Highly Active Immobilized Catalyst for Ethylene Polymerization: Neutral Single Site Y(III) Complex Bearing Bulky Silylallyl Ligand.

Exploring the surface organometallic chemistry on silica of highly electrophilic yttrium complexes is a relatively uncommon endeavor, particularly when focusing on tris-alkyl complexes characterized by Y-C σ-alkyl bonds. A drawback with this class of complexes once grafted on silica, is the frequent occurrence of alkyl transfer by ring opening of siloxane groups, resulting in a mixture of species. Herein, we employed a more stable homoleptic yttrium allyl complex bearing bulky η3-1,3-bis(trimethylsilyl)allyl ligand to limit this transfer reaction. This strategy has been validated by comparing the reactivity between [Y{η3-1,3-C3H3(SiMe3)2}3] and [Y(o-CH2PhNMe2)3] with SiO2-700, where the undesired alkyl transfer reaction occurred for [Y(o-CH2PhNMe2)3] leading to a bipodal [(≡SiO)2Y(o-CH2PhNMe2)] as major surface species, 2, while [Y{η3-1,3-C3H3(SiMe3)2}3] resulted selectively in a monopodal species, [(≡SiO)Y{η3-1,3-C3H3(SiMe3)2}2], 1. The materials obtained were characterized by DRIFT, solid state NMR, mass balance analysis and EXAFS. Catalyst 1 showed high activity compared to 2 in ethylene polymerization. The catalytic performance of this neutral catalyst 1 was extended to pre-industrial scale in the presence of hydrogen and 1-hexene. An unprecedented activity, up to 7400 gPE·gcat-1·h-1 was obtained even with very low concentration of scavenger AliBu3 (TIBA/Y = 1.2). The obtained HDPE exhibited desired spherical particle morphology with broad molar mass distribution.

High-Field NMR, Reactivity, and DFT Modeling Reveal the γ-Al2 O3 Surface Hydroxyl Network.

Aluminas are strategic materials used in many major industrial processes, either as catalyst supports or as catalysts in their own right. The transition alumina γ-Al2 O3 is a privileged support, whose reactivity can be tuned by thermal activation. This study provides a qualitative and quantitative assessment of the hydroxyl groups present on the surface of γ-Al2 O3 at three different dehydroxylation temperatures. The principal [AlOH] configurations are identified and described in unprecedented detail at the molecular level. The structures were established by combining information from high-field 1 H and 27 Al solid-state NMR, IR spectroscopy and DFT calculations, as well as selective reactivity studies. Finally, the relationship between the hydroxyl structures and the molecular-level structures of the active sites in catalytic alkane metathesis is discussed.

High-Performance Porous Ionic Liquids for Low-Pressure CO2 Capture*.

Porous ionic liquids are non-volatile, versatile materials that associate porosity and fluidity. New porous ionic liquids, based on the ZIF-8 metal-organic framework and on phosphonium acetate or levulinate salts, were prepared and show an increased capacity to absorb carbon dioxide at low pressures. Porous suspensions based on phosphonium levulinate ionic liquid absorb reversibly 103 % more carbon dioxide per mass than pure ZIF-8 at 1 bar and 303 K. We show how the rational combination of MOFs with ionic liquids can greatly enhance low pressure CO2 absorption, paving the way towards a new generation of high-performance, readily available liquid materials for effective low pressure carbon capture.

Enhanced Metathesis Activity and Stability of Methyltrioxorhenium on a Mostly Amorphous Alumina: Role of the Local Grafting Environment.

Inorganic oxides play a crucial role in the activation of atomically dispersed metal oxides for catalytic olefin transformations, but the inefficient activation processes remain poorly understood. Activation of methyltrioxorhenium (MTO) for propene metathesis via its deposition on the surface of γ-Al2O3 typically results in <5% active sites, and these sites deactivate rapidly. Simple substitution of the support by a less crystalline (largely amorphous) alumina ( a-Al2O3) results in ca. 4× more activity and at least 10× more productivity. On both types of alumina, metathesis is initiated only at specific sites, whose availability limits the catalytic activity. While the two aluminas have similar total numbers of Lewis acid sites, the less crystalline support activates twice as many grafted MTO sites. Interestingly, a-Al2O3 has nearly double the number of strong Lewis acid sites. However, the number of active sites is ca. 10× lower than the total number of strong Lewis acid sites, and metathesis proceeds even when most are occupied by pyridine. DQSQ and D-HMQC 1H and 27Al solid-state NMR reveal that many Lewis acid sites are co-located with surface hydroxyl groups, which prevent activation and/or cause rapid deactivation. Undercoordinated Al sites on dominant (110) facets, which retain hydroxyl groups under catalyst preparation conditions, are therefore unlikely to lead to stable active sites. In contrast, the minor (100) facets of γ-Al2O3, which are completely dehydroxylated, contain strongly Lewis-acidic five-coordinate Al sites that are necessarily remote from surface hydroxyl groups. Such sites, which are relatively more abundant on less well-crystallized aluminas, are inferred to be responsible for generating stable metathesis sites.

