Customizable, biocompatible implants for dorsal nasal augmentation: An in vivo pilot study of eight polylactic acid scaffold designs.

Augmentation of the nasal dorsum often requires implantation of structural material. Existing methods include autologous, cadaveric or alloplastic materials and injectable hydrogels. Each of these options is associated with considerable limitations. There is an ongoing need for precise and versatile implants that produce long-lasting craniofacial augmentation. Four separate polylactic acid (PLA) dorsal nasal implant designs were 3D-printed. Two implants had internal PLA rebar of differing porosities and two were designed as "shells" of differing porosities. Shell designs were implanted without infill or with either minced or zested processed decellularized ovine cartilage infill to serve as a "biologic rebar", yielding eight total treatment groups. Scaffolds were implanted heterotopically on rat dorsa (N = 4 implants per rat) for explant after 3, 6, and 12 months followed by volumetric, histopathologic, and biomechanical analysis. Low porosity implants with either minced cartilage or PLA rebar infill had superior volume retention across all timepoints. Overall, histopathologic and immunohistochemical analysis showed a resolving inflammatory response with an M1/M2 ratio consistently favoring tissue regeneration over the study course. However, xenograft cartilage showed areas of degradation and pro-inflammatory infiltrate contributing to volume and contour loss over time. Biomechanical analysis revealed all constructs had equilibrium and instantaneous moduli higher than human septal cartilage controls. Biocompatible, degradable polymer implants can induce healthy neotissue ingrowth resulting in guided soft tissue augmentation and offer a simple, customizable and clinically-translatable alternative to existing craniofacial soft tissue augmentation materials. PLA-only implants may be superior to combination PLA and xenograft implants due to contour irregularities associated with cartilage degradation.

Bioengineering Full-scale auricles using 3D-printed external scaffolds and decellularized cartilage xenograft.

Reconstruction of the human auricle remains a formidable challenge for plastic surgeons. Autologous costal cartilage grafts and alloplastic implants are technically challenging, and aesthetic and/or tactile outcomes are frequently suboptimal. Using a small animal "bioreactor", we have bioengineered full-scale ears utilizing decellularized cartilage xenograft placed within a 3D-printed external auricular scaffold that mimics the size, shape, and biomechanical properties of the native human auricle. The full-scale polylactic acid ear scaffolds were 3D-printed based upon data acquired from 3D photogrammetry of an adult ear. Ovine costal cartilage was processed either through mincing (1 mm3) or zesting (< 0.5 mm3), and then fully decellularized and sterilized. At explantation, both the minced and zested neoears maintained the size and contour complexities of the scaffold topography with steady tissue ingrowth through 6 months in vivo. A mild inflammatory infiltrate at 3 months was replaced by homogenous fibrovascular tissue ingrowth enveloping individual cartilage pieces at 6 months. All ear constructs were pliable, and the elasticity was confirmed by biomechanical analysis. Longer-term studies of the neoears with faster degrading biomaterials will be warranted for future clinical application. STATEMENT OF SIGNIFICANCE: Accurate reconstruction of the human auricle has always been a formidable challenge to plastic surgeons. In this article, we have bioengineered full-scale ears utilizing decellularized cartilage xenograft placed within a 3D-printed external auricular scaffold that mimic the size, shape, and biomechanical properties of the native human auricle. Longer-term studies of the neoears with faster degrading biomaterials will be warranted for future clinical application.

Use of Banked Fibula for Improved Nasal Reconstruction Following Free Fibula Midface Reconstruction.

