Computed tomography-derived structural analysis for the likelihood of pathologic fracture in canine antebrachial osteosarcoma.

Determining the risk of pathologic fracture in dogs with a primary bone tumor would aid in case selection for in-situ treatment options. Prior research found strong relationships between in vitro strength of canine antebrachii with primary bone tumors and CT-derived metrics. This study assesses the prognosis for pathologic fracture in dogs with distal radial bone tumors using CT-derived structural analysis metrics. CT images of the antebrachium in dogs with aggressive osseous lesions of the radius were used to calculate structural rigidity and failure forces, including axial rigidity (AR), craniocaudal bending rigidity (BR), torsional rigidity (TR), and failure forces for a slightly-curved/asymmetric beam (Fs) or a curved beam (Fc). Metrics were compared with the clinical outcome of radial fracture. Eight of 19 dogs with CT-derived metrics developed a radial fracture. The prognostic potential of the metrics to discriminate fractured and nonfractured bones was analyzed using receiver operating characteristic curves (area under the curve), stepwise logistic regression, and classification regression (CART) analyses. Fc was the most sensitive and specific metric for prognosing fracture occurrence (AUC = 0.864). When dog body weight (BW) was included, all five metrics had AUC > 0.705. Fc was the best predictor of fracture using stepwise logistic regression and CART analysis, followed by BR. An indication of fracture probability can be determined by normalizing Fc or BR with dog BW or by using the logistic regression equation of either metric with dog BW. Results warrant further analysis of a larger cohort to evaluate fracture likelihood in dogs with antebrachial bone neoplasia.

Condylar fracture location is correlated to exercise history in Thoroughbred racehorses.

BACKGROUND: Condylar fractures are a major cause of morbidity and mortality in Thoroughbred racehorses. Condylar fractures have a variety of fracture configurations that suggest there may be differences in aetiopathogenesis. OBJECTIVE: To determine if exercise history differs with condylar fracture location in a population of Thoroughbred racehorses. STUDY DESIGN: Retrospective analysis of clinical and exercise data. METHODS: Exercise history of Thoroughbred racehorses that had condylar fracture repair between 1 January 2018 and 28 February 2021 was compared between racehorses that had fractures located radiographically either within the parasagittal groove (PSG) or abaxial to the PSG (non-PSG). Age, sex, and last event (race, timed work) matched control groups were compared between the PSG and non-PSG groups. Additionally, exercise history variables of both groups were each compared with a group-specific control population, each consisting of three control racehorses of equivalent age and sex matched to each affected racehorse by last event (race or official timed work) before fracture. RESULTS: Eighty-two horses with 84 fractures (45 PSG, 39 non-PSG) met inclusion criteria. Age was not different between groups (PSG: 3.4 ± 1.3 years [mean ± SD], non-PSG: 3.7 ± 1.3, p = 0.3). Number of races (PSG: 5.3 ± 7.1, non-PSG: 11.4 ± 8.9, p < 0.001), total race furlongs (PSG: 38.2 ± 54.7, non-PSG: 79.2 ± 64, p = 0.003), and number of active days (PSG: 304 ± 224, non-PSG: 488 ± 314, p = 0.003) before fracture were greater; while mean number of layups was fewer (PSG: 1.0 ± 1.2, non-PSG: 0.5 ± 0.7, p = 0.02) in horses with non-PSG fracture. Horses with non-PSG fracture had more differences compared with their respective control group than horses with PSG fractures. Outcomes following fracture repair were not different between groups. MAIN LIMITATIONS: Retrospective study, one regional racehorse population, two-dimensional imaging and potential inherent bias for fracture localisation, low statistical power for return to performance analysis. CONCLUSIONS: Thoroughbred racehorses with non-PSG condylar fractures have a more extensive exercise history than horses with PSG condylar fractures, suggesting differences in fracture aetiopathogenesis.