Parahydrogen-Induced Polarization Study of the Silica-Supported Vanadium Oxo Organometallic Catalyst.

Parahydrogen can be used in catalytic hydrogenations to achieve substantial enhancement of NMR signals of the reaction products and in some cases of the reaction reagents as well. The corresponding nuclear spin hyperpolarization technique, known as parahydrogen-induced polarization (PHIP), has been applied to boost the sensitivity of NMR spectroscopy and magnetic resonance imaging by several orders of magnitude. The catalyst properties are of paramount importance for PHIP because the addition of parahydrogen to a substrate must be pairwise. This requirement significantly narrows down the range of the applicable catalysts. Herein, we study an efficient silica-supported vanadium oxo organometallic complex (VCAT) in hydrogenation and dehydrogenation reactions in terms of efficient PHIP production. This is the first example of group 5 catalyst used to produce PHIP. Hydrogenations of propene and propyne with parahydrogen over VCAT demonstrated production of hyperpolarized propane and propene, respectively. The achieved NMR signal enhancements were 200-300-fold in the case of propane and 1300-fold in the case of propene. Propane dehydrogenation in the presence of parahydrogen produced no hyperpolarized propane, but instead the hyperpolarized side-product 1-butene was detected. Test experiments of other group 5 (Ta) and group 4 (Zr) catalysts showed a much lower efficiency in PHIP as compared to that of VCAT. The results prove the general conclusion that vanadium-based catalysts and other group 4 and group 5 catalysts can be used to produce PHIP. The hydrogenation/dehydrogenation processes, however, are accompanied by side reactions leading, for example, to C4, C2, and C1 side products. Some of the side products like 1-butene and 2-butene were shown to appear hyperpolarized, demonstrating that the reaction mechanism includes pairwise parahydrogen addition in these cases as well.

Sodium Salicylate: An In-Depth Thermal and Photophysical Study.

Sodium salicylate (2-hydroxybenzoate) has been fully characterised by single-crystal X-ray diffraction (SCXRD), thermogravimetric analysis in combination with in operando FTIR spectroscopy and GC-MS, as well as by UV/Vis absorption and photoluminescence spectroscopy backed up by DFT calculations. SCXRD revealed a layered crystal structure composed of ionic sheets formed by Na+ -O contacts sandwiched between π-stacked aromatic rings of the salicylate anion oriented perpendicular to the layer plane. Only weak van der Waals interactions hold the individual sheets together. No solid/solid or solid/liquid phase transitions were observed upon heating, but a three-step decomposition was observed, with the first onset at 245 °C corresponding to concomitant release of CO2 and phenol. The UV/Vis absorption spectra show temperature-dependent absorption bands at around 305 and/or 345 nm, which according to DFT calculations correspond to the absorption of the carboxylate or phenolate proton transfer species, respectively. In solution, indications of the phenolate species are found only in a very apolar solvent (cyclohexane). Because of excited-state relaxation, emission always occurs from the phenolate structure, which explains the large Stokes shift.

Well-defined silica supported bipodal molybdenum oxo alkyl complexes: a model of the active sites of industrial olefin metathesis catalysts.

A well-defined, silica-supported molybdenum oxo alkyl species, ([triple bond, length as m-dash]SiO-)2Mo([double bond, length as m-dash]O)(CH2tBu)2, was prepared by the selective grafting of Mo([double bond, length as m-dash]O)(CH2tBu)3Cl onto a silica partially dehydroxylated at 200 °C using a rigorous surface organometallic chemistry approach. The immobilized bipodal surface species, partly resembling the active species of industrial MoO3/SiO2 olefin metathesis catalysts, exhibited excellent functional group tolerance in conjunction with its high activity in homocoupling, self and ring closing olefin metathesis.

