Variable orthogonality of RDF - large serine integrase interactions within the ϕC31 family.

Large serine integrases are phage- (or mobile element-) encoded enzymes that catalyse site-specific recombination reactions between a short DNA sequence on the phage genome (attP) and a corresponding host genome sequence (attB), thereby integrating the phage DNA into the host genome. Each integrase has its unique pair of attP and attB sites, a feature that allows them to be used as orthogonal tools for genome modification applications. In the presence of a second protein, the Recombination Directionality Factor (RDF), integrase catalyses the reverse, excisive reaction, generating new recombination sites, attR and attL. In addition to promoting attR x attL reaction, the RDF inhibits attP x attB recombination. This feature makes the directionality of integrase reactions programmable, allowing them to be useful for building synthetic biology devices. In this report, we describe the degree of orthogonality of both integrative and excisive reactions for three related integrases (ϕC31, ϕBT1, and TG1) and their RDFs. Among these, TG1 integrase is the most active, showing near complete recombination in both attP x attB and attR x attL reactions, and the most directional in the presence of its RDF. Our findings show that there is varying orthogonality among these three integrases - RDF pairs: ϕC31 integrase was the least selective, with all three RDFs activating it for attR x attL recombination. Similarly, ϕC31 RDF was the least effective among the three RDFs in promoting the excisive activities of the integrases, including its cognate ϕC31 integrase. ϕBT1 and TG1 RDFs were noticeably more effective than ϕC31 RDF at inhibiting attP x attB recombination by their respective integrases, making them more suitable for building reversible genetic switches. AlphaFold-Multimer predicts very similar structural interactions between each cognate integrase - RDF pair. The binding surface on RDF is much more conserved than the binding surface on integrase, an indication that specificity is determined more by the integrase than the RDF. Overall, the observed weak integrase/RDF orthogonality across the three enzymes emphasizes the need for identifying and characterizing more integrase - RDF pairs. Additionally, the ability of a particular integrase's preferred reaction direction to be controlled to varying degrees by non-cognate RDFs provides a path to tunable, non-binary genetic switches.

High fidelity one-pot DNA assembly using orthogonal serine integrases.

BACKGROUND: Large serine integrases (LSIs, derived from temperate phages) have been adapted for use in a multipart DNA assembly process in vitro, called serine integrase recombinational assembly (SIRA). The versatility, efficiency, and fidelity of SIRA is limited by lack of a sufficient number of LSIs whose activities have been characterized in vitro. METHODS AND MAJOR RESULTS: In this report, we compared the activities in vitro of 10 orthogonal LSIs to explore their suitability for multiplex SIRA reactions. We found that Bxb1, ϕR4, and TG1 integrases were the most active among the set we studied, but several others were also usable. As proof of principle, we demonstrated high-efficiency one-pot assembly of six DNA fragments (made by PCR) into a 7.5 kb plasmid that expresses the enzymes of the ß-carotenoid pathway in Escherichia coli, using six different LSIs. We further showed that a combined approach using a few highly active LSIs, each acting on multiple pairs of att sites with distinct central dinucleotides, can be used to scale up "poly-part" gene assembly and editing. CONCLUSIONS AND IMPLICATIONS: We conclude that use of multiple orthogonal integrases may be the most predictable, efficient, and programmable approach for SIRA and other in vitro applications.

Structural basis for topological regulation of Tn3 resolvase.

Site-specific DNA recombinases play a variety of biological roles, often related to the dissemination of antibiotic resistance, and are also useful synthetic biology tools. The simplest site-specific recombination systems will recombine any two cognate sites regardless of context. Other systems have evolved elaborate mechanisms, often sensing DNA topology, to ensure that only one of multiple possible recombination products is produced. The closely related resolvases from the Tn3 and γδ transposons have historically served as paradigms for the regulation of recombinase activity by DNA topology. However, despite many proposals, models of the multi-subunit protein-DNA complex (termed the synaptosome) that enforces this regulation have been unsatisfying due to a lack of experimental constraints and incomplete concordance with experimental data. Here, we present new structural and biochemical data that lead to a new, detailed model of the Tn3 synaptosome, and discuss how it harnesses DNA topology to regulate the enzymatic activity of the recombinase.

