Free-swimming bacteria transcriptionally respond to shear flow.

Surface-attached cells can sense and respond to shear flow, but planktonic (free-swimming) cells are typically assumed to be oblivious to any flow that carries them. Here, we find that planktonic bacteria can transcriptionally respond to flow, inducing expression changes that are beneficial in flow. Specifically, we use microfluidic experiments and quantitative modeling to show that in the presence of flow, planktonic Pseudomonas aeruginosa induce shear rate-dependent genes that promote growth in low-oxygen environments. Untangling this mechanism revealed that in flow, motile P. aeruginosa spatially redistribute, leading to cell density changes that activate quorum sensing, which in turn enhances the oxygen uptake rate. In diffusion-limited environments, including those commonly encountered by bacteria, flow-induced cell density gradients also independently generate oxygen gradients that alter gene expression. Mutants deficient in this flow-responsive mechanism exhibit decreased fitness in flow, suggesting that this dynamic coupling of biological and mechanical processes can be physiologically significant.

The exchange dynamics of biomolecular condensates.

A hallmark of biomolecular condensates formed via liquid-liquid phase separation is that they dynamically exchange material with their surroundings, and this process can be crucial to condensate function. Intuitively, the rate of exchange can be limited by the flux from the dilute phase or by the mixing speed in the dense phase. Surprisingly, a recent experiment suggests that exchange can also be limited by the dynamics at the droplet interface, implying the existence of an 'interface resistance'. Here, we first derive an analytical expression for the timescale of condensate material exchange, which clearly conveys the physical factors controlling exchange dynamics. We then utilize sticker-spacer polymer models to show that interface resistance can arise when incident molecules transiently touch the interface without entering the dense phase, i.e., the molecules 'bounce' from the interface. Our work provides insight into condensate exchange dynamics, with implications for both natural and synthetic systems.

Deformation dynamics of nanopores upon water imbibition.

Capillarity-driven transport in nanoporous solids is widespread in nature and crucial for modern liquid-infused engineering materials. During imbibition, curved menisci driven by high negative Laplace pressures exert an enormous contractile load on the porous matrix. Due to the challenge of simultaneously monitoring imbibition and deformation with high spatial resolution, the resulting coupling of solid elasticity to liquid capillarity has remained largely unexplored. Here, we study water imbibition in mesoporous silica using optical imaging, gravimetry, and high-resolution dilatometry. In contrast to an expected Laplace pressure-induced contraction, we find a square-root-of-time expansion and an additional abrupt length increase when the menisci reach the top surface. The final expansion is absent when we stop the imbibition front inside the porous medium in a dynamic imbibition-evaporation equilibrium, as is typical for transpiration-driven hydraulic transport in plants, especially in trees. These peculiar deformation behaviors are validated by single-nanopore molecular dynamics simulations and described by a continuum model that highlights the importance of expansive surface stresses at the pore walls (Bangham effect) and the buildup or release of contractile Laplace pressures as menisci collectively advance, arrest, or disappear. Our model suggests that these observations apply to any imbibition process in nanopores, regardless of the liquid/solid combination, and that the Laplace contribution upon imbibition is precisely half that of vapor sorption, due to the linear pressure drop associated with viscous flow. Thus, simple deformation measurements can be used to quantify surface stresses and Laplace pressures or transport in a wide variety of natural and artificial porous media.

Exact analytical solution of the Flory-Huggins model and extensions to multicomponent systems.

The Flory-Huggins theory describes the phase separation of solutions containing polymers. Although it finds widespread application from polymer physics to materials science to biology, the concentrations that coexist in separate phases at equilibrium have not been determined analytically, and numerical techniques are required that restrict the theory's ease of application. In this work, we derive an implicit analytical solution to the Flory-Huggins theory of one polymer in a solvent by applying a procedure that we call the implicit substitution method. While the solutions are implicit and in the form of composite variables, they can be mapped explicitly to a phase diagram in composition space. We apply the same formalism to multicomponent polymeric systems, where we find analytical solutions for polydisperse mixtures of polymers of one type. Finally, while complete analytical solutions are not possible for arbitrary mixtures, we propose computationally efficient strategies to map out coexistence curves for systems with many components of different polymer types.

Electrically mediated self-assembly and manipulation of drops at an interface.

The fluid-fluid interface is a complex environment for a floating object where the statics and dynamics may be governed by capillarity, gravity, inertia, and other external body forces. Yet, the alignment of these forces in intricate ways may result in beautiful pattern formation and self-assembly of these objects, as in the case of crystalline order observed with bubble rafts or colloidal particles. While interfacial self-assembly has been explored widely, controlled manipulation of floating objects, e.g. drops, at the fluid-fluid interface still remains a challenge largely unexplored. In this work, we reveal the self-assembly and manipulation of water drops floating at an oil-air interface. We show that the assembly occurs due to electrostatic interactions between the drops and their environment. We highlight the role of the boundary surrounding the system by showing that even drops with a net zero electric charge can self-assemble under certain conditions. Using experiments and theory, we show that the depth of the oil bath plays an important role in setting the distance between the self-assembled drops. Furthermore, we demonstrate ways to manipulate the drops actively and passively at the interface.

