Photoelectrochemical Ni-catalyzed cross-coupling of aryl bromides with amine at ultra-low potential.

Photoelectrochemical (PEC) cell is an ideal platform for organic transformation because of its green benefits and minimal energy consumption. As an emerging methodology, the reaction types of photoelectrocatalytic organic synthesis (PECOS) are limited to simple oxidation and C-H activation at current stage. Metal catalysis for the construction of C(sp2)-N bonds has not been touched yet in PECOS. We introduce here a PEC method that successfully engages Ni catalysis for the mild production of aniline derivatives. Experimental and computational investigations elucidate that the addition of photoanode-generated amine radical to Ni catalyst avoids the sluggish nucleophilic attack, enabling the reaction to proceed at an ultra-low potential (-0.4 V vs. Ag/AgNO3) and preventing the overoxidation of products in conventional electrochemical synthesis. This synergistic catalysis strategy exhibits good functional group tolerance and wide substrate scope on both aryl halides and amines, by which some important natural products and pharmaceutical chemicals have been successfully modified.

Discrimination of Xylene Isomers by Precisely Tuning the Interlayer Spacing of Reduced Graphene Oxide Membrane.

Separating xylene isomers is a challenging task due to their similar physical and chemical properties. In this study, we developed a molecular sieve incorporating a reduced graphene oxide (rGO) membrane for the precise differentiation of xylene isomers. We fabricated GO membranes using a vacuum filtration technique followed by thermal-induced reduction to produce rGO membranes with precisely controllable interlayer spacing. Notably, we could finely tune the interlayer spacing of the rGO membrane from 8.0 to 5.0 Å by simply varying the thermal reduction temperature. We investigated the reverse osmosis separation ability of the rGO membranes for xylene isomers and found that the rGO membrane with an interlayer spacing of 6.1 Å showed a high single component permeance of 0.17 and 0.04 L m-2 h-1 bar-1 for para- and ortho-xylene, respectively, exhibiting clear permselectivity. The separation factor reached 3.4 and 2.8 when 90:10 and 50:50 feed mixtures were used, respectively, with permeance 1 order of magnitude higher than that of current state-of-the-art reverse osmosis membranes. Additionally, the membrane showed negligible permeance and selectivity decay even after continuous operation for more than 5 days, suggesting commendable membrane resistance to solvent swelling and operating pressure.

Customized Photoelectrochemical C-N and C-P Formation Enabled by Tailored Deposition on Photoanodes.

Photoelectrochemistry (PEC) is burgeoning as an innovative solution to organic synthesis. However, the current PEC system suffers limited reaction types and unsatisfactory performances. Herein, we employ efficient BiVO4 photoanode with tailored deposition layers for customizing two PEC approaches toward C-N and C-P formation. Notably, our process proceeds under mild reaction conditions, easily available substrates, and ultra-low potentials. Beyond photocatalysis and electrocatalysis, customized PEC offers high efficiency, good functional group tolerance, and substantial applicability for decorating drug molecules, highlighting its promising potential to enrich the synthetic toolbox for broader organic chemistry of practical applications.

Carbon dots encapsulated zeolitic imidazolate framework-8 as an enhanced multi-antioxidant for efficient cytoprotection to HK-2 cells.

Excessive reactive oxygen species (ROS) can lead to the imbalance of antioxidant system in the body and cause oxidative damage to cells. It is imperative to rationally design nanomaterials with high catalytic activity and multiple antioxidant activities. Here, line peppers-derived carbon dots (CDs) is encapsulated into zeolitic imidazolate framework-8 (CDs@ZIF-8) to achieve enhanced antioxidant activities for improved protective effect on cells. This nanosystem has a broad spectrum of antioxidant properties, which can effectively remove a variety of intracellular ROS and protect cells from ROS-induced death and cytoskeleton damage. In addition, CDs@ZIF-8 can reduce malondialdehyde (MDA) level and increase the enzyme activities of superoxide dismutase (SOD) and glutathione peroxidase (GPx), as well as the level of glutathione (GSH) in human kidney proximal tubular epithelial cells (HK-2) cells. Mechanism studies demonstrated that CDs@ZIF-8 can up-regulate the expression of nuclear factor erythroid 2-related factor 2 (Nrf2) and heme oxygenase-1 (HO-1), allowing the regulation of antioxidant enzymes to further achieve antioxidant effect. Besides, CDs@ZIF-8 inhibited the secretion of proinflammatory cytokines. This work demonstrates that the constructed CDs@ZIF-8 with multi-antioxidant activity can act as a highly efficient intracellular ROS scavenger and provide potential for the application in related oxidative stress-induced diseases.