OBJECTIVE: Anterior maxillary deficiency caused by trauma or oncologic resection presents a complex reconstructive challenge. The authors present a technique for 2-stage midface reconstruction utilizing a vascularized free fibula flap for maxillary reconstruction, followed by nasal reconstruction at a second stage utilizing a banked fibula graft. METHODS: This case series utilizes a 2-stage technique for midface reconstruction. In the first stage, a fibula-free flap was used to reconstruct the maxilla with the excess banked in the abdomen. In the second stage, this bone graft was used to restore the nasal dorsum. RESULTS: Two patients were included in this series. Patient 1 was a 28-year-old man who presented after a remote gunshot wound to his face, resulting in complete loss of his anterior maxilla and nasal support with midface collapse. Patient 2 was a 65-year-old man who presented with squamous cell carcinoma of the hard palate with extension into the maxilla and nasal septum. In both cases, the flaps healed without complication, providing midface restoration. Placement of the banked fibula graft in a second stage resulted in restoration of dorsal nasal projection. CONCLUSION: The authors describe the use of "spare" fibula parts for nasal reconstruction after loss of the maxilla and cartilaginous septum. The use of the fibula bone as a graft to restore the nasal dorsum in a delayed manner allows for a better assessment of the esthetic needs after the massive swelling from the initial surgery has abated. Further, this approach eliminates the need for a second donor site for nasal reconstruction.

Financial (dis)incentives to surgical management of head and neck cancer care.

BACKGROUND: Patients with head and neck cancer (HNC) often require complex surgical reconstruction. This retrospective, cross-sectional study compares financial factors influencing HNC and breast cancer (BC) care to examine care disparities. METHODS: Pricing data from 2012 to 2021 was abstracted from the CMS Physician Fee Schedule Look-Up Tool. Nonprofit and research support was quantified by searching the NIH, IRS, and GuideStar databases. New York State Department of Health data from 2015 to 2019 was analyzed to compare costs, charges, and payer mix. RESULTS: HNC reconstructive procedures reimburse lower than comparable breast procedures (p < 0.05). Nonprofit and research support for HNC is disproportionately low relative to disease burden. Patients hospitalized for HNC surgical procedures generated higher costs and lower charges than patients with BC (p < 0.05). CONCLUSION: Comparatively low procedure reimbursement, low nonprofit support, and high cost of care for patients with HNC relative to patients with BC may contribute to care disparities for patients with HNC.

Breast adipose tissue-derived extracellular vesicles from obese women alter tumor cell metabolism.

Breast adipose tissue is an important contributor to the obesity-breast cancer link. Extracellular vesicles (EVs) are nanosized particles containing selective cargo, such as miRNAs, that act locally or circulate to distant sites to modulate target cell functions. Here, we find that long-term education of breast cancer cells with EVs obtained from breast adipose tissue of women who are overweight or obese (O-EVs) results in increased proliferation. RNA-seq analysis of O-EV-educated cells demonstrates increased expression of genes involved in oxidative phosphorylation, such as ATP synthase and NADH: ubiquinone oxidoreductase. O-EVs increase respiratory complex protein expression, mitochondrial density, and mitochondrial respiration in tumor cells. The mitochondrial complex I inhibitor metformin reverses O-EV-induced cell proliferation. Several miRNAs-miR-155-5p, miR-10a-3p, and miR-30a-3p-which promote mitochondrial respiration and proliferation, are enriched in O-EVs relative to EVs from lean women. O-EV-induced proliferation and mitochondrial activity are associated with stimulation of the Akt/mTOR/P70S6K pathway, and are reversed upon silencing of P70S6K. This study reveals a new facet of the obesity-breast cancer link with human breast adipose tissue-derived EVs causing metabolic reprogramming of breast cancer cells.

Reducing Peri-implant Capsule Thickness in Submuscular Rodent Model of Breast Reconstruction With Delayed Radiotherapy.