Soft matter physics of the ground beneath our feet.

The soft part of the Earth's surface - the ground beneath our feet - constitutes the basis for life and natural resources, yet a general physical understanding of the ground is still lacking. In this critical time of climate change, cross-pollination of scientific approaches is urgently needed to better understand the behavior of our planet's surface. The major topics in current research in this area cross different disciplines, spanning geosciences, and various aspects of engineering, material sciences, physics, chemistry, and biology. Among these, soft matter physics has emerged as a fundamental nexus connecting and underpinning many research questions. This perspective article is a multi-voice effort to bring together different views and approaches, questions and insights, from researchers that work in this emerging area, the soft matter physics of the ground beneath our feet. In particular, we identify four major challenges concerned with the dynamics in and of the ground: (I) modeling from the grain scale, (II) near-criticality, (III) bridging scales, and (IV) life. For each challenge, we present a selection of topics by individual authors, providing specific context, recent advances, and open questions. Through this, we seek to provide an overview of the opportunities for the broad Soft Matter community to contribute to the fundamental understanding of the physics of the ground, strive towards a common language, and encourage new collaborations across the broad spectrum of scientists interested in the matter of the Earth's surface.

High-throughput measurement of elastic moduli of microfibers by rope coiling.

There are many fields where it is of interest to measure the elastic moduli of tiny fragile fibers, such as filamentous bacteria, actin filaments, DNA, carbon nanotubes, and functional microfibers. The elastic modulus is typically deduced from a sophisticated tensile test under a microscope, but the throughput is low and limited by the time-consuming and skill-intensive sample loading/unloading. Here, we demonstrate a simple microfluidic method enabling the high-throughput measurement of the elastic moduli of microfibers by rope coiling using a localized compression, where sample loading/unloading are not needed between consecutive measurements. The rope coiling phenomenon occurs spontaneously when a microfiber flows from a small channel into a wide channel. The elastic modulus is determined by measuring either the buckling length or the coiling radius. The throughput of this method, currently 3,300 fibers per hour, is a thousand times higher than that of a tensile tester. We demonstrate the feasibility of the method by testing a nonuniform fiber with axially varying elastic modulus. We also demonstrate its capability for in situ inline measurement in a microfluidic production line. We envisage that high-throughput measurements may facilitate potential applications such as screening or sorting by mechanical properties and real-time control during production of microfibers.

Bacterial spores respond to humidity similarly to hydrogels.

Bacterial spores have outstanding properties from the materials science perspective, which allow them to survive extreme environmental conditions. Recent work by [S. G. Harrellson et al., Nature 619, 500-505 (2023)] studied the mechanical properties of Bacillus subtilis spores and the evolution of these properties with the change of humidity. The experimental measurements were interpreted assuming that the spores behave as water-filled porous solids, subjected to hydration forces. Here, we revisit their experimental data using literature data on vapor sorption on spores and ideas from polymer physics. We demonstrate that upon the change of humidity, the spores behave like rubber with respect to their swelling, elasticity, and relaxation times. This picture is consistent with the knowledge of the materials comprising the bacterial cell walls-cross-linked peptidoglycan. Our results provide an interpretation of the mechanics of bacterial spores and can help in developing synthetic materials mimicking the mechanical properties of the spores.

Building on-chip cytoskeletal circuits via branched microtubule networks.

Controllable platforms to engineer robust cytoskeletal scaffolds have the potential to create novel on-chip nanotechnologies. Inspired by axons, we combined the branching microtubule (MT) nucleation pathway with microfabrication to develop "cytoskeletal circuits." This active matter platform allows control over the adaptive self-organization of uniformly polarized MT arrays via geometric features of microstructures designed within a microfluidic confinement. We build and characterize basic elements, including turns and divisions, as well as complex regulatory elements, such as biased division and MT diodes, to construct various MT architectures on a chip. Our platform could be used in diverse applications, ranging from efficient on-chip molecular transport to mechanical nano-actuators. Further, cytoskeletal circuits can serve as a tool to study how the physical environment contributes to MT architecture in living cells.

Rapid Room-Temperature Aerosol Dehydration Versus Spray Drying: A Novel Paradigm in Biopharmaceutical Drying Technologies.

