Effects of experimental in-office bleaching gels incorporated with co-doped titanium dioxide nanoparticles on dental enamel physical properties.

To evaluate the physical properties of enamel submitted to hydrogen peroxide (HP) incorporated with titanium dioxide nanoparticles (NP) co-doped with nitrogen and fluorine and irradiated with violet LED light (LT). Enamel-dentin disks were randomly allocated (T0) into groups, according to HP (HP6, HP15, or HP35) and NP (no NP, 5NP, or 10NP) concentrations, and irradiated or not with LT. A negative control (NC) group was set. After three bleaching sessions (T1, T2, and T3), specimens were stored in saliva for 14 days (T4). Enamel surface microhardness number (KHN), surface roughness (Ra), cross-sectional microhardness (ΔS), energy-dispersive spectroscopy (EDS), scanning electron (SEM), and polarized light (PLM) microscopies were performed. Surface KHN was significantly influenced by NP over time, independently of LT irradiation. At T3 and T4, gels with 5NP and 10NP exhibited no KHN differences compared to NC and baseline values, which were not observed under the absence of NP. NP incorporation did not statistically interfere with the ΔS and Ra. PLM images exhibited surface/subsurface darkening areas suggestive of demineralizing regions. SEM demonstrated some intraprismatic affection in the groups without NP. EDS reported a higher enamel calcium to phosphorus ratio following 10NP gels applications. Gels with NP maintained the enamel surface microhardness levels and seemed to control surface morphology, upholding the mineral content. None of the proposed experimental protocols have negatively influenced the enamel surface roughness and the cross-sectional microhardness.

Determination of the pubertal growth spurt by artificial intelligence analysis of cervical vertebrae maturation in lateral cephalometric radiographs.

OBJECTIVE: This study aimed to assess the performance of a convolutional neural network (CNN) model in detecting the pubertal growth spurt by analyzing cervical vertebrae maturation (CVM) in lateral cephalometric radiographs (LCRs). STUDY DESIGN: In total, 600 LCRs of patients from 6 to 17 years old were selected. Three radiologists independently and blindly classified the maturation stages of the LCRs and defined the difficulty of each classification. Subsequently, the stage and level of difficulty were determined by consensus. LCRs were distributed between training, validation, and test datasets across 4 CNN-based models. The models' responses were compared with the radiologists' reference standard, and the architecture with the highest success rate was selected for evaluation. Models were developed using full and cropped LCRs with original and simplified maturation classifications. RESULTS: In the simplified classification, the Inception-v3 CNN yielded an accuracy of 74% and 75%, with recall and precision values of 61% and 62%, for full and cropped LCRs, respectively. It achieved 61% and 62% total success rates with full and cropped LCRs, respectively, reaching 72.7% for easy-to-classify cropped cases. CONCLUSION: Overall, the CNN model demonstrated potential for determining the maturation status regarding the pubertal growth spurt through images of the cervical vertebrae. It may be useful as an initial assessment tool or as an aid for optimizing the assessment and treatment decisions of the clinician.

Full virtual patient generated by artificial intelligence-driven integrated segmentation of craniomaxillofacial structures from CBCT images.

OBJECTIVES: To assess the performance, time-efficiency, and consistency of a convolutional neural network (CNN) based automated approach for integrated segmentation of craniomaxillofacial structures compared with semi-automated method for creating a virtual patient using cone beam computed tomography (CBCT) scans. METHODS: Thirty CBCT scans were selected. Six craniomaxillofacial structures, encompassing the maxillofacial complex bones, maxillary sinus, dentition, mandible, mandibular canal, and pharyngeal airway space, were segmented on these scans using semi-automated and composite of previously validated CNN-based automated segmentation techniques for individual structures. A qualitative assessment of the automated segmentation revealed the need for minor refinements, which were manually corrected. These refined segmentations served as a reference for comparing semi-automated and automated integrated segmentations. RESULTS: The majority of minor adjustments with the automated approach involved under-segmentation of sinus mucosal thickening and regions with reduced bone thickness within the maxillofacial complex. The automated and the semi-automated approaches required an average time of 1.1 min and 48.4 min, respectively. The automated method demonstrated a greater degree of similarity (99.6 %) to the reference than the semi-automated approach (88.3 %). The standard deviation values for all metrics with the automated approach were low, indicating a high consistency. CONCLUSIONS: The CNN-driven integrated segmentation approach proved to be accurate, time-efficient, and consistent for creating a CBCT-derived virtual patient through simultaneous segmentation of craniomaxillofacial structures. CLINICAL RELEVANCE: The creation of a virtual orofacial patient using an automated approach could potentially transform personalized digital workflows. This advancement could be particularly beneficial for treatment planning in a variety of dental and maxillofacial specialties.