INTRODUCTION: Capsular contracture remains the most common complication following device-based breast reconstruction, occurring in up to 50% of women who also undergo adjuvant radiotherapy either before or after device-based reconstruction. While certain risk factors for capsular contracture have been identified, there remains no clinically effective method of prevention. The purpose of the present study is to determine the effect of coating the implant with the novel small molecule Met-Z2-Y12, with and without delayed, targeted radiotherapy, on capsule thickness and morphologic change around smooth silicone implants placed under the latissimus dorsi in a rodent model. METHODS: Twenty-four female Sprague Dawley rats each had 2 mL smooth round silicone breast implants implanted bilaterally under the latissimus dorsi muscle. Twelve received uncoated implants and twelve received implants coated with Met-Z2-Y12. Half of the animals from each group received targeted radiotherapy (20 Gray) on postoperative day ten. At three and 6 months after implantation, the tissue surrounding the implants was harvested for analysis of capsular histology including capsule thickness. Additionally, microCT scans were qualitatively analyzed for morphologic change. RESULTS: Capsules surrounding Met-Z2-Y12-coated implants were significantly thinner (P = 0.006). The greatest difference in capsule thickness was seen in the irradiated 6-month groups, where mean capsule thickness was 79.1 ± 27.3 µm for uncoated versus 50.9 ± 9.6 µm for Met-Z2-Y12-coated implants (P = 0.038). At the time of explant, there were no capsular morphologic differences between the groups either grossly or per microCT. CONCLUSIONS: Met-Z2-Y12 coating of smooth silicone breast implants significantly reduces capsule thickness in a rodent model of submuscular breast reconstruction with delayed radiotherapy.

Successful reconstruction of full-thickness skin defects in a swine model using simultaneous split-thickness skin grafting and composite collagen microstructured dermal scaffolds.

Reconstitution of normal skin anatomy after full-thickness skin loss may be accomplished using a combination of a dermal regeneration template (DRT) and a split thickness skin graft (STSG). However, because of the relatively low rate of cell infiltration and vascularisation of currently available DRTs, reconstruction is almost always performed in a two-step procedure over the course of several weeks, resulting in multiple dressing changes, prolonged immobilisation and increased chance of infection. To mitigate the potential complications of this prolonged process, the collagen-based dermal template DermiSphere™ was developed and tested in a single-step procedure wherein DermiSphere and STSG were implanted simultaneously. When evaluated in a porcine, full thickness, excisional wound model, DermiSphere successfully supported simultaneous split thickness skin graft take and induced functional neodermal tissue deposition. When compared to a market leading product Integra Bilayer Wound Matrix, which was used in a multistep procedure (STSG placed 14 days after product implantation according to the product IFU), DermiSphere induced a similar moderate and transient inflammatory response that produced similar neodermal tissue maturity, thickness and vascularity, despite being implanted in a single surgical procedure leading to wound closure 2 weeks earlier. These data suggest that DermiSphere may be implanted in a single-step procedure with an STSG, which would significantly shorten the time course required for the reconstruction of both dermal and epidermal components of skin after full thickness loss.

Sourcing and development of tissue for transplantation in reconstructive surgery: A narrative review.

The wealth of allogeneic and xenogeneic tissue products available to plastic and reconstructive surgeons has allowed for the development of novel surgical solutions to challenging clinical problems, often obviating the need to inflict donor site morbidity. Allogeneic tissue used for reconstructive surgery enters the tissue industry through whole body donation or reproductive tissue donation and has been regulated by the FDA as human cells, tissues, and cellular and tissue-based products (HCT/Ps) since 1997. Tissue banks offering allogeneic tissue can also undergo voluntary regulation by the American Association of Tissue Banks (AATB). Tissue prepared for transplantation is sterilized and can be processed into soft tissue or bone allografts for use in surgical reconstruction, whereas non-transplant tissue is prepared for clinical training and drug, medical device, and translational research. Xenogeneic tissue, which is most often derived from porcine or bovine sources, is also commercially available and is subject to strict regulations for animal breeding and screening for infectious diseases. Although xenogeneic products have historically been decellularized for use as non-immunogenic tissue products, recent advances in gene editing have opened the door to xenograft organ transplants into human patients. Herein, we describe an overview of the modern sourcing, regulation, processing, and applications of tissue products relevant to the field of plastic and reconstructive surgery.

Long-Term Maintenance of Projection of Nipples Reconstructed Using Three-Dimensionally Printed Poly-4-Hydroxybutyrate Bioabsorbable Scaffolds.

