RESUMEN
Nanotechnology could improve the effectiveness and functionality of pesticides, but the size effect of nanopesticides on formulation performance and the related mechanisms have yet to be explored, hindering the precise design and development of efficient and eco-friendly nanopesticides. In this study, two non-carrier-coated imidacloprid formulations (Nano-IMI and Micro-IMI) with identical composition but varying particle size characteristics were constructed to exclude other interferences in the size effect investigation. Nano-IMI and Micro-IMI both exhibited rod-like structures. Specifically, Nano-IMI had average vertical and horizontal axis sizes of 239.5 nm and 561.8 nm, while Micro-IMI exhibited 6.7 µm and 22.1 µm, respectively. Compared to Micro-IMI, the small size effect of Nano-IMI affected the arrangement of interfacial molecules, reduced surface tension and contact angle, thereby improving the stability, dispersibility, foliar wettability, deposition and retention of the nano-system. Nano-IMI exhibited 1.3 times higher toxicity to Aphis gossypii Glover compared to Micro-IMI, attributed to its enhanced foliar utilization efficiency. Importantly, the Nano-IMI did not intensify the toxicity to non-target organism Apis mellifera L. This study systematically elucidates the influence of size effect on key indicators related to the effectiveness and safety, providing a theoretical basis for efficient and safe application of nanopesticides and critical insights into sustainable agriculture and environmental development.
Asunto(s)
Imidazoles , Insecticidas , Nanopartículas , Neonicotinoides , Nitrocompuestos , Tamaño de la Partícula , Neonicotinoides/química , Nanopartículas/química , Nanopartículas/toxicidad , Imidazoles/toxicidad , Imidazoles/química , Insecticidas/toxicidad , Insecticidas/química , Animales , Hojas de la Planta/química , Hojas de la Planta/efectos de los fármacosRESUMEN
Repeated and widespread use of single chemical pesticides raises concerns about efficiency and safety, developing multi-component synergistic pesticides provides a new route for efficient control of diseases. Most commercial compound formulations are open systems with non-adjustable released rates, resulting in a high frequency of applications. Meanwhile, although nano pesticide delivery systems constructed with different carrier materials have been extensively studied, realizing their actual scale-up production still has important practical significance due to the large-scale field application. In this study, a boscalid and pyraclostrobin dual-loaded nano pesticide system (BPDN) was constructed with industrial-grade carrier materials to facilitate the realization of large-scale production. The optimal industrial-scale preparation mechanism of BPDN was studied with surfactants as key factors. When agricultural emulsifier No.600 and polycarboxylate are used as the ratio of 1:2 in the preparation process, the BPDN has a spherical structure with an average size of 270 nm and exhibits superior physical stability. Compared with commercial formulation, BPDN maintains rate-stabilized release up to 5 times longer, exhibits better dispersion and spreading performance on foliar, has more than 20% higher deposition amounts, and reduces loss. A single application of BPDN could efficiently control tomato gray mold during the growing period of tomatoes due to extended duration and combinatory effectiveness, reducing two application times and labor costs. Toxicology tests on various objects systematically demonstrated that BPDN has improved safety for HepG2 cells, and nontarget organism earthworms. This research provides insight into creating safe, efficient, and environmentally friendly pesticide production to reduce manual operation times and labor costs. Accompanied by production strategies that can be easily scaled up industrially, this contributes to the efficient use of resources for sustainable agriculture.
Asunto(s)
Plaguicidas , Estrobilurinas , Plaguicidas/química , Humanos , Portadores de Fármacos/química , Animales , Carbamatos/química , Tensoactivos/química , Nanopartículas/química , Tamaño de la Partícula , Solanum lycopersicum , Compuestos de Bifenilo , Niacinamida/análogos & derivadosRESUMEN
Solid nanodispersion (SND) is an important variety of nanopesticides which have been extensively studied in recent years. However, the key influencing factors for bioactivity enhancement of nanopesticides remain unclear, which not only limits the exploration of relevant mechanisms, but also hinders the precise design and development of nanopesticides. In this study, we explored the potential of SND in enhancing the bioactivity of nanopesticides, specifically focusing on abamectin SND prepared using a self-emulsifying-carrier solidifying technique combined with parameter optimization. Our formulation, consisting of 8% abamectin, 1% antioxidant BHT (2,6-di-tert-butyl-4-methylphenol), 12% complex surfactants, and 79% sodium benzoate, significantly increased the pseudo-solubility of abamectin by at least 3300 times and reduced its particle size to a mere 15 nm, much smaller than traditional emulsion in water (EW) and water-dispersible granule (WDG) forms. This reduction in particle size and increase in surface activity resulted in improved foliar adhesion and retention, enabling a more efficient application without the need for organic solvents. The inclusion of antioxidants also enhanced photostability compared to EW, and overall stability tests confirmed SND's resilience under various storage conditions. Bioactivity tests demonstrated a marked increase in toxicity against diamondback moths (Plutella xylostella L.) with abamectin SND, which exhibited 3.7 and 7.6 times greater efficacy compared to EW and WDG, respectively. These findings underscore the critical role of small particle size, high surface activity, and strong antioxidant properties in improving the performance and bioactivity of abamectin SND, highlighting its significance in the design and development of high-efficiency, eco-friendly nanopesticides and contributing valuably to sustainable agricultural practices.