CONTEXTO: Fraturas condilares são uma das principais causas de morbidade e mortalidade em cavalos de corrida puro­sangue inglês. As fraturas condilares apresentam uma variedade de configurações que sugerem que pode haver diferenças em suas etiopatogenia. OBJETIVO: Determinar se o histórico de exercícios difere com a localização da fratura condilar em uma população de cavalos de corrida puro­sangue inglês. DELINEAMENTO DO ESTUDO: Análise retrospectiva de dados clínicos e de exercício. MÉTODOS: O histórico de exercícios de cavalos de corrida puro­sangue inglês que tiveram reparo de fratura condilar entre 1 de janeiro de 2018 e 28 de fevereiro de 2021 foi comparado entre cavalos de corrida que tiveram fratura localizada radiograficamente dentro da ranhura parasagital (RPS) ou abaxial à RPS (não RPS). Os grupos foram pareados de acordo com a idade, sexo e último evento (corrida ou trabalho cronometrado) para comparação de RPS e não RPS. Além disso, as variáveis de histórico de exercícios de ambos os grupos foram comparadas a uma população de controle específica, cada uma consistindo em três cavalos de corrida de controle com idade e sexo equivalentes combinados com cada cavalo de corrida afetado pelo último evento (corrida ou trabalho cronometrado oficial) antes da fratura. RESULTADOS: Oitenta e dois cavalos com 84 fraturas (45 RPS, 39 não RPS) atenderam aos critérios de inclusão. A idade não foi diferente entre os grupos (RPS: 3,4 ± 1,3 anos (média ± DP), não RPS: 3,7 ± 1,3, p=0,3). O número de corridas (RPS: 5,3 ± 7,1, não RPS: 11,4 ± 8,9, p<0,001), furlongs totais de corrida (RPS: 38,2 ± 54,7, não RPS: 79,2 ± 64, p=0,003) e número de dias ativos (RPS: 304 ± 224, não RPS: 488 ± 314, p=0,003) antes da fratura foram maiores; enquanto o número médio de repousos foi menor (RPS: 1,0 ± 1,2, não RPS: 0,5 ± 0,7, p=0,02) em cavalos com fratura não RPS. Cavalos com fratura não RPS tiveram mais diferenças em comparação com seu grupo controle respectivo do que cavalos com fraturas RPS. Os resultados após o reparo da fratura não foram diferentes entre os grupos. PRINCIPAIS LIMITAÇÕES: Estudo retrospectivo, uma população regional de cavalos de corrida, imagens bidimensionais e viés inerente potencial para localização de fraturas, baixo poder estatístico para análise de retorno ao desempenho. CONCLUSÕES: Cavalos de corrida puro­sangue inglês com fraturas condilares não RPS têm um histórico de exercícios mais extenso do que cavalos com fraturas condilares RPS, sugerindo diferenças na etiopatogenia das fraturas.

K-wire is more damaging than standard or acrylic drill bits when evaluating torsional properties of rabbit (Oryctolagus cuniculi) femurs.

OBJECTIVE: The objective of this study is to compare drilling variables and torsional mechanical properties of rabbit femora after bicortical drilling with a 1.5-mm standard surgical drill bit, acrylic drill bit, and K-wire. SAMPLES: 24 pairs of rabbit femora. METHODS: After drilling under controlled axial displacement rate, each bone was biaxially loaded in compression followed by rapid external torsion to failure. Maximum axial thrust force, maximum drill torque, integral of force and displacement, change in temperature, maximum power spectral density of the torque signal, torque vibration, and torque and angle at the yield and failure points were collected. Pre- and postyield stiffness, yield and failure energies, and postyield energy were calculated. RESULTS: The work required to drill through the cis- and transcortices (integral of force and displacement) was greater for the K-wire, followed by the acrylic and then standard drill bits, respectively. The K-wire demonstrated higher maximum torque than the drill bits at the ciscortex, and the force of drilling was significantly greater. The vibration data was greater with the acrylic and standard drill bits than the K-wire. There was no difference in torsional strength between drilling types. CLINICAL RELEVANCE: Mechanical differences exist between different drill bits and K-wire and demonstrate that the K-wire is overall more damaging than the surgical drill bit.

Ex vivo biomechanical evaluation of an adhered fiberglass and polymethyl methacrylate sole-hoof wall cast on stabilization of type III distal phalanx fractures under simulated physiologic midstance loads.