Well-Defined Molybdenum Oxo Alkyl Complex Supported on Silica by Surface Organometallic Chemistry: A Highly Active Olefin Metathesis Precatalyst.

The well-defined silica-supported molybdenum oxo alkyl species (≡SiO-)MoO(CH2tBu)3 was selectively prepared by grafting of MoO(CH2tBu)3Cl onto partially dehydroxylated silica (silica700) using the surface organometallic chemistry approach. This surface species was fully characterized by elemental analysis and DRIFT, solid-state NMR, and EXAFS spectroscopy. This new material is related to the active species of industrial supported MoO3/SiO2 olefin metathesis catalysts. It displays very high activity in propene self-metathesis at mild (turnover number = 90 000 after 25 h). Remarkably, its catalytic performance outpaces those of the parent imido derivative and its tungsten oxo analogue.

A novel 2-step ALD route to ultra-thin MoS2 films on SiO2 through a surface organometallic intermediate.

The lack of scalable-methods for the growth of 2D MoS2 crystals, an identified emerging material with applications ranging from electronics to energy storage, is a current bottleneck against its large-scale deployment. We report here a two-step ALD route with new organometallic precursors, Mo(NMe2)4 and 1,2-ethanedithiol (HS(CH2)2SH) which consists in the layer-by-layer deposition of an amorphous surface Mo(iv) thiolate at 50 °C, followed by a subsequent annealing at higher temperature leading to ultra-thin MoS2 nanocrystals (∼20 nm-large) in the 1-2 monolayer range. In contrast to the usual high-temperature growth of 2D dichalcogenides, where nucleation is the key parameter to control both thickness and uniformity, our novel two-step ALD approach enables chemical control over these two parameters, the growth of 2D MoS2 crystals upon annealing being ensured by spatial confinement and facilitated by the formation of a buffer oxysulfide interlayer.

Solvent-Free Ring-Opening Metathesis Polymerization of Norbornene over Silica-Supported Tungsten-Oxo Perhydrocarbyl Catalysts.

Ring opening metathesis polymerization (ROMP) of bicyclo[2.2.1]hept-2-ene (norbornene) is carried out over silica-supported catalysts based on tungsten complexes bearing an oxo ligand (1: [(SiO)W(O)(CH2 SiMe3 )3 , 2: [(SiO)W(O)(CHCMe2 Ph)(dAdPO)], dAdPO  2,6 diadamantyl-4-methylphenoxide, 3: [(SiO)2 W(O)(CH2 SiMe3 )2 ]). The evaluation of the catalytic activities of the aforementioned materials in ROMP indicates that at low reaction time (0.5 min), the highest polymer yield is obtained with catalyst 2. However, for longer reaction time (>2 min), complex 3, a model of the industrial catalyst, exhibits a better monomer conversion. The polymers obtained are characterized. Moreover, these catalysts are shown to be rather preferentially selective to give the cis polynorbornene (>65%), characterized by high melting points (≈300 °C). The experimental values of the average molecular weight (Mn ) of polynorbornenes are found to be close to the theoretical ones for the polymers prepared using catalyst 2 and higher for those originated from catalyst 3.

Ligand Exchange-Mediated Activation and Stabilization of a Re-Based Olefin Metathesis Catalyst by Chlorinated Alumina.

Extensive chlorination of γ-Al2O3 results in the formation of highly Lewis acidic surface domains depleted in surface hydroxyl groups. Adsorption of methyltrioxorhenium (MTO) onto these chlorinated domains serves to activate it as a low temperature, heterogeneous olefin metathesis catalyst and confers both high activity and high stability. Characterization of the catalyst reveals that the immobilized MTO undergoes partial ligand exchange with the surface, whereby some Re sites acquire a chloride ligand from the modified alumina while donating an oxo ligand to the support. More specifically, Re LIII-edge EXAFS and DFT calculations support facile ligand exchange between MTO and Cl-Al2O3 to generate [CH3ReO2Cl+] fragments that interact with a bridging oxygen of the support via a Lewis acid-base interaction. According to IR and solid-state NMR, the methyl group remains intact, and does not evolve spontaneously to a stable methylene tautomer. Nevertheless, the chloride-promoted metathesis catalyst is far more active and productive than MTO/γ-Al2O3, easily achieving a TON of 100 000 for propene metathesis in a flow reactor at 10 °C (compared to TON < 5000 for the nonchlorinated catalyst). Increased activity is a consequence of both a larger fraction of active sites and a higher intrinsic activity for the new sites. Increased stability is tentatively attributed to a stronger interaction between MTO and chlorinated surface regions, as well as extensive depletion of the Brønsted acidic surface hydroxyl population. The reformulated catalyst represents a major advance for Re-based metathesis catalysts, whose widespread use has thus far been severely hampered by their instability.

