Pickering emulsion with high freeze-thaw stability stabilized by xanthan gum/lysozyme nanoparticles and konjac glucomannan.

In this study, freeze-thaw cycle experiments were conducted on food-grade Pickering emulsions co-stabilized with konjac glucomannan (KGM) and xanthan gum/lysozyme nanoparticles (XG/Ly NPs). The rheological properties, particle size, flocculation degree (FD), coalescence degree (CD), centrifugal stability, Differential scanning calorimetry (DSC), X-ray diffraction (XRD) and microstructure of Pickering emulsion stabilized by KGM before and after freeze-thaw were characterized. It was found that as the concentration of KGM increased, the flocculation degree (FD) and coalescence degree (CD) of the emulsion decreased after the freeze-thaw cycle compared to the control sample, and the microscopic images showed that the droplets became smaller and less affected by the freeze-thaw cycles. The rheological and water-holding properties also confirmed that the KGM-added emulsions still had a strong gel network structure and prevented the separation of the continuous and dispersed phases of the droplets after freezing and thawing. Freeze-thaw treatments had a negative effect on the stable emulsion of XG/Ly NPs, while the addition of KGM improved the freeze-thaw stability of the emulsion, which provided a theoretical basis for the development of emulsion products with high freeze-thaw stability.

Construction of astaxanthin loaded Pickering emulsions gel stabilized by xanthan gum/lysozyme nanoparticles with konjac glucomannan from structure, protection and gastrointestinal digestion perspective.

Pickering emulsion gels have demonstrated their efficacy in delivering bioactive compounds by effectively preventing droplet aggregation, Ostwald maturation, and phase separation through gel network. Astaxanthin (AST) Pickering emulsion gels stabilized by xanthan gum/lysozyme nanoparticles (XG/Ly NPs) and konjac glucomannan (KGM) were studied from rheological tests and textural analysis. The Pickering emulsion gel demonstrated the highest water holding capacity (WHC) at concentration of 2 % XG/Ly NPs, 60 % oil phase fraction, and 0.5 % KGM concentration. The presence of KGM was observed to enhance the plasticity of Pickering emulsion gels, as evidenced by the dense gel network structure formed on the surface of the droplets. Furthermore, the utilization of Pickering emulsion gels containing AST has demonstrated enhanced photostability and a protective effect on AST, as evidenced by antioxidant experiments. Moreover, the incorporation of KGM in Pickering emulsion gels has been found to reduce the release of free fatty acids (FFA) and the bioaccessibility of AST, as indicated in vitro digestion results. Overall, these findings indicate the potential of KGM-based Pickering emulsion gels as effective vehicles for the delivery of hydrophobic bioactive compounds within the food industry.

[Percutaneous kyphoplasty assisted by three dimensional printing percutaneous guide plate for the treatment of osteoporotic vertebral compression fractures].

OBJECTIVE: To verify the safety of three dimensional printing percutaneous guide plate assisted percutaneous kyphoplasty(PKP) in the treatment of osteoporotic vertebral compression fractures(OVCFs). METHODS: The clinical data of 60 patients with OVCFs treated by PKP from November 2020 to August 2021 were retrospectively analyzed. There were 24 males and 36 females, aged from 72 to 86 years old with an average of (76.5±7.9) years. Routine percutaneous kyphoplasty was performed in 30 cases (conventional group) and three dimensional printing percutaneous guide plate assisted PKP was performed in 30 cases (guide plate group). Intraoperative pedicle puncture time (puncture needle to posterior vertebral body edge) and number of fluoroscopy, total operation time, total number of fluoroscopy, amount of bone cement injection, and complication (spinal canal leakage of bone cement) were observed. The visual analogue scale (VAS) and the anterior edge compression rate of the injured vertebra were compared before operation and 3 days after operation between two groups. RESULTS: All 60 patients were successfully operated without complication of spinal canal leakage of bone cement. In the guide plate group, the pedicle puncture time was(10.23±3.15) min and the number of fluoroscopy was(4.77±1.07) times, the total operation time was (33.83±4.21) min, the total number of fluoroscopy was(12.27±2.61) times;and in the conventional group, the pedicle puncture time was (22.83±3.09) min and the number of fluoroscopy was (10.93±1.62) times, the total operation time was(44.33±3.57) min, the total number of fluoroscopy was(19.20±2.67) times. There were statistically significant differences in the pedicle puncture time, intraoperative number of fluoroscopy, the total operation time, and the total number of fluoroscopy between the two groups(P<0.05). There was no significant difference in amount of bone cement injection between the two groups(P>0.05). There were no significant differences in VAS and the anterior edge compression rate of the injured vertebra at 3 days after operation between two groups(P>0.05). CONCLUSION: Three dimensional printing percutaneous guide plate assisted percutaneous kyphoplasty is safe and reliable, which can reduce the number of fluoroscopy, shorten the operation time, and decrease the radiation exposure of patients and medical staff, and conforms to the concept of precise orthopaedic management.

