RESUMEN
In this paper, an inductive wireless link for motion recognition is investigated. In order to validate the feasibility of a wearable implementation, the use of three different materials is analyzed: a thin copper wire, a conductive yarn, and a conductive non-woven fabric. Results from the application of the developed devices on an arm are reported and discussed. It is demonstrated that the proposed textile inductive resonant wireless links are well suited for developing a compact wearable system for joint flexion recognition.
RESUMEN
In this paper, wristband electrodes for hand-to-hand bioimpedance measurements are investigated. The proposed electrodes consist of a stretchable conductive knitted fabric. Different implementations have been developed and compared with Ag/AgCl commercial electrodes. Hand-to-hand measurements at 50 kHz on forty healthy subjects have been carried out and the Passing-Bablok regression method has been exploited to compare the proposed textile electrodes with commercial ones. It is demonstrated that the proposed designs guarantee reliable measurements and easy and comfortable use, thus representing an excellent solution for the development of a wearable bioimpedance measurement system.
Asunto(s)
Textiles , Extremidad Superior , Humanos , Electrodos , Conductividad Eléctrica , ManoRESUMEN
One of the major goals of Health 4.0 is to offer personalized care to patients, also through real-time, remote monitoring of their biomedical parameters. In this regard, wearable monitoring systems are crucial to deliver continuous appropriate care. For some biomedical parameters, there are a number of well established systems that offer adequate solutions for real-time, continuous patient monitoring. On the other hand, monitoring skin hydration still remains a challenging task. The continuous monitoring of this physiological parameter is extremely important in several contexts, for example for athletes, sick people, workers in hostile environments or for the elderly. State-of-the-art systems, however, exhibit some limitations, especially related with the possibility of continuous, real-time monitoring. Starting from these considerations, in this work, the feasibility of an innovative time-domain reflectometry (TDR)-based wearable, skin hydration sensing system for real-time, continuous monitoring of skin hydration level was investigated. The applicability of the proposed system was demonstrated, first, through experimental tests on reference substances, then, directly on human skin. The obtained results demonstrate the TDR technique and the proposed system holds unexplored potential for the aforementioned purposes.
Asunto(s)
Piel , Dispositivos Electrónicos Vestibles , Anciano , Estudios de Factibilidad , Humanos , Monitoreo Fisiológico , Agua/análisisRESUMEN
Radio frequency identification (RFID) is one of the crucial enabling technologies for the Internet of Things (IoT). This is leading to a continuous augmentation of RFID technologies, in terms of sensing capabilities, energetic autonomy, usability, and cost affordability, and this special issue proposes an overview on such a challenging scenario. The proposed results, in terms of cost reduction, miniaturization, and compatibility with complex systems and technologies, as well as the identification of the relevant criticalities, also pave the way to future steps being taken that go beyond the current IoT.
RESUMEN
BACKGROUND: Parasites of the family Spirorchiidae cause disease and mortality in marine and freshwater turtles; two species, Hapalotrema mistroides and Neospirorchis sp., are reported in the resident population of loggerhead turtles of the Mediterranean Sea, with the first being the most widespread. In vivo diagnosis of spirorchidiasis can represent a challenge in guaranteeing prompt control and treatment of the disease and is currently limited to copromicroscopy. The aim of this study was the development of a real time PCR assay with TaqMan probe for the detection of H. mistroides infection in the blood of live loggerhead turtles, Caretta caretta, hospitalized in rehabilitation centres. Its potential use for in vivo diagnosis is explored. RESULTS: The developed real time PCR successfully detected H. mistroides DNA from both positive controls and experimental blood samples of live loggerhead sea turtles, showing good specificity, sensitivity and good reaction efficiency. Two out of three turtles which had demonstrated positivity at copromicroscopy also tested positive to this blood assay; DNA of H. mistroides was detected within the blood of one sea turtle, which tested negative for copromicroscopy. CONCLUSIONS: This study describes a specific and rapid molecular assay to detect H. mistroides infection from live sea turtles and highlights for the first time the presence of DNA of this species in turtle blood samples. Since this assay is able to detect low amounts of the parasitic free DNA in blood samples, its application could be helpful for in vivo diagnosis of H. mistroides infection as well as for epidemiological purposes.