Enabling long-distance hydrogen spillover in nonreducible metal-organic frameworks for catalytic reaction.

Hydrogen spillover is an extraordinary effect in heterogeneous catalysis and hydrogen storage, which refers to the surface migration of metal particle-activated hydrogen atoms over the solid supports. Historical studies on this phenomenon have mostly been limited to reducible metal oxides where the long-distance proton-electron coupled migration mechanism has been established, yet the key question remains on how to surmount short-distance and defect-dependent hydrogen migration on nonreducible supports. By demerging hydrogen migration and hydrogenation reaction, here we demonstrate that the hydrogen spillover in nonreducible metal-organic frameworks (MOFs) can be finely modulated by the ligand functional groups or embedded water molecules, enabling significant long-distance (exceed 50 nm) movement of activated hydrogen. Furthermore, using sandwich nanostructured MOFs@Pt@MOFs as catalysts, we achieve highly selective hydrogenation of N-heteroarenes via controllable hydrogen spillover from Pt to MOFs-shell. We anticipate that this work will enhance the understanding of hydrogen spillover and shed light on de novo design of MOFs supported catalysts for many important reactions involving hydrogen.

Steering Photooxidation of Methane to Formic Acid over A Priori Screened Supported Catalysts.

Efficient methane photooxidation to formic acid (HCOOH) has emerged as a sustainable approach to simultaneously generate value-added chemicals and harness renewable energy. However, the persistent challenge lies in achieving a high yield and selectivity for HCOOH formation, primarily due to the complexities associated with modulating intermediate conversion and desorption after methane activation. In this study, we employ first-principles calculations as a comprehensive guiding tool and discover that by precisely controlling the O2 activation process on noble metal cocatalysts and the adsorption strength of carbon-containing intermediates on metal oxide supports, one can finely tune the selectivity of methane photooxidation products. Specifically, a bifunctional catalyst comprising Pd nanoparticles and monoclinic WO3 (Pd/WO3) would possess optimal O2 activation kinetics and an intermediate oxidation/desorption barrier, thereby promoting HCOOH formation. As evidenced by experiments, the Pd/WO3 catalyst achieves an exceptional HCOOH yield of 4.67 mmol gcat-1 h-1 with a high selectivity of 62% under full-spectrum light irradiation at room temperature using molecular O2. Notably, these results significantly outperform the state-of-the-art photocatalytic systems operated under identical condition.

Collective chiroptical activity through the interplay of excitonic and charge-transfer effects in localized plasmonic fields.

The collective light-matter interaction of chiral supramolecular aggregates or molecular ensembles with confined light fields remains a mystery beyond the current theoretical description. Here, we programmably and accurately build models of chiral plasmonic complexes, aiming to uncover the entangled effects of excitonic correlations, intra- and intermolecular charge transfer, and localized surface plasmon resonances. The intricate interplay of multiple chirality origins has proven to be strongly dependent on the site-specificity of chiral molecules on plasmonic nanoparticle surfaces spanning the nanometer to sub-nanometer scale. This dependence is manifested as a distinct circular dichroism response that varies in spectral asymmetry/splitting, signal intensity, and internal ratio of intensity. The inhomogeneity of the surface-localized plasmonic field is revealed to affect excitonic and charge-transfer mixed intermolecular couplings, which are inherent to chirality generation and amplification. Our findings contribute to the development of hybrid classical-quantum theoretical frameworks and the harnessing of spin-charge transport for emergent applications.

Electrifying oxidation of ethylene and propylene.

Ethylene and propylene, as essential precursors in the chemical industry, have been playing a pivotal role in the production of various value-added chemicals that find wide applications in diverse sectors, such as polymer synthesis, lithium-ion battery electrolytes, antifreeze agents and pharmaceuticals. Nevertheless, traditional methods for olefin functionalization including chlorohydrination and epoxidation involve energy-intensive steps and environment-detrimental by-products. In contrast, electrocatalysis is emerging as a promising and sustainable approach for olefin oxidation via utilizing renewable electricity. Recent advancements in energy storage and conversion technologies have intensified the research efforts toward designing efficient electrocatalysts for the selective oxidation of ethylene and propylene, highlighting the shift towards more sustainable production methods. Herein, we summarize recent progress in the electrocatalytic oxidation of ethylene and propylene, focusing on achievement in catalyst design, reaction system selection and mechanism exploration. We figure out the advantages of different oxidation methods for improved performance and discuss the various types of catalysts like noble metals, non-noble metals, metal oxides and carbon-based materials, in facilitating the electrochemical oxidation of ethylene and propylene. Finally, we also provide an overview of current challenges and problems requiring further works.