OBJECTIVE: To evaluate the effect of the application of a novel fiberglass-glue cast (FGC) on the fracture gap width in experimentally created type III distal phalanx fractures in cadaveric specimens under simulated physiologic loads. STUDY DESIGN: Ex vivo biomechanical laboratory study. ANIMALS: Nine unilateral adult equine cadaver forelimbs. METHODS: Type III distal phalanx fractures were created in forelimb specimens, which maintained distal components of the passive stay apparatus. The fracture gap was measured at 5%, 20%, 25%, 50%, 75%, and 95% of fracture length (palmar articular border to solar margin) using D65Pr-PaDiO radiographs. The limb was axially loaded (700, 3600, 4600, and 6700 N) before, during, and after removal of a woven fiberglass cloth and polymethyl methacrylate cast that encompassed the sole and distal portion of the hoof wall (FGC). Fracture gap widths were compared among loads and treatments using a mixed model ANOVA. RESULTS: On average, under simulated physiological midstance loads, the fracture gap width was 0.2 mm smaller after FGC application, with the greatest decrease (0.5 mm) near the articular surface. On average, it was 0.3 mm smaller than after FGC removal. Fracture gap width was 0.1 mm greater when midstance loads transitioned from standing load to walking, trotting, and gallop loads. The fracture gap width increased by 1.3 mm with increasing distance from the articular surface. CONCLUSION: The FGC reduced the fracture gap width and prevented the fracture gap widening that occurred after FGC removal. CLINICAL SIGNIFICANCE: The findings support consideration of FGC use in the treatment of horses with type III distal phalangeal fractures.

Hoof Expansion, Deformation, and Surface Strains Vary with Horseshoe Nail Positions.

Racehorses are susceptible to underrun heel hoof conformation. Racehorses are often shod with nails placed toward the heel. It is unknown if palmar nails restrict or alter hoof deformation in a manner that could promote the development of underrun heel conformation over time with repeated loading. To determine how the addition of palmar nails affects heel deformation during limb loading, hoof expansion and hoof wall deformations were quantified using rosette strain gauges and kinematic markers during in the vitro limb loading of cadaveric limbs that simulated midstance for walk, trot, and canter loads. Nail treatments used to attach a horseshoe to the hoof included: toe nails (T), toe and quarter nails (TQ), and toe, quarter, and heel nails (TQH). The effects of nail treatment on heel expansion and hoof wall deformations were assessed using repeated measures analysis of variance (p < 0.05). Nails placed palmar to the quarters of the hoof decreased heel expansion (p < 0.001). Heel nails resulted in the largest changes in hoof wall principal strain directions distally. The application of nails palmar to the hoof quarters alters hoof wall deformation during limb loading. The continued loading of the hoof with palmer nails could alter hoof conformation over time.

Effects of Jumping Phase, Leading Limb, and Arena Surface Type on Forelimb Hoof Movement.

During the stance phase of equine locomotion, ground reaction forces are exerted on the hoof, leading first to rapid deceleration ("braking") and later to acceleration ("propulsion") as the hoof leaves the ground. Excessive hoof deceleration has been identified as a risk factor for musculoskeletal injury and may be influenced by arena surface properties. Therefore, our objective was to evaluate the effect of arena surface type (dirt, synthetic) on hoof translation of the leading and trailing forelimbs during jump takeoff and landing. Solar hoof angle, displacement, velocity, and deceleration were captured using kinematic markers and high-speed video for four horses jumping over a 1.1 m oxer at 12 different arenas (5 dirt, 7 synthetic). Surface vertical impact and horizontal shear properties were measured simultaneously. The effects of surface type (dirt, synthetic), jump phase (takeoff, landing), and limb (leading, trailing) on hoof movement were assessed using ANOVA (p < 0.05), while the relationships of hoof movement with surface mechanical properties were examined with correlation. Slide time (p = 0.032), horizontal velocity of the hoof (p < 0.001), and deceleration (p < 0.001) were greater in the leading limb, suggesting a higher risk of injury to the leading limb when braking. However, surface type and jump phase did not significantly affect deceleration during braking.

Biomechanical comparison of compact versus standard flute drill bits, and interlocking versus buttress thread self-tapping cortical bone screws in cadaveric equine third metacarpal condyle.

