Three-dimensional ordered macroporous design of heterogeneous cobalt-iron phosphides as oxygen evolution electrocatalyst.

Oxygen evolution reaction (OER) plays a key role in electrochemical conversion, which needs efficient and economical electrocatalyst to boost its kinetics for large-scale application. Herein, a bimetallic CoP/FeP2heterostructure with a three-dimensional ordered macroporous structure (3DOM-CoP/FeP2) was synthesized as an OER catalyst to demonstrate a heterogeneous engineering induction strategy. By adjusting the electron distribution and producing a lot of active sites, the heterogeneous interface enhances catalytic performance. High specific surface area is provided by the 3DOM structure. Additionally, at the solid-gas-electrolyte threephase interface, the electrocatalytic reaction exhibits good mass transfer.In situRaman spectroscopy characterization revealed that FeOOH and CoOOH reconstructed from CoP/FeP2were the true OER active sites. Consequently, the 3DOM-CoP/FeP2demonstrates superior OER activity with a low overpotentials of 300/420 mV at 10/100 mA cm-2and meritorious OER durability. It also reveals promising performance as the overall water splitting anode.

NiFe-based electrocatalyst anchored on nanocone with tip-field effect for improved oxygen evolution reaction.

The development of high efficiency oxygen evolution electrocatalyst is of great significance for water splitting reaction. Herein, an efficient cone-structured NiFe-LDH/Nicone/Ti catalyst is fabricated by electrodeposition method towards enhanced oxygen evolution reaction (OER). The featured tip curvature of nanocone structure can accelerate the reaction kinetics of OER by offering a field-enhanced aggregation of local hydroxide ion reactant on the catalyst surface, and thus improves the performance of the NiFe catalyst. Accordingly, NiFe-LDH/Nicone/Ti requires only a low overpotential of 292 mV to achieve 50 mA cm-2, and with high stability under continuous high-current operations. In addition, the alkali-electrolyzer using NiFe-LDH/Nicone/Ti electrode exhibits good performance with a voltage of 1.73 V at 50 mA cm-2and displays excellent stability in long-term stability test. This cone-structured catalyst design with field-enhanced local hydroxide ion aggregation effect provides a promising method for the development of highly active OER electrocatalysts.

Thermal Decomposition Mechanism and Fire-Extinguishing Performance of trans-1,1,1,4,4,4-Hexafluoro-2-butene: A Potential Candidate for Halon Substitutes.

In view of the appropriate physicochemical characteristics and environmental friendliness of the trans-1,1,1,4,4,4-hexafluoro-2-butene (HFO-1336mzz(E)) substance, the thermal-decomposition mechanism as well as the fire-extinguishing mechanism and performance of this agent were systematically studied by employing both experimental and theoretical methods in this work. We found that the HFO-1336mzz(E) agent not only has promising thermal stability at room temperature but also exhibits pronounced fire-extinguishing performance, which is comparable to that of HFC-236fa and even better than that of HFC-125 extinguishant. Additionally, the promising fire-extinguishing performance of HFO-1336mzz(E) may result from the physical and chemical extinguishing effect of its thermal-decomposition products including HFO-1336mzz(Z), HC≡CCF3, CF3C≡CCF3, and CF3H, which makes a significant contribution to capturing the free radicals in the flame, as well as cooling and diluting the combustible fuel-air mixture. Both experimental and theoretical results suggest that the HFO-1336mzz(E) agent is a highly recommendable candidate for Halon extinguishant, which is worthy of further investigation and evaluation of its practical applicability in fire-suppression utilization.

Recent Advances in the Surgical Treatment of Advanced Gastric Cancer: A Review.

d_abstr_R Gastric cancer is a common malignancy with a poor prognosis, and surgical treatment remains the first-line approach to treatment to provide a cure. Despite advances in surgical techniques, radiotherapy, chemotherapy, and neoadjuvant therapy, gastric cancer remains the second leading cause of cancer death worldwide. Although the 5-year survival rate of early gastric cancer can reach >90%, due to the low early diagnosis rate, most patients present with advanced-stage gastric cancer. Therefore, there has been increasing interest in improving surgical treatment of advanced gastric cancer. Lymph node dissection is an important part of the surgical treatment of advanced gastric cancer due to the high incidence of lymph node metastasis. Although prospective studies have confirmed the safety and feasibility of laparoscopic surgery for early gastric cancer, the relevant treatment models of advanced gastric cancer still need to be further explored and validated. This review aims to provide an update on the recent advances in the surgical treatment of advanced gastric cancer.