Comparison between the ion-specific electrode and SPADNS methods for analysis of fluoride concentration in the water supply

The maintenance of adequate fluoride (F) concentration in the public water supply is fundamental for ensuring that the community use of F can reach the maximum benefit for caries control and minimum risk for dental fluorosis. Thus, surveillance systems must use accurate and valid analytical methods to determine F concentration and, according to the literature, give preference to the ion-specific electrode (F- ISE) analysis. Aim: The objective of this study was to compare the accuracy of the ISE and SPADNS methods in the determination of the F concentration in the same water sample. Methods: Duplicate water samples were taken from 30 sampling sites in the municipality of Maringá, state of Paraná, monthly for 12 months, totaling 276 samples. An aliquot was analyzed by the FOP-UNICAMP Oral Biochemistry laboratory, using the F- ISE method, and the other one, by the SANEPAR laboratory in Maringá/PR, using the SPADNS method. Descriptive analysis and Pearson's correlation test were applied, with a significant level of p<0.05. Results: Results were expressed as ppm F (mg F/L), and a very strong positive correlation (r= 0.91; p<0.001) was detected between the two methods of analysis. Conclusion: Our findings suggest that the determination of f luoride concentration in water can be made with accuracy by the SPADNS method, a standardized analysis protocol

Evaluation of experimental resin infiltrant containing nanohydroxyapatite on color stability and microhardness in demineralized enamel.

OBJECTIVE: The aim of the study was to evaluate the effect of the addition of 10% nanohydroxyapatite in an experimental resin infiltrant on color stability and mineral loss. MATERIAL AND METHODS: Bovine enamel blocks were randomized into five groups (n = 27/group): SE (sound enamel); ICL (initial caries lesion); I (Icon®); E (experimental infiltrant); EH (experimental infiltrant containing 10% nanohydroxyapatite). Color evaluation (n = 15) was performed and CIEL*a*b* values were obtained at points T0 (baseline), T1 (14 days immersed on coffee solution), and T2 (28 days immersed) and data were calculated ∆E00, ∆WID, ∆L*, ∆a*, and ∆b*. Cross-sectional microhardness (n = 12) was performed and lesion area (∆S) was calculated. Images were obtained with polarized light optical microscopy at 40 × magnification (n = 5). RESULTS: In color stability results, there was significant difference between time (14 and 28 days); ICL demonstrated significant difference among treated groups in all measures (∆L*, ∆a*, ∆b*, ∆E00, ∆WID) regardless of time; I and E demonstrated similar behavior on those measures and EH differed from I in ∆L*. For ∆S, ICL group showed a significant difference compared to I and EH groups, but did not differ from E. CONCLUSION: The nanohydroxyapatite incorporation suggested an effective mineral recovery on initial caries lesion in depth; however, it showed high color variation, such as Icon. In terms of ∆S, I and EH had lower mineral loss, suggesting a reinforcement on initial caries lesion. CLINICAL RELEVANCE: Commercial and experimental infiltrants containing nanohydroxyapatite present low color stability and might reinforce mineral in initial caries lesion.

Optimization of a Validated Protocol That Determines Bioavailable Fluoride in Toothpastes.

A validated protocol used to determine how much of total fluoride is bioavailable in toothpaste formulations was evaluated if it could be simplified regarding the following parameters: (1) concentration of the slurry (0.25-4%), (2) centrifugation speed (1,000-12,000 g) and time (1-10 min), and (3) incubation time for FPO32- ion hydrolysis and insoluble-F dissolution (15-60 min). Fresh and aged Na2FPO3/CaCO3 and fresh NaF/SiO2-based toothpastes were analyzed (n = 9). The improvements were the centrifugation at 1,000 g for 5 min is enough to separate insoluble-F and the time for FPO32- ion hydrolysis and insoluble-F dissolution can be shortened to 30 min.

Anticaries potential of a fluoride foam.

Foam has been used worldwide as a vehicle for the professional application of fluoride and hypothetically should have the same anticaries potential as conventional fluoride gel (F-gel) in terms of the formation of reaction products with enamel. Thus, the ability of Flúor Care® foam (FGM, Joinville, SC, Brazil, 12,300 ppm F, acidulated) to react with enamel was evaluated in comparison with Flúor gel® (DFL, Rio de Janeiro, RJ, Brazil, 12,300 ppm F, acidulated). Slabs (n=10/group) of sound enamel and with caries lesion were used, in which the concentrations of total fluoride (TF), and loosely (CaF2-like) and firmly (FAp) bound types were determined. The importance of agitation during application was previously tested. The determinations were made with fluoride ion-specific electrode and the results were expressed in µg F/cm² of the treated enamel area. ANOVA and Tukey tests were used to analyze the difference among treatments, independently for sound and carious enamel. The agitation of the products during application significantly increased the reactivity of the foam (p<0.05), but not that of the gel (p>0.05). The foam did not differ from F-gel (p>0.05) concerning the formation of TF and CaF2-like in sound or carious enamel. Regarding FAp, the foam did not differ from F-gel (p>0.05) in the carious enamel, but the concentration in the sound was lower (p<0.05). The results show that this commercial fluoride foam tested needs to be agitated during application to improve its reactivity with enamel, which raises a question about other brands.