To ensure the high quality of biopharmaceutical products, it is imperative to implement specialized unit operations that effectively safeguard the structural integrity of large molecules. While lyophilization has long been a reliable process, spray drying has recently garnered attention for its particle engineering capabilities for the pulmonary route of administration. However, maintaining the integrity of biologics during spray drying remains a challenge. To address this issue, we explored a novel dehydration system based on aerosol-assisted room-temperature drying of biological formulations recently developed at Princeton University, called Rapid Room-Temperature Aerosol Dehydration. We compared the quality attributes of the bulk powder of biopharmaceutical products manufactured using this drying technology with that of traditional spray drying. For all the fragment antigen-binding formulations tested, in terms of protein degradation and aerosol performance, we were able to achieve a better product quality using this drying technology compared to the spray drying technique. We also highlight areas for improvement in future prototypes and prospective commercial versions of the system. Overall, the offered dehydration system holds potential for improving the quality and diversity of biopharmaceutical products and may pave the way for more efficient and effective production methods in the biopharma industry.

Rayleigh-Taylor Instability in Soft Viscoelastic Solids.

We present an experimental characterization of the gravity-driven Rayleigh-Taylor instability in viscoelastic solids. The instability creates periodic patterns on the free surface of the soft solids that are distinct from the previously studied elastic Rayleigh-Taylor instability. The experimental results are supported by the linear stability analysis reported here. We identify the dependence of the steady-state pattern of deformations on the gel's geometry, complex shear modulus, and surface tension. This study provides quantitative measures applicable to the design of tunable surface textures, soft machines, and 3D structures.

Volatile Droplets on Water are Sculpted by Vigorous Marangoni-Driven Subphase Flow.

The shapes of highly volatile oil-on-water droplets become strongly asymmetric when they are out of equilibrium. The unsaturated organic vapor atmosphere causes evaporation and leads to a strong Marangoni flow in the bath, unlike that previously seen in the literature. Inspecting these shapes experimentally on millisecond and submillimeter time and length scales and theoretically by scaling arguments, we confirm that Marangoni-driven convection in the subphase mechanically stresses the droplet edges to an extent that increases for organic droplets of smaller contact angle and accordingly smaller thickness. The viscous stress generated by the subphase overcomes the thermodynamic Laplace pressure. The oil droplets develop copious regularly spaced fingers, and these fingers develop spike-shaped and branched treelike structures. Unlike this behavior for single-component (surfactant-free) oil droplets, droplets composed of two miscible (surfactant-free) organic liquids develop a rim of the less volatile component along the droplet perimeter, from which jets of monodisperse smaller droplets eject periodically due to the Rayleigh-Plateau instability. When evaporation shrinks droplets to µm size, their shapes fluctuate chaotically, and ellipsoidal shapes rupture into smaller daughter droplets when subphase convection flow pulls them in opposite directions. The shape of the evaporating oil droplets is kneaded and sculpted by vigorous flow in the water subphase.

Locally optimal geometry for surface-enhanced diffusion.

Molecular diffusion in bulk liquids proceeds according to Fick's law, which stipulates that the particle current is proportional to the conductive area. This constrains the efficiency of filtration systems in which both selectivity and permeability are valued. Previous studies have demonstrated that interactions between the diffusing species and solid boundaries can enhance or reduce particle transport relative to bulk conditions. However, only cases that preserve the monotonic relationship between particle current and conductive area are known. In this paper, we expose a system in which the diffusive current increases when the conductive area diminishes. These examples are based on the century-old theory of a charged particle interacting with an electrical double layer. This surprising discovery could improve the efficiency of filtration and may advance our understanding of biological pore structures.

A calibration-free model of micropipette aspiration for measuring properties of protein condensates.

There is growing evidence that biological condensates, which are also referred to as membraneless organelles, and liquid-liquid phase separation play critical roles regulating many important cellular processes. Understanding the roles these condensates play in biology is predicated on understanding the material properties of these complex substances. Recently, micropipette aspiration (MPA) has been proposed as a tool to assay the viscosity and surface tension of condensates. This tool allows the measurement of both material properties in one relatively simple experiment, in contrast to many other techniques that only provide one or a ratio of parameters. While this technique has been commonly used in the literature to determine the material properties of membrane-bound objects dating back decades, the model describing the dynamics of MPA for objects with an external membrane does not correctly capture the hydrodynamics of unbounded fluids, leading to a calibration parameter several orders of magnitude larger than predicted. In this work we derive a new model for MPA of biological condensates that does not require any calibration and is consistent with the hydrodynamics of the MPA geometry. We validate the predictions of this model by conducting MPA experiments on a standard silicone oil of known material properties and are able to predict the viscosity and surface tension using MPA. Finally, we reanalyze with this new model the MPA data presented in previous works for condensates formed from LAF-1 RGG domains.

Evaporation of alcohol droplets on surfaces in moist air.