Site-specific DNA recombinases alter the connectivity of DNA by recognizing specific DNA sequences, then cutting the DNA strands and pasting them together in a new configuration. Such enzymes play a variety of biological roles, often related to the dissemination of antibiotic resistance, and are also useful biotechnology tools. The simplest site-specific recombination systems will recombine any two cognate sites regardless of context. However, others have evolved elaborate mechanisms to ensure that only one of multiple possible recombination products is produced. Tn3 resolvase has long been known to be regulated by DNA topology­that is, it will cut and reconnect two target sequences only if they lie on the same DNA molecule, and if they are in the proper relative orientation. This study presents new structural and biochemical data that lead to a new, detailed model of the large protein­DNA complex formed by Tn3 resolvase and its cognate sites. This 3D model illustrates how DNA topology can be harnessed to regulate the activity of a recombinase and provides a basis for engineering Tn3 resolvase and related recombination systems as genome editing tools.

The protein-protein interactions required for assembly of the Tn3 resolution synapse.

The site-specific recombinase Tn3 resolvase initiates DNA strand exchange when two res recombination sites and six resolvase dimers interact to form a synapse. The detailed architecture of this intricate recombination machine remains unclear. We have clarified which of the potential dimer-dimer interactions are required for synapsis and recombination, using a novel complementation strategy that exploits a previously uncharacterized resolvase from Bartonella bacilliformis ("Bart"). Tn3 and Bart resolvases recognize different DNA motifs, via diverged C-terminal domains (CTDs). They also differ substantially at N-terminal domain (NTD) surfaces involved in dimerization and synapse assembly. We designed NTD-CTD hybrid proteins, and hybrid res sites containing both Tn3 and Bart dimer binding sites. Using these components in in vivo assays, we demonstrate that productive synapsis requires a specific "R" interface involving resolvase NTDs at all three dimer-binding sites in res. Synapses containing mixtures of wild-type Tn3 and Bart resolvase NTD dimers are recombination-defective, but activity can be restored by replacing patches of Tn3 resolvase R interface residues with Bart residues, or vice versa. We conclude that the Tn3/Bart family synapse is assembled exclusively by R interactions between resolvase dimers, except for the one special dimer-dimer interaction required for catalysis.

Control of ϕC31 integrase-mediated site-specific recombination by protein trans-splicing.

Serine integrases are emerging as core tools in synthetic biology and have applications in biotechnology and genome engineering. We have designed a split-intein serine integrase-based system with potential for regulation of site-specific recombination events at the protein level in vivo. The ϕC31 integrase was split into two extein domains, and intein sequences (Npu DnaEN and Ssp DnaEC) were attached to the two termini to be fused. Expression of these two components followed by post-translational protein trans-splicing in Escherichia coli generated a fully functional ϕC31 integrase. We showed that protein splicing is necessary for recombination activity; deletion of intein domains or mutation of key intein residues inactivated recombination. We used an invertible promoter reporter system to demonstrate a potential application of the split intein-regulated site-specific recombination system in building reversible genetic switches. We used the same split inteins to control the reconstitution of a split Integrase-Recombination Directionality Factor fusion (Integrase-RDF) that efficiently catalysed the reverse attR x attL recombination. This demonstrates the potential for split-intein regulation of the forward and reverse reactions using the integrase and the integrase-RDF fusion, respectively. The split-intein integrase is a potentially versatile, regulatable component for building synthetic genetic circuits and devices.

Integrating vectors for genetic studies in the rare Actinomycete Amycolatopsis marina.

