Copper supplementation alleviates hypoxia­induced ferroptosis and oxidative stress in neuronal cells.

Hypoxic ischemia is the primary cause of brain damage in newborns. Notably, copper supplementation has potential benefits in ischemic brain damage; however, the precise mechanisms underlying this protective effect remain unclear. In the present study, a hypoxic HT22 cell model was developed to examine the mechanism by which copper mitigates hypoxia­induced oxidative stress. Cell viability was assessed using the Cell Counting Kit­8 assay, mitochondrial structure was examined with a transmission electron microscope, intracellular ferrous ions and lipid reactive oxygen species levels in HT22 cells were measured using FerroOrange and BODIPY 581/591 C11 staining, copper content was determined using graphite furnace atomic absorption spectroscopy, and gene and protein expression were analyzed by reverse transcription­quantitative PCR and western blotting. The present findings indicated that hypoxic exposure may lead to reduced cell viability, along with the upregulation of various markers associated with ferroptosis. Furthermore, hypoxia elevated the levels of reactive oxygen species, hydrogen peroxide and malondialdehyde, and decreased the activity of superoxide dismutase 1 (SOD1) in HT22 cells. In addition, the intracellular copper concentration exhibited a notable decrease, while supplementation with an appropriate dose of copper effectively shielded neurons from hypoxia­induced oxidative stress and ferroptosis, and elevated cell viability in hypoxia­exposed HT22 cells through the copper chaperone for superoxide dismutase/SOD1/glutathione peroxidase 4 axis. In conclusion, the present study identified a novel function of copper in protecting neurons from oxidative stress and ferroptosis under hypoxic conditions, providing fresh insights into the therapeutic potential of copper in mitigating hypoxia­induced neuronal injury.

Electrode and Electrolyte Co-Energy-Storage Electrochemistry Enables High-Energy Zn-S Decoupled Batteries.

In the search for next-generation green energy storage solutions, Cu-S electrochemistry has recently gained attraction from the battery community owing to its affordability and exceptionally high specific capacity of 3350 mAh gs -1. However, the inferior conductivity and substantial volume expansion of the S cathode hinder its cycling stability, while the low output voltage limits its energy density. Herein, a hollow carbon sphere (HCS) is synthesized as a 3D conductive host to achieve a stable S@HCS cathode, which enables an outstanding cycling performance of 2500 cycles (over 9 months). To address the latter, a Zn//S@HCS alkaline-acid decoupled cell is configured to increase the output voltage from 0.18 to 1.6 V. Moreover, an electrode and electrolyte co-energy storage mechanism is proposed to offset the reduction in energy density resulting from the extra electrolyte required in Zn//S decoupled cells. When combined, the Zn//S@HCS alkaline-acid decoupled cell delivers a record energy density of 334 Wh kg-1 based on the mass of the S cathode and CuSO4 electrolyte. This work tackles the key challenges of Cu-S electrochemistry and brings new insights into the rational design of decoupled batteries.

Enhancing Proton Co-Intercalation in Iron Ion Batteries Cathodes for Increased Capacity.

Recently, aqueous iron ion batteries (AIIBs) using iron metal anodes have gained traction in the battery community as low-cost and sustainable solutions for green energy storage. However, the development of AIIBs is significantly hindered by the limited capacity of existing cathode materials and the poor intercalation kinetic of Fe2+. Herein, we propose a H+ and Fe2+ co-intercalation electrochemistry in AIIBs to boost the capacity and rate capability of cathode materials such as iron hexacyanoferrate (FeHCF) and Na4Fe3(PO4)2(P2O7) (NFPP). This is achieved through an electrochemical activation step during which a FeOOH nanowire layer is formed in situ on the cathode. This layer facilitates H+ co-intercalation in AIIBs, resulting in a high specific capacity of 151 mAh g-1 and 93% capacity retention over 500 cycles for activated FeHCF cathodes. We found that this activation process can also be applied to other cathode chemistries, such as NFPP, where we found that the cathode capacity is doubled as a result of this process. Overall, the proposed H+/Fe2+ co-insertion electrochemistry expands the range of applications for AIBBs, in particular as a sustainable solution for storing renewable energy.