OBJECTIVES: To compare (1) performance of compact versus standard flute drill bits, (2) screw insertion properties and (3) pullout variables between interlocking thread (ITS) and buttress thread (BTS) self-tapping screws in third metacarpi. STUDY DESIGN: In vitro experimental study. SAMPLE POPULATION: Paired third metacarpi from 11 Thoroughbreds aged 2-4 years. METHODS: Screws were inserted into the lateral condylar fossae following bone preparation using the respective drill bit for each screw type. Screw pullout was achieved using a mechanical testing system. Density and porosity of bone surrounding screw holes was measured with microcomputed tomography following each pullout test. Drilling, screw insertion and pullout variables were compared between drill bit and screw types using repeated measures ANOVA. Linear regression analyses were used to characterize relationships between bone tissue properties and drill bit and screw outcomes. RESULTS: Maximum torque power spectral density (PSD) was lower for compact flute drill bits. Insertion torque was 50% higher for ITS. BTS had 33% greater preyield stiffness and 7% greater mean yield force. Bone tissue properties affected measured variables similarly for both screw and drill bit types. CONCLUSIONS: Lower torque PSD may increase durability of the compact flute drill bit. ITS had greater insertional torque, which may reflect greater bone engagement. BTS had greater resistance to axial pullout forces. CLINICAL SIGNIFICANCE: Metacarpal bone provides a simple model for comparison of drill bit and screw designs. Use of ITS to repair equine fractures subject to predominantly tensile forces is not justified based on the results of this study.

Training drives turnover rates in racehorse proximal sesamoid bones.

Focal bone lesions are often found prior to clinically relevant stress-fractures. Lesions are characterized by low bone volume fraction, low mineral density, and high levels of microdamage and are hypothesized to develop when bone tissue cannot sufficiently respond to damaging loading. It is difficult to determine how exercise drives the formation of these lesions because bone responds to mechanical loading and repairs damage. In this study, we derive steady-state rate constants for a compartment model of bone turnover using morphometric data from fractured and non-fractured racehorse proximal sesamoid bones (PSBs) and relate rate constants to racing-speed exercise data. Fractured PSBs had a subchondral focus of bone turnover and microdamage typical of lesions that develop prior to fracture. We determined steady-state model rate constants at the lesion site and an internal region without microdamage using bone volume fraction, tissue mineral density, and microdamage area fraction measurements. The derived undamaged bone resorption rate, damage formation rate, and osteoid formation rate had significant robust regression relationships to exercise intensity (rate) variables, layup (time out of exercise), and exercise 2-10 months before death. However, the direction of these relationships varied between the damaged (lesion) and non-damaged regions, reflecting that the biological response to damaging-loading differs from the response to non-damaging loading.

Biomechanical evaluation of locking versus nonlocking 2.0-mm malleable L-miniplate fixation of simulated caudal mandibular fractures in cats.

OBJECTIVE: To evaluate the biomechanical properties of the mandibles of cats with experimentally created osteotomies simulating oblique ramus fractures, which were stabilized with malleable L-miniplates with either locking screws [locking construct (LC)] or nonlocking screws [nonlocking construct (NLC)], compared with those for intact mandibles. SAMPLES: 20 mandibles from 10 adult cat cadavers. PROCEDURES: A block study design was adopted to allocate the mandibles of each cadaver to 2 of the 3 test groups (LC, NLC, or intact mandible). Mandibles within each cadaver were allocated systematically to a test group. For mandibles assigned to an LC and an NLC, a complete oblique osteotomy was performed from the mid rostral aspect of the ramus in a caudoventral direction. All mandibles were loaded in a single-load-to-failure test through cantilever bending. Load and actuator displacement were recorded simultaneously. Mode of failure and radiographic evidence of damage to tooth roots and the mandibular canal were evaluated. Biomechanical properties were compared among the groups. RESULTS: No iatrogenic tooth root damage was evident, but all mandibles with an LC and an NLC had evidence of screw invasion into the mandibular canal. Plated mandibles had significantly less stiffness and bending moment than intact mandibles. Stiffness was not significantly different between the LC and the NLC; the NLC had a greater bending moment at failure than the LC. The pre-yield stiffness of plated mandibles decreased when the number of screw holes overlapping the mandibular canal increased. CLINICAL RELEVANCE: The use of a malleable L-miniplate in a caudal mandibular fracture model is feasible. Both the LC and the NLC were inferior mechanically to intact mandibles. Type of construct used did not affect the construct stiffness significantly in tested mandibles.