Asunto(s)
Reacción en Cadena en Tiempo Real de la Polimerasa/veterinaria , Infecciones por Trematodos/veterinaria , Tortugas/parasitología , Animales , ADN de Helmintos/aislamiento & purificación , Heces/parasitología , Mar Mediterráneo , Proyectos Piloto , Reacción en Cadena en Tiempo Real de la Polimerasa/métodos , Sensibilidad y Especificidad , Trematodos/genética , Trematodos/aislamiento & purificación , Infecciones por Trematodos/diagnóstico , Tortugas/sangreRESUMEN
In this work, two fully-textile wearable devices, to be used as chipless identification tags in identification and tracking applications are presented. For the fabrication of the fully-textile tags, a layer of fleece was used as a substrate, while an adhesive non-woven conductive fabric was employed for the conductive parts. To allow radio-frequency identification of these chipless tags, two alternative techniques were used. One relies on associating a binary code with the resonance frequency of resonant devices: the presence/absence of the resonance peaks in the transmission scattering parameter, | S 21 | , of a set of resonators is used to encode a string of bits. The second technique for accomplishing radio-frequency identification of the chipless tags resorts to a frequency-shift coding technique, which is implemented by modifying the configuration of a hairpin resonator. The obtained numerical and experimental results confirm the suitability of the proposed strategies for obtaining entirely-textile, wearable chipless tags for identification and tracking purposes, which can be particularly useful, especially in the industrial sector. In this field, in fact, the proposed solutions would guarantee a seamless integration with clothes and would facilitate the user's interaction with the IoT infrastructure. In this regard, one of the envisaged application scenarios related to the tracking of hides in the leather industry is also presented.
RESUMEN
In this paper, a frequency-signature Radio-Frequency Identification (RFID) chipless tag for wearable applications is presented. The results achieved for a fully-textile solution guaranteeing a seamless integration in clothes are reported and discussed. The proposed tag consists of two planar monopole antennas and a 50 Ω microstrip line loaded with multiple resonators. In order to achieve a compact size, the resonators are slotted on the ground plane of the microstrip line. As for the antennas, the same geometry was exploited for both the TX and the RX tag antenna. In particular, it consists of a proximity fed planar monopole on a ground plane. The selected geometry guarantees easy integration with the multi-resonator structure. Numerical and experimental data referring to a 2-bit implementation are presented and discussed. For fabricating all the prototypes, a layer of pile was used as a substrate, while an adhesive non-woven conductive fabric was exploited for the fabrication of the conductive parts. Experimental tests demonstrate that although the performance of the final device strongly depends on the properties of the used materials and on the imperfections of the fabrication process, the proposed frequency-signature RFID chipless tag is suitable for wearable applications, such as anti-counterfeiting systems and laundry labels.
RESUMEN
We show that assembled domains of magnetic iron-oxide nanoparticles (IONPs) are effective at increasing the dielectric permittivity of polydimethylsiloxane (PDMS) nanocomposites in the GHz frequency range. The assembly has been achieved by means of magnetophoretic transport and its efficacy, as well as the electromagnetic properties of the nanocomposite, has been found to depend on IONPs diameter. Remarkably, the dielectric permittivity increase has been obtained by keeping dielectric and magnetic losses very low, making us envision the suitability of nanocomposites based on aligned IONPs as substrates for radiofrequency applications.
Asunto(s)
Compuestos Férricos/química , Nanopartículas/química , Nanotecnología/instrumentación , Polímeros/química , Nanocompuestos/química , Tamaño de la PartículaRESUMEN
Radio Frequency Identification (RFID) technology is playing a crucial role for item-level tracing systems in healthcare scenarios. The pharmaceutical supply chain is a fascinating application context, where RFID can guarantee transparency in the drug flow, supporting both suppliers and consumers against the growing counterfeiting problem. In such a context, the choice of the most adequate RFID tag, in terms of shape, frequency, size and reading range, is crucial. The potential presence of items containing materials hostile to the electromagnetic propagation exasperates the problem. In addition, the peculiarities of the different RFID-based checkpoints make even more stringent the requirements for the tag. In this work, the performance of several commercial UHF RFID tags in each step of the pharmaceutical supply chain has been evaluated, confirming the expected criticality. On such basis, a guideline for the electromagnetic design of new high-performance tags capable to overcome such criticalities has been defined. Finally, driven by such guidelines, a new enhanced tag has been designed, realized and tested. Due to patent pending issues, the antenna shape is not shown. Nevertheless, the optimal obtained results do not lose their validity. Indeed, on the one hand they demonstrate that high performance item level tracing systems can actually be implemented also in critical operating conditions. On the other hand, they encourage the tag designer to follow the identified guidelines so to realize enhanced UHF tags.