Anticaries potential of a fluoride foam

Abstract Foam has been used worldwide as a vehicle for the professional application of fluoride and hypothetically should have the same anticaries potential as conventional fluoride gel (F-gel) in terms of the formation of reaction products with enamel. Thus, the ability of Flúor Care® foam (FGM, Joinville, SC, Brazil, 12,300 ppm F, acidulated) to react with enamel was evaluated in comparison with Flúor gel® (DFL, Rio de Janeiro, RJ, Brazil, 12,300 ppm F, acidulated). Slabs (n=10/group) of sound enamel and with caries lesion were used, in which the concentrations of total fluoride (TF), and loosely (CaF2-like) and firmly (FAp) bound types were determined. The importance of agitation during application was previously tested. The determinations were made with fluoride ion-specific electrode and the results were expressed in μg F/cm² of the treated enamel area. ANOVA and Tukey tests were used to analyze the difference among treatments, independently for sound and carious enamel. The agitation of the products during application significantly increased the reactivity of the foam (p<0.05), but not that of the gel (p>0.05). The foam did not differ from F-gel (p>0.05) concerning the formation of TF and CaF2-like in sound or carious enamel. Regarding FAp, the foam did not differ from F-gel (p>0.05) in the carious enamel, but the concentration in the sound was lower (p<0.05). The results show that this commercial fluoride foam tested needs to be agitated during application to improve its reactivity with enamel, which raises a question about other brands.

Resumo A espuma tem sido utilizada mundialmente como veículo para aplicação profissional de fluoreto e hipoteticamente deveria ter o mesmo potencial anticárie que o gel fluoretado convencional (F-gel) em termos de formação de produtos de reação com o esmalte. Assim, a capacidade da espuma Flúor Care® (FGM, Joinville, SC, Brasil, 12.300 ppm F, acidulada) de reagir com o esmalte foi avaliada em comparação com o Flúor gel® (DFL, Rio de Janeiro, RJ, Brasil 12.300 ppm F, acidulado). Foram utilizados blocos (n=10/grupo) de esmalte hígido e com lesão de cárie, nos quais foram determinadas as concentrações de flúor total (FT), e os tipos de flúor fracamente (tipo-CaF2) e firmemente (FAp) ligados ao esmalte. A importância da agitação durante a aplicação foi previamente testada. As determinações foram feitas com eletrodo íon específico para fluoreto e os resultados foram expressos em μg F/cm² da área tratada do esmalte. A diferença entre os tratamentos foi analisada por ANOVA e Tukey (α=5%), independentemente para esmalte hígido e cariado. A agitação dos produtos durante a aplicação aumentou significativamente a reatividade da espuma (p<0,05), mas não a do gel (p>0,05). A espuma não diferiu do F-gel (p>0,05) quanto à formação de FT e tipo-CaF2 no esmalte hígido ou cariado. Em relação à FAp, a espuma não diferiu do F-gel (p>0,05) no esmalte cariado, mas a concentração no hígido foi menor (p<0,05). Os resultados mostram que esta espuma fluoretada comercial testada precisa ser agitada durante a aplicação para melhorar sua reatividade com o esmalte, o que levanta questão sobre outras marcas.

Three-dimensional maxillary virtual patient creation by convolutional neural network-based segmentation on cone-beam computed tomography images.

OBJECTIVE: To qualitatively and quantitatively assess integrated segmentation of three convolutional neural network (CNN) models for the creation of a maxillary virtual patient (MVP) from cone-beam computed tomography (CBCT) images. MATERIALS AND METHODS: A dataset of 40 CBCT scans acquired with different scanning parameters was selected. Three previously validated individual CNN models were integrated to achieve a combined segmentation of maxillary complex, maxillary sinuses, and upper dentition. Two experts performed a qualitative assessment, scoring-integrated segmentations from 0 to 10 based on the number of required refinements. Furthermore, experts executed refinements, allowing performance comparison between integrated automated segmentation (AS) and refined segmentation (RS) models. Inter-observer consistency of the refinements and the time needed to create a full-resolution automatic segmentation were calculated. RESULTS: From the dataset, 85% scored 7-10, and 15% were within 3-6. The average time required for automated segmentation was 1.7 min. Performance metrics indicated an excellent overlap between automatic and refined segmentation with a dice similarity coefficient (DSC) of 99.3%. High inter-observer consistency of refinements was observed, with a 95% Hausdorff distance (HD) of 0.045 mm. CONCLUSION: The integrated CNN models proved to be fast, accurate, and consistent along with a strong interobserver consistency in creating the MVP. CLINICAL RELEVANCE: The automated segmentation of these structures simultaneously could act as a valuable tool in clinical orthodontics, implant rehabilitation, and any oral or maxillofacial surgical procedures, where visualization of MVP and its relationship with surrounding structures is a necessity for reaching an accurate diagnosis and patient-specific treatment planning.