Asunto(s)
Ivermectina , Ivermectina/análogos & derivados , Ivermectina/farmacología , Ivermectina/química , Animales , Insecticidas/farmacología , Insecticidas/química , Tamaño de la Partícula , Antioxidantes/farmacología , Antioxidantes/química , Nanopartículas/química , Mariposas Nocturnas/efectos de los fármacos , Tensoactivos/farmacología , Tensoactivos/química , Larva/efectos de los fármacos , EmulsionesRESUMEN
OBJECTIVE: The study aims to evaluate the accuracy of an MRI-based artificial intelligence (AI) segmentation cartilage model by comparing it to the natural tibial plateau cartilage. METHODS: This study included 33 patients (41 knees) with severe knee osteoarthritis scheduled to undergo total knee arthroplasty (TKA). All patients had a thin-section MRI before TKA. Our study is mainly divided into two parts: (i) In order to evaluate the MRI-based AI segmentation cartilage model's 2D accuracy, the natural tibial plateau was used as gold standard. The MRI-based AI segmentation cartilage model and the natural tibial plateau were represented in binary visualization (black and white) simulated photographed images by the application of Simulation Photography Technology. Both simulated photographed images were compared to evaluate the 2D Dice similarity coefficients (DSC). (ii) In order to evaluate the MRI-based AI segmentation cartilage model's 3D accuracy. Hand-crafted cartilage model based on knee CT was established. We used these hand-crafted CT-based knee cartilage model as gold standard to evaluate 2D and 3D consistency of between the MRI-based AI segmentation cartilage model and hand-crafted CT-based cartilage model. 3D registration technology was used for both models. Correlations between the MRI-based AI knee cartilage model and CT-based knee cartilage model were also assessed with the Pearson correlation coefficient. RESULTS: The AI segmentation cartilage model produced reasonably high two-dimensional DSC. The average 2D DSC between MRI-based AI cartilage model and the tibial plateau cartilage is 0.83. The average 2D DSC between the AI segmentation cartilage model and the CT-based cartilage model is 0.82. As for 3D consistency, the average 3D DSC between MRI-based AI cartilage model and CT-based cartilage model is 0.52. However, the quantification of cartilage segmentation with the AI and CT-based models showed excellent correlation (r = 0.725; P values < 0.05). CONCLUSION: Our study demonstrated that our MRI-based AI cartilage model can reliably extract morphologic features such as cartilage shape and defect location of the tibial plateau cartilage. This approach could potentially benefit clinical practices such as diagnosing osteoarthritis. However, in terms of cartilage thickness and three-dimensional accuracy, MRI-based AI cartilage model underestimate the actual cartilage volume. The previous AI verification methods may not be completely accurate and should be verified with natural cartilage images. Combining multiple verification methods will improve the accuracy of the AI model.