Organic solid-electrolyte interface layers for Zn metal anodes.

Zinc ion batteries (ZIBs) have emerged as promising candidates for renewable energy storage owing to their affordability, safety, and sustainability. However, issues with Zn metal anodes, such as dendrite growth, hydrogen evolution reaction (HER), and corrosion, significantly hinder the practical application of ZIBs. To address these issues, organic solid electrolyte interface (SEI) layers have gained traction in the ZIB community as they can, for instance, help achieve uniform Zn plating/stripping and suppress side reactions. This article summarizes recent advances in organic artificial SEI layers for ZIB anodes, including their fabrication methods, electrochemical performance, and degradation suppression mechanisms.

Redesigning Solvation Structure toward Passivation-Free Magnesium Metal Batteries.

Simple magnesium (Mg) salt solutions are widely considered as promising electrolytes for next-generation rechargeable Mg metal batteries (RMBs) owing to the direct Mg2+ storage mechanism. However, the passivation layer formed on Mg metal anodes in these electrolytes is considered the key challenge that limits its applicability. Numerous complex halogenide additives have been introduced to etch away the passivation layer, nevertheless, at the expense of the electrolyte's anodic stability and cathodes' cyclability. To overcome this dilemma, here, we design an electrolyte with a weakly coordinated solvation structure which enables passivation-free Mg deposition while maintaining a high anodic stability and cathodic compatibility. In detail, we successfully introduce a hexa-fluoroisopropyloxy (HFIP-) anion into the solvation structure of Mg2+, the weakly [Mg-HFIP]+ contact ion pair facilitates Mg2+ transportation across interfaces. As a consequence, our electrolyte shows outstanding compatibility with the RMBs. The Mg||PDI-EDA and Mg||Mo6S8 full cells use this electrolyte demonstrating a decent capacity retention of ∼80% over 400 cycles and 500 cycles, respectively. This represents a leap in cyclability over simple electrolytes in RMBs while the rest can barely cycle. This work offers an electrolyte system compatible with RMBs and brings deeper understanding of modifying the solvation structure toward practical electrolytes.

Large-Scale Integration of the Ion-Reinforced Phytic Acid Layer Stabilizing Magnesium Metal Anode.

Rechargeable magnesium batteries (RMBs) have garnered significant attention for their potential in large-scale energy storage applications. However, the commercial development of RMBs has been severely hampered by the rapid failure of large-sized Mg metal anodes, especially under fast and deep cycling conditions. Herein, a concept proof involving a large-scale ion-reinforced phytic acid (PA) layer (100 cm × 7.5 cm) with an excellent water-oxygen tolerance, high Mg2+ conductivity, and favorable electrochemical stability is proposed to enable rapid and uniform plating/stripping of Mg metal anode. Guided by even distributions of Mg2+ flux and electric field, the as-prepared large-sized PA-Al@Mg electrode (5.8 cm × 4.5 cm) exhibits no perforation and uniform Mg plating/stripping after cycling. Consequently, an ultralong lifespan (2400 h at 3 mA cm-2 with 1 mAh cm-2) and high current tolerance (300 h at 9 mA cm-2 with 1 mAh cm-2) of the symmetric cell using the PA-Al@Mg anode could be achieved. Notably, the PA-Al@Mg//Mo6S8 full cell demonstrates exceptional stability, operating for 8000 cycles at 5 C with a capacity retention of 99.8%, surpassing that of bare Mg (3000 cycles, 74.7%). Moreover, a large-sized PA-Al@Mg anode successfully contributes to the stable pouch cell (200 and 750 cycles at 0.1 and 1 C), further confirming its significant potential for practical utilization. This work provides valuable theoretical insights and technological support for the practical implementation of RMBs.

Catalyzing Desolvation at Cathode-Electrolyte Interface Enabling High-Performance Magnesium-Ion Batteries.

