Root canal therapy used in conjunction with follow-ups for the nonsurgical handling of an enormous periapical lesion of endodontic origin: Clinical case record.

Key Clinical Message: The main objective of root canal therapy is to locate all the canals, cleaning, and shaping, and obturation to obtain fluid tight seal and to heal the periapical lesion if present. Abstract: The proper cleaning, shaping, and disinfection of the pulp chambers, as well as the filling of the canals, are critical to the efficacy of treatment with root canals. The success of an endodontically treated tooth is dependent on the accuracy of the diagnosis, disinfection, cleaning and shaping, obturation, and finally, the prosthetic rehabilitation management. Root canal therapy should provide a hermatic as well as fluid impenetrable seal which prevents the progression of periapical infection. There are two ways to treat such lesions: surgical and nonsurgical methods. If the root canal is cleaned, shaped, and sealed properly and adequately without the use of a surgical procedure, these lesions will recover during nonsurgical root canal therapy. This case series focuses primarily on the nonsurgical treatment of an enormous periapical lesion and provides evidence that these lesions respond well without surgery.

A clinical case concerning an extraordinary maxillary second molar having two separate palatal roots.

Key Clinical Message: Main objective of root canal therapy is to locate all the canals, cleaning and shaping, and obturation to obtain fluid tight seal. Failure to locate all canals can lead to the failure of root canal therapy. Abstract: Variation of pulp aperture, among teeth with multiple roots, constitutes recurring issue during diagnosing and completing efficient endodontic procedures. Understanding normal anatomy features and associated likely modifications is critical in the effective execution of the dental procedure, since the inability to effectively treat simply one canal may end up into endodontic unsuccessful therapy. The paper covers a procedure whereby the root pattern and canals of the maxillary second molar were modified employing an operative microscope and verified with cone-beam computed tomography (CBCT). Cone-beam computed tomography revealed that the maxillary second molar containing two different palatal roots and canals and two distinct buccal roots and canals. This Research paper presents and investigates the morphological difference observed on the maxillary second molar in order to guarantee the effectiveness of root canal treatment examined utilizing imaging techniques like CBCT.

Evaluation of push-out bond strength, dentinal tubule penetration and adhesive pattern of bio-ceramic and epoxy resin-based root canal sealers.

INTRODUCTION: Root canal sealing materials play a crucial role in an endodontic procedure by forming a bond between the dentinal walls and the gutta-percha. The current study aims to analyse the dentinal tubule penetration and adhesive pattern, including the push-out bond strength of six commercially available root canal sealers. METHODOLOGY: Eighty-four mandibular first premolars were split into seven groups (and n = 12), Group 1: Dia-Root, Group 2: One-Fil, Group 3: BioRoot RCS, Group 4: AH Plus, Group 5: CeraSeal, Group 6: iRoot SP, Group 7: GP without sealer (control). Two groups were made, one for dentinal tubule penetration and the other for push-out bond strength; the total sample size was one hundred sixty-eight. Root canal treatment was performed using a method called the crown down technique, and for obturation, the single cone technique was used. A confocal laser scanning microscope (Leica, Microsystem Heidel GmbH, Version 2.00 build 0585, Germany) was used to evaluate dentinal tubule penetration, and Universal Testing Machine was utilised to measure the push-out bond strength (Shimadzu, Japan) using a plunger size of 0.4 mm and speed of 1mm/min. Finally, the adhesive pattern of the sealers was analysed by HIROX digital microscope (KH-7700). Statistical analysis was carried out by a one-way Anova test, Dunnet's T3 test, and Chi-square test. RESULTS: Highest dentinal tubule penetration was noticed with One-Fil (p<0.05), followed by iRoot SP, CeraSeal, AH Plus, Dia-Root also, the most negligible value was recorded for BioRoot RCS. Meanwhile, BioRoot RCS (p<0.05) demonstrated the greater value of mean push-out bond strength, followed by One-fil, iRoot SP, CeraSeal, AH Plus and Dia-Root. Regarding adhesive pattern, most of the samples were classified as type 3 and type 4 which implies greater sealing ability and better adherence to the dentinal wall. However, BioRoot RCS revealed the most type 4 (p<0.05), followed by AH Plus, One-Fil, CeraSeal and Dia-Root. CONCLUSION: The highest dentinal tubule penetration was shown by One-Fil compared to other groups. Meanwhile, BioRoot RCS had greater push-out bond strength and more adhesive pattern than other tested materials.

Correction: Evaluation of push-out bond strength, dentinal tubule penetration and adhesive pattern of bio-ceramic and epoxy resin-based root canal sealers.

[This corrects the article DOI: 10.1371/journal.pone.0294076.].

Evaluation of bacterial leakage and marginal adaptation of the bioceramics pulp dressing materials: an invitro study.