Dose-response relationship between toothpaste soluble fluoride absorbed in the gastrointestinal tract and saliva fluoride secretion

Aim: This study aimed to evaluate if there is a dose-response relationship between toothpaste chemically soluble fluoride absorbed in the gastrointestinal tract and fluoride secreted by saliva, giving support to the use of saliva as surrogate for plasma fluoride. Methods: A 4-phase single blind study was conducted, in which 10 participants were subjected in each phase to one of the assigned treatment groups: group I: fresh sample of a Na2FPO3/CaCO3-based toothpaste with 1,334 µg F/g of total soluble fluoride (TSF) and groups II­IV: aged samples of this toothpaste presenting TSF concentrations of 1,128, 808, and 687 µg F/g, respectively. In all phases, the participants ingested an amount of toothpaste equivalent to 70.0 µg F/Kg body weight, as total fluoride (TF). Saliva and blood samples were collected before (baseline) and up to 180 min after toothpaste ingestion as indicator of fluoride bioavailability. F concentration in saliva and blood plasma was determined with a fluoride ion-specific electrode. The areas under the curve (AUC) of F concentration versus time (AUC = ng F/mL × min) and the peaks of fluoride concentration (Cmax) in saliva and plasma were calculated. Results: A significant correlation between mg of TSF ingested and the AUC (r=0.47; p<0.01), and Cmax (r=0.59; p<0.01) in saliva was found; for TF, the correlation was not significant (p>0.05). In addition, the correlations between plasma and saliva fluoride concentrations were statistically significant for AUC (r=0.55; p<0.01) as for Cmax (r=0.68; p<0.01). Conclusion: The findings support that saliva can be used as a systemic biomarker of bioavailable fluoride present in Na2FPO3/CaCO3-based toothpaste

Fluoride toothpaste, sanitary surveillance and the SUS: the case of Manaus-AM, Brazil.

OBJECTIVE: To determine the anticaries potential of toothpastes distributed by the primary health care public clinics (UBS) of Manaus, AM. METHODS: Ninety-nine tubes of toothpaste from four commercial brands were collected from October 7, 2019 to October 11, 2019 in 16 UBS. They were assigned a code by brand and source UBS. According to the information on the packaging, the four brands and their batches were formulated with sodium monofluorophosphate (Na2FPO3) and most (91%) had calcium carbonate (CaCO3) as an abrasive. We determined the concentrations of total fluoride (TF = TSF + InsF) and total soluble fluoride (TSF = F ions- or FPO32-), to certify whether they were in compliance with resolution ANVISA RDC No. 530 (maximum of 1,500 ppm TF) and whether they had anticaries potential (minimum of 1,000 ppm TSF). The analyses were performed with a ion- specific electrode. RESULTS: The concentrations (ppm F) of TF [mean; standard deviation (SD); n] found in toothpaste brands A (1,502.3; SD = 45.6; n = 33), B (1,135.5; SD = 52.7; n = 48) and D (936.8; SD = 20.5; N = 8) were close to those stated on the package, 1,500, 1,100 and 1,000 ppm F, respectively. In toothpaste C, we found a mean of 274.1 ppm (SD = 219.7; n = 10) of TF, which diverges from the declared concentration of 1,500 ppm F. In addition, the five tubes of lot no. 11681118 of toothpaste C did not contain fluoride. Regarding TSF, with the exception of toothpaste D (937.9; SD = 40.29), the others had a lower concentration than their respective TF. CONCLUSION: We found serious problems of quantity and quality of fluoride in toothpaste distributed by the SUS in Manaus, which shows the need for surveillance of these products and confirms the urgency of revising resolution RDC No. 530.

Fluoridated water impact on tooth decay and fluorosis in 17-20-year-olds exposed to fluoride toothpaste.

OBJECTIVE: To determine the impact of water fluoridation on the prevalence and severity of dental caries and fluorosis in individuals aged 17-20 years exposed to fluoride toothpaste. METHODS: The study population consisted of 660 students from public schools, residents of areas supplied with fluoridated water (exposed group) or not (not exposed group). Students from both groups had access to fluoride toothpaste throughout life. A questionnaire about socioeconomic demographic aspects, conditions related to access and exposure to fluoridated water, and habits related to oral health was applied. Dental caries was measured by the DMFT index and dental fluorosis by the TF index. The chi-square test, t test, and subsequently logistic regression were applied for data analysis. RESULTS: Caries experience (DMFT≠0) was significantly higher in students from areas not exposed to fluoridated water, after adjustments to clinical conditions, demographic socioeconomic profile, and hygiene habits. The DMFT mean (±SD) was significantly higher in students from areas not exposed to fluoridated water than exposed (3.83 [±3.28] and 2.48 [±2.71] respectively). The prevalence of very mild/mild and moderate fluorosis was 41.1% and 21% for students either exposed to fluoridated water or not, respectively. CONCLUSION: Exposure to fluoridated water was associated with a lower prevalence and severity of tooth decay, in spite of the use of fluoridated toothpaste. The prevalence of dental fluorosis at all levels was higher in fluoridated areas, however, in both groups, there were few cases with esthetic implications.