BACKGROUND: For patients who are unable to undergo nipple-sparing mastectomy, reconstruction of the nipple-areola complex has been shown to promote greater satisfaction in cosmetic outcome, body image, and sexual relationships. Although a variety of techniques have been developed to optimize the shape, size, and mechanical properties of the reconstructed nipple-areola complex, maintenance of sustained nipple projection over time remains a challenge for plastic surgeons. METHODS: Three-dimensionally printed poly-4-hydroxybutyrate (P4HB) scaffolds were designed and fabricated filled with either mechanically minced or zested patient-derived costal cartilage, designed with an internal P4HB lattice (rebar) to provide interior structure to foster tissue ingrowth, or left unfilled. All scaffolds were wrapped within a C-V flap on the dorsa of a nude rat. RESULTS: One year after implantation, neonipple projection and diameter were well preserved in all scaffolded groups compared with nonscaffolded neonipples ( P < 0.05). Histologic analysis showed significant vascularized connective tissue ingrowth at 12 months in both empty and rebar-scaffolded neonipples and fibrovascular cartilaginous tissue formation in mechanically processed costal cartilage-filled neonipples. The internal lattice promoted more rapid tissue infiltration and scaffold degradation and best mimicked the elastic modulus of the native human nipple after 1 year in vivo. No scaffolds extruded or caused any mechanical complications. CONCLUSIONS: Three-dimensionally printed biodegradable P4HB scaffolds maintain diameter and projection while approximating the histologic appearance and mechanical properties of native human nipples after 1 year with a minimal complication profile. These long-term preclinical data suggest that P4HB scaffolds may be readily translated for clinical application. CLINICAL RELEVANCE STATEMENT: The authors' unique, three-dimensionally printed P4HB scaffolds can be used to create custom nipple scaffolds that contour to any nipple shape and size, enabling the fabrication of tissue-engineered neonipples with significantly greater projection maintenance and closely approximating desired nipple biomechanical properties.

An Antifibrotic Breast Implant Surface Coating Significantly Reduces Periprosthetic Capsule Formation.

BACKGROUND: The body responds to prosthetic materials with an inflammatory foreign body response and deposition of a fibrous capsule, which may be deleterious to the function of the device and cause significant discomfort for the patient. Capsular contracture (CC) is the most common complication of aesthetic and reconstructive breast surgery. The source of significant patient morbidity, it can result in pain, suboptimal aesthetic outcomes, implant failure, and increased costs. The underlying mechanism remains unknown. Treatment is limited to reoperation and capsule excision, but recurrence rates remain high. In this study, the authors altered the surface chemistry of silicone implants with a proprietary anti-inflammatory coating to reduce capsule formation. METHODS: Silicone implants were coated with Met-Z2-Y12, a biocompatible, anti-inflammatory surface modification. Uncoated and Met-Z2-Y12-coated implants were implanted in C57BL/6 mice. After 21, 90, or 180 days, periprosthetic tissue was removed for histologic analysis. RESULTS: The authors compared mean capsule thickness at three time points. At 21, 90, and 180 days, there was a statistically significant reduction in capsule thickness of Met-Z2-Y12-coated implants compared with uncoated implants ( P < 0.05). CONCLUSIONS: Coating the surface of silicone implants with Met-Z2-Y12 significantly reduced acute and chronic capsule formation in a mouse model for implant-based breast augmentation and reconstruction. As capsule formation obligatorily precedes CC, these results suggest contracture itself may be significantly attenuated. Furthermore, as periprosthetic capsule formation is a complication without anatomical boundaries, this chemistry may have additional applications beyond breast implants, to a myriad of other implantable medical devices. CLINICAL RELEVANCE STATEMENT: Coating of the silicone implant surface with Met-Z2-Y12 alters the periprosthetic capsule architecture and significantly reduces capsule thickness for at least 6 months postoperatively in a murine model. This is a promising step forward in the development of a therapy to prevent capsular contracture.

Obesity promotes breast epithelium DNA damage in women carrying a germline mutation in BRCA1 or BRCA2.