Asunto(s)
Cartílago Articular , Osteoartritis de la Rodilla , Humanos , Inteligencia Artificial , Cartílago Articular/anatomía & histología , Articulación de la Rodilla/anatomía & histología , Imagen por Resonancia Magnética/métodosRESUMEN
BACKGROUND: Positioning implant components and restoring patient anatomy during total hip arthroplasty (THA) are essential for joint stability, polyethylene liner wear, and range of motion. Previous studies comparing intraoperative fluoroscopy with no fluoroscopy during the posterior or posterolateral approach have reported conflicting results. This meta-analysis evaluated if intraoperative fluoroscopy improves component positioning and femoral component position compared to no fluoroscopy during posterior or posterolateral approach total hip arthroplasty. METHODS: The Preferred Reporting Items for Systematic Reviews and Meta-Analyses standards were followed when conducting the systematic review. We searched Web of Science, Embase, PubMed, Cochrane Controlled Trials Register, Cochrane Library, Highwire, CBM, CNKI, VIP, and Wanfang database in May 2023 to identify studies involving Intraoperative fluoroscopy versus no fluoroscopy during posterior or posterolateral approach total hip arthroplasty. Finally, we identified 1133 patients (1145 hips) assessed in seven studies. RESULTS: There were no significant differences in terms of acetabular cup inclination angle (ACIA, P = 0.43), ACIA within safe zone rate (P = 0.58), acetabular cup anteversion angle (ACAA, P = 0.46); ACAA within safe zone rate (P = 0.72), Combined safe zone rate (P = 0.28), dislocation rate (P = 0.64) and infection rate (P = 0.94) between two groups. Compared with the no fluoroscopy group, the intraoperative fluoroscopy group had more operation time (P < 0.00001), less femoral component offset difference (FCOD, P = 0.03), and less LLD (P < 0.00001). CONCLUSION: Even though intraoperative fluoroscopy was not related to an improvement in cup location or dislocation incidence. Our findings demonstrate that the restoration of leg lengths and femoral offset can be significantly improved by using intraoperative fluoroscopy to supplement good surgical skills in THA. The advantages of intraoperative fluoroscopy might become more apparent for surgeons with less experience. To ascertain whether intraoperative fluoroscopy for posterior or posterolateral approach total hip arthroplasty will have clinical benefits and improve the survival of prostheses, more well-powered and well-designed long-term follow-up studies were necessary.
Asunto(s)
Acetábulo , Artroplastia de Reemplazo de Cadera , Humanos , Fluoroscopía/métodos , Artroplastia de Reemplazo de Cadera/métodos , Acetábulo/cirugía , Acetábulo/diagnóstico por imagen , Prótesis de CaderaRESUMEN
Developing an environmentally friendly and safe nanodelivery system is crucial to improve the efficacy of pesticides and minimize environmental and health risks. However, preparing a completely water-based nanopesticide without using harmful solvents is a technical challenge. In this study, a water-based nanodelivery pesticide system was constructed to improve the efficacy and safety of Emamectin Benzoate (EB). A specific surfactant, 29-(4-(5-hydroxynonan-5-yl)phenoxy)-3,6,9,12,15,18,21,24,27-nonaoxanonacosan-1-ol (SurEB) was designed and synthesized to form a water-based nanodelivery system (EBWNS) with EB. Molecular dynamics simulations revealed the self-assembly and interaction forces between SurEB and EB in water, providing insights into the formation mechanism of EBWNS nanoparticles. The nanodelivery system showed the prolonged effectivity of EB with reduced degradation and demonstrated a good control efficacy for multiple target pests, such as red spider mite, beet armyworm larvae (Lepidoptera: Noctuidae), and rice stem borers (Chilo suppressalis). Toxicology tests on various objects demonstrated that the EBWNS has low toxicity for seeds, HaCaT cells, zebrafish, earthworm, and E. coli. This study provides a distinctive perspective for developing environmentally friendly nanopesticide formulations, which clarified a water-based treatment method for specific lipid-soluble pesticides. The water-based nanodelivery pesticide system has the potential to improve the efficacy and safety of pesticides in the process of field applications.
Asunto(s)
Plaguicidas , Animales , Agua , Escherichia coli , Pez CebraRESUMEN
BACKGROUND: The positioning of implant components for total hip arthroplasty (THA) is essential for joint stability, polyethylene liner wear, and range of motion. One potential benefit of the direct anterior approach (DAA) for THA is the ability to use intraoperative fluoroscopy for acetabular cup positioning and limb-length evaluation. Previous studies comparing intraoperative fluoroscopy with no fluoroscopy during DAA have reported conflicting results. This meta-analysis aimed to evaluate whether intraoperative fluoroscopy improves component positioning compared to no fluoroscopy during direct anterior total hip arthroplasty. METHODS: A systematic review following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines was conducted. We searched Web of Science, EMBASE, PubMed, Cochrane Controlled Trials Register, Cochrane Library, Highwire, CBM, CNKI, VIP, and Wanfang database in May 2023 to identify studies involving intraoperative fluoroscopy versus no fluoroscopy during direct anterior total hip arthroplasty. Finally, we identified 1262 hips assessed in seven studies. RESULTS: There were no significant differences in terms of acetabular cup inclination angle (ACIA, P = 0.21), ACIA within safe zone rate (P = 0.97), acetabular cup anteversion angle (ACAA, P = 0.26); ACAA within safe zone rate (P = 0.07), combined safe zone rate (P = 0.33), and limb-length discrepancy (LLD, P = 0.21) between two groups. CONCLUSION: Even though intraoperative fluoroscopy was not related to an improvement in cup location or LDD. With fewer experienced surgeons, the benefit of intraoperative fluoroscopy might become more evident. More adequately powered and well-designed long-term follow-up studies were required to determine whether the application of the intraoperative fluoroscopy for direct anterior total hip arthroplasty will have clinical benefits and improve the survival of prostheses.
