High-strength gypsum binder with improved water-resistance coefficient derived from industrial wastes.

The article presents the possibility of increasing the water resistance of gypsum binders (GBs) obtained based on synthetic gypsum by introducing additives derived from industrial wastes. Regularities were obtained for the influence of the type and amount of additives on the water/gypsum ratio (W/G), strength indicators and water resistance of high-strength GB. The introduction of a single-component additive to improve water resistance does not have a significant effect. Complex additives based on Portland cement, granulated blast-furnace slag, electric steel-smelting slag, expanded clay dust and granite screenings of various fractions have been developed that make the maximum contribution to improving the water resistance of a high-strength GB based on synthetic calcium sulphate dihydrate, which made it possible to increase the water-resistance coefficient from 0.39 to 0.82.

Low-temperature method for desiliconization of polymetallic slags by ammonium bifluoride solution.

Throughout the period of operation of non-ferrous metal deposits, a significant amount of waste has been accumulated. The accumulated waste contains valuable metals in concentrations that allow considering them as valuable raw materials. However, it is worth noticing the presence of problems that previously did not allow for more complete extraction of the target components. Such problems include the presence of significant amounts of silicon dioxide in the form of a silicate matrix, the removal of which will allow the extraction of valuable components with the elimination of industrial waste areas. The paper considers a method for removing silicon from the polymetallic slags. According to the results of the work, it was found that silicon passes into solution in the form of ammonium hexafluorosilicate. Iron, aluminum, and a number of other components react with ammonium hydrofluoride, but do not leach into the solution due to their low solubility in the resulting system. After removing silicon, the solid residue was subjected to pyrohydrolysis to obtain a product that can be subjected to magnetic separation to obtain a magnetic iron concentrate and a non-ferrous metal concentrate. The formed concentrate can later be used to extract zinc, lead, silver, etc. The productive solution was directed to the deposition of silicon with the subsequent production of silicon dioxide. The resulting solution can be directed to evaporation in order to regenerate and reuse ammonium hydrodifluoride.

Approaches for filtrate utilization from synthetic gypsum production.

Waste recycling and industrial wastewater treatment have always been of interest. A green approach was developed for the filtrate of synthetic gypsum production from water treatment coagulation sediments and spent sulfuric acid. Due to the high concentration of iron sulfate, concentrated filtrate showed good coagulation results, which were 5% lower than pure iron sulfate. In addition, a high concentration of iron facilitates its use as a precursor for synthesizing magnetic sorbents and photocatalysts. Such materials were synthesized by the solution combustion synthesis method. Oil sorption capacity reached 1.8 g/g, comparable to some synthetic materials and higher than sorption materials based on natural materials. Photodegradation of acid telon blue dye after 90 min of irradiation time was 82.7% with catalyst derived from filtrate compared to the just dye solution with 17.6% efficiency. The reaction rate constant for the photocatalyst sample was up to 11.4-fold higher compared with only UV treatment. The neutralized filtrate containing sulfur, calcium, magnesium, and sodium has been tested as a complex fertilizer. The results of bioindication for oil radish showed up to a 15% increase in the shoot length. A number of techno-economic indicators show that such an approach is advantageous from a technological, environmental, and economic point of view.