Obesity, defined as a body mass index (BMI) ≥ 30, is an established risk factor for breast cancer among women in the general population after menopause. Whether elevated BMI is a risk factor for women with a germline mutation in BRCA1 or BRCA2 is less clear because of inconsistent findings from epidemiological studies and a lack of mechanistic studies in this population. Here, we show that DNA damage in normal breast epithelia of women carrying a BRCA mutation is positively correlated with BMI and with biomarkers of metabolic dysfunction. In addition, RNA sequencing showed obesity-associated alterations to the breast adipose microenvironment of BRCA mutation carriers, including activation of estrogen biosynthesis, which affected neighboring breast epithelial cells. In breast tissue explants cultured from women carrying a BRCA mutation, we found that blockade of estrogen biosynthesis or estrogen receptor activity decreased DNA damage. Additional obesity-associated factors, including leptin and insulin, increased DNA damage in human BRCA heterozygous epithelial cells, and inhibiting the signaling of these factors with a leptin-neutralizing antibody or PI3K inhibitor, respectively, decreased DNA damage. Furthermore, we show that increased adiposity was associated with mammary gland DNA damage and increased penetrance of mammary tumors in Brca1+/- mice. Overall, our results provide mechanistic evidence in support of a link between elevated BMI and breast cancer development in BRCA mutation carriers. This suggests that maintaining a lower body weight or pharmacologically targeting estrogen or metabolic dysfunction may reduce the risk of breast cancer in this population.

Breast adipose tissue-derived extracellular vesicles from women with obesity stimulate mitochondrial-induced dysregulated tumor cell metabolism.

Breast adipose tissue is an important contributor to the obesity-breast cancer link. Dysregulated cell metabolism is now an accepted hallmark of cancer. Extracellular vesicles (EVs) are nanosized particles containing selective cargo, such as miRNAs, that act locally or circulate to distant sites to modulate target cell functions. Here, we found that long-term education of breast cancer cells (MCF7, T47D) with EVs from breast adipose tissue of women who are overweight or obese (O-EVs) leads to sustained increased proliferative potential. RNA-Seq of O-EV-educated cells demonstrates increased expression of genes, such as ATP synthase and NADH: ubiquinone oxidoreductase, involved in oxidative phosphorylation. O-EVs increase respiratory complex protein expression, mitochondrial density, and mitochondrial respiration in tumor cells. Mitochondrial complex I inhibitor, metformin, reverses O-EV-induced cell proliferation. Several miRNAs, miR-155-5p, miR-10a-3p, and miR-30a-3p, which promote mitochondrial respiration and proliferation, are enriched in O-EVs relative to EVs from lean women. O-EV-induced proliferation and mitochondrial activity are associated with stimulation of the Akt/mTOR/P70S6K pathway, and are reversed upon silencing of P70S6K. This study reveals a new facet of the obesity-breast cancer link with human breast adipose tissue-derived EVs causing the metabolic reprogramming of ER+ breast cancer cells.

Improving Fat Transplantation Survival and Vascularization with Adenovirus E4+ Endothelial Cell-Assisted Lipotransfer.

Autologous fat transplantation is plagued by an unpredictable and often significant degree of graft loss. AdE4+ endothelial cells (ECs) are human endothelial cells that have been transduced with the E4ORF1 region of human adenovirus type 5, resulting in long-term preservation of EC proliferation and angiogenic capability without immortalization. We hypothesized that AdE4+ EC-enriched fat grafts would demonstrate improved volume retention secondary to enhanced angiogenesis. Three experimental groups were prepared by admixing 400 µL of patient lipoaspirate with 100 µL of AdE4+ EC suspensions (high AdE4+ EC concentration-enriched [5 × 106/mL], low AdE4+ EC concentration-enriched [1.25 × 106/mL], or PBS) and injected subcutaneously into the bilateral dorsa of nude mice. Fat transplants were explanted at 90 and 180 days for volumetric and histologic analyses. After both 90 and 180 days, AdE4+ EC-enriched fat grafts showed greater mean volume preservation compared to control grafts (p < 0.05). Regions of focal necrosis were only noticed in low AdE4+ EC concentration-enriched and control groups after 180 days. Histologic analysis demonstrated the presence of healthy adipocytes in all AdE4+ EC-enriched fat grafts in which both human and host ECs were evident after 90 and 180 days. AdE4+ EC enrichment improved fat graft volume preservation and vascularization in this murine xenograft model. Though further study is warranted, AdE4+ ECs demonstrated to be promising as a potential off-the-shelf adjunct for improving the volume, quality, and consistency of fat engraftment.