Exercise history predicts focal differences in bone volume fraction, mineral density and microdamage in the proximal sesamoid bones of Thoroughbred racehorses.

Medial proximal sesamoid bones (PSBs) from Thoroughbred racehorses that did (Case) or did not (Control) experience unilateral biaxial PSB fracture were evaluated for bone volume fraction (BVF), apparent mineral density (AMD), tissue mineral density (TMD), and microdamage in Case fractured, Case contralateral limb intact, and Control bones. A majority of Case bones had a subchondral lesion with high microdamage density, and low BVF, AMD, and TMD. Lesion microdamage and densitometric measures were associated with training history by robust linear regression. Exercise intensity was negatively related to BVF (0.07 ≤ R2 ≤ 0.12) and positively related to microcrack areal density (0.21 ≤ R2 ≤ 0.29) in the lesion; however, in an undamaged site, the relationships were opposite in direction. Regardless of location, TMD decreased with event frequency for both Case and Control, suggesting increased bone remodeling with exercise. Measures of how often animals were removed from active training (layups) predicted a decrease in TMD, AMD, BVF, and microdamage at regions away from the lesion site. A steady-state compartment model was used to organize the differences in the correlations between variables within the data set. The overall conclusions are that at the osteopenic lesion site, repair of microdamage by remodeling was not successful (e.g., lower bone mass, increased damage, and lower mineralization) but that in regions away from the lesion remodeling successfully controlled damage (e.g., higher bone mass, less microdamage, and lower mineralization).

A Coupled Biomechanical-Smoothed Particle Hydrodynamics Model for Horse Racing Tracks.

Distal limb injuries are common in racing horses and track surface properties have been associated with injury risk. To better understand how track surfaces may contribute to equine limb injury, we developed the first 3D computational model of the equine hoof interacting with a racetrack and simulated interactions with model representations of 1) a dirt surface and 2) an all-weather synthetic track. First, a computational track model using the Smoothed Particle Hydrodynamics (SPH) method with a Drucker-Prager (D-P) elastoplastic material model was developed. It was validated against analytical models and published data and then calibrated using results of a custom track testing device applied to the two racetrack types. Second, a sensitivity analysis was performed to determine which model parameters contribute most significantly to the mechanical response of the track under impact-type loading. Third, the SPH track model was coupled to a biomechanical model of the horse forelimb and applied to hoof-track impact for a horse galloping on each track surface. We found that 1) the SPH track model was well validated and it could be calibrated to accurately represent impact loading of racetrack surfaces at two angles of impact; 2) the amount of harrowing applied to the track had the largest effect on impact loading, followed by elastic modulus and cohesion; 3) the model is able to accurately simulate hoof-ground interaction and enables study of the relationship between track surface parameters and the loading on horses' distal forelimbs.

In vitro motions of the medial and lateral proximal sesamoid bones under mid-stance load conditions are consistent with racehorse fracture configurations.

Proximal sesamoid bone (PSB) fractures in racehorses are likely fatigue fractures that occur due to repetitive loads and stress remodeling. The loading circumstances that may induce damage in the PSBs are not well understood. The goal of this study was to determine in three-dimensions, PSB motions relative to the opposing metacarpal condyle during simulated mid-stance loads. Seven equine cadaveric forelimbs were axially loaded in a material testing system to simulate standing and mid-stance walk, trot, and gallop load conditions (1.8-10.5 kN). Joint angles were determined by tracking the positions of bone-fixed kinematic markers. Internal-external rotation, abduction-adduction, and flexion-extension of each PSB relative to the third metacarpal condyle were compared between loads and between PSBs using an ANOVA with Tukey-Kramer post hoc tests for pairwise comparisons. The medial PSB rotated externally and the lateral PSB apex abducted during limb loading. Medial PSB external rotation was significantly greater at the gallop load condition than at the walk or trot load conditions. The medial and lateral PSB motions observed in this study are consistent with location of fatigue damage and fracture configurations frequently seen in medial and lateral PSBs from Thoroughbred racehorses. Specifically, medial PSB external rotation is consistent with the development of an abaxial subchondral medial PSB lesion that is reported in association with medial PSB transverse fracture and lateral PSB abduction is consistent with axial longitudinal fracture of the lateral PSB.