Asunto(s)
Microondas , Preparaciones Farmacéuticas/provisión & distribución , Dispositivo de Identificación por Radiofrecuencia , Administración de Materiales de Hospital/organización & administraciónRESUMEN
Along with the growing of the aging population and the necessity of efficient wellness systems, there is a mounting demand for new technological solutions able to support remote and proactive healthcare. An answer to this need could be provided by the joint use of the emerging Radio Frequency Identification (RFID) technologies and advanced software choices. This paper presents a proposal for a context-aware infrastructure for ubiquitous and pervasive monitoring of heterogeneous healthcare-related scenarios, fed by RFID-based wireless sensors nodes. The software framework is based on a general purpose architecture exploiting three key implementation choices: ontology representation, multi-agent paradigm and rule-based logic. From the hardware point of view, the sensing and gathering of context-data is demanded to a new Enhanced RFID Sensor-Tag. This new device, de facto, makes possible the easy integration between RFID and generic sensors, guaranteeing flexibility and preserving the benefits in terms of simplicity of use and low cost of UHF RFID technology. The system is very efficient and versatile and its customization to new scenarios requires a very reduced effort, substantially limited to the update/extension of the ontology codification. Its effectiveness is demonstrated by reporting both customization effort and performance results obtained from validation in two different healthcare monitoring contexts.
Asunto(s)
Dispositivo de Identificación por Radiofrecuencia/organización & administración , Tecnología de Sensores Remotos/métodos , Integración de Sistemas , Benchmarking , Eficiencia Organizacional , Humanos , Microondas , Tecnología de Sensores Remotos/instrumentación , Diseño de SoftwareRESUMEN
Due to the increasing interest in millimeter waves (MMW) applications in medicine and telecommunications, the investigation of their potential biological effects is of utmost importance. Here we report results of the study of interaction between low-intensity radiation at 53.37 GHz and giant vesicles. Direct optical observations of vesicles subjected to irradiation enabled the monitoring in real time of the response of vesicles. Physical changes of vesicles, i.e. elongation, induced diffusion of fluorescent dye di-8-ANEPPS, and increased attractions between vesicles are demonstrated. These effects are reversible and occur only during irradiation with a "switch on" of the effect requiring a short time. Since the average temperature change was very small the effects could not be attributed to thermal mechanisms. We assume that the interaction of MMW with lipid membrane leads to changes at the membrane-water interface, where charged and dipolar residues are located.
Asunto(s)
Microondas , Fosfolípidos/efectos de la radiación , Liposomas Unilamelares/efectos de la radiación , Fosfolípidos/química , Liposomas Unilamelares/químicaRESUMEN
The finite difference time domain method (FDTD) is frequently used for the numerical solution of a wide variety of electromagnetic (EM) problems and, among them, those concerning human exposure to EM fields. In many practical cases related to the assessment of occupational EM exposure, large simulation domains are modeled and high space resolution adopted, so that strong memory and central processing unit power requirements have to be satisfied. To better afford the computational effort, the use of parallel computing is a winning approach; alternatively, subgridding techniques are often implemented. However, the simultaneous use of subgridding schemes and parallel algorithms is very new. In this paper, an easy-to-implement and highly-efficient parallel graded-mesh (GM) FDTD scheme is proposed and applied to human-antenna interaction problems, demonstrating its appropriateness in dealing with complex occupational tasks and showing its capability to guarantee the advantages of a traditional subgridding technique without affecting the parallel FDTD performance.