Insight into the interaction between tannin acid and bovine serum albumin from a spectroscopic and molecular docking perspective.

In this study, the interaction mechanism of bovine serum albumin (BSA) with tannic acid (TA) was investigated by spectroscopic and computational approaches and further validated using circular dichroism (CD), differential scanning calorimetry (DSC) and molecular docking techniques. The fluorescence spectra showed that TA bound to BSA and underwent static quenching at a single binding site, which was consistent with the molecular docking results. And the fluorescence quenching of BSA by TA was dose-dependent. Thermodynamic analysis indicated that hydrophobic forces dominated the interaction of BSA with TA. The results of circular dichroism showed that the secondary structure of BSA was slightly changed after coupling with TA. Differential scanning calorimetry showed that the interaction between BSA and TA improved the stability of the BSA-TA complex, and the melting temperature increased to 86.67 °C and the enthalpy increased to 264.1 J g-1 when the ratio of TA to BSA was 1.2 : 1. Molecular docking techniques revealed specific amino acid binding sites for the BSA-TA complex with a docking energy of -12.9 kcal mol-1, which means the TA is non-covalently bound to the BSA active site.

Pickering emulsions synergistic stabilized with konjac glucomannan and xanthan gum/lysozyme nanoparticles: Structure, protection and gastrointestinal digestion.

The effect of konjac glucomannan (KGM) on the stability and digestion characteristics of xanthan gum/lysozyme nanoparticles (XG/Ly NPs) stabilized Pickering emulsions was investigated. Results indicated that the high viscosity of KGM prompted the particles to be adsorbed toward the interface, which decreased the particle size and increased the stability of emulsions. As the concentration of KGM increased, the G' and G″ of emulsions became larger and approached a "solid-like" state. When the KGM concentration was ≥0.2 %, the large amplitude sweeps of the emulsion exhibited a "weak strain overshoot". The network structure formed by KGM molecular chain and particles was intertwined around the droplets to form a polysaccharide layer and fibrous network structure. Emulsions containing KGM showed a "spider web" epidermal network pattern. It was found by illumination for 4 h that samples with 0.2 % KGM concentration increased the retention of ß-carotene by 18.74 %. KGM decreased the release rate of fatty acids and bioaccessibility by hindering bile salt and lipase adsorption.

Reversibility of freeze-thaw/re-emulsification on Pickering emulsion stabilized with gliadin/sodium caseinate nanoparticles and konjac glucomannan.

The reversibility of freeze-thaw/re-emulsification of Pickering emulsion stabilized by gliadin/sodium caseinate nanoparticles (Gli/CAS NPs) was improved by adding konjac glucomannan (KGM). With the increase in the KGM concentration, the delamination of emulsions after freeze-thaw treatment was significantly improved. The microstructure showed that the presence of KGM helped to maintain the network structure of continuous phases. In particular, the particle size of the emulsion did not increase significantly after three freeze-thaw cycles when the KGM concentration was 0.6 % and the oil phase fraction was 60 %. The results of flocculation degree and coalescence degree also indicated that KGM promoted the cross-linking between particles on the surface of the droplet and increased the thickness of the interfacial film of the droplet. Rheological analysis also proved the same result: the elastic modulus of the emulsion was still larger than the viscous modulus, which showed the ideal freeze thaw reversibility. After adding KGM, the emulsion formed a strong network structure with good stability for long-term storage and reversibility for freeze-thaw cycling/re-emulsification. Thus, the emulsion has broad application prospects in food, cosmetics, and pharmaceutical fields.

Carrageenan-Based Pickering Emulsion Gels Stabilized by Xanthan Gum/Lysozyme Nanoparticle: Microstructure, Rheological, and Texture Perspective.

