Patterns and associated factors of shisha usage among the undergraduate students of Jouf University, Saudi Arabia: A cross-sectional study.

INTRODUCTION: Shisha tobacco use is gaining popularity around the world, especially among young people and college students. Shisha users are exposed to many of the same harmful substances as cigarette smokers but at much higher levels, which could have more serious adverse health impacts. The aims of this study were to: 1) determine the patterns of shisha smoking among university students in the Northern Province of Saudi Arabia; 2) identify the reasons for using shisha tobacco; and 3) ascertain whether usage of shisha smoking differs by their sociodemographic characteristics. METHODS: A cross-sectional survey was conducted among students of seven different colleges at a public university between October and December 2022. A modified version of the Global Youth Tobacco Survey questionnaire was used to collect information specifically on shisha smoking. After adjusting for confounding variables, a logistic regression analysis was used to determine the related factors. RESULTS: A total of 418 participants were included in the study. Of the studied population, shisha smoking was seen in 73.7% (n=308). Out of 308 shisha smokers, 208 (67.5%) had their first session of shisha smoking within the past two years; 34.4% of participants had used it in the past 30 days (current users), of which 27.4% had smoked shisha from 1 to 7 days during the past 30 days. The majority of respondents (63.6%) reported having friends that smoke. The most popular flavor among respondents (24.6%) was apple. For quitting attempts, 46.4% reported a 24-hour quit attempt in the previous year. Stress (23.0%) was reported as the main reason for beginning shisha use. Shisha smoking was significantly associated with age (Ref. 18-20 years; 24-26 years, AOR=0.08; 95% CI: 0.02-0.33, p<0.001; ≥27 years, AOR=0.12; 95% CI: 0.02-0.62, p=0.01), living status (Ref. alone; with family, AOR=0.23; 95% CI: 0.11-0.47, p<0.001; with friends, AOR=0.36; 95% CI: 0.18-0.76, p<0.001), with parents having higher education level (Ref. primary school and lower; Bachelor's, AOR=0.33; 95% CI: 0.14-0.76, p<0.001; diploma, AOR=0.33; 95% CI: 0.15-0.73, p<0.001; PhD, AOR=5.15; 95% CI: 1.00-9.65, p=0.05). CONCLUSIONS: Shisha use was more frequent among Saudi Arabian college students, especially those who were aged 18-20 years, living alone, and having highly educated parents.

Alveolar Ridge Augmentation Assessment Using a Minimalistic Approach, with and without Low-Level Laser Therapy (LLLT)-A Comparative Clinical Trial.

Background and Objective: A narrow alveolar ridge is an obstacle to optimal rehabilitation of the dentition. There are several complex and invasive techniques to counter the ridge augmentation dilemma, with most of them exhibiting low feasibility. Hence, this randomized clinical trial aims to evaluate the effectiveness of a Minimalistic Ridge Augmentation (MRA) technique, in conjunction with low-level laser therapy (LLLT). Materials and Methods: A total of 20 patients (n = 20) were selected, with 10 assigned to the test group (MRA+LLLT) and the other 10 to the control group (MRA). A vertical incision of approximately 10 mm was placed mesial to the defect and tunneled to create a subperiosteal pouch across the entire width of the defect. At the test sites, a diode laser (AnARC FoxTM Surgical Laser 810 nm) was used to deliver LLLT (parameters: 100 mW, with a maximum energy distribution of 6 J/cm2 in the continuous wave mode for 60 s per point) to the exposed bone surface inside the pouch, followed by graft (G-Graft, SurgiwearTM, Shahjahanpur, India) deposition with a bone graft carrier. The control sites were not irradiated with a laser. Results: A horizontal ridge width gain of >2 mm was observed in both groups. The changes in bone density for the test and control groups were -136 ± 236.08 HU and -44.30 ± 180.89 HU, respectively. Furthermore, there was no statistically significant difference between the test and control groups in these parameters. Conclusion: The study findings reveal that the MRA technique is relatively simple and feasible for alveolar ridge augmentation. The role of LLLT in the process requires further elucidation.

Antibacterial Efficacy and Surface Characteristics of Boron Nitride Coated Dental Implant: An In-Vitro Study.