Insight into selectivity of photocatalytic methane oxidation to formaldehyde on tungsten trioxide.

Tungsten trioxide (WO3) has been recognized as the most promising photocatalyst for highly selective oxidation of methane (CH4) to formaldehyde (HCHO), but the origin of catalytic activity and the reaction manner remain controversial. Here, we take {001} and {110} facets dominated WO3 as the model photocatalysts. Distinctly, {001} facet can readily achieve 100% selectivity of HCHO via the active site mechanism whereas {110} facet hardly guarantees a high selectivity of HCHO along with many intermediate products via the radical way. In situ diffuse reflectance infrared Fourier transform spectroscopy, electron paramagnetic resonance and theoretical calculations confirm that the competitive chemical adsorption between CH4 and H2O and the different CH4 activation routes on WO3 surface are responsible for diverse CH4 oxidation pathways. The microscopic mechanism elucidation provides the guidance for designing high performance photocatalysts for selective CH4 oxidation.

Nanocavity in hollow sandwiched catalysts as substrate regulator for boosting hydrodeoxygenation of biomass-derived carbonyl compounds.

Hydrodeoxygenation of oxygen-rich molecules toward hydrocarbons is attractive yet challenging in the sustainable biomass upgrading. The typical supported metal catalysts often display unstable catalytic performances owing to the migration and aggregation of metal nanoparticles (NPs) into large sizes under harsh conditions. Here, we develop a crystal growth and post-synthetic etching method to construct hollow chromium terephthalate MIL-101 (named as HoMIL-101) with one layer of sandwiched Ru NPs as robust catalysts. Impressively, HoMIL-101@Ru@MIL-101 exhibits the excellent activity and stability for hydrodeoxygenation of biomass-derived levulinic acid to gamma-valerolactone under 50°C and 1-megapascal H2, and its activity is about six times of solid sandwich counterparts, outperforming the state-of-the-art heterogeneous catalysts. Control experiments and theoretical simulation clearly indicate that the enrichment of levulinic acid and H2 by nanocavity as substrate regulator enables self-regulating the backwash of both substrates toward Ru NPs sandwiched in MIL-101 shells for promoting reaction with respect to solid counterparts, thus leading to the substantially enhanced performance.

Oxygen Radical Coupling on Short-Range Ordered Ru Atom Arrays Enables Exceptional Activity and Stability for Acidic Water Oxidation.

The discovery of efficient and stable electrocatalysts for oxygen evolution reaction (OER) in acid is vital for the commercialization of the proton-exchange membrane water electrolyzer. In this work, we demonstrate that short-range Ru atom arrays with near-ideal Ru-Ru interatomic distances and a unique Ru-O hybridization state can trigger direct O*-O* radical coupling to form an intermediate O*-O*-Ru configuration during acidic OER without generating OOH* species. Further, the Ru atom arrays suppress the participation of lattice oxygen in the OER and the dissolution of active Ru. Benefiting from these advantages, the as-designed Ru array-Co3O4 electrocatalyst breaks the activity/stability trade-off that plagues RuO2-based electrocatalysts, delivering an excellent OER overpotential of only 160 mV at 10 mA cm-2 in 0.5 M H2SO4 and outstanding durability during 1500 h operation, representing one of the best acid-stable OER electrocatalysts reported to date. 18O-labeled operando spectroscopic measurements together with theoretical investigations revealed that the short-range Ru atom arrays switched on an oxide path mechanism (OPM) during the OER. Our work not only guides the design of improved acidic OER catalysts but also encourages the pursuit of short-range metal atom array-based electrocatalysts for other electrocatalytic reactions.

Induced Huge Optical Activity in Nanoplatelet Superlattice.