Accelerated vascularization of a novel collagen hydrogel dermal template.

Full thickness skin loss is a debilitating problem, most commonly reconstructed using split thickness skin grafts (STSG), which do not reconstitute normal skin thickness and often result in suboptimal functional and esthetic outcomes that diminish a patient's quality of life. To address the minimal dermis present in most STSG, engineered dermal templates were developed that can induce tissue ingrowth and the formation of neodermal tissue. However, clinically available dermal templates have many shortcomings including a relatively slow rate and degree of neovascularization (∼2-4 weeks), resulting in multiple dressing changes, prolonged immobilization, and susceptibility to infection. Presented herein is a novel composite hydrogel scaffold that optimizes a unique scaffold microarchitecture with native hydrogel properties and mechanical cues ideal for promoting neovascularization, tissue regeneration, and wound healing. In vitro analysis demonstrated the unique combination of improved mechanical attributes with native hydrogel properties that promotes cell invasion and remodeling within the scaffold. In a novel 2-stage rat model of full thickness skin loss that closely mimics clinical practice, the composite hydrogel induced rapid cell infiltration and neovascularization, creating a healthy neodermis after only 1 week onto which a skin graft could be placed. The scaffold also elicited a gradual and favorable immune response, resulting in more efficient integration into the host. We have developed a dermal scaffold that utilizes simple but unique collagen hydrogel architectural cues that rapidly induces the formation of stable, functional neodermal tissue, which holds tremendous promise for the treatment of full thickness skin loss.

Perfuse and Reuse: A Low-Cost Three-Dimensional-Printed Perfusion Bioreactor for Tissue Engineering.

This article describes fabrication of a customizable bioreactor, which comprises a perfusion system and coverslip-based tissue culture chamber that allow centimeter-scale vascularized or otherwise canalized tissue constructs to be maintained in weeks long static and/or perfusion culture at an exceptionally low cost, with intermittent live imaging and media sampling capabilities. The perfusion system includes a reusable polydimethylsiloxane (PDMS) lid generated from a three-dimensional (3D)-printed poly-lactic acid (PLA) mold and several lengths of perfusion tubing. The coverslip tissue culture chamber includes PDMS components built with 3D-printed PLA molds, as well as 3D-printed PLA frames and glass coverslips that house perfusable hydrogel constructs. As proof of concept, we fabricated a vascularized hydrogel construct, which was subjected to static and perfusion tissue culture, as well as flow studies using fluorescent beads and widefield fluorescent microscopy. This system can be readily reproduced, promoting the advancement of tissue engineering and regenerative medicine research.

Efficient engineering of human auricular cartilage through mesenchymal stem cell chaperoning.