Asunto(s)
Artroplastia de Reemplazo de Cadera , Prótesis de Cadera , Artroplastia de Reemplazo de Cadera/métodos , Articulación de la Cadera/cirugía , Estudios Retrospectivos , Acetábulo/diagnóstico por imagen , Acetábulo/cirugíaRESUMEN
This case-series outcome study presents a new arthroscopic technique for tibial eminence avulsion fracture (TEAF) with double-tunnel using two tightrope suture buttons. From May 2017 to July 2020, we performed a new arthroscopic technique for TEAF with double tunnels, using two tightrope suture buttons on 13 patients. Clinical assessments included anterior drawer, Lachman, and pivot shift tests, the International Knee Documentation Committee (IKDC), Lysholm knee scores, visual analog scale (VAS) scores, and range of motion (ROM). An independent observer noted conditions before surgery and during the last follow-up. The patients had an average follow-up of 26.2 months, ranging from 15 to 37 months. During the last postsurgical follow-up, the anterior drawer, Lachman, and pivot shift tests were negative in all the cases. According to the IKDC, Lysholm, and VAS final scores, all patients presented a significant knee function improvement at last follow-ups compared with preoperatively. The study shows that satisfactory results about an anatomic reduction of the fragment, knee stability, function, and strength can be achieved with the new arthroscopic technique for TEAF with double tunnels using two tightrope suture buttons. This study is a therapeutic case series and its level of evidence is IV.
Asunto(s)
Fracturas por Avulsión , Fracturas de la Tibia , Humanos , Fracturas por Avulsión/diagnóstico por imagen , Fracturas por Avulsión/cirugía , Fracturas de la Tibia/diagnóstico por imagen , Fracturas de la Tibia/cirugía , Artroscopía/métodos , Articulación de la Rodilla/cirugía , Técnicas de Sutura , Suturas , Resultado del TratamientoRESUMEN
The use of nanomaterials and nanotechnology to construct a smart pesticide delivery system with target-oriented and controlled-release functions is important to increase the effective utilization rate and minimize environmental residue pollution. A temperature-dependent delivery system can modulate the release of pesticide with temperature to improve the efficacy and precision targeting. A series of poly(N-isopropylacrylamide) (PNIPAM)-based nanogels with high deformability and tunable structure were successfully constructed for smart pesticide delivery and effective pest control. A lambda-cyhalothrin (LC)-loaded Pickering emulsion (LC@TNPE) with a stable gel-like network structure was further formed by the temperature-dependent nanogel to encapsule the pesticide. The foliar wettability, photostability, and controlled-release property of LC@TNPE were effectively enhanced compared to the commercial formulation because of the encapsulation and stabilization of nanogel. The release rate of LC positively correlated with temperature changes and thereby adapted to the trend of pest population increase at higher temperature. The LC@TNPE displayed improved control efficacy on multiple target pests including Plutella xylostella, Aphis gossypii, and Pieris rapae compared with the commercial suspension concentrate and microcapsule suspension, and it showed marked efficacy to control Pieris rapae for an extended duration even at a 40% reduced dosage. Furthermore, the safety was evaluated systematically on cells in vitro and with a nontarget organism. Studies confirmed that the system was relatively safe for HepG2 cells and aquatic organism zebrafish. This research provides an insight into creating an efficient and environmentally friendly pesticide nanoformulation for sustainable agriculture production.