Prevalence and features of elongated styloid process on imaging studies: a systematic review and meta-analysis.

OBJECTIVE: To determine the prevalence of the elongated styloid process (ESP) and its characteristics, such as sex and age of the patient, unilateral and bilateral incidence, besides variations between different populations and panoramic and CBCT examinations. MATERIALS AND METHODS: A search was performed in six databases (PubMed, Web of Science, Scopus, Cochrane, Lilacs, and Embase) to identify observational studies that used imaging exams and assessed ESP prevalence among panoramic radiograph CBCT examinations, whose transversal prevalence studies were included. Furthermore, studies with a specific group of patients or symptomatic patients were excluded. Additionally, Joanna Briggs Institute checklist was used to evaluate the quality of the studies. A meta-analysis was conducted, then subgroup analyses were performed by grouping studies according to the secondary outcomes, with a significance level set at 5%. The Grading of Recommendations Assessment, Development, and Evaluation system was used to rate the certainty in the evidence. RESULTS: The initial search resulted in 1635 studies, from which 39 articles met the inclusion criteria, encompassing 50,655 participants. The sample size varied between 82 and 5,000 participants. The prevalence of the ESP ranged from 1.3 to 94.8%, with an overall prevalence of 30.2%. The bilateral occurrence was higher than the unilateral one, but no significant predilection was observed according to sex, age, or population. The type of imaging examination also showed no difference in its detection. CONCLUSION: The overall prevalence of ESP was 30.2%, with a propensity for bilaterality, but not for any sex, age, or population geographic location. The imaging examination modality did not influence the diagnosis of ESP. However, the quality level of the studies evaluated was very low, demonstrating the need for more homogeneous primary studies on the prevalence of the ESP with a more standardized methodology. CLINICAL RELEVANCE: There is no consensus in the literature regarding the prevalence of the ESP and the characteristics of the affected patients that can cause chronic and debilitating discomfort in the head and neck region. Therefore, knowledge about the prevalence and characteristics of this condition would help dental clinicians reach the correct diagnosis.

Fluoride toothpaste, sanitary surveillance and the SUS: the case of Manaus-AM, Brazil / Dentifrício fluoretado, vigilância sanitária e o SUS: o caso de Manaus-AM

ABSTRACT OBJECTIVE To determine the anticaries potential of toothpastes distributed by the primary health care public clinics (UBS) of Manaus, AM. METHODS Ninety-nine tubes of toothpaste from four commercial brands were collected from October 7, 2019 to October 11, 2019 in 16 UBS. They were assigned a code by brand and source UBS. According to the information on the packaging, the four brands and their batches were formulated with sodium monofluorophosphate (Na2FPO3) and most (91%) had calcium carbonate (CaCO3) as an abrasive. We determined the concentrations of total fluoride (TF = TSF + InsF) and total soluble fluoride (TSF = F ions- or FPO32-), to certify whether they were in compliance with resolution ANVISA RDC No. 530 (maximum of 1,500 ppm TF) and whether they had anticaries potential (minimum of 1,000 ppm TSF). The analyses were performed with a ion- specific electrode. RESULTS The concentrations (ppm F) of TF [mean; standard deviation (SD); n] found in toothpaste brands A (1,502.3; SD = 45.6; n = 33), B (1,135.5; SD = 52.7; n = 48) and D (936.8; SD = 20.5; N = 8) were close to those stated on the package, 1,500, 1,100 and 1,000 ppm F, respectively. In toothpaste C, we found a mean of 274.1 ppm (SD = 219.7; n = 10) of TF, which diverges from the declared concentration of 1,500 ppm F. In addition, the five tubes of lot no. 11681118 of toothpaste C did not contain fluoride. Regarding TSF, with the exception of toothpaste D (937.9; SD = 40.29), the others had a lower concentration than their respective TF. CONCLUSION We found serious problems of quantity and quality of fluoride in toothpaste distributed by the SUS in Manaus, which shows the need for surveillance of these products and confirms the urgency of revising resolution RDC No. 530.