A major challenge to the clinical translation of tissue-engineered ear scaffolds for ear reconstruction is the limited auricular chondrocyte (hAuC) yield available from patients. Starting with a relatively small number of chondrocytes in culture results in dedifferentiation and loss of phenotype with subsequent expansion. To significantly decrease the number of chondrocytes required for human elastic cartilage engineering, we co-cultured human mesenchymal stem cells (hMSCs) with HAuCs to promote healthy elastic cartilage formation. HAuCs along with human bone marrow-derived hMSCs were encapsulated into 1% Type I collagen at 25 million/mL total cell density with different ratios (HAuCs/hMSCs: 10/90, 25/75, 50/50) and then injected into customized 3D-printed polylactic acid (PLA) ridged external scaffolds, which simulate the shape of the auricular helical rim, and implanted subcutaneously in nude rats for 1, 3 and 6 months. The explanted constructs demonstrated near complete volume preservation and topography maintenance of the ridged "helical" feature after 6 months with all ratios. Cartilaginous appearing tissue formed within scaffolds by 3 months, verified by histologic analysis demonstrating mature elastic cartilage within the constructs with chondrocytes seen in lacunae within a Type II collagen and proteoglycan-enriched matrix, and surrounded by a neoperichondrial external layer. Compressive mechanical properties comparable to human elastic cartilage were achieved after 6 months. Co-implantation of hAuCs and hMSCs in collagen within an external scaffold efficiently produced shaped human elastic cartilage without volume loss even when hAuC comprised only 10% of the implanted cell population, marking a crucial step toward the clinical translation of auricular tissue engineering.

Production of a Low-Cost, Off-the-Shelf, Decellularized Cartilage Xenograft for Tissue Regeneration.

BACKGROUND: Reconstruction of cartilaginous deformities is a well-established surgical challenge with high levels of unpredictability and complication. Because of the morbidity associated with autologous cartilage grafting, combined with its limited supply and the significant expense of commercially decellularized allografts, increasing efforts have sought to produce an acellular, nonimmunogenic cartilage xenograft. We have developed and validated a novel protocol for high throughput decellularization of ovine costal cartilage with immediate translational potential for preclinical investigation of novel strategies for cartilaginous reconstruction. METHODS: Floating ribs were isolated from freshly slaughtered rack of lamb and after cleaning, the ribs were either minced into 2-mm cubes or zested into 1-mm flakes. Tissue was then decellularized via a protocol consisting of 4 freeze/thaw cycles, digestion with trypsin, incubation in hyperosmolar and hypoosmolar salt solutions, with incubation in 1% Tween following both the hyperosmolar and hypoosmolar steps, a 48-hour incubation in nucleases, DNA elution via EDTA, and 2 terminal sterilization steps. Protocol success was evaluated via histologic analysis with hematoxylin and eosin, DAPI, and safranin-O staining, as well as DNA quantification. RESULTS: Histologic analysis of the decellularized tissue revealed a significant reduction in nuclei as evidenced by hematoxylin and eosin and DAPI staining (P < 0.01). Safranin-O staining demonstrated a depletion of glycosaminoglycan content in the decellularized cartilage but with preservation of tissue architecture. Unprocessed lamb cartilage contained 421 ± 60 ng DNA/mg of lyophilized tissue, whereas decellularized zested and minced costal cartilage contained 27 ± 2 ng DNA/mg lyophilized tissue (P < 0.0001) and 24 ± 2.3 ng DNA/mg lyophilized tissue (p < 0.0001), respectively, well below the threshold of 50 ng accepted as evidence of suitable decellularization. In comparison, commercial allograft cartilage contained 17 ± 5 ng DNA/mg of lyophilized tissue. CONCLUSIONS: We have developed a novel protocol for the decellularization of xenogeneic cartilage graft. This structurally stable, low immunogenicity decellularized cartilage can be produced at low cost in large quantities for use in preclinical investigation.

Off-the-Shelf Nipple Engineering: Neonipple Formation via Implantation of Scaffolded Decellularized Ovine Xenograft.