The design of a bipodal bis(pentafluorophenoxy)aluminate supported on silica as an activator for ethylene polymerization using surface organometallic chemistry.

A new class of well-defined activating supports for olefin polymerization was obtained via the surface organometallic chemistry approach. High activities in slurry polymerization of ethylene along with industrial-grade physical properties of the resulting polyethylene were obtained when these activators were combined with metallocene complexes in the presence of triisobutylaluminium.

FAK and paxillin dynamics at focal adhesions in the protrusions of migrating cells.

Cell migration requires the fine spatiotemporal integration of many proteins that regulate the fundamental processes that drive cell movement. Focal adhesion (FA) dynamics is a continuous process involving coordination between FA and actin cytoskeleton, which is essential for cell migration. We studied the spatiotemporal relationship between the dynamics of focal adhesion kinase (FAK) and paxillin at FAs in the protrusion of living endothelial cells. Concurrent dual-color imaging showed that FAK was assembled at FA first, which was followed by paxillin recruitment to the FA. By tracking and quantifying FAK and paxillin in migrating cells, the normalized FAK/Paxillin fluorescence intensity (FI) ratio is > 1 (≈ 4 fold) at cell front, ≈ 1 at cell center, and < 1 at cell rear. The significantly higher FAK FI than paxillin FI at cell front indicates that the assembly of FAK-FAs occurs ahead of paxillin at cell front. To determine the time difference between the assemblies of FAK and paxillin at nascent FAs, FAs containing both FAK and paxillin were quantified by image analysis and time correlation. The results show that FAK assembles at the nascent FAs earlier than paxillin in the protrusions at cell front.

Heteronuclear NMR spectroscopy as a surface-selective technique: a unique look at the hydroxyl groups of γ-alumina.

The surface hydroxyl groups of γ-alumina dehydroxylated at 500 °C were studied by a combination of one- and two-dimensional homo- and heteronuclear (1)H and (27)Al NMR spectroscopy at high magnetic field. In particular, by harnessing (1)H-(27) Al dipolar interactions, a high selectivity was achieved in unveiling the topology of the alumina surface. The terminal versus bridging character of the hydroxyl groups observed in the (1)H magic-angle spinning (MAS) NMR spectrum was demonstrated thanks to (1)H-(27) Al RESPDOR (resonance-echo saturation-pulse double-resonance). In a further step the hydroxyl groups were assigned to their aluminium neighbours thanks to a {(1)H}-(27) Al dipolar heteronuclear multiple quantum correlation (D-HMQC), which was used to establish a first coordination map. Then, in combination with (1)H-(1) H double quantum (DQ) MAS, these elements helped to reveal intimate structural features of the surface hydroxyls. Finally, the nature of a peculiar reactive hydroxyl group was demonstrated following this methodology in the case of CO2 reactivity with alumina.

Bicuspid aortic valves experience increased strain as compared to tricuspid aortic valves.

OBJECTIVE: To determine whether the leaflets of bicuspid aortic valve (BAV) experience increased strain when compared to tricuspid aortic valve (TAV) leaflets. BACKGROUND: The population at highest risk of aortic valve calcification (AVC) are individuals with BAVs. Currently, efforts to medically treat AVC are hampered by a limited understanding of the biomechanical forces involved in the molecular pathogenesis of AVC. METHODS: Surgically created BAVs and control TAVs were placed into a left heart simulator. Strains were calculated by comparing the distances between points on the aortic valve (AoV) leaflet during various time points during a simulated cardiac cycle. RESULTS: The fused leaflets of BAVs experience significantly more strain during systole when compared to TAVs. Specifically, BAVs experience 24% strain (P < .0001) in the radial direction, parallel to the direction of blood flow, as compared to TAVs. There was peak difference of 4% (P < .001) in the circumferential direction. DISCUSSION: Based upon the data presented here, we are in the process of identifying how increased strain activates calcification-associated pathways in AoV cells. Future studies will examine whether these stretch responsive pathways can be blocked to inhibit calcification of BAVs.