Asunto(s)
Plaguicidas , Animales , Nanogeles , Temperatura , Preparaciones de Acción Retardada , Pez CebraRESUMEN
BACKGROUND: Morphological markers presenting the lateral extension of acromion and the greater tuberosity of humerus were proposed to diagnose and predict rotator cuff tears (RCTs) in recent years, but few studies have addressed the combined performance when using two predictors together. As a presence of a RCT may be associated with the impingement caused by both acromion and the greater tuberosity, we believe a combined utilization of predictors could result in a better diagnostic and predictive performance than using a single predictor. The aim of this study is to (i) explore whether the combination is more efficient to predict and diagnose RCTs; (ii) find out which combination is the most superior screening approach for RCTs. METHODS: This was a retrospective study and patients who visited our hospital and were diagnosed with or without partial-thickness or full-thickness RCTs via magnetic resonance imaging from January 2018 to April 2022 were enrolled and classified into two groups respectively. Four predictors, the critical shoulder angle (CSA), the acromion index (AI), the greater tuberosity angle (GTA) and the double-circle radius ratio (DRR) were picked to participate in the present study. Quantitative variables were compared by independent samples t tests and qualitative variables were compared by chi-square tests. Binary logistic regression analysis was used to construct discriminating combined models to further diagnose and predict RCTs. Receiver operating characteristic (ROC) curves were pictured to determine the overall diagnostic performance of the involved predictors and the combined models. RESULTS: One hundred and thirty-nine shoulders with RCTs and 57 shoulders without RCTs were included. The mean values of CSA (35.36 ± 4.57 versus 31.41 ± 4.09°, P < 0.001), AI (0.69 ± 0.08 versus 0.63 ± 0.08, P < 0.001), DRR (1.43 ± 0.10 versus 1.31 ± 0.08, P < 0.001) and GTA (70.15 ± 7.38 versus 64.75 ± 7.91°, P < 0.001) were significantly higher in the RCT group than for controls. Via ROC curves, we found the combined model always showed a better diagnostic performance than either of its contributors. Via logistic regression analysis, we found the values of both predictors over their cutoff values resulted in an increasement (20.169-161.214 folds) in the risk of having a RCT, which is more than that by using a single predictor only (2.815 -11.191 folds). CONCLUSION: The combined utilization of predictors is a better approach to diagnose and predict RCTs than using a single predictor, and CSA together with DRR present the strongest detectability for a presence of RCTs.
Asunto(s)
Lesiones del Manguito de los Rotadores , Articulación del Hombro , Humanos , Lesiones del Manguito de los Rotadores/diagnóstico por imagen , Lesiones del Manguito de los Rotadores/patología , Manguito de los Rotadores/patología , Articulación del Hombro/patología , Acromion , Hombro/patologíaRESUMEN
Safe and efficient pesticide formulations have attracted great attention for the prevention and control of diseases and pests. In recent years, improving the effectiveness and duration of pesticides through nanotechnology has become a research hotspot in the field of pesticide formulations. Here, we develop a novel hydrophilic lambda-cyhalothrin nanospheres encapsulated with poly(styrene-co-maleic anhydride) (PSMA) via the ultrasonic emulsification-solvent evaporation method, which exhibited better particle size uniformity and dispersion in comparison with the traditional method. The effects of PSMA content, oil phase/water phase ratio and phacoemulsification time on the particle size and morphology of nanoparticles were investigated to optimize preparation process parameters. Meanwhile, the wettability and adhesion behavior on the leaf surface, the release properties, and the storage stability of nanoparticles were characterized to evaluate the performance of the novel nano-formulation. This work not only establishes a facile and promising method for the applicable of insoluble pesticides, but also develops an innovative nano-formulation with hydrophilicity and high leaf adhesion, which opens a new direction in plant protection and residue reduction.
Asunto(s)
Nanosferas , Plaguicidas , Solventes , Ultrasonido , Plaguicidas/química , Interacciones Hidrofóbicas e HidrofílicasRESUMEN
Lipopolysaccharide (LPS) poses a considerable threat to food safety and human health. A colorimetric assay for LPS detection based on LPS binding aptamer (LBA) and SYBR Green I (SG) mediated aggregation of gold nanoparticles (AuNPs) was established. In the absence of LPS, the LBA was absorbed onto the AuNPs surface which prevented SG-induced aggregation of AuNPs, and the sensing system exhibited red color. When LPS was added, it interacted with the LBA, forming a complex. At higher LPS concentration, many LBAs were exhausted resulting in SG-induced aggregation of AuNPs, and color change from red to blue. The range of colorimetric detection of LPS was linear in 0-12 EU/mL, with a limit of detection of 0.1698 EU/mL. Spiked LPS in real samples and interfering substances were also identified. This assay ingeniously using the fluorescent dye SG as an effective trigger of AuNPs aggregation, is rapid and facile than most of those earlier reported LBA-based LPS assays, and there is potential to be modified to construct assays for other targets.