BACKGROUND: Few natural product pathways from rare Actinomycetes have been studied due to the difficulty in applying molecular approaches in these genetically intractable organisms. In this study, we sought to identify more integrating vectors, using phage int/attP loci, that would efficiently integrate site-specifically in the rare Actinomycete, Amycolatopsis marina DSM45569. RESULTS: Analysis of the genome of A. marina DSM45569 indicated the presence of attB-like sequences for TG1 and R4 integrases. The TG1 and R4 attBs were active in in vitro recombination assays with their cognate purified integrases and attP loci. Integrating vectors containing either the TG1 or R4 int/attP loci yielded exconjugants in conjugation assays from Escherichia coli to A. marina DSM45569. Site-specific recombination of the plasmids into the host TG1 or R4 attB sites was confirmed by sequencing. CONCLUSIONS: The homologous TG1 and R4 attB sites within the genus Amycolatopsis have been identified. The results indicate that vectors based on TG1 and R4 integrases could be widely applicable in this genus.

Mathematical model of a serine integrase-controlled toggle switch with a single input.

Dual-state genetic switches that can change their state in response to input signals can be used in synthetic biology to encode memory and control gene expression. A transcriptional toggle switch (TTS), with two mutually repressing transcription regulators, was previously used for switching between two expression states. In other studies, serine integrases have been used to control DNA inversion switches that can alternate between two different states. Both of these switches use two different inputs to switch ON or OFF. Here, we use mathematical modelling to design a robust one-input binary switch, which combines a TTS with a DNA inversion switch. This combined circuit switches between the two states every time it receives a pulse of a single-input signal. The robustness of the switch is based on the bistability of its TTS, while integrase recombination allows single-input control. Unidirectional integrase-RDF-mediated recombination is provided by a recently developed integrase-RDF fusion protein. We show that the switch is stable against parameter variations and molecular noise, making it a promising candidate for further use as a basic element of binary counting devices.

Snapshots of a molecular swivel in action.

Members of the serine family of site-specific recombinases exchange DNA strands via 180° rotation about a central protein-protein interface. Modeling of this process has been hampered by the lack of structures in more than one rotational state for any individual serine recombinase. Here we report crystal structures of the catalytic domains of four constitutively active mutants of the serine recombinase Sin, providing snapshots of rotational states not previously visualized for Sin, including two seen in the same crystal. Normal mode analysis predicted that each tetramer's lowest frequency mode (i.e. most accessible large-scale motion) mimics rotation: two protomers rotate as a pair with respect to the other two. Our analyses also suggest that rotation is not a rigid body movement around a single symmetry axis but instead uses multiple pivot points and entails internal motions within each subunit.

Recombination directionality factor gp3 binds ϕC31 integrase via the zinc domain, potentially affecting the trajectory of the coiled-coil motif.

To establish a prophage state, the genomic DNA of temperate bacteriophages normally becomes integrated into the genome of their host bacterium by integrase-mediated, site-specific DNA recombination. Serine integrases catalyse a single crossover between an attachment site in the host (attB) and a phage attachment site (attP) on the circularized phage genome to generate the integrated prophage DNA flanked by recombinant attachment sites, attL and attR. Exiting the prophage state and entry into the lytic growth cycle requires an additional phage-encoded protein, the recombination directionality factor or RDF, to mediate recombination between attL and attR and excision of the phage genome. The RDF is known to bind integrase and switch its activity from integration (attP x attB) to excision (attL x attR) but its precise mechanism is unclear. Here, we identify amino acid residues in the RDF, gp3, encoded by the Streptomyces phage ϕC31 and within the ϕC31 integrase itself that affect the gp3:Int interaction. We show that residue substitutions in integrase that reduce gp3 binding adversely affect both excision and integration reactions. The mutant integrase phenotypes are consistent with a model in which the RDF binds to a hinge region at the base of the coiled-coil motif in ϕC31 integrase.

Gene expression in human adipose-derived stem cells: comparison of 2D films, 3D electrospun meshes or co-cultured scaffolds with two-way paracrine effects.