OBJECTIVE: To compare the sealing ability and marginal adaptation of three calcium silicate-based cement (Biodentine, Pro root MTA, MTA Angelus) using a bacterial leakage model and scanning electron microscope (SEM). METHODS: Recently extracted lower first premolars were randomly categorized into three experimental groups (n = 15 samples), positive control (n = 5 samples), and negative control group (n = 5 sample). Samples from the experimental groups and positive control group were subject to cavity Class I occlusal preparation followed by modified coronal pulpotomy. Different types of bioceramic dressing material were placed in 3 mm thickness accordingly, group 1 (Biodentine), group 2 (MTA Angelus), and group 3 (ProRoot MTA). No dressing material was placed in the positive control group (group 4). All samples were placed in the incubator for 24 h at 37℃, 100% humidity, for the materials to be completely set. The final restoration was placed using the Z350 resin composite. A double layer of nail varnish was applied over all the sample surfaces except the occlusal site. Whereas the samples' surfaces in the negative control, were completely covered. A 3 mm length was measured from the root apex of the samples from each group, before proceeding with the resection. The bacterial leakage test was performed using Enterococcus faecalis TCC 23,125, and a sample from each experimental group was randomly chosen for SEM. Data analysis was conducted under the One-way ANOVA test, completed by Tukey's post hoc test. RESULTS: There is a significant difference in sealing ability and marginal adaptation between the groups. (p < 0.05). The study showed that Pro Root MTA had the superior sealing ability and marginal adaptation compared to Biodentine and MTA Angelus. CONCLUSION: The ProRoot MTA as a coronal pulpotomy pulp dressing material, was found to have a better marginal adaptation and sealing ability compared to three other bioceramics materials. The material would be the better choice during clinical settings and procedures.

Alveolar Ridge Augmentation Assessment Using a Minimalistic Approach, with and without Low-Level Laser Therapy (LLLT)-A Comparative Clinical Trial.

Background and Objective: A narrow alveolar ridge is an obstacle to optimal rehabilitation of the dentition. There are several complex and invasive techniques to counter the ridge augmentation dilemma, with most of them exhibiting low feasibility. Hence, this randomized clinical trial aims to evaluate the effectiveness of a Minimalistic Ridge Augmentation (MRA) technique, in conjunction with low-level laser therapy (LLLT). Materials and Methods: A total of 20 patients (n = 20) were selected, with 10 assigned to the test group (MRA+LLLT) and the other 10 to the control group (MRA). A vertical incision of approximately 10 mm was placed mesial to the defect and tunneled to create a subperiosteal pouch across the entire width of the defect. At the test sites, a diode laser (AnARC FoxTM Surgical Laser 810 nm) was used to deliver LLLT (parameters: 100 mW, with a maximum energy distribution of 6 J/cm2 in the continuous wave mode for 60 s per point) to the exposed bone surface inside the pouch, followed by graft (G-Graft, SurgiwearTM, Shahjahanpur, India) deposition with a bone graft carrier. The control sites were not irradiated with a laser. Results: A horizontal ridge width gain of >2 mm was observed in both groups. The changes in bone density for the test and control groups were -136 ± 236.08 HU and -44.30 ± 180.89 HU, respectively. Furthermore, there was no statistically significant difference between the test and control groups in these parameters. Conclusion: The study findings reveal that the MRA technique is relatively simple and feasible for alveolar ridge augmentation. The role of LLLT in the process requires further elucidation.

Acceptance of COVID-19 Vaccines in India: A Systematic Review and Meta-Analysis.

This systematic review and meta-analysis sought to evaluate the acceptability levels for COVID vaccine(s) in various states in India. Published articles in PubMed/Scopus/Cochrane/DOAJ/the Web of Science that focused on assessing COVID-19 vaccine hesitation/vaccine acceptance using a survey/questionnaire were included. After extensive research, 524 records were found, and after screening on the basis of eligibility criteria, only 23 papers were added to this review. Increased vaccine assumption percentage (>70%) among the population was found in two surveys nationwide (92.8%) and in Delhi (79.5%). For pooled estimates of COVID-19 vaccine acceptance and heterogeneity, twenty-three studies (23) consisting of 39,567 individuals reported for acceptance of COVID 19 vaccine in India.. Out of these, 26,028 individuals accepted the COVID-19 vaccine, giving a pooled estimate of 62.6% (95% CI: 55.6-69.4) with considerable heterogeneity (χ2 = 3397.3, p < 0.0001; I2 = 99.40%). The results of this study give a brief insight into the percentage acceptance and hesitancy among the Indian population regarding COVID-19 vaccine immunisation. Future research and vaccine education initiatives can be steered by the findings of this work as a starting point.

Evaluation of Attitude and Knowledge of Endodontic, Pedodontic and SBARD Residents in Saudi Arabia toward Regenerative Endodontics-A National Survey.

Background and Objectives: There are no guidelines on the regenerative endodontic procedures that should be followed in dental treatment. Thus, it is essential to learn the knowledge, attitudes, and opinions about regenerative endodontics among dental practitioners, particularly endodontists, as they are the first providers of this type of dental treatment. Aim: This study aimed to assess the knowledge and attitudes among residents of the Saudi Board of Advanced Restorative Dentistry (SBARD) in Saudi Arabia. Methods & Materials: A questionnaire-based survey was conducted among 128 residents of endodontics, pedodontics, and the SBARD in Saudi Arabia. The questionnaire was distributed to participants using the available electronic measures such as emails and social media. The questionnaire was made by Google Forms, and responses were received directly in the excel sheet in the email. The data were exported as an excel file, coded, and analyzed, and the p-value < 0.05 was set as significant. Results: More than 50% (74 dentists) of the participants reported receiving continuing education in regenerative treatment, with a significant difference found among specialty (p = 0.023). No significant association was found between knowledge, gender, and type of postgraduate study. The vast majority (89.1%) of the participants believed regenerative endodontics should be incorporated into dentistry curricula. About two-thirds (78.2%) of the participants declared their ability to attend future training courses in a regenerative endodontic, whereas 10.9% did not, and 10.9% were unsure. Conclusions: The dental practitioners were enthusiastic and interested in regenerative and stem cell treatment. The results also suggested incorporating regenerative treatment into the dental curriculum and signaled the need for more continued training courses.