RESUMO OBJETIVO Determinar o potencial anticárie dos dentifrícios distribuídos pelas unidades básicas de saúde (UBS) de Manaus-AM. MÉTODOS Noventa e nove bisnagas de dentifrícios de quatro marcas comerciais foram coletadas de 7 de outubro de 2019 a 11 de outubro de 2019 em 16 UBS, que foram codificados por marca e UBS de origem. De acordo com a embalagem, os dentifrícios das quatro marcas e seus lotes foram formulados com monofluorofosfato de sódio (Na2FPO3) e a maioria (91%) tinha carbonato de cálcio (CaCO3) como abrasivo. Foram determinadas as concentrações de fluoreto total (FT = FST + Fins) e de fluoreto solúvel total (FST = íons F- ou FPO32-), para certificar se atendiam à resolução ANVISA RDC Nº 530 (máximo de 1.500 ppm de FT) e se tinham potencial anticárie (mínimo de 1.000 ppm de FST). As análises foram feitas com eletrodo íon específico. RESULTADOS As concentrações (ppm F) de FT [média; desvio padrão (DP); n] encontradas nos dentifrícios A (1.502,3; DP = 45,6; n = 33), B (1.135,5; DP = 52,7; n = 48) e D (936,8; DP = 20,5; n = 8) foram próximas ao descrito na embalagem, 1.500, 1.100 e 1.000 ppm F, respectivamente. No dentifrício C, foi encontrada média de 274,1 ppm (DP = 219,7; n = 10) de FT, divergindo da concentração declarada de 1.500 ppm F. Em acréscimo, as cinco bisnagas do lote no 11681118 do dentifrício C não foram fluoretadas. Quanto ao FST, à exceção do dentifrício D (937,9; DP = 40,29), os demais apresentaram concentração inferior ao seu respectivo FT. CONCLUSÃO Observou-se problemas graves de quantidade e qualidade do fluoreto nos dentifrícios distribuídos pelo SUS em Manaus, mostrando a necessidade de vigilância desses produtos e ratificando a urgência da revisão da resolução ANVISA RDC Nº 530.

Effect of fluoridated water on dental caries and fluorosis in schoolchildren who use fluoridated dentifrice.

This cross-sectional study evaluated the prevalence and severity of dental caries and fluorosis in children and adolescents using fluoridated toothpaste, from areas with and without fluoridated water. Parents of 5-year-old children and 12-year-old adolescents from neighbourhoods that are supplied with and without fluoridated water answered questionnaires for determining socio-economic and demographic characteristics and habits related to oral health. The individuals were examined, and dental caries and fluorosis were measured by dmft/DMFT and TF indexes, respectively. Descriptive, bivariate and logistic regression analyses were performed (p < 0.05). Of 692 participants, 47.7% were 5-year-olds and 52.3% were 12-year-olds. The mean dmft/DMFT in the 5-year-olds/ 12-year-olds from Exposed and Not Exposed fluoridated water groups was 1.53 (± 2.47) and 3.54 (± 4.10) / 1.53 (± 1.81) and 3.54 (± 3.82), respectively. Children (OR = 2.86, 95% CI = 1.71-4.75) and adolescents (OR = 1.95, 95% CI = 1.24-3.05), who did not consume fluoridated water, had greater caries experience. Among adolescents, there was an association between fluoridated water and the prevalence of very mild/mild fluorosis (OR = 5.45, 95% CI: 3.23-9.19) and moderate fluorosis (OR = 11.11, 95% CI = 4.43-27.87). Children and adolescents, who consumed fluoridated water, presented lower prevalence and severity of dental caries compared to those who used only fluoridated toothpaste as the source of fluoride. There is an association between water fluoridation and very mild/mild and moderate fluorosis in adolescents.

Fluoride bioavailability on demineralized enamel by commercial mouth rinses.

The ability of mouth rinses, available in the international market, to form reaction products on demineralized enamel (bioavailability test) was evaluated in vitro. Nine mouth rinses purchased in Chile were evaluated; eight formulated with NaF (one containing 100 µg F/mL and seven containing 226) and one with Na2FPO3 (226 µg F/mL as ion F). Demineralized enamel slabs (n=15 per mouth rinse) were sectioned; one half was subjected to the assigned mouth rinse treatment for 10 min and the other half was used to obtain baseline data. Loosely bound and firmly bound fluoride formed on enamel were determined with an ion-specific electrode and the values were expressed in µg F/cm2. The concentration of fluoride and the pH of the mouth rinses were previously determined. Concentrations of loosely bound and firmly bound fluoride formed on enamel were independently analyzed by ANOVA and Tukey's test (α=5%). The loosely bound and firmly bound fluoride concentrations (µg F/cm2) formed ranged from 3.2 to 36.2 and 0.4 to 1.7, respectively. Loosely bound fluoride formed on enamel was significantly more effective in discriminating the effect of different commercial mouth rinses than firmly bound fluoride. Mouth rinses with 226 ppm F as NaF and low pH presented significantly greater bioavailability of fluoride on enamel than those with higher pH or lower NaF concentration. The mouth rinse with Na2FPO3 showed low reactivity. Although further studies are necessary, the findings showed that commercial fluoride-containing mouth rinses have important variations in enamel fluoride bioavailability, which may result in differences on anticaries efficacy.

Fluoride bioavailability on demineralized enamel by commercial mouthrinses.