Thermal decomposition of lignocellulosic biomass in the presence of acid catalysts.

Transformation of lignocellulosic biomass to biofuels involves multiple processes, in which thermal decomposition, hydrotreatment are the most central steps. Current work focuses on the impact of several solid acids and Keggin-type heteropolyacids on the decomposition temperature (Td) of pine wood and the characterization of the resulted products. It has been observed that a mechanical mixture of solid acids with pine wood has no influence on Td, while the use of heteropolyacids lower the Td by 100°C. Moreover, the treatment of biomass with a catalytic amount of H3PW12O40 leads to formation of three fractions: solid, liquid and gas, which have been investigated by elemental analysis, TGA, FTIR, GC-MS and NMR. The use of heteropolyacid leads, at 300°C, to a selective transformation of more than 50 wt.% of the holocellulose part of the lignocellulosic biomass. Moreover, 60 wt.% of the catalyst H3PW12O40 are recovered.

Azaphosphatranes as structurally tunable organocatalysts for carbonate synthesis from CO2 and epoxides.

Three azaphosphatranes were used as organocatalysts for the synthesis of cyclic carbonates from CO2 and epoxides. They proved to be efficient single-component, metal-free catalysts for the reaction of simple or activated epoxides (styrene oxide, epichlorohydrin, glycidyl methyl ether) with CO2 under mild reaction conditions, displaying high stability and productivity over several days of reaction. Substitution patterns on the catalyst were shown to affect activity and stability. Kinetic analysis allowed investigation of the reaction mechanism.

Small changes have consequences: lessons from tetrabenzyltitanium and -zirconium surface organometallic chemistry.

Homoleptic benzyl derivatives of titanium and zirconium have been grafted onto silica that was dehydroxylated at 200 and 700 °C, thereby affording bi-grafted and mono-grafted single-site species, respectively, as shown by a combination of experimental techniques (IR, MAS NMR, EXAFS, and elemental analysis) and theoretical calculations. Marked differences between these compounds and their neopentyl analogues are discussed and rationalized by using DFT. These differences were assigned to the selectivity of the grafting process, which, depending on the structure of the molecular precursors, led to different outcomes in terms of the mono- versus bi-grafted species for the same surface concentration of silanol species. The benzylzirconium derivatives were active towards ethylene polymerization in the absence of an activator and the bi-grafted species displayed higher activity than their mono-grafted analogues. In contrast, the benzyltitanium and neopentylzirconium counterparts were not active under similar reaction conditions.

Nickel-silicide colloid prepared under mild conditions as a versatile Ni precursor for more efficient CO2 reforming of CH4 catalysts.

Preparing highly active and stable non-noble-metal-based dry reforming catalysts remains a challenge today. In this context, supported nickel nanoparticles with sizes of 1.3 ± 0.2 and 2.1 ± 0.2 nm were synthesized on silica and ceria, respectively, via a two-step colloidal approach. First, 2-nm nickel-silicide colloids were synthesized from Ni(COD)(2) and octylsilane at low temperature; they were subsequently dispersed onto supports prior to reduction under H(2). The resulting catalysts display high activity in dry reforming compared to their analogues prepared using conventional approaches, ceria providing greatly improved catalyst stability.

17O NMR gives unprecedented insights into the structure of supported catalysts and their interaction with the silica carrier.

Flame silica was surface-labeled with (17)O, through isotopic enrichment of both siloxanes and silanols. After heat treatment at 200 and 700 °C under vacuum, the resulting partially dehydroxylated silica materials were investigated by high-field solid-state (1)H and (17)O NMR. More specifically, MQ MAS and HMQC sequences were used to probe the (17)O local environment. In a further step, these (17)O-tagged supports were used for the preparation of supported catalysts by reaction with perhydrocarbyl transition metal derivatives (zirconium tetraalkyl, tantalum trisalkyl-alkylidene, and tungsten trisalkyl-alkylidyne complexes). Detailed (17)O 1D and 2D MQ and HMQC MAS NMR studies demonstrate that signals in the Si-OH, Si-O-Si, and Si-O-metal regions are highly sensitive to local structural modifications, thanks to (17)O wide chemical shift and quadrupolar constant ranges. Experimental results were supported by DFT calculations. From the selective surface labeling, unprecedented information on interactions between supported catalysts and their inorganic carrier has been extracted.