Asunto(s)
Aptámeros de Nucleótidos , Técnicas Biosensibles , Nanopartículas del Metal , Humanos , Oro/química , Colorimetría/métodos , Nanopartículas del Metal/química , Aptámeros de Nucleótidos/química , Lipopolisacáridos , Técnicas Biosensibles/métodosRESUMEN
Fungicide-resistant Fusarium has become a threaten to wheat production. Novel fungicide formulations can improve the efficacy of active ingredient and minimize the emergence of resistance. Encapsulation of fungicides in biodegradable carriers, especially, in polysaccharide, is a feasible approach to develop environment-friendly and efficient formulation. This study focused on the synthesis of ethyl cellulose-based phenamacril nano-delivery system by combining emulsion-solvent evaporation and high-pressure homogenization technology to improve the control of fusarium head blight in wheat. Emulsifier 125 and Tersperse 2500 were screened from eleven commonly used surfactants. Emulsifier 125 and Tersperse 2500 in a ratio of 2:1 and phenamacril nanocapsules with the mean particle size of 152.5 ± 1.3 nm were prepared. These showed excellent storage stability and wettability on crop leaves. A bioassay comparing the nanocapsules with a commercial preparation against Fusarium graminearum showed significantly improved biological activity. This formulation could be used to effectively not only to control fusarium head blight but also delay the occurrence of resistance.
Asunto(s)
Fungicidas Industriales , Fusarium , Nanocápsulas , Cianoacrilatos , Triticum , Enfermedades de las PlantasRESUMEN
Pesticides play an important role in pest control. However, they can be limited due to low utilization efficiency, causing substantial losses to the environment and ecological damage. Nanotechnology is an active area of research regarding encapsulation of pesticides for sustainable pest control. Here, we developed intelligent formulations of avermectin (Av) quaternary ammonium chitosan surfactant (QACS) nanocapsules (i.e., Av-Th@QACS) with on-demand controlled release properties, toward ambient temperature and maximal synergistic biological activity of Av and QACS. The Av-Th@QACS regulated the quantity of pesticide release in accordance with the ambient temperature changes and, insofar as this release is a means of responding to variations in pest populations, maximized the synergistic activity. In addition, the Av-Th@QACS were highly adhesive to crop leaves as a result of the prolonged retention time on the crop leaves. Therefore, Av-Th@QACS exhibited greater control against aphids at 35 °C than at 15 and 25 °C. Compared with commercial formulations, Av-Th@QACS was more toxic at 35 °C and less toxic at 15 °C. Thus, researchers can apply Av-Th@QACS as intelligent nanopesticides with an on-demand, controlled release and synergistic biological activity and, in so doing, prolong pesticide duration and improve the utilization efficiency.
Asunto(s)
Compuestos de Amonio , Quitosano , Nanocápsulas , Plaguicidas , Preparaciones de Acción Retardada/farmacología , Plaguicidas/farmacología , Compuestos de Amonio Cuaternario , TensoactivosRESUMEN
BACKGROUND: Emamectin benzoate (EMB), a frequently used biopesticide, is poorly soluble in water, making it difficult to wet the leaf surface, is prone to degrade in sunlight and readily loses its bioactivity. Traditional methods such as organic solvent application, pH adjustment and addition of photoprotectants either increase the economic and environmental costs or barely achieve the desired goal. We hypothesized that nanotechnology could improve the solubility, foliar affinity, photostability and bioactivity of EMB. This research set out to prepare a nano-EMB solid powder (nano-EMB-SP) and test this hypothesis. RESULTS: Nano-EMB-SP was prepared using a self-emulsifying method combined with carrier solidification. The mean particle size and Polydispersity index (PDI) of nano-EMB-SP were 14.64 nm and 0.24, respectively. A scanning electron microscopy image showed that EMB nanoparticles were mainly spherical or ellipsoidal in shape. Without organic solvent, the aqueous solubility of EMB in nano-EMB-SP was 4500 mg L-1 , at least 14-fold that of the EMB soluble granule (EMB-SG), which is solubilized by pH adjustment. Excellent foliar affinity of EMB was achieved by nano-EMB-SP, which completely wet and penetrated the superhydrophobic surface of cabbage (Brassica oleracea L.) leaf. Without photoprotectants, up to 82% of EMB content can be protected from ultraviolet (UV) damage in nano-EMB-SP. The combined effects of excellent photostability and foliar affinity of nano-EMB-SP led to the bioactivity of EMB being almost unchanged before and after UV radiation. CONCLUSION: Nano-EMB-SP is an eco-friendly and efficient way to improve the solubility, foliar affinity, photostability and bioactivity of EMB. This research provides a good approach to improving the efficacy of poorly soluble and UV-sensitive pesticides. © 2022 Society of Chemical Industry.