Influence of interlocking thread screws to repair simulated adult canine humeral condylar fractures.

OBJECTIVE: To determine the influence of interlocking screw threads on the biomechanical properties of repaired canine humeral condylar fractures. STUDY DESIGN: Ex vivo biomechanical study. SAMPLE POPULATION: Thirty-six humeral condyles. METHODS: Simulated fractures of the lateral aspect of the humeral condyle were stabilized by a 3.5 mm interlocking thread screw (ITS) or 3.5 mm buttress thread screw placed in lag (BTS-L) or positional fashion (BTS-P) and axially loaded at a walk, trot, 2-mm displacement, and failure cycles. Compact flute drill bits (CFBs) were used for ITS constructs and standard flute drill bits (SFB) for BTS constructs. The effects of bit type on drilling parameters and screw type on screw insertion properties and fragment stability were assessed. RESULTS: CFB produced a 6°C greater temperature increase (p = .042) and required 20 N higher torque (p = .003) than SFB. Insertional torque was greater for ITS than BTS-P (p = .001) and BTS-L (p = .001). Condylar fragment rotation at failure was lower in ITS (lsmean ± SE, 8.3° ± 1.9°) than BTS-L constructs (14.5° ± 2.3°, p = .011). ITS resisted greater loads (1503 ± 105 N) than BTS-P (1189 ± 99 N, p = .038) but not BTS-L (1249 ± 123 N, p = .121) constructs. CONCLUSION: Biomechanical performance of constructs was improved with ITS rather than BTS fixation. CLINICAL SIGNIFICANCE: ITS can be considered for stabilization of humeral condylar fractures in adult dogs.

Sudden death caused by spinal cord injury associated with vertebral fractures and fetlock failure in a Thoroughbred racehorse.

The most prevalent causes of death in racehorses are musculoskeletal injuries, causing ~83% of deaths within the racing industry in California and elsewhere. The vast majority of these injuries have preexisting lesions that predispose to fatal injury. A 4-y-old Thoroughbred colt suffered an acute suspensory apparatus failure, including biaxial proximal sesamoid bone fractures of the right front fetlock, causing loss of support of the fetlock joint and consequent fall with fractures of the cervical and sacral spine. Cervical fracture caused spinal cord damage that resulted in sudden death. A preexisting lesion in the medial proximal sesamoid bone likely predisposed to complete fracture of this bone and fetlock breakdown. Interestingly, a comparable osteopenic lesion was present in the intact medial proximal sesamoid bone of the left forelimb, which is consistent with bilateral repetitive overuse injury in racehorses. The morphologic features of the cervical and sacral spine fractures were compatible with acute injury; no evidence of preexisting lesions was seen. Most likely, these acute vertebral fractures occurred as a result of the horse falling. This case emphasizes the importance of performing a detailed autopsy in horses that suffer an appendicular musculoskeletal injury, particularly in fatal cases when the horse dies following a leg injury.

How does bone strain vary between the third metacarpal and the proximal phalangeal bones of the equine distal limb?

Strain parameters at injury prone sites of the equine third metacarpal (MC3) and proximal phalangeal (P1) bones were investigated with the aim of improving understanding of injury pathogenesis. We hypothesized that dorsal principal and shear strain patterns, magnitudes and directions would differ from proximal-to-distal; and would be similar from medial-to-lateral across each bone. Unilateral limbs from nine equine cadavers were instrumented with rosette strain gauges during limb loading to 10,500 N. Gauges were attached at seven dorsal sites: middle MC3, distal MC3 (medial, middle, lateral) and proximal P1 (medial, middle, lateral). Outcome measures were analysed with repeated measures analysis of variance. Distal MC3 had the greatest, and proximal P1 the smallest magnitude of minimum principal and shear strains. Directions of maximum and minimum principal strain were similar at the middle and distal MC3 sites with a 20-40° direction difference compared to proximal P1. The patterns of strain magnitude and direction were similar from medial-to-lateral on distal MC3 but varied in pattern and magnitude among the P1 sites. Overall, as load reached maximum, direction of minimum principal strain became more axial in orientation, converging from opposite directions between bones, potentially maximising stability of the distal limb. The difference in strain parameters and strain ratio for adjacent anatomic sites on distal MC3 and proximal P1 was not anticipated, in light of the anatomic congruity of the metacarpophalangeal joint. Based on the predominance of shear strain across proximal P1, shear forces are likely the predominant biomechanical contributor to sagittal fractures of P1.