Droplets of alcohol-based formulations are common in applications from sanitizing sprays to printing inks. However, our understanding of the drying dynamics of these droplets on surfaces and the influence of ambient humidity is still very limited. Here, we report the drying dynamics of picoliter droplets of isopropyl alcohol deposited on a surface under controlled humidity. Condensation of water vapor in the ambient environment onto alcohol droplets leads to unexpectedly complex drying behavior. As relative humidity (RH) increases, we observed a variety of phenomena including enhanced spreading, nonmonotonic changes in the drying time, the formation of pancake-like shapes that suppress the coffee-ring effect, and the formation of water-rich films around an alcohol-rich drop. We developed a lubrication model that accounts for the coupling between the flow field within the drop, the shape of the drop, and the vapor concentration field. The model reproduces many of the experimentally observed morphological and dynamic features, revealing the presence of unusually large spatial compositional gradients within the evaporating droplet and surface-tension-gradient-driven flows arising from water condensation/evaporation at the surface of the droplet. One unexpected feature from the simulation is that water can evaporate and condense concurrently in different parts of the drop, providing fundamental insights that simpler models based on average fluxes lack. We further observed rim instabilities at higher RH that are well-described by a model based on the Rayleigh-Plateau instability. Our findings have implications for the testing and use of alcohol-based disinfectant sprays and printing inks.

Anomalous crystalline ordering of particles in a viscoelastic fluid under high shear.

Addition of particles to a viscoelastic suspension dramatically alters the properties of the mixture, particularly when it is sheared or otherwise processed. Shear-induced stretching of the polymers results in elastic stress that causes a substantial increase in measured viscosity with increasing shear, and an attractive interaction between particles, leading to their chaining. At even higher shear rates, the flow becomes unstable, even in the absence of particles. This instability makes it very difficult to determine the properties of a particle suspension. Here, we use a fully immersed parallel plate geometry to measure the high-shear-rate behavior of a suspension of particles in a viscoelastic fluid. We find an unexpected separation of the particles within the suspension resulting in the formation of a layer of particles in the center of the cell. Remarkably, monodisperse particles form a crystalline layer which dramatically alters the shear instability. By combining measurements of the velocity field and torque fluctuations, we show that this solid layer disrupts the flow instability and introduces a single-frequency component to the torque fluctuations that reflects a dominant velocity pattern in the flow. These results highlight the interplay between particles and a suspending viscoelastic fluid at very high shear rates.

A note about convected time derivatives for flows of complex fluids.

We present a direct derivation of the typical time derivatives used in a continuum description of complex fluid flows, harnessing the principles of the kinematics of line elements. The evolution of the microstructural conformation tensor in a flow and the physical interpretation of different derivatives then follow naturally.

Diffusiophoretic Particle Penetration into Bacterial Biofilms.

Bacterial biofilms are communities of cells adhered to surfaces. These communities represent a predominant form of bacterial life on Earth. A defining feature of a biofilm is the three-dimensional extracellular polymer matrix that protects resident cells by acting as a mechanical barrier to the penetration of chemicals, such as antimicrobials. Beyond being recalcitrant to antibiotic treatment, biofilms are notoriously difficult to remove from surfaces. A promising, but relatively underexplored, approach to biofilm control is to disrupt the extracellular polymer matrix by enabling penetration of particles to increase the susceptibility of biofilms to antimicrobials. In this work, we investigate externally imposed chemical gradients as a mechanism to transport polystyrene particles into bacterial biofilms. We show that preconditioning the biofilm with a prewash step using deionized (DI) water is essential for altering the biofilm so it takes up the micro- and nanoparticles by the application of a further chemical gradient created by an electrolyte. Using different particles and chemicals, we document the transport behavior that leads to particle motion into the biofilm and its further reversal out of the biofilm. Our results demonstrate the importance of chemical gradients in disrupting the biofilm matrix and regulating particle transport in crowded macromolecular environments, and suggest potential applications of particle transport and delivery in other physiological systems.

Hydration solids.

Hygroscopic biological matter in plants, fungi and bacteria make up a large fraction of Earth's biomass1. Although metabolically inert, these water-responsive materials exchange water with the environment and actuate movement2-5 and have inspired technological uses6,7. Despite the variety in chemical composition, hygroscopic biological materials across multiple kingdoms of life exhibit similar mechanical behaviours including changes in size and stiffness with relative humidity8-13. Here we report atomic force microscopy measurements on the hygroscopic spores14,15 of a common soil bacterium and develop a theory that captures the observed equilibrium, non-equilibrium and water-responsive mechanical behaviours, finding that these are controlled by the hydration force16-18. Our theory based on the hydration force explains an extreme slowdown of water transport and successfully predicts a strong nonlinear elasticity and a transition in mechanical properties that differs from glassy and poroelastic behaviours. These results indicate that water not only endows biological matter with fluidity but also can-through the hydration force-control macroscopic properties and give rise to a 'hydration solid' with unusual properties. A large fraction of biological matter could belong to this distinct class of solid matter.