In this study, Pickering emulsion gels were prepared by the self-gel method based on kappa carrageenan (kC). The effects of particle stabilizers and polysaccharide concentrations on the microstructure, rheological characteristics, and texture of Pickering emulsion gels stabilized by xanthan gum/lysozyme nanoparticles (XG/Ly NPs) with kC were discussed. The viscoelasticity of Pickering emulsion gels increased significantly with the increase of kC and XG/Ly NPs. The results of temperature sweep showed that the gel formation mainly depended on the kC addition. The XG/Ly NPs addition could accelerate the formation of Pickering emulsion gels and increase its melting temperature (Tmelt), which is helpful to improve the thermal stability of emulsion gels. Cryo-scanning electron microscope (Cryo-SEM) images revealed that Pickering emulsion gel has a porous network structure, and the oil droplets were well wrapped in the pores. The hardness increased significantly with the increase of XG/Ly NPs and kC. In particular, the Pickering emulsion gel hardness was up to 2.9 Newton (N) when the concentration of kC and XG/Ly NPs were 2%. The results showed that self-gelling polysaccharides, such as kC, could construct and regulate the structure and characteristics of Pickering emulsion gel. This study provides theoretical support for potential new applications of emulsion gels as functional colloids and delivery systems in the food industry.

Characterization and antibacterial behavior of an edible konjac glucomannan/soluble black tea powder hybrid film with ultraviolet absorption.

In this study, a KGM/SBTP film was prepared by a blending method using KGM and a soluble black tea film (SBTP) as substrates, and its hygroscopicity, thermal properties, light barrier properties, microstructure, and bacteriostatic properties were evaluated. The results confirmed that compared with the control group, with the increase in the SBTP content, the transmittance of the film in the ultraviolet region significantly reduced, and the water barrier property and thermal stability were improved. Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) results indicated that the tea polyphenols interacted with the film substrate. SEM also showed that the structure of the KGM/SBTP films was smooth and flat, and all samples showed no fracture. In addition, the KGM/SBTP mixed membrane had obvious concentration-dependent antibacterial activity. When the concentration of SBTP was 0.9%, the inhibition zones against Staphylococcus aureus and Escherichia coli were 12.30 ± 0.20 mm and 12.05 ± 0.47 mm, respectively.

Physical regimes of electrostatic wave-wave nonlinear interactions generated by an electron beam propagating in a background plasma.

Electron-beam plasma interaction has long been a topic of great interest. Despite the success of the quasilinear and weak turbulence theories, their validities are limited by the requirements of a sufficiently dense mode spectrum and a small wave amplitude. In this paper, we extensively study the collective processes of a mono-energetic electron beam emitted from a thermionic cathode propagating through a cold plasma by performing high-resolution two-dimensional particle-in-cell simulations and using analytical theories. We confirm that, during the initial stage of two-stream instability between the beam and background cold electrons, it is saturated due to the well-known wave-trapping mechanism. Further evolution occurs due to strong wave-wave nonlinear processes. We show that the beam-plasma interaction can be classified into four different physical regimes in the parameter space for the plasma and beam parameters. The differences between the regimes are analyzed in detail. We identify a new regime in the strong Langmuir turbulence featured by what we call electron modulational instability (EMI) that could create a local Langmuir wave packet growing faster than the ion plasma frequency. Ions do not have time to respond to EMI in the initial growing stage. On a longer timescale, the action of the ponderomotive force produces very strong ion density perturbations, and eventually, the beam-plasma wave interaction stops being resonant due to the strong ion density perturbations. Consequently, in this EMI regime, electron beam-plasma interaction occurs in a repetitive (intermittent) process. The beam electrons are strongly scattered by waves, and the Langmuir wave spectrum is significantly broadened, which in turn gives rise to strong heating of bulk electrons. Associated energy transfer from the beam to the background plasma electrons has been studied. A resulting kappa (κ) distribution and a wave-energy spectrum E^{2}(k)∼k^{-5} are observed in the strong turbulent regime.

Electron Modulational Instability in the Strong Turbulent Regime for an Electron Beam Propagating in a Background Plasma.

We study collective processes for an electron beam propagating through a background plasma using simulations and analytical theory. A new regime where the instability of a Langmuir wave packet can grow locally much faster than ion frequency is clearly identified. The key feature of this new regime is an electron modulational instability that rapidly creates a local Langmuir wave packet, which in its turn produces local charge separation and strong ion density perturbations because of the action of the ponderomotive force, such that the beam-plasma wave interaction stops being resonant. Three evolution stages of the process and observed periodic burst features are discussed. Different physical regimes in the plasma and beam parameter space are demonstrated for the first time.