In vitro assessment of the motion of equine proximal sesamoid bones relative to the third metacarpal bone under physiologic midstance loads.

OBJECTIVE: To assess the motion of the proximal sesamoid bones (PSBs) relative to the third metacarpal bone (MC3) of equine forelimbs during physiologic midstance loads. SAMPLE: 8 musculoskeletally normal forelimbs (7 right and 1 left) from 8 adult equine cadavers. PROCEDURES: Each forelimb was harvested at the mid-radius level and mounted in a material testing system so the hoof could be moved in a dorsal direction while the radius and MC3 remained vertical. The PSBs were instrumented with 2 linear variable differential transformers to record movement between the 2 bones. The limb was sequentially loaded at a displacement rate of 5 mm/s from 500 N to each of 4 loads (1.8 [standing], 3.6 [walking], 4.5 [trotting], and 10.5 [galloping] kN), held at the designated load for 30 seconds while lateromedial radiographs were obtained, and then unloaded back to 500 N. The position of the PSBs relative to the transverse ridge of the MC3 condyle and angle of the metacarpophalangeal (fetlock) joint were measured on each radiograph. RESULTS: The distal edge of the PSBs moved distal to the transverse ridge of the MC3 condyle at 10.5 kN (gallop) but not at lower loads. The palmar surfaces of the PSBs rotated away from each other during fetlock joint extension, and the amount of rotation increased with load. CONCLUSIONS AND CLINICAL RELEVANCE: At loads consistent with a high-speed gallop, PSB translations may create an articular incongruity and abnormal bone stress distribution that contribute to focal subchondral bone lesions and PSB fracture in racehorses.

Subchondral focal osteopenia associated with proximal sesamoid bone fracture in Thoroughbred racehorses.

BACKGROUND: Proximal sesamoid bone (PSB) fracture is the most common fatal injury in Thoroughbred (TB) racehorses in the United States. Epidemiological and pathological evidence indicates PSB fracture is likely the acute culmination of a chronic stress-related process. However, the aetiopathogenesis of PSB fracture is poorly understood. OBJECTIVE: To characterise bone abnormalities that precede PSB fracture. STUDY DESIGN: Two retrospective case-control groups of PSBs from TB racehorses with, and without, unilateral biaxial PSB fracture. METHODS: Proximal sesamoid bones were harvested post-mortem from TB racehorses subjected to euthanasia for unilateral biaxial PSB fracture (cases) or causes unrelated to PSB fracture (controls) while racing or training. The fractured medial PSB (FX-PSB) and contralateral intact medial PSB (CLI-PSB) from racehorses that sustained PSB fracture, and an intact medial PSB (CTRL-PSB) from racehorses that did not have a PSB fracture were collected as case and control specimens. Study 1 distributions of morphological features were compared among case and control groups using visual examination, photographs, radiographs and histology of whole PSBs and serial sagittal sections (10 FX-PSB, 10 CLI-PSB and 10 CTRL-PSB). Study 2 local bone volume fraction and mineral densities were compared among case and control PSBs using microcomputed tomography (9 FX-PSB, 9 CLI-PSB and 9 CTRL-PSB). RESULTS: A focal subchondral lesion characterised by colocalised focal discoloration, radiolucency, osteopenia, low tissue mineral density and a surrounding region of dense cancellous bone was identified in most case horses but not in controls. This subchondral lesion was found in a slightly abaxial mid-body location and was bilaterally present in most case horses. MAIN LIMITATIONS: The post-mortem samples may not represent the spectrum of abnormalities that occur throughout the development of the subchondral lesion. Lateral PSBs were not examined, so their contribution to biaxial PSB fracture pathogenesis is unknown. CONCLUSION: Abaxial subchondral lesions are consistent with pre-existing injury and likely associated with PSB fracture.