Chiral superstructures with unique chiroptical properties that are not inherent in the individual units are essential in applications such as 3D displays, spintronic devices, biomedical sensors, and beyond. Generally, chiral superstructures are obtained by tedious procedures exploring various physical and chemical forces to break spatial symmetry during the self-assembly of discrete nanoparticles. In contrast, we herein present a simple and efficient approach to chiral superstructures by intercalating small chiral molecules into preformed achiral superstructures. As a model system, the chiral CdSe nanoplatelet (NPL) superlattice exhibits a giant and tunable optical activity with the highest g-factor reaching 3.09 × 10-2 to the excitonic transition of the NPL superlattice, nearly 2 orders of magnitude higher than that of the corresponding separated chiral NPLs. The theoretical analysis reveals that the chiral deformation in the NPL superlattice induced by the chiral perturbation of the small chiral molecules is critical to the observed huge optical activity. We anticipate that this research lays a foundation for understanding and applying chiral inorganic nanosystems.

Ultrastrong Graphene Sheets Assembled with Nanoconfined Water.

Highly ordered assembly of two-dimensional (2D) nanoplatelets plays a key role in enhancing the mechanical properties of layered nanocomposites. Layer-by-layer (LbL) assembly, vacuum-assisted filtration, and blade coating have been used to fabricate layered nanocomposites. However, the intrinsic wrinkles of 2D nanoplatelets and defects derived from assembling approaches make it difficult to align 2D nanoplatelets. Recently, the team of Prof. Qunfeng Cheng at Beihang University and their collaborator, Prof. Ray H. Baughman at the University of Texas at Dallas developed a novel approach for aligning graphene and Ti3C2Tx MXene nanoplatelets by nanoconfined assembly through continuous vacuum-assisted filtration. The resultant MXene-bridged sheet has ultrastrong mechanical properties and low porosity, providing a new concept for assembling 2D nanoplatelets into aligned and compact high-performance layered nanocomposites.

Review of Vision-Based Environmental Perception for Lower-Limb Exoskeleton Robots.

The exoskeleton robot is a wearable electromechanical device inspired by animal exoskeletons. It combines technologies such as sensing, control, information, and mobile computing, enhancing human physical abilities and assisting in rehabilitation training. In recent years, with the development of visual sensors and deep learning, the environmental perception of exoskeletons has drawn widespread attention in the industry. Environmental perception can provide exoskeletons with a certain level of autonomous perception and decision-making ability, enhance their stability and safety in complex environments, and improve the human-machine-environment interaction loop. This paper provides a review of environmental perception and its related technologies of lower-limb exoskeleton robots. First, we briefly introduce the visual sensors and control system. Second, we analyze and summarize the key technologies of environmental perception, including related datasets, detection of critical terrains, and environment-oriented adaptive gait planning. Finally, we analyze the current factors limiting the development of exoskeleton environmental perception and propose future directions.

Boosting Osmotic Energy Harvesting from Organic Solutions by Ultrathin Covalent Organic Framework Membranes.

Extracting osmotic energy from waste organic solutions via reverse electrodialysis represents a promising approach to reuse such industrial wastes and helps to mitigate the ever-growing energy needs. Herein, a molecularly thin membrane of covalent organic frameworks is engineered via interfacial polymerization to investigate its ion transport behavior in organic solutions. Interestingly, a significant deviation from linearity between ion conductance and reciprocal viscosity is observed, attributed to the nanoscale confinement effect on intermolecular interactions. This finding suggests a potential strategy to modulate the influence of apprarent viscosity on transmembrane transport. The osmotic energy harvesting of the ultrathin membrane in organic systems was studied, achieving an unprecedented output power density of over 84.5 W m-2 at a 1000-fold salinity gradient with a benign conversion efficiency and excellent stability. These findings provide a meaningful stepping stone for future studies seeking to fully leverage the potentials of organic systems in energy harvesting applications.

Metal-Organic Framework-Based Hetero-Phase Nanostructure Photocatalysts with Molecular-Scale Tunable Energy Levels.

