Níquel/metabolismo , Contaminantes del Suelo/metabolismo , Biodegradación Ambiental , Biomasa , Brassicaceae/crecimiento & desarrollo , Flores/crecimiento & desarrollo , Flores/metabolismo , Níquel/análisis , Especificidad de Órganos , Hojas de la Planta/crecimiento & desarrollo , Hojas de la Planta/metabolismo , Tallos de la Planta/crecimiento & desarrollo , Tallos de la Planta/metabolismo , Semillas/crecimiento & desarrollo , Semillas/metabolismo , Suelo/química , Contaminantes del Suelo/análisis , Temperatura , Factores de TiempoRESUMEN
To better understand formation, functioning and evolution of a Technosol developing on a former settling pond of iron industry under forest cover, organic matter (OM) of layers along the soil profile was investigated. Spectroscopic and molecular analyses of extractable OM gave information on OM origin and state of preservation. In the surface layer, OM fingerprints indicated fresh input from vegetation while they revealed well preserved anthropogenic compounds related to industrial processes in deeper layers. OM variability and distribution according to the layers recorded deposition cycles of industrial effluents into the pond. Thus, the Technosol can be considered as archives of past industrial activities. The preservation of anthropogenic OM could be connected with mineralogy, high metal contents and particular physical properties of the Technosol.
Asunto(s)
Monitoreo del Ambiente/métodos , Contaminación Ambiental/estadística & datos numéricos , Sedimentos Geológicos/química , Industrias/estadística & datos numéricos , Contaminantes del Suelo/análisis , Suelo/químicaRESUMEN
The soil and groundwater at former industrial sites polluted by polycyclic aromatic hydrocarbons (PAHs) produce a very challenging environmental issue. The description of PAH transport by means of mathematical models is therefore needed for risk assessment and remediation strategies at these sites. Due to the complexity of release kinetics and transport behavior of the PAHs in the aged contaminated soils, their transport is usually evaluated at the laboratory scale. Transport parameters are then estimated from the experimental data via the inverse method. To better assess the uncertainty of optimized parameters, an estimability method was applied to firstly investigate the information content of experimental data and the possible correlations among parameters in the two-site sorption model. These works were based on the concentrations of three PAHs, Acenaphthene (ACE), Fluoranthene (FLA) and Pyrene (PYR), in the leaching solutions of the experiments under saturated and unsaturated flow conditions. The estimability results showed that the experiment under unsaturated flow conditions contained more information content for estimating four transport parameters than under the saturated one. In addition, whatever the experimental conditions for all three PAHs the fraction of sites with instantaneous sorption, f, was highly correlated with the adsorption distribution coefficient, Kd. The very strong correlation between the two parameters f and Kd suggests that they should not be simultaneously calibrated. Transport parameters were optimized using HYDRUS-1D software with different scenarios based on the estimability analysis results. The optimization results were not always reliable, especially in the case of the experiment under saturated flow conditions because of its low information content. In addition, the estimation of transport parameters became very uncertain if two parameters f and Kd were optimized simultaneously. The findings of the current work can suggest some reasons behind the optimization problems and indicate the type of experimental information additionally needed for parameter identification. To overcome the parameterization issues of PAH non-equilibrium transport, the experimental design, timescale, and model refinement need further improvement. The conclusions presented in this paper are not limited necessarily to PAHs, but may also be relevant to other organic contaminants with similar leaching behavior.
Asunto(s)
Hidrocarburos Policíclicos Aromáticos/química , Contaminantes del Suelo/química , Purificación del Agua/métodos , Modelos Teóricos , Hidrocarburos Policíclicos Aromáticos/análisis , Contaminantes del Suelo/análisis , Movimientos del AguaRESUMEN
Soils of former steel-making or coking plants have been contaminated for decades by PAHs. These soils could be cleaned up by In situ chemical oxidation (ISCO) but the low PAH availability may be a drawback. The objective of the present contribution was to study the efficiency of PAH oxidation in two aged soils compared to a spiked soil in dynamic conditions. Column experiments were performed with two oxidants: hydrogen peroxide used in modified Fenton's reaction and activated persulfate. The oxidant doses were moderate to ensure the feasibility of process upscaling. Besides, the availability of PAHs in these soils was measured by extraction with a cyclodextrin. Our results showed that oxidation was limited: the higher PAH degradation rate was 30% with the aged soils and 55% with the spiked one. PAH availability was a parameter explaining these results but no direct correlation was found between PAH extractability by the cyclodextrin and oxidation efficiency. Other parameters were also involved, such as the organic carbon content, the calcite content and the pH. This study was a first achievement before studying the influence of a number of parameters on the efficiency of PAH oxidation in aged soils.
