RESUMEN
BACKGROUND: Homicide followed by suicide is rare, devastating and perpetrated worldwide. It is commonly assumed that the perpetrator had a mental disorder, raising concomitant questions about prevention. Though events have been reported, there has been no previous systematic review of the mental health of perpetrators. AIMS: Our aims were twofold. First, to identify whether there are recognisable subgroups of homicide-suicides in published literature and, secondly, to investigate the relationship between perpetrator mental state and aspects of the incident. METHODS: We conducted a systematic review of published literature on studies of homicide followed within 24 h by suicide or serious suicide attempt that included measures of perpetrator mental state. RESULTS: Sixty studies were identified, most from North America or Europe. Methodologically, studies were too heterogeneous for meta-analysis. They fell into three main groups: family, mass shooter, and terrorist with an additional small mixed group. There was evidence of mental illness in a minority of perpetrators; its absence in the remainder was only partially evidenced. There was no clear association between any specific mental illness and homicide-suicide type, although depression was most cited. Social role disjunction, motive, substance misuse and relevant risk or threat behaviours were themes identified across all groups. Pre-established ideology was relevant in the mass shooter and terrorism groups. Prior trauma history was notable in the terrorist group. CONCLUSION: Research data were necessarily collected post-incident and in most cases without a standardised approach, so findings must be interpreted cautiously. Nevertheless, they suggest at least some preventive role for mental health professionals. Those presenting to services with depression, suicidal ideation, relationship difficulties and actual, or perceived, changes in social position or role would merit detailed, supportive assessment over time.
Asunto(s)
Homicidio , Suicidio , Humanos , Homicidio/psicología , Homicidio/estadística & datos numéricos , Suicidio/estadística & datos numéricos , Suicidio/psicología , Trastornos Mentales/epidemiología , Trastornos Mentales/psicología , Criminales/psicología , Criminales/estadística & datos numéricos , Intento de