BACKGROUND: Nipple reconstruction is widely regarded as the final step in postmastectomy breast reconstruction. While grafts, local flaps, or combination approaches have been used in nipple reconstruction, none has been able to achieve reliable long-term projection preservation. In response, we have sought to bioengineer neonipples in situ via the implantation of processed, decellularized cartilage xenografts placed within 3-dimensional-printed polylactic acid (PLA) scaffolds. MATERIALS AND METHODS: External nipple scaffolds were designed in-house and 3-dimensional-printed with PLA filament. Decellularized ovine xenograft infill was prepared and processed by mincing or zesting. All nipple scaffolds were placed subcutaneously on the dorsa of Sprague-Dawley rats and explanted after 1, 3, and 6 months for analysis. RESULTS: Explanted nipple scaffolds demonstrated gross maintenance of scaffold shape, diameter, and projection with accompanying increases in tissue volume. Histologic analyses revealed preservation of native cartilage architecture after 6 months without evidence of degradation. Analysis of formed tissue within the scaffolds revealed a progressive invasion of fibrovascular tissue with identifiable vascular channels and adipose tissue after 6 months in vivo. Confined compression testing revealed equilibrium moduli of both minced and zested samples that were within the expected range of previously reported human nipple tissue, while these data revealed no differences in the mechanical properties of the neotissue between time points or processing techniques. CONCLUSIONS: These preliminary data support potential use of decellularized allograft to foster healthy tissue ingrowth within a PLA scaffold, thereby offering a novel solution to current limitations in nipple reconstruction.

3D-printed poly-4-hydroxybutyrate bioabsorbable scaffolds for nipple reconstruction.

Nearly all autologous tissue techniques and engineered tissue substitutes utilized for nipple reconstruction are hindered by scar contracture and loss of projection of the reconstructed nipple. The use of unprocessed costal cartilage (CC) as an internal support for the reconstructed nipple has not been widely adopted because of the excessively firm resultant construct. Herein we use a 3D-printed Poly-4-Hydroxybutyrate (P4HB) bioabsorbable scaffold filled with mechanically processed patient-derived CC to foster ingrowth of tissue in vivo to protect the regenerated tissue from contractile forces as it matures. After 6 months in vivo, newly formed spongy fibrovascular cartilaginous tissue was noted in processed CC filled 3D-printed scaffolds, which maintained significantly greater projection than reconstructions without scaffolds. Interestingly, 3D-printed P4HB scaffolds designed with an internal 3D lattice of P4HB filaments (without CC) displayed the fastest material absorption and vascularized adipose-fibrous tissue as demonstrated by SEM and histological analysis, respectively. Using 3D-printed P4HB scaffolds filled with either processed CC, a 3D P4HB lattice or no fills, we have engineered neo-nipples that maintain projection over time, while approximating the biomechanical properties of the native human nipple. We believe that this innovative 3D-printed P4HB nipple reconstruction scaffold will be readily translatable to the clinic. STATEMENT OF SIGNIFICANCE: Nearly all autologous tissue techniques and engineered tissue substitutes utilized for nipple reconstruction are hindered by scar contracture and substantial loss of projection of the reconstructed nipple, leading to significant patient dissatisfaction. Using 3D-printed P4HB scaffolds filled with either processed costal cartilage or 3D P4HB lattices, we have engineered neo-nipples that resist the forces induced by scar contracture, resulting in maintenance of neo-nipple projection over time and biomechanically approximating human nipples after 6 months in vivo implantation. This novel 3D-printed bioabsorbable P4HB scaffold will be readily translatable to the clinic to reconstruct nipples with patient-specific dimensions and long-lasting projection.

Microsurgical Head and Neck Reconstruction in Patients With Fanconi Anemia.

ABSTRACT: Patients with Fanconi anemia (FA) are at increased risk for head and neck cancers that often necessitate extensive reconstructions. Such patients have multiple comorbidities including anemia and thrombocytopenia frequently requiring bone marrow transplant, and they are at an increased risk of cancer recurrence and need for further extirpation. in the present study, charts from 3 patients with FA who underwent microvascular free tissue transfer by the senior author were retrospectively reviewed for pertinent pre- and peri-operative details in addition to functional and cosmetic outcomes. Two of these patients ultimately required metachronous free flap reconstructions for recurrence. All patients had acceptable functional and cosmetic outcomes following each instance of free flap reconstruction, thereby demonstrating the utility of microvas- cular free tissue transfer in patients with FA. The authors herein present each patient's clinical history in addition to a discussion of the current literature and an outline of our approach to these challenging cases.