Antimicrobial behavior and mechanism of clove oil nanoemulsion.

Clove oil has many functions such as antibacterial, anti-inflammatory, anti-oxidation. In this experiment, a self-emulsification method was used to prepare clove oil nanoemulsion. And then filter paper diffusion method, minimum inhibitory concentration, and minimum bactericidal concentration were used to study the inhibitory behavior of clove oil nanoemulsion on Escherichia coli and Staphylococcus aureus. And explore the antibacterial mechanism by dynamically testing the content of nucleic acid and protein in the culture solution during the antibacterial process. The results show that when the surfactant content is 10 wt%, the hydrophile-lipophile balance (HLB) is 13.93, and the oil phase content is 2 wt%, a clove oil nanoemulsion with better dispersion and smaller average particle size can be prepared. The minimum inhibitory concentration (MIC) of clove oil nanoemulsion against Escherichia coli and Staphylococcus aureus is 0.5, 0.25 mg/mL, and the minimum bactericidal concentration (MBC) is 1, 2 mg/mL. The increase in protein content and the exponential growth of nucleic acid release also indicated that the clove oil nanoemulsion destroys the integrity of the cell membrane. The experimental results can provide a reference for the application of clove oil nanoemulsion in food, medicine and other fields.

Structural characterization and antibacterial properties of konjac glucomannan/soluble green tea powder blend films for food packaging.

Antimicrobial activity is a promising property for food packaging which could prolong the shelf life of food products. In this paper, the physicochemical and antimicrobial properties of konjac glucomannan (KGM)/soluble green tea powder (SGTP) edible films were firstly prepared and analyzed through light barrier properties, Fourier transform infrared spectroscopy (FT-IR), tensile strength (TS), X-ray diffraction (XRD), thermogravimetric analysis and scanning electron microscope (SEM). The results showed that appropriate addition of SGTP could improve the TS of composite films. With the increase of SGTP content, the transmittance of the films in the ultraviolet region decreased obviously, and the thermal stability was improved in a SGTP dependent manner. KGM/SGTP films present a fairly smooth and flat surface without any fracture when 0.5% SGTP was provided. The bacteriostatic test showed that the bacteriostatic performance of the composite films against Staphylococcus aureus and Escherichia coli was also significantly enhanced. When 1% SGTP was provided, the zones of inhibition for Escherichia coli and Staphyloccocus aureus reached to 13.45 ± 0.94 mm and 13.76 ± 0.92 mm, respectively. Overall, the KGM/SGTP films showed great potential as bioactive packaging materials to extend food shelf life.

High Internal-Phase Pickering Emulsions Stabilized by Xanthan Gum/Lysozyme Nanoparticles: Rheological and Microstructural Perspective.

Food-grade high internal-phase Pickering emulsions (HIPPEs) stabilized by solid or colloidal particles with different advantages have attracted extensive attention nowadays. However, looking for new appropriate particle stabilizers is the common practice for HIPPEs preparation. It is crucial to find a new strategy for the development of functional HIPPEs with controllable properties. In this study, a high concentration of xanthan gum/lysozyme nanoparticles (XG/Ly NPs) was used for the preparation of HIPPEs for the first time. Visual observations, creaming index (CI), microstructure, and rheology tests were carried out to investigate the potential of XG/Ly NPs as HIPPEs stabilizers. Results indicated that XG/Ly NPs could stabilize oil droplets in the concentration range of 0.5-4% (w/v). The HIPPEs with a minimal particle concentration of 1% exhibited remarkable physical stability. Rheological measurements showed that a high stability of solid-like HIPPEs was successfully obtained with a higher concentration of XG/Ly NPs. Overall, the HIPPEs stabilized by different concentrations of XG/Ly NPs exhibited excellent rheological and structural properties, which might provide a feasible strategy for the development of functional emulsion systems with controllable structures.

Identification of key mutations in central nervous diffuse large B-cell lymphoma (DLBCL) by comprehensive analysis between sequencing and TCGA database.