Finding the appropriate cues to trigger the desired differentiation is a challenge in tissue engineering when stem cells are involved. In this regard, three-dimensional environments are often compared to cells' two-dimensional culture behaviour (plastic culture dish). Here, we compared the gene expression pattern of human adipose-derived stem cells (ASC) seeded in a three-dimensional (3D) electrospun mesh and on a two-dimensional (2D) film - both of exactly the same material. Additionally, we conducted experiments with a scaffold floating above a film to investigate two-way paracrine effects (co-system). Electrospun meshes (3D scaffolds) and films (2D), consisting either of pristine poly-lactic-co-glycolic acid (PLGA) or of PLGA-containing dispersed amorphous calcium phosphate nanoparticles (PLGA/aCaP), were seeded with ASCs and cultured either in Dulbecco Minimum Essential Medium (DMEM) or in osteogenic medium. After two weeks, minimum stem cell criteria markers as well as typical markers for osteogenesis, endothelial cell differentiation, adipogenesis and chondrogenesis were analysed by quantitative real-time PCR. Interestingly, mostly osteogenic genes of cells seeded on 3D meshes were upregulated compared to those on 2D films, while stem cell markers seemed to be only slightly affected. Runx2 and osteocalcin showed an especially strong upregulation under all conditions, while most other factors analysed for 2D/3D changes were highly dependent on the material composition, the culture medium and on paracrine signalling effects. The beneficial 3D environment for stem cells found in many studies has therefore not to be attributed to the third dimension alone and should carefully be compared to 2D films fabricated of the same material. Furthermore, paracrine interactions triggering differentiation are not negligible.

Purification and In Vitro Characterization of Zinc Finger Recombinases.

Zinc finger recombinases (ZFRs) are designer site-specific recombinases that have been adapted for a variety of genome editing purposes. Due to their modular nature, ZFRs can be customized for targeted sequence recognition and recombination. There has been substantial research on the in vivo properties and applications of ZFRs; however, in order to fully understand and customize them, it will be necessary to study their properties in vitro. Experiments in vitro can allow us to optimize catalytic activities, improve target specificity, measure and minimize off-target activity, and characterize key steps in the recombination pathway that might be modified to improve performance. Here, we present a straightforward set of protocols for the expression and purification of ZFRs, an assay system for catalytic proficiency in vitro and bandshift assays for detection of sequence-specific DNA interactions.

Multipart DNA Assembly Using Site-Specific Recombinases from the Large Serine Integrase Family.

Assembling multiple DNA fragments into functional plasmids is an important and often rate-limiting step in engineering new functions in living systems. Bacteriophage integrases are enzymes that carry out efficient recombination reactions between short, defined DNA sequences known as att sites. These DNA splicing reactions can be used to assemble large numbers of DNA fragments into a functional circular plasmid in a method termed serine integrase recombinational assembly (SIRA). The resulting DNA assemblies can easily be modified by further recombination reactions catalyzed by the same integrase in the presence of its recombination directionality factor (RDF). Here we present a set of protocols for the overexpression and purification of bacteriophage ϕC31 and Bxb1 integrase and RDF proteins, their use in DNA assembly reactions, and subsequent modification of the resulting DNA assemblies.

Control of serine integrase recombination directionality by fusion with the directionality factor.

Bacteriophage serine integrases are extensively used in biotechnology and synthetic biology for assembly and rearrangement of DNA sequences. Serine integrases promote recombination between two different DNA sites, attP and attB, to form recombinant attL and attR sites. The 'reverse' reaction requires another phage-encoded protein called the recombination directionality factor (RDF) in addition to integrase; RDF activates attL × attR recombination and inhibits attP × attB recombination. We show here that serine integrases can be fused to their cognate RDFs to create single proteins that catalyse efficient attL × attR recombination in vivo and in vitro, whereas attP × attB recombination efficiency is reduced. We provide evidence that activation of attL × attR recombination involves intra-subunit contacts between the integrase and RDF moieties of the fusion protein. Minor changes in the length and sequence of the integrase-RDF linker peptide did not affect fusion protein recombination activity. The efficiency and single-protein convenience of integrase-RDF fusion proteins make them potentially very advantageous for biotechnology/synthetic biology applications. Here, we demonstrate efficient gene cassette replacement in a synthetic metabolic pathway gene array as a proof of principle.