The ability of mouthrinses, available in the international market, to form reaction products on demineralized enamel (bioavailability test) was evaluated in vitro. Nine mouthrinses purchased in Chile were evaluated; eight formulated with NaF (one containing 100 µg F/mL and seven containing 226) and one with Na2FPO3 (226 µg F/mL as ion FPO3 ). Demineralized enamel slabs (n=15 per mouthrinse) were sectioned; one half was subjected to the assigned mouthrinse treatment for 10 min and the other half was used to obtain baseline data. Loosely bound and firmly bound fluoride formed on enamel were determined with an ion-specific electrode and the values were expressed in µg F/cm2. The concentration of fluoride and the pH of the mouthrinses were previously determined. Concentrations of loosely bound and firmly bound fluoride formed on enamel were independently analyzed by ANOVA and Tukey's test (α=5%). The loosely bound and firmly bound fluoride concentrations formed ranged from 3.2 to 36.2 and 0.4 to 1.7, respectively. Loosely bound fluoride formed on enamel was significantly more effective in discriminating the effect of different commercial mouthrinses than firmly bound fluoride. Mouthrinses with 226 ppm F as NaF and low pH presented significantly greater bioavailability of fluoride on enamel than those with higher pH or lower NaF concentration. The mouthrinse with Na2FPO3 showed low reactivity. Although further studies are necessary, the findings showed that commercial fluoride-containing mouthrinses have important variations in enamel fluoride bioavailability, which may result in differences on anticaries efficacy.

Fluoride concentration in mouth rinses marketed in Chile and Brazil, and a discussion regarding their legislations.

For fluoride to be effective in controlling caries, it should be bioavailable in commercial products, so that it can be released into the mouth in the products it contains. We chemically determined the available fluoride and pH in nine mouth rinses marketed in Chile, and eleven, in Brazil, and then discussed the legislation in force in both countries, regarding the anticaries potential of these oral hygiene products. The fluoride was analyzed with an ion-selective electrode (F-ISE), using the direct technique. The determinations were made in duplicate, and the results were expressed in ppm F (µg F/mL). The total fluoride concentration found in all the mouth rinses evaluated ranged from 94.7 to 233.5 ppm F, and closely matched what was declared by the manufacturers (100.0 to 226.2 ppm F). However, some mouth rinses showed lower fluoride concentrations (90 and 180 ppm F) in both countries. A Na2FPO3-formulated mouth rinse was found only in Chile, with 216.8 ppm F as the FPO32- ion, and 4.9 ppm F as the F-. The findings show that fluoride was potentially bioavailable in all the mouth rinses evaluated. Regarding the national legislations, although the mouthwashes sold in Brazil comply with the Brazilian legislation, discrepancies were found for Chile. However, neither country had a legislation matching the best available evidence on fluoride mouthwash efficacy for caries control. Thus, some products with low fluoride concentrations (below 226 ppm F), or manufactured with a fluoride salt other than NaF (Na2FPO3) are being sold in the Brazilian and Chilean markets.

Fluoride bioavailability on demineralized enamel by commercial mouth rinses

Abstract The ability of mouth rinses, available in the international market, to form reaction products on demineralized enamel (bioavailability test) was evaluated in vitro. Nine mouth rinses purchased in Chile were evaluated; eight formulated with NaF (one containing 100 µg F/mL and seven containing 226) and one with Na2FPO3 (226 µg F/mL as ion F). Demineralized enamel slabs (n=15 per mouth rinse) were sectioned; one half was subjected to the assigned mouth rinse treatment for 10 min and the other half was used to obtain baseline data. Loosely bound and firmly bound fluoride formed on enamel were determined with an ion-specific electrode and the values were expressed in µg F/cm2. The concentration of fluoride and the pH of the mouth rinses were previously determined. Concentrations of loosely bound and firmly bound fluoride formed on enamel were independently analyzed by ANOVA and Tukey's test (α=5%). The loosely bound and firmly bound fluoride concentrations (µg F/cm2) formed ranged from 3.2 to 36.2 and 0.4 to 1.7, respectively. Loosely bound fluoride formed on enamel was significantly more effective in discriminating the effect of different commercial mouth rinses than firmly bound fluoride. Mouth rinses with 226 ppm F as NaF and low pH presented significantly greater bioavailability of fluoride on enamel than those with higher pH or lower NaF concentration. The mouth rinse with Na2FPO3 showed low reactivity. Although further studies are necessary, the findings showed that commercial fluoride-containing mouth rinses have important variations in enamel fluoride bioavailability, which may result in differences on anticaries efficacy.