BACKGROUND: Diffuse large B-cell lymphoma (DLBCL) is the most common type of non-Hodgkin's lymphoma, and hence, a comprehensive understanding based on the gene expression profile is imperative. Although several studies have identified some critical mutant genes of DLBCL, the disease in the central nervous system has not been investigated clearly. This study is aimed to identify some novel and important mutant genes of DLBCL in central nervous system. METHODS: A total of 156 cases of central nervous tumors were collected from 2016 to 2018, in which the DLBCL cases were confirmed by H&E staining and immunohistochemistry. With the whole-genome high-throughput sequencing, the mutations of samples were identified. By matching with TCGA database, the common mutations of DLBCL were further confirmed. RESULTS: Twelve cases were designated as DLBCL, of which 1 case was classified into germinal center B cell (GCB) subtype, and 11 cases were non-GCB subtypes. The gene mutation spectrum demonstrated that the most common substitutions of six single bases were C>T/G>A, wherein the mutation frequency of C(C>T) G was the highest. The most common type of mutation is missense, and the most frequently mutated genes included MYD88, LRP1B, CD79B, GNA13 and PIM1. Based on the TCGA database, finally, the 4 significantly mutated genes (SMG), including MYD88, PIM1, CD79B, and BTG1 common in the above groups, were identified. CONCLUSIONS: Taken together, the analysis of the TCGA database and the results of the sequencing experiment displayed four mutations that might provide novel targets for the treatment of DLBCL.

Acupoint Injection for Nonspecific Chronic Low Back Pain: A Systematic Review and Meta-Analysis of Randomized Controlled Studies.

INTRODUCTION: Nonspecific chronic low back pain (NCLBP) became a public health and economic problem. Acupoint injection was used widely for patients with NCLBP. However, there were inconsistent results on the efficacy for these people. Therefore, this review was performed to systematically assess the efficacy and safety of acupoint injection. MATERIALS AND METHODS: The literature sources were collected via EMBASE, Medline, CENTRAL, CINAHL, CNKI, VIP, Wanfang, and Sino-Med Database from their inception to October 13, 2019. Endnote X7, widely used document management software, was used to manage and screen the literature sources. Each record was screened according to the predetermined inclusion criteria by two review authors independently. Quality assessment tool, "Risk of table," was used to assess the quality of the included studies according to the recommendation of the Cochrane Handbook for Systematic Reviews of Interventions. Data extraction was performed by one reviewer and verified by another reviewer. Any disagreement was addressed via consulting with a third reviewer in the abovementioned processes. All procedures were performed according to the Cochrane Handbook for Systematic Reviews of Interventions. RESULTS: This review included 13 studies involving 1381 patients with NCLBP. Quantitative analysis results indicated that there is no sufficient evidence that acupoint injection can improve the pain of patients with low back pain based on two trails: Visual Analogue Scale (VAS: MD = -1.33, 95% confidence interval (95% CI) -3.30 to 0.64, P=0.18, random-effect model). When assessing the effectiveness of acupoint injection therapy, the results indicated that acupoint injection can improve the effective rate for nonspecific chronic low back pain (OR = 3.64, 95% CI 2.4 to 5.21, P < 0.0001, fixed-effect model). CONCLUSION: There is insufficient evidence to indicate that acupoint injection therapy could improve the pain for patients with NCLBP. However, the level of evidence was downgraded to "very low quality" because of the poor methodological quality and clinical heterogeneity. The results should be interpreted with caution. Higher quality RCTs with more appropriate comparison, more objective outcome instruments, and adequate follow-up periods are necessary to assess the efficacy of acupoint injection for NCLBP. The PROSPERO Research registration identifying number is CRD42019119158.

The role of the sonic hedgehog signaling pathway in early brain injury after experimental subarachnoid hemorrhage in rats.

Previous studies have demonstrated that the sonic hedgehog (Shh) pathway plays a neuro-protective role. However, whether the Shh pathway is induced by subarachnoid hemorrhage (SAH) has not been investigated. We sought to investigate Shh activation in the cortex in the early stage of SAH, and assessed the effect of cyclopamine (a specific inhibitor of the Shh pathway) on Shh pathway regulation and evaluated the impact of cyclopamine on SAH. We found that the Shh pathway was up-regulated in the cortex after SAH, and that blocking the Shh pathway increased cell apoptosis. Early brain damages, including brain edema, blood-brain barrier impairment, and cortical apoptosis were significantly aggravated following with cyclopamine treatment compared with vehicle treatment. Our results suggest that the Shh pathway should be activated in the brain after SAH, and plays a beneficial role in SAH development, possibly by inhibiting cerebral oxidative stress through induction of antioxidant and detoxifying enzymes.