As an effective method to modulate the physicochemical properties of materials, crystal phase engineering, especially hetero-phase, plays an important role in developing high-performance photocatalysts. However, it is still a huge challenge but significant to construct porous hetero-phase nanostructures with adjustable band structures. As a kind of unique porous crystalline materials, metal-organic frameworks (MOFs) might be the appropriate candidate, but the MOF-based hetero-phase is rarely reported. Herein, we developed a secondary building unit (SBU) regulating strategy to prepare two crystal phases of Ti-MOFs constructed by titanium and 1,4-dicarboxybenzene, i.e., COK and MIL-125. Besides, COK/MIL-125 hetero-phase was further constructed. In the photocatalytic hydrogen evolution reaction, COK/MIL-125 possessed the highest H2 yield compared to COK and MIL-125, ascribing to the Z-Scheme homojunction at hetero-phase interface. Furthermore, by decorating with amino groups (i.e., NH2-COK/NH2-MIL-125), the light absorbing capacity was broadened to visible-light region, and the visible-light-driven H2 yield was greatly improved. Briefly, the MOF-based hetero-phase possesses periodic channel structures and molecularly adjustable band structures, which is scarce in traditional organic or inorganic materials. As a proof of concept, our work not only highlights the development of MOF-based hetero-phase nanostructures, but also paves a novel avenue for designing high-performance photocatalysts.

Best Practices for Experiments and Reports in Photocatalytic Methane Conversion.

Efficiently converting methane into valuable chemicals via photocatalysis under mild condition represents a sustainable route to energy storage and value-added manufacture. Despite continued interest in this area, the achievements have been overshadowed by the absence of standardized protocols for conducting photocatalytic methane oxidation experiments as well as evaluating the corresponding performance. In this review, we present a structured solution aimed at addressing these challenges. Firstly, we introduce the norms underlying reactor design and outline various configurations in the gas-solid and gas-solid-liquid reaction systems. This discussion helps choosing the suitable reactors for methane conversion experiments. Subsequently, we offer a comprehensive step-by-step protocol applicable to diverse methane-conversion reactions. Emphasizing meticulous verification and accurate quantification of the products, this protocol highlights the significance of mitigating contamination sources and selecting appropriate detection methods. Lastly, we propose the standardized performance metrics crucial for evaluating photocatalytic methane conversion. By defining these metrics, the community could obtain the consensus of assessing the performance across different studies. Moving forward, the future of photocatalytic methane conversion necessitates further refinement of stringent experimental standards and evaluation criteria. Moreover, development of scalable reactor is essential to facilitate the transition from laboratory proof-of-concept to potentially industrial production.

Effect of Facet on Local Electron Density of Oxygen Vacancy in Catalysts for Nitrogen Electro-Reduction.

Oxygen-vacancy (Ov) engineering is an effective strategy to manipulate the electronic configuration of catalysts for electrochemical nitrogen reduction reaction (eNRR). The influence of the stable facet on the electronic configuration of Ov is widely studied, however, the effect of the reactive facet on the local electron density of Ov is unveiled. In this work, an eNRR electrode R(111)-TiO2/HGO is provided with a high proportion exposed reactive facet (111) of rutile-TiO2 (denoted as R(111)-TiO2) nanocrystals with Ov anchored in hierarchically porous graphite oxide (HGO) nanofilms. The R(111)-TiO2/HGO exhibits excellent eNRR performance with an NH3 yield rate of 20.68 µg h-1 cm-2, which is ≈20 times the control electrode with the most stable facet (110) exposed (R(110)-TiO2/HGO). The experimental data and theoretical simulations reveal that the crystal facet (111) has a positive effect on regulating the local electron density around the oxygen vacancy and the two adjacent Ti-sites, promoting the π-back-donation, minimizing the eNRR barrier, and transforming the rate determination step to *NNH→*NNHH. This work illuminates the effect of crystal facet on the performance of eNRR, and offers a novel strategy to design efficient eNRR catalysts.

Flexible Full-Inorganic Ultrathin Films with Stable Circularly Polarized Luminescence Covering the Visible to Near-Infrared Region.

Circularly polarized luminescence (CPL) materials hold significant value in various fields, including information storage, secure communication, three-dimensional displays, biological detection, and optoelectronic devices. Using the Langmuir-Schaeffer (LS) assembly technique, we successfully construct a series of large-area flexible optical ultrathin films. Impressively, the inorganic assembled ultrathin films exhibit excellent CPL optical activity covering the visible to near-infrared (NIR) region, with the luminescence asymmetry factor glum ranging from 0.59 to 0.72. Moreover, such ultrathin films also display outstanding mechanical flexibility, the optical activity of which even after 240 bending cycles shows almost no difference compared to the unbent samples. Owing to the ultra-broadband optical activity and ultra-stable optical activity of such full-inorganic assembled materials on flexible substrates, coupled with their excellent processability and outstanding mechanical flexibility, we anticipate they will find use in many fields such as communication technology and flexible optoelectronics.