Characteristics of complete tibial fractures in California racehorses.

BACKGROUND: Tibial fractures cause ~3% of racehorse deaths. Pre-existing stress fractures have been associated with multiple racing and training fractures, but not complete tibial fractures. OBJECTIVES: To describe racehorse tibial fractures and compare signalment and exercise histories of affected and control racehorses. STUDY DESIGN: Retrospective analysis of necropsy reports. METHODS: Racehorses that had a complete tibial fracture (1990-2018) were retrospectively reviewed. Signalment and exercise histories of affected horses were compared to 1) racehorses that died because of non-tibial musculoskeletal injuries or 2) non-musculoskeletal cause and 3) age, sex, event-matched control racehorses. Tibial fracture prevalence was described relative to California racehorses that had at least one official work or race. Age, sex and limb distributions were compared between affected and control horses (Chi-square, Fisher's Exact test). Exercise history data were reduced to counts and rates of official high speed works, races and layups (periods without an official high speed work or race >60 days). Variables were compared among groups using matched logistic regression (P ≤ .05). RESULTS: Tibial fractures in 115 horses (97% unilateral; 50% left, 47% right) occurred most commonly during training (68%) and in 2- to 3-year-old horses (73%). Fractures were predominantly comminuted (93%), diaphyseal (44%) and oblique (40%). Of 61 cases examined for callus, 64% had periosteal callus associated with fracture, most commonly in proximal (65%) and distal diaphyseal (27%) locations. Of 28 racehorses with known exercise history, 57% never raced and 36% had a layup. Affected horses had fewer official-timed works and events (official high speed works and races), number of active days and accumulated less distance in events and works (P < .05) than control horses. MAIN LIMITATIONS: Retrospective review of necropsy reports by multiple pathologists over 28 years. CONCLUSIONS: Tibial fractures were associated with pre-existing stress fracture early in career. Most fractures were associated with proximolateral stress fractures.

Comparison of torsional properties between a Fixateur Externe du Service de Santé des Armées and an acrylic tie-in external skeletal fixator in a red-tailed hawk (Buteo jamaicensis) synthetic tibiotarsal bone model.

OBJECTIVE: To compare the torsional mechanical properties of 2 external skeletal fixators (ESFs) placed with 2 intramedullary pin (IP) and transfixation pin (TP) size combinations in a model of raptor tibiotarsal bone fracture. SAMPLE: 24 ESF-synthetic tibiotarsal bone model (polyoxymethylene) constructs. PROCEDURES: Synthetic bone models were fabricated with an 8-mm (simulated fracture) gap. Four types of ESF-synthetic bone model constructs (6/group) were tested: a FESSA with a 1.6-mm IP and 1.6-mm TPs, a FESSA with a 2.0-mm IP and 1.1-mm TPs, an acrylic connecting bar with a 1.6-mm IP and 1.6-mm TPs, and an acrylic connecting bar with a 2.0-mm IP and 1.1-mm TPs. Models were rotated in torsion (5°/s) to failure or the machine angle limit (80°). Mechanical variables at yield and at failure were determined from load deformation curves. Effects of overall construct type, connecting bar type, and IP and TP size combination on mechanical properties were assessed with mixed-model ANOVAs. RESULTS: Both FESSA constructs had significantly greater median stiffness and median torque at yield than both acrylic bar constructs; FESSA constructs with a 1.6-mm IP and 1.6-mm TPs had greatest stiffness of all tested constructs and lowest gap strain at yield. No FESSA constructs failed during testing; 7 of 12 acrylic bar constructs failed by fracture of the connecting bar at the interface with a TP. CONCLUSIONS AND CLINICAL RELEVANCE: Although acrylic bar ESFs have been successfully used in avian patients, the FESSA constructs in this study were mechanically superior to acrylic bar constructs, with greatest benefit resulting from use with the larger TP configuration.