Making serine integrases work for us.

DNA site-specific recombinases are enzymes (often associated with mobile DNA elements) that catalyse breaking and rejoining of DNA strands at specific points, thereby bringing about precise genetic rearrangements. Serine integrases are a group of recombinases derived from bacteriophages. Their unusual properties, including directionality of recombination and simple site requirements, are leading to their development as efficient, versatile tools for applications in experimental biology, biotechnology, synthetic biology and gene therapy. This article summarizes our current knowledge of serine integrase structure and mechanism, then outlines key factors that affect the performance of these phage recombination systems. Recently published studies, that have expanded the repertoire of available systems and reveal system-specific characteristics, will help us to choose the best integrases for envisaged applications.

A simplified mathematical model of directional DNA site-specific recombination by serine integrases.

Serine integrases catalyse site-specific recombination to integrate and excise bacteriophage genomes into and out of their host's genome. These enzymes exhibit remarkable directionality; in the presence of the integrase alone, recombination between attP and attB DNA sites is efficient and irreversible, giving attL and attR products which do not recombine further. However, in the presence of the bacteriophage-encoded recombination directionality factor (RDF), integrase efficiently promotes recombination between attL and attR to re-form attP and attB The DNA substrates and products of both reactions are approximately isoenergetic, and no cofactors (such as adenosine triphosphate) are required for recombination. The thermodynamic driving force for directionality of these reactions is thus enigmatic. Here, we present a minimal mathematical model which can explain the directionality and regulation of both 'forward' and 'reverse' reactions. In this model, the substrates of the 'forbidden' reactions (between attL and attR in the absence of RDF, attP and attB in the presence of RDF) are trapped as inactive protein-DNA complexes, ensuring that these 'forbidden' reactions are extremely slow. The model is in good agreement with the observed in vitro kinetics of recombination by ϕC31 integrase, and defines core features of the system necessary and sufficient for directionality.

Genome Integration and Excision by a New Streptomyces Bacteriophage, ϕJoe.

Bacteriophages are the source of many valuable tools for molecular biology and genetic manipulation. In Streptomyces, most DNA cloning vectors are based on serine integrase site-specific DNA recombination systems derived from phage. Because of their efficiency and simplicity, serine integrases are also used for diverse synthetic biology applications. Here, we present the genome of a new Streptomyces phage, ϕJoe, and investigate the conditions for integration and excision of the ϕJoe genome. ϕJoe belongs to the largest Streptomyces phage cluster (R4-like) and encodes a serine integrase. The attB site from Streptomyces venezuelae was used efficiently by an integrating plasmid, pCMF92, constructed using the ϕJoe int-attP locus. The attB site for ϕJoe integrase was occupied in several Streptomyces genomes, including that of S. coelicolor, by a mobile element that varies in gene content and size between host species. Serine integrases require a phage-encoded recombination directionality factor (RDF) to activate the excision reaction. The ϕJoe RDF was identified, and its function was confirmed in vivo Both the integrase and RDF were active in in vitro recombination assays. The ϕJoe site-specific recombination system is likely to be an important addition to the synthetic biology and genome engineering toolbox.IMPORTANCEStreptomyces spp. are prolific producers of secondary metabolites, including many clinically useful antibiotics. Bacteriophage-derived integrases are important tools for genetic engineering, as they enable integration of heterologous DNA into the Streptomyces chromosome with ease and high efficiency. Recently, researchers have been applying phage integrases for a variety of applications in synthetic biology, including rapid assembly of novel combinations of genes, biosensors, and biocomputing. An important requirement for optimal experimental design and predictability when using integrases, however, is the need for multiple enzymes with different specificities for their integration sites. In order to provide a broad platform of integrases, we identified and validated the integrase from a newly isolated Streptomyces phage, ϕJoe. ϕJoe integrase is active in vitro and in vivo The specific recognition site for integration is present in a wide range of different actinobacteria, including Streptomyces venezuelae, an emerging model bacterium in Streptomyces research.