Asunto(s)
Ivermectina , Nanopartículas , Ivermectina/análogos & derivados , Ivermectina/química , Ivermectina/farmacología , Solubilidad , SolventesRESUMEN
OBJECTIVE: In this study we concerned on the morphological characteristics of the greater tuberosity of humerus and proposed the double-circle radius ratio as a new predictor for the diagnosis of rotator cuff tears. METHODS: This was a retrospective study and patients who visited our hospital and were diagnosed with or without rotator cuff tears via magnetic resonance imaging from January 2018 to July 2021 were enrolled and classified into two groups respectively. In a standard anteroposterior view, the radius of the best-fit circle of humeral head and the radius of the concentric circle passing through the most lateral edge of the greater tuberosity were measured in each shoulder. The ratio of these two radiuses was named as the double-circle radius ratio. Angular parameters including the greater tuberosity angle and the critical shoulder angle were also measured in the anteroposterior view. Independent samples t tests and chi-square tests were used to find significant differences between groups. Significant associations between those measured variables and demographic characteristics were analyzed with simple linear regression analysis. Receiver operating characteristic curves were pictured to determine applied cutoff values by using Youden index. Multivariable-adjusted analysis for the occurrence of rotator cuff tears was carried out by using multiple logistic regression analysis. For all tests a p value of <0.05 was considered statistically significant. RESULTS: One hundred and twelve shoulders with rotator cuff tears and 42 shoulders without rotator cuff tears were included. The mean value of the double-circle radius ratio was significantly larger in shoulders with rotator cuff tears (1.42 ± 0.09 vs. 1.30 ± 0.07, P = 0.000). With simple linear regression analysis, the radiuses of the humeral head and the greater tuberosity were significantly associated with heights and weights. In receiver operating characteristic curves, the largest area was found under the curve of the double-circle radius ratio as 0.846 (95% CI, 0.781-0.911; P = 0.000) with an applied cutoff value as 1.38 (sensitivity, 70.5%; specificity, 88.1%). Multivariable-adjusted analysis showed that a value of the double-circle radius ratio >1.38 resulted in 11.252-fold odds of developing rotator cuff tears (95% CI, 3.388-37.368; P = 0.000). CONCLUSION: The double-circle radius ratio is significantly larger in patients with rotator cuff tears and could be regarded as an eligible predictor for rotator cuff tears.
Asunto(s)
Lesiones del Manguito de los Rotadores , Humanos , Imagen por Resonancia Magnética , Radio (Anatomía) , Estudios Retrospectivos , Manguito de los Rotadores , Lesiones del Manguito de los Rotadores/diagnóstico por imagen , Hombro/patologíaRESUMEN
BACKGROUND: Despite Vast improvements in technology and surgical technique in total knee arthroplasty (TKA), approximately 15-25% TKAs, have suboptimal subjective clinical outcomes. Our study sought to evaluate if sensor-guided balancing improves postoperative clinical outcomes compared to a conventional gap balancing technique. METHODS: We searched Web of Science, Embase, PubMed, Cochrane Controlled Trials Register, Cochrane Library, Highwire, CBM, CNKI, VIP, and Wanfang database in March 2022 to identify studies involving sensor-guided balancing versus conventional gap balancing technique in TKA. Finally, we identified 2147 knees assessed in nine studies. RESULTS: Compared with manual gap balancing, Sensor-guided gap balancing resulted in less rate of Manipulation under anesthesia (MUA) (P = 0.02), however more rate of intraoperative additional procedures (P = 0.0003). There were no significant differences in terms of KSS (P = 0.21), KSS Function score (P = 0.36), OKS (P = 0.61), KOOS (P = 0.78), operative time (P = 0.17), Mechanical axis (P = 0.69) and rate of reoperation between two groups. CONCLUSION: Compared with conventional manual gap balancing techniques, sensors have more balancing procedures being performed. However, it did result in a reduction in the rate of MUA. More extensive, high-quality RCTs are required to verify our findings further.