This in vitro study evaluated bacterial cell proliferation and biofilm adhesion on titanium discs with and without antibacterial surface treatment to reduce the chances of peri-implant infections. Hexagonal boron nitride with 99.5% purity was converted to hexagonal boron nitride nanosheets via the liquid phase exfoliation process. The spin coating method was used for uniform coating of h-BNNSs over titanium alloy (Ti6Al4V) discs. Two groups of titanium discs were formed: Group I (n = 10) BN-coated titanium discs and Group II (n = 10) uncoated titanium discs. Two bacterial strains, Streptococcus mutans (initial colonizers) and Fusobacterium nucleatum (secondary colonizers), were used. A zone of inhibition test, microbial colony forming units assay, and crystal violet staining assay were used to evaluate bacterial cell viability. Surface characteristics and antimicrobial efficacy were examined by scanning electron microscopy with energy dispersion X-ray spectroscopy. SPSS (Statistical Package for Social Sciences) version 21.0 was used to analyze the results. The data were analyzed for probability distribution using the Kolmogorov-Smirnov test, and a non-parametric test of significance was applied. An inter-group comparison was done using the Mann-Whitney U test. A statistically significant increase was observed in the bactericidal action of BN-coated discs compared to uncoated discs against S. mutans, but no statistically significant difference was found against F. nucleatum.

Roots and Root Canals Characterization of Permanent Mandibular Premolars Analyzed Using the Cone Beam and Micro Computed Tomography-A Systematic Review and Metanalysis.

This current paper aims to review the literature on the root canal configuration (RCC) and root structure of permanent mandibular premolars. To find the published scientific literature on the RCC of mandibular premolars up to July 2022, a systematic search of four electronic databases was performed. The studies were selected, rendering to a predetermined point of reference: "mandibular 2nd premolar", "root and canal system", "morphology of root and canal", "root and canal configuration", and "morphology", along with "anatomy" and "mandibular premolars". Cross-referencing along with screening through the bibliographies of the chosen articles resulted in the identification of further studies. In the current study, we examined 30 different articles, and we chose them based on the quality of research investigations. From 3471 retrieved studies, a total of 15981 mandibular 2nd premolars were observed in 30 studies. The mean JBI score for studies assessing the structure of the root, as well as the root canal of the mandibular 2nd premolar, was 7.78 ± 0.81. We have found a pooled prevalence of 91.82% for Vertucci class I root canal morphology and 78.63% pooled prevalence of single-rooted mandibular second premolar. A total of 8677 mandibular 1st premolars were observed in 22 studies. The mean JBI score for studies assessing the structure and anatomy of the root, as well as root canal of mandibular 1st premolar, was 7. 95 ± 0.85. We have found a pooled prevalence of 74.34% for Vertucci class I root canal morphology and 85.20% pooled prevalence of single-rooted mandibular 1st premolar. Mandibular first and second premolars were mostly single-rooted teeth (89.5-100%). The most frequently seen RCC is a 1-1-2-/2 (type V-Vertucci's), followed by 1-1-2-/1 (type IV- Vertucci's; type III-Weine's), and finally RCC 2-2-2-1 (type IV-Vertucci's; type III-Weine's). Presently, the imaging of CBCT is the most used research approach for studying Mn2Ps' structural characteristics.

Comparison of complete denture fabricated by two different border molding materials, in terms of patients' satisfaction.

BACKGROUND: Restoration of dentition leads to an improvement in the oral health related quality of life. Complete dentures are used to restore this oral cavity disability to its original condition. This study was designed to compare satisfaction levels between two groups of edentulous patients for whom two different border moulding techniques: 'conventional green stick' and 'polyvinyl siloxane material' were employed. METHODS: This was a cross-sectional questionnaire based study. A questionnaire was designed in the Department of Prosthodontics at the Armed Forces Institute of Dentistry to compare the satisfaction levels between two groups by assessing the following four variables: 'retention', 'stability', 'comfort during final impression procedure' and 'time taken by the procedure'. RESULTS: No significant differences were found between the two groups for 'retention', 'stability' and 'comfort during the final impression procedure' (p > 0.05). For 'stability' there was a significant difference between the two groups. However, as the difference was only that of one patient (31 patients having 'good stability' in Group A, as compared to 32 in Group B); the difference was not considered significant. The conventional border moulding technique took significantly more time as compared to the modified polyvinyl siloxane technique (p < 0.05).The mean satisfaction score was low (7.36 +/- 0.45). There was a significant difference in the patient satisfaction scores between the modified and the conventional border moulding techniques (p > 0.05). CONCLUSION: Although a significant difference was found between the patient satisfaction levels between the two groups, the clinical significance of these results is still in question as the only factor found to be different between the two groups was the 'time taken'.