Asunto(s)
Restauración y Remediación Ambiental/métodos , Modelos Químicos , Hidrocarburos Policíclicos Aromáticos/química , Contaminantes del Suelo/química , Oxidación-Reducción , Hidrocarburos Policíclicos Aromáticos/análisis , Suelo/química , Contaminantes del Suelo/análisisRESUMEN
An industrial coating site in activity located on a chalky plateau, contaminated by BTEX (mainly xylenes, no benzene), is currently remediated by in situ chemical oxidation (ISCO). We present the bench scale study that was conducted to select the most appropriate oxidant. Ozone and catalyzed hydrogen peroxide (Fenton's reaction) were discarded since they were incompatible with plant activity. Permanganate, activated percarbonate and activated persulfate were tested. Batch experiments were run with groundwater and groundwater-chalk slurries with these three oxidants. Total BTEX degradation in groundwater was reached with all the oxidants. The molar ratios [oxidant]:[Fe(2+)]:[BTEX] were 100:0:1 with permanganate, 100:100:1 with persulfate and 25:100:1 with percarbonate. Precipitation of either manganese dioxide or iron carbonate (siderite) occurred. The best results with chalk slurries were obtained with permanganate at the molar ratio 110:0:1 and activated persulfate at the molar ratio 110:110:1. To avoid precipitation, persulfate was also used without activation at the molar ratio 140:1. Natural Oxidant Demand measured with both oxidants was lower than 5% of initial oxidant contents. Activated percarbonate was not appropriate because of radical scavenging by carbonated media. Permanganate and persulfate were both effective at oxidant concentrations of ca 1 g kg(-1) with permanganate and 1.8 g kg(-1) with persulfate and adapted to site conditions. Activation of persulfate was not mandatory. This bench scale study proved that ISCO remediation of a chalky aquifer contaminated by mainly xylenes was possible with permanganate and activated or unactivated persulfate.
Asunto(s)
Carbonato de Calcio/química , Contaminantes Químicos del Agua/química , Contaminantes Químicos del Agua/aislamiento & purificación , Purificación del Agua/métodos , Benceno/química , Benceno/aislamiento & purificación , Derivados del Benceno/química , Derivados del Benceno/aislamiento & purificación , Carbonatos/química , Ciudades , Ingestión de Líquidos , Residuos Industriales/análisis , Compuestos de Manganeso/química , Oxidantes/química , Oxidación-Reducción , Óxidos/química , Sulfatos/química , Factores de Tiempo , Tolueno/química , Tolueno/aislamiento & purificación , Xilenos/química , Xilenos/aislamiento & purificaciónRESUMEN
Selenium is a known toxic element released in the environment by anthropogenic activities. The present study is devoted to the aqueous sorption behaviour of selenium oxyanions (selenate and selenite) on a reference oxide surface, namely rutile TiO(2). Batch sorption kinetics and isotherms have been studied using different physico-chemical conditions of the solution (changes of pH and ionic strength). The sorption was favoured for both anions in acidic conditions, in agreement with a surface complexation mechanism and CD-MUSIC predictions. Spectroscopic investigations of the sorbed rutile powder were also consistent with such a mechanism. EXAFS spectra confirmed that for selenite anions, an inner-sphere mechanism was the most probable process observed. Dynamic sorption experiments using a column filled with rutile powder also substantiated that a part of the surface complexes follows the inner-sphere mechanism, but also evidenced that an outer-sphere mechanism cannot be excluded, especially for selenate anions.
Asunto(s)
Aniones/análisis , Selenio/química , Titanio/química , Purificación del Agua/métodos , Adsorción , Electrólitos , Concentración de Iones de Hidrógeno , Iones/química , Cinética , Espectrofotometría/métodos , Espectrometría Raman/métodos , Propiedades de Superficie , Contaminantes Químicos del Agua/análisis , Difracción de Rayos XRESUMEN
Potassium permanganate, widely used in water treatment, has shown its applicability to reduce PAH contamination in groundwater and soils. The first stage to design a treatment at the site scale is the feasibility study at the bench scale, generally performed by means of batch experiments. The aim of the present contribution was to investigate the influence of two factors on PAH degradation in spiked soils, following the method of factorial designs. These factors were the weight ratio KMnO(4)/PAH and the reaction time. Three factorial designs were performed and batch experiments were run to study the degradation of phenanthrene and pyrene on soils spiked at different concentrations, between 700 and 2100 mg kg(-1). We showed that treatment with potassium permanganate significantly reduced PAH concentration, but pyrene was more recalcitrant than phenanthrene. Both variables had negative main effects and a positive two-factor interaction effect: increasing the weight ratio or the reaction time enhanced PAH degradation but the reduction produced by the two factors was lower than the sum of the individual contributions. The comparison of these results with results that we published previously under comparable conditions showed that Fenton's reagent was more efficient than potassium permanganate.