Resumo Os enxaguatórios bucais comerciais fluoretados diferem na concentração e tipo de sal de fluoreto, no pH e têm alguns ingredientes que podem interferir na reatividade do fluoreto com o esmalte desmineralizado. A capacidade de enxaguatórios bucais comerciais de formar produtos de reação em esmalte desmineralizado (teste de biodisponibilidade) foi avaliada in vitro. Nove enxaguatórios bucais adquiridos no Chile foram avaliados, oito formulados com NaF (um contendo 100 µg F/mL e sete contendo 226) e um com Na2FPO3 (226 µg F/mL como íon F). Os blocos de esmalte desmineralizados (n=15 por grupo) foram seccionados, uma metade foi submetida ao tratamento com o enxaguatório designado por 10 min e a outra metade foi usada para dados baseline. Fluoreto fracamente e firmemente ligados formados no esmalte foram determinados com um eletrodo íon-específico e os valores foram expressos em µg F /cm2. A concentração de fluoreto e o pH dos enxaguatórios foi previamente determinada. As concentrações de fluoreto tipo fluoreto fracamente ligado e fortemente ligado formadas no esmalte foram analisadas independentemente por ANOVA e teste de Tukey (α=5%). As concentrações de fluoreto fracamente ligado e fortemente ligado formados variaram de 3,2 a 36,2 e 0,4 a 1,7, respectivamente. O fluoreto fracamente ligado formado no esmalte foi significativamente mais eficaz para discriminar o efeito dos diferentes enxaguatórios bucais comerciais do que o fluoreto firmemente ligado. Enxaguatórios bucais com 226 ppm F na forma de NaF e baixo pH apresentaram significativamente maior biodisponibilidade de fluoreto no esmalte do que aqueles com maior pH ou menor concentração de NaF. O enxaguatório com Na2FPO3 apresentou reatividade muito baixa. Embora mais estudos sejam necessários, os resultados mostraram que os enxaguatórios bucais comerciais contendo fluoreto apresentam variações importantes na biodisponibilidade do fluoreto, o que poderia resultar em diferenças na eficácia anticárie.

Effect of fluoridated water on dental caries and fluorosis in schoolchildren who use fluoridated dentifrice

Abstract This cross-sectional study evaluated the prevalence and severity of dental caries and fluorosis in children and adolescents using fluoridated toothpaste, from areas with and without fluoridated water. Parents of 5-year-old children and 12-year-old adolescents from neighbourhoods that are supplied with and without fluoridated water answered questionnaires for determining socio-economic and demographic characteristics and habits related to oral health. The individuals were examined, and dental caries and fluorosis were measured by dmft/DMFT and TF indexes, respectively. Descriptive, bivariate and logistic regression analyses were performed (p < 0.05). Of 692 participants, 47.7% were 5-year-olds and 52.3% were 12-year-olds. The mean dmft/DMFT in the 5-year-olds/ 12-year-olds from Exposed and Not Exposed fluoridated water groups was 1.53 (± 2.47) and 3.54 (± 4.10) / 1.53 (± 1.81) and 3.54 (± 3.82), respectively. Children (OR = 2.86, 95% CI = 1.71-4.75) and adolescents (OR = 1.95, 95% CI = 1.24-3.05), who did not consume fluoridated water, had greater caries experience. Among adolescents, there was an association between fluoridated water and the prevalence of very mild/mild fluorosis (OR = 5.45, 95% CI: 3.23-9.19) and moderate fluorosis (OR = 11.11, 95% CI = 4.43-27.87). Children and adolescents, who consumed fluoridated water, presented lower prevalence and severity of dental caries compared to those who used only fluoridated toothpaste as the source of fluoride. There is an association between water fluoridation and very mild/mild and moderate fluorosis in adolescents.

Resumo Este estudo transversal avaliou a prevalência e severidade de cárie dentária e fluorose em crianças de 5 anos e adolescentes de 12 anos usuários de dentifrício fluoretado, em áreas com e sem água fluoretada. Os responsáveis pelas crianças e adolescentes responderam questionários para determinação de características socioeconômicas e demográficas e hábitos relacionados à saúde. Os indivíduos foram examinados e a cárie e a fluorose foram mensuradas pelos índices ceo-d / CPOD e TF, respectivamente. Foram realizadas análises descritivas, bivariadas e de regressão logística (p <0,05). Dos 692 participantes, 47,7% tinham 5 anos e 52,3% tinham 12 anos. A média de ceod / CPOD em crianças de 5/12 anos dos grupos de exposto e não exposto à água fluoretada foi 1,53 (± 2,47) e 3,54 (± 4,10) / 1,53 (± 1,81) e 3,54 (± 3,82), respectivamente. Crianças (OR = 2,86, IC 95% = 1,71-4,75) e adolescentes (OR = 1,95, IC 95% = 1,24-3,05) que não consumiram água fluoretada tiveram maior experiência de cárie. Entre os adolescentes, houve associação entre a água fluoretada e a prevalência de fluorose muito leve / leve (OR = 5,45, IC 95%: 3,23-9,19) e fluorose moderada (OR = 11,11, IC 95% = 4,43-27,87). Crianças e adolescentes que consumiram água fluoretada apresentaram menor prevalência e severidade de cárie dentária em comparação com aqueles que usaram apenas dentifrício fluoretado como fonte de flúor. Houve uma associação entre a fluoretação da água e fluorose muito leve / leve e moderada em adolescentes.