[Effects of Oxygen Carriers on Submerged Fermentation of Poria cocos].

OBJECTIVE: To explore the regulation effects of oxygen carriers on Poria cocos submerged fermentation system which usually can be seriously inhibited by dissolved oxygen limitation. METHODS: One-factor-at-a-time design was employed to determine the oxygen carrier addition strategy through analyzing the effects of different oxygen carries, concentration and adding time of oxygen carrier on Poria cocos submerged fermentation. Then the oxygen carrier addition strategy was established and the metabolic processes of Poria cocos submerged fermentation were investigated comprehensively. RESULTS: The optimal oxygen carrier addition strategy was adding 1% (V/V) Tween-80 at 48 h after inoculation. Under this optimized condition, dry cell weight of Poria cocos reached 13.43 g/L in a 10 L bioreactor, while yields of exopolysaccharides and pachymic acid were 8.58 g/L and 989.52 µg/L, respectively, which exhibited obvious promoting effects compared with no addition oxygen carrier fermentation process. CONCLUSION: Tween-80 can remarkably increase the levels of cell growth, exopolysaccharides biosynthesis and pachymic acid in Poria cocos submerged fermentation system, which may provide new reference for further exploring dissolved oxygen limitation in high density fermentation of medical fungi efficiently.

[Biosorption of heavy metals in fluoritum decoction by fungal mycelium].

OBJECTIVE: To explore the biosorption technology of heavy metals in Fluoritum decoction by fungal mycelium. METHODS: Four factors including fungal mycelium amount, adsorption time, pH value and temperature were employed to estimate the fungal biomass adsorption conditions for removing the heavy metals in Fluoritum decoction. Then an orthogonal experimental design was taken to optimize the biosorption process, and the removal efficiency was also evaluated. RESULTS: Under the optimized conditions of 1.0 g/50 mL Fluoritum decoction, 3 hours adsorption time, pH 5.0 and 40 degrees C, a result of 70.12% heavy metals removal rate was accomplished with 35.99% calcium ion loss. CONCLUSION: The study indicates that removing of heavy metals in Fluoritum decoction through fungal mycelium is feasible, and the experiment results can also provide a basis for further research on biosorption of heavy metals in traditional Chinese medicine

[Effects of sanqi qiancao recipe on hemorheological parameters of rabbits with copper intrauterine device].

OBJECTIVE: To explore the mechanism of Sanqi Qiancao Recipe (SQR) in treating metrorrhagia caused by copper intrauterine device (IUD) in rabbits and to provide experimental evidence for preventing and treating this disease. METHODS: Fifty-six rabbits were randomly divided into seven groups, which were normal control group, sham-operation group, untreated group, indomethacin-treated group, low-dose SQR-treated group, medium-dose SQR-treated group and high-dose SQR-treated group. Copper IUD insertion was operated in rabbits of the last five groups. Rabbits in the last four groups were treated orally with indomethacin and low-, medium- and high-dose SQR respectively for a week. Rabbits in the untreated group, normal control group and sham-operation group were given distilled water orally. Hematocrit, blood viscosity at low, medium and high shear rate, plasma viscosity and blood sedimentation were examined after treatment. RESULTS: The hematocrit, blood viscosity at low, medium and high shear rate and plasma viscosity were higher in the untreated group than those in the normal control group with significant differences (P<0.01) while those indexes in low-, medium- and high-dose SQR-treated groups were significantly lower than those in the untreated group (P<0.05 or P<0.01). CONCLUSION: SQR can lead to a decrease in blood viscosity and improve the blood flow, which may be one of the mechanisms of SQR in treating metrorrhagia after copper IUD insertion.