Clinical outcomes of gamma-irradiated sterile cornea in aqueous drainage device surgery: a multicenter retrospective study.

PurposeThe purpose of the study was to evaluate the safety and efficacy of gamma-irradiated sterile cornea (GISC) for covering the tube in aqueous drainage device (ADD) surgery in a retrospective, multicenter case series.Patients and methodsParticipants included 297 patients (321 procedures) who had undergone ADD surgery for the first time using GISC patch at three clinic centers in the United States between April 2009 and July 2012. The medical records of those consecutive patients were reviewed. Preoperative, intraoperative, and postoperative parameters about GISC were collected and analyzed. The main outcome measures were patch graft failure (PGF) and postoperative complications related to GISC.ResultsThree hundred and nineteen eyes in 295 patients were included in the current analysis. Ten out of the 319 eyes experienced PGF with a mean follow-up of 15.4±9.8 (SD) months. The overall cumulative PGF proportion from Kaplan-Meier analysis was 2.6% (95% CI: 0.6-4.7%) at 18 months. We detected two cases of presumed endophthalmitis related to PGF.ConclusionsGISC appears to have a reasonable success rate for preventing tube exposure related to PGF over an 18-month period. This success rate, in combination with other features of GISC (transparency and storage at room temperature), makes it a viable choice for patch graft material during ADD.

Structural snapshots of Xer recombination reveal activation by synaptic complex remodeling and DNA bending.

Bacterial Xer site-specific recombinases play an essential genome maintenance role by unlinking chromosome multimers, but their mechanism of action has remained structurally uncharacterized. Here, we present two high-resolution structures of Helicobacter pylori XerH with its recombination site DNA difH, representing pre-cleavage and post-cleavage synaptic intermediates in the recombination pathway. The structures reveal that activation of DNA strand cleavage and rejoining involves large conformational changes and DNA bending, suggesting how interaction with the cell division protein FtsK may license recombination at the septum. Together with biochemical and in vivo analysis, our structures also reveal how a small sequence asymmetry in difH defines protein conformation in the synaptic complex and orchestrates the order of DNA strand exchanges. Our results provide insights into the catalytic mechanism of Xer recombination and a model for regulation of recombination activity during cell division.

The mechanism of ϕC31 integrase directionality: experimental analysis and computational modelling.

Serine integrases, DNA site-specific recombinases used by bacteriophages for integration and excision of their DNA to and from their host genomes, are increasingly being used as tools for programmed rearrangements of DNA molecules for biotechnology and synthetic biology. A useful feature of serine integrases is the simple regulation and unidirectionality of their reactions. Recombination between the phage attP and host attB sites is promoted by the serine integrase alone, giving recombinant attL and attR sites, whereas the 'reverse' reaction (between attL and attR) requires an additional protein, the recombination directionality factor (RDF). Here, we present new experimental data on the kinetics and regulation of recombination reactions mediated by ϕC31 integrase and its RDF, and use these data as the basis for a mathematical model of the reactions. The model accounts for the unidirectionality of the attP × attB and attL × attR reactions by hypothesizing the formation of structurally distinct, kinetically stable integrase-DNA product complexes, dependent on the presence or absence of RDF. The model accounts for all the available experimental data, and predicts how mutations of the proteins or alterations of reaction conditions might increase the conversion efficiency of recombination.

Site-specific recombinases: molecular machines for the Genetic Revolution.

The fields of molecular genetics, biotechnology and synthetic biology are demanding ever more sophisticated molecular tools for programmed precise modification of cell genomic DNA and other DNA sequences. This review presents the current state of knowledge and development of one important group of DNA-modifying enzymes, the site-specific recombinases (SSRs). SSRs are Nature's 'molecular machines' for cut-and-paste editing of DNA molecules by inserting, deleting or inverting precisely defined DNA segments. We survey the SSRs that have been put to use, and the types of applications for which they are suitable. We also discuss problems associated with uses of SSRs, how these problems can be minimized, and how recombinases are being re-engineered for improved performance and novel applications.