Magnesium ion batteries (MIBs) are expected to be the promising candidates in the post-lithium-ion era with high safety, low cost and almost dendrite-free nature. However, the sluggish diffusion kinetics and strong solvation capability of the strongly polarized Mg2+ are seriously limiting the specific capacity and lifespan of MIBs. In this work, catalytic desolvation is introduced into MIBs for the first time by modifying vanadium pentoxide (V2O5) with molybdenum disulfide quantum dots (MQDs), and it is demonstrated via density function theory (DFT) calculations that MQDs can effectively lower the desolvation energy barrier of Mg2+, and therefore catalyze the dissociation of Mg2+-1,2-Dimethoxyethane (Mg2+-DME) bonds and release free electrolyte cations, finally contributing to a fast diffusion kinetics within the cathode. Meanwhile, the local interlayer expansion can also increase the layer spacing of V2O5 and speed up the magnesiation/demagnesiation kinetics. Benefiting from the structural configuration, MIBs exhibit superb reversible capacity (≈300 mAh g-1 at 50 mA g-1) and unparalleled cycling stability (15 000 cycles at 2 A g-1 with a capacity of ≈70 mAh g-1). This approach based on catalytic reactions to regulate the desolvation behavior of the whole interface provides a new idea and reference for the development of high-performance MIBs.

Theoretical insights into the intercalation mechanism of Li, Na, and Mg ions in a metallic BN/VS2 heterostructure.

Layered VS2 has been widely used as a battery anode material owing to its large specific surface area and controllable ion-transport channel. However, its semiconductor properties and poor cycling stability seriously limit its further applications. Herein, a two-dimensional BN/VS2 heterostructure (BVH) was constructed as an anode material for rechargeable metal-ion batteries (RMIBs). Demonstrated using first principles calculations, BVH exhibits a metallic property due to lattice stress between monolayer BN and VS2. BVH displays low ion diffusion energy barriers (0.13, 0.43, and 0.56 eV) and high theoretical capacities (447, 553.5, and 340.7 mA h g-1) for Li+, Na+, and Mg2+ storage. In BVH, the VS2 layer as the main redox center supports charge transfer, while the inactive BN layer enables high structural stability. This synergistic effect is expected to simultaneously achieve a high rate, high capacity, and long life. This design provides an important insight into developing new anode materials for RMIBs.

Percolating Network of Anionic Vacancies in Prussian Blue: Origin of Superior Ammonium-Ion Storage Performance.

Emerging aqueous ammonium-ion batteries (AIBs) are considered inexpensive, highly safe, ecofriendly, and sustainable energy storage systems. Although some high-performance electrode materials have been reported for AIBs, a comprehensive understanding of the origin of the high ammonium-ion storage performance is still lacking. Herein, the percolating network of anionic vacancies is determined to be the origin of the superior ammonium-ion storage properties of the Prussian blue analogues based on ab initio molecular dynamics simulation and electrochemical kinetic analyses. Fe[Fe(CN)6] with a percolating anionic vacancy network delivers an outstanding rate of 64.7 mAh g-1 at 2000 mA g-1 in addition to a capacity retention of 94.5% after 10 000 cycles. The low-strain intercalation ammonium-ion storage mechanism of highly deficient Fe Prussian blue with Fe as the redox center is revealed by in situ X-ray diffraction and ex situ X-ray absorption fine structure analysis. The results provide insights into the mechanism of ammonium-ion storage in Prussian blue analogues and guidance in the development of aqueous AIBs.

Organic Molecular Intercalation Enabled Anionic Redox Chemistry with Fast Kinetics for High Performance Magnesium Storage.

Rechargeable magnesium-ion batteries possess desirable characteristics in large-scale energy storage applications. However, severe polarization, sluggish kinetics and structural instability caused by high charge density Mg2+ hinder the development of high-performance cathode materials. Herein, the anionic redox chemistry in VS4 is successfully activated by inducing cations reduction and introducing anionic vacancies via polyacrylonitrile (PAN) intercalation. Increased interlayer spacing and structural vacancies can promote the electrolyte ions migration and accelerate the reaction kinetics. Thanks to this "three birds with one stone" strategy, PAN intercalated VS4 exhibits an outstanding electrochemical performance: high discharge specific capacity of 187.2 mAh g-1 at 200 mA g-1 after stabilization and a long lifespan of 5000 cycles at 2 A g-1 are achieved, outperforming other reported VS4-based materials to date for magnesium storage under the APC electrolyte. Theoretical calculations confirm that the intercalated PAN can indeed induce cations reduction and generate anionic vacancies by promoting electron transfer, which can accelerate the electrochemical reaction kinetics and activate the anionic redox chemistry, thus improving the magnesium storage performance. This approach of organic molecular intercalation represents a promising guideline for electrode material design on the development of advanced multivalent-ion batteries.

Binary Mg-1†at%Gd alloy anode for high-performance rechargeable magnesium batteries.

Rechargeable magnesium batteries (RMBs) become a highly promising candidate for the large-scale energy storage system by right of the high volumetric capacity, intrinsic safety and abundant resources of Mg anode. However, the uneven Mg stripping and large overpotential will cause a severe pitting perforation and the followed failure of Mg anode. Herein, we proposed a high-performance binary Mg-1 at% Gd alloy anode prepared by the melting and hot extrusion. The introduction of 1 at% Gd element can effectively reduce the Mg2+ diffusion energy barrier (0.34 eV) on alloy surface and induces the formation of a robust and low-resistance electrolyte/anode interphase, thus enabling a uniform and fast Mg plating/stripping. As a result, the Mg-1 at.% Gd anode displays a largely enhanced life of 220 h and a low overpotential of 213 mV at a high current density of 5.0 mA cm-2 with 2.5 mAh cm-2 . Moreover, the assembled Mg-1 at.% Gd//Mo6 S8 full cell delivers a high rate performance (73.5 mAh g-1 at 5 C) and ultralong cycling stability of 8000 cycles at 5 C. This work brings new insights to design the new-type and practical Mg alloy anodes for commercial RMBs.

Re-imagining the daniell cell: ampere-hour-level rechargeable Zn-Cu batteries.

The Daniell cell (Cu vs. Zn), was invented almost two centuries ago, but has been set aside due to its non-rechargeable nature and limited energy density. However, these cells are exceptionally sustainable because they do not require rare earth elements, are aqueous and easy to recycle. This work addresses key challenges in making Daniell cells relevant to our current energy crisis. First, we propose new approaches to stabilise Zn and Cu plating and stripping processes and create a rechargeable cell. Second, we replace salt bridges with an anion exchange membrane, or a bipolar membrane for alkaline-acid hybrid Zn-Cu batteries operating at 1.56 V. Finally, we apply these changes in pouch cells in order to increase energy and power density. These combined developments result in a rechargeable Daniell cell, which can achieve high areal capacities of 5 mA h cm-2 and can easily be implemented in 1 A h pouch cells.

A two-dimensional VO2/VS2 heterostructure as a promising cathode material for rechargeable Mg batteries: a first principles study.

Rechargeable magnesium batteries (RMBs) are considered as highly promising energy storage systems. However, the lack of cathode materials with fast Mg2+ diffusion kinetics and high energy density severely hinders the development of RMBs. Herein, a two-dimensional (2D) VO2/VS2 heterostructure as a RMB cathode material is proposed by introducing an O-V-O layer in VS2 to improve the discharge voltage and specific capacity while keeping the fast Mg2+ diffusion kinetics. Based on first principle calculations, the geometric structures, electronic characteristics of the VO2/VS2 heterostructure, and the adsorption properties and diffusion behaviors of Mg2+ in VO2/VS2 are systematically studied. The metallic properties of VO2/VS2 and a relatively low diffusion barrier of Mg2+ (0.6 eV) in VO2/VS2 enable a large potential in delivering high rate performance in actual RMBs. Compared with traditional VS2 materials (1.25 V), the average discharge platform of VO2/VS2 could be increased to 1.7 V. The theoretical capacities of the layered VS2 and VO2/VS2 are calculated as 233 and 301 mA h g-1, respectively. Thus, the VO2/VS2 heterostructure exhibits a high theoretical energy density of 511.7 W h kg-1, significantly surpassing that of VS2 (291.3 W h kg-1). This work provides important guidance for designing high-energy and high-rate 2D heterostructure cathode materials for RMBs and other multivalent ion batteries.

Enabling Ultrafast Single Mg2+ Insertion Kinetics of Magnesium-Ion Batteries via In Situ Dynamic Catalysis and Re-equilibration Effects.

Magnesium-ion batteries (MIBs) have great potential in large-scale energy storage field with high capacity, excellent safety, and low cost. However, the strong solvation effect of Mg2+ will lead to the formation of solvated ions in electrolytes with larger size and sluggish diffusion/reaction kinetics. Here, the concept of interfacial catalytic bond breaking is first introduced into the cathode design of MIBs by hybriding MoS2 quantum dots with VS4 (VS4@MQDs) as the cathode. The "in situ dynamic catalysis and re-equilibration" effects can catalyze the Cl-Mg bond breaking and trigger single Mg2+ insertion/extraction chemistries, which can significantly accelerate the diffusion and reaction kinetics, as verified by the decreased diffusion energy barriers (0.26 eV for Mg2+ vs 2.47 eV for MgCl+) and fast diffusion coefficient. Benefitting from these dynamic catalysis effects, the constructed VS4@MQD-based MIBs deliver a high discharge capacity of ∼120 mA h g-1 at 200 mA g-1 and a long-term cyclic stability of 1000 cycles at 1 A g-1. The improved performance and detailed characterizations well prove that the active ions in MIBs change from MgCl+/Mg2Cl3+ to Mg2+ with fast kinetics.

Lead exposure disturbs ATP7B-mediated copper export from brain barrier cells by inhibiting XIAP-regulated COMMD1 protein degradation.

The brain barrier is an important structure for metal ion homeostasis. According to studies, lead (Pb) exposure disrupts the transportation of copper (Cu) through the brain barrier, which may cause impairment of the nervous system; however, the specific mechanism is unknown. The previous studies suggested the X-linked inhibitor of apoptosis (XIAP) is a sensor for cellular Cu level which mediate the degradation of the MURR1 domain-containing 1 (COMMD1) protein. XIAP/COMMD1 axis was thought to be an important regulator in Cu metabolism maintenance. In this study, the role of XIAP-regulated COMMD1 protein degradation in Pb-induced Cu disorders in brain barrier cells was investigated. Pb exposure significantly increased Cu levels in both cell types, according to atomic absorption technology testing. Western blotting and reverse transcription PCR (RT-PCR) showed that COMMD1 protein levels were significantly increased, whereas XIAP, ATP7A, and ATP7B protein levels were significantly decreased. However, there were no significant effects at the messenger RNA (mRNA) level (XIAP, ATP7A, and ATP7B). Pb-induced Cu accumulation and ATP7B expression were reduced when COMMD1 was knocked down by transient small interfering RNA (siRNA) transfection. In addition, transient plasmid transfection of XIAP before Pb exposure reduced Pb-induced Cu accumulation, increased COMMD1 protein levels, and decreased ATP7B levels. In conclusion, Pb exposure can reduce XIAP protein expression, increase COMMD1 protein levels, and specifically decrease ATP7B protein levels, resulting in Cu accumulation in brain barrier cells.

Mg-substituted Prussian blue as a low-strain cathode material for aqueous Fe-ion batteries.

Aqueous Fe-ion batteries (FIBs) have gradually emerged in recent years due to their inherent merits. Herein, we constructed a Mg-substituted Prussian blue analogue (MgFeHCF) as cathode for FIBs, achieving higher capacity (96 mA h g-1) and better stability (70.9% capacity retention over 500 cycles). The Fe-ion storage mechanism was revealed using the in situ XRD technique and DFT calculations were employed to analyse the battery performance.

Revealing the Interfacial Chemistry of Fluoride Alkyl Magnesium Salts in Magnesium Metal Batteries.

Exploring promising electrolyte-system with high reversible Mg plating/stripping and excellent stability is essential for rechargeable magnesium batteries (RMBs). Fluoride alkyl magnesium salts (Mg(ORF )2 ) not only possess high solubility in ether solvents but also compatible with Mg metal anode, thus holding a vast application prospect. Herein, a series of diverse Mg(ORF )2 were synthesized, among them, perfluoro-tert-butanol magnesium (Mg(PFTB)2 )/AlCl3 /MgCl2 based electrolyte demonstrates highest oxidation stability, and promotes the in situ formation of robust solid electrolyte interface. Consequently, the fabricated symmetric cell sustains a long-term cycling over 2000 h, and the asymmetric cell exhibits a stable Coulombic efficiency of 99.5 % over 3000 cycles. Furthermore, the Mg||Mo6 S8 full cell maintains a stable cycling over 500 cycles. This work presents guidance for understanding structure-property relationships and electrolyte applications of fluoride alkyl magnesium salts.

Serrated lithium fluoride nanofibers-woven interlayer enables uniform lithium deposition for lithium-metal batteries.

The uncontrollable formation of Li dendrites has become the biggest obstacle to the practical application of Li-metal anodes in high-energy rechargeable Li batteries. Herein, a unique LiF interlayer woven by millimeter-level, single-crystal and serrated LiF nanofibers (NFs) was designed to enable dendrite-free and highly efficient Li-metal deposition. This high-conductivity LiF interlayer can increase the Li+ transference number and induce the formation of 'LiF-NFs-rich' solid-electrolyte interface (SEI). In the 'LiF-NFs-rich' SEI, the ultra-long LiF nanofibers provide a continuously interfacial Li+ transport path. Moreover, the formed Li-LiF interface between Li-metal and SEI film renders low Li nucleation and high Li+ migration energy barriers, leading to uniform Li plating and stripping processes. As a result, steady charge-discharge in a Li//Li symmetrical cell for 1600 h under 4 mAh cm-2 and 400 stable cycles under a high area capacity of 5.65 mAh cm-2 in a high-loading Li//rGO-S cell at 17.9 mA cm-2 could be achieved. The free-standing LiF-NFs interlayer exhibits superior advantages for commercial Li batteries and displays significant potential for expanding the applications in solid Li batteries.

Mo2 C Nanoparticles Embedded in Carbon Nanowires with Surface Pseudocapacitance Enables High-Energy and High-Power Sodium Ion Capacitors.

Electrochemical sodium-ion storage technologies have become an indispensable part in the field of large-scale energy storage systems owing to the widespread and low-cost sodium resources. Molybdenum carbides with high electron conductivity are regarded as potential sodium storage anode materials, but the comprehensive sodium storage mechanism has not been studied in depth. Herein, Mo2 C nanowires (MC-NWs) in which Mo2 C nanoparticles are embedded in carbon substrate are synthesized. The sodium-ion storage mechanism is further systematically studied by in/ex situ experimental characterizations and diffusion kinetics analysis. Briefly, it is discovered that a faradaic redox reaction occurs in the surface amorphous molybdenum oxides on Mo2 C nanoparticles, while the inner Mo2 C is unreactive. Thus, the as-synthesized MC-NWs with surface pseudocapacitance display excellent rate capability (a high specific capacity of 76.5 mAh g-1 at 20 A g-1 ) and long cycling stability (a high specific capacity of 331.2 mAh g-1 at 1 A g-1 over 1500 cycles). The assembled original sodium ion capacitor displays remarkable power density and energy density. This work provides a comprehensive understanding of the sodium storage mechanism of Mo2 C materials, and constructing pseudocapacitive materials is an effective way to achieve sodium-ion storage devices with high power and energy density.

A room-temperature rechargeable dual-plating lithium-aluminium battery.

A room-temperature rechargeable dual-plating lithium-aluminium battery with a high theoretical energy density is presented. Based on the aluminium plating/stripping and lithium stripping/plating occurring at the cathode and anode sides, respectively, this lithium-aluminium battery displays an output voltage of 1.75 V (theoretically, about 2.0 V). Moreover, a "cathode-free" lithium-aluminium battery is designed, which displays good stability.