Asunto(s)
Artroplastia de Reemplazo de Rodilla , Prótesis de la Rodilla , Osteoartritis de la Rodilla , Artroplastia de Reemplazo de Rodilla/métodos , Humanos , Articulación de la Rodilla/cirugía , Osteoartritis de la Rodilla/cirugía , Rango del Movimiento ArticularRESUMEN
Pesticide compounding technology for disease and pest control emerges as an effective way to increase the effectiveness of pesticides while reducing pesticides resistance. Nanomaterials and encapsulation technology have offered a new insight into preparing efficient pesticide formulations, especially constructing a co-delivery nanoparticle for synergistic pesticides. In this study, a dinotefuran/avermectin co-delivery nanoparticles (DACNPs) against pear tree pests with polylactic acid (PLA) as the wall material were constructed by double-emulsion method combined with high-pressure homogenization technique. The drug content of the DACNPs was 39.1% with an average size of 245.7 ± 4.2 nm and the mean polymer dispersity index (PDI) value was 0.123. The DACNPs showed high foliar retention and good spread performance on target leaves due to the nanoscale effect. The obtained DACNPs showed a better control effect on Grapholitha molesta Busck and Psylla chinensis Yang et Li compared with the commercial formulations, which could significantly prolong the effective duration and enhance the bioactivity with lower amounts and application frequency of pesticides. This study may provide new insights into developing novel pesticide formulations to improve the utilization rate of pesticides, reduce environmental pollution and minimize the cost of farming.
Asunto(s)
Nanopartículas , Plaguicidas , Pyrus , Guanidinas , Ivermectina/análogos & derivados , Neonicotinoides , Nitrocompuestos , Plaguicidas/farmacología , Poliésteres , ÁrbolesRESUMEN
In this study, pyraclostrobin nanocapsules were prepared by in situ polymerization with urea-formaldehyde resin as a wall material. The effects of different emulsifiers, emulsifier concentrations, and solvents on the physicochemical properties of pyraclostrobin nanocapsules were investigated. Solvesso™ 100 was selected as the solvent, and Emulsifier 600# was used as the emulsifier, which accounted for 5% of the aqueous phase system, to prepare pyraclostrobin nanocapsules with excellent physical and chemical properties. The particle size, ζ potential, and morphology of the nanocapsules were characterized by a particle size analyzer and transmission electron microscope. The nanocapsules were analyzed by Fourier-transform infrared spectroscopy, and the loading content and sustained release properties of the nanocapsules were measured. The results show that the size of the prepared nanocapsules was 261.87 nm, and the polydispersity index (PDI) was 0.12, presenting a uniform spherical appearance. The loading content of the pyraclostrobin nanocapsules was 14.3%, and their cumulative release rate was 70.99% at 250 h, providing better efficacy and sustainability compared with the pyraclostrobin commercial formulation.
RESUMEN
BACKGROUND: Pneumatic tourniquets are widely used in total knee arthroplasty (TKA). Some surgeons prefer a uniform tourniquet inflation pressure (UTIP) for all patients; others use personalized tourniquet inflation pressures (PTIP) based on systolic blood pressure and limb occlusion pressure. However, no consensus exists regarding the optimal mode of inflation pressure during TKA. This review aimed to appraise if personalized tourniquet inflation pressures are better than uniform tourniquet inflation. METHODS: The databases (Web of Science, Embase, PubMed, Cochrane Controlled Trials Register, Cochrane Library, Highwire, CBM, CNKI, VIP, Wanfang) were searched on March 2021 to systematically identify and screen the literature for randomized controlled trials involving PTIP and UTIP during total knee arthroplasty. RESULTS: Thirteen randomized controlled trials, involving 1204 TKAs (1201 patients) were included in the systematic review. The meta-analysis identified a trend toward less visual analogue scale (VAS) score at rest with PTIP group at 1 day (Pâ=â.002), 2 to 3 days (Pâ=â.01), and less VAS score at activity 1 day (Pâ<â.0001), 2 to 3âdays after the operation (Pâ<â.00001), and discharge (Pâ<â.0001). No significant difference was found between the groups in terms of VAS score at rest when discharge (Pâ=â1.0). We also found no significant difference in terms of intraoperative blood loss (Pâ=â.48), total blood loss (Pâ=â.15), lower limb vein thrombosis (Pâ=â.42), and thigh bullae (Pâ=â.17). However, in the PTIP group, we found a significant higher hospital for special surgery (HSS) score (Pâ=â.007), broader knee Range of motion (Pâ=â.02), less rate of thigh ecchymosis (Pâ=â.00001), and shorter thigh circumference at 1 day (Pâ=â.006), 2 to 3 days (Pâ=â.0005), and discharge (Pâ=â.02). CONCLUSION: PTIP provides a similar bloodless surgical field compared with the conventional UTIP. Furthermore, PTIP provides less pain intensity, thigh circumference, rate of thigh ecchymosis, higher hospital for special surgery, and better initial recovery of knee flexion in total knee arthroplasty. Therefore, we recommend using a PTIP method during TKA. More adequately powered and better-designed randomized controlled trials studies with long-term follow-up are required to produce evidence-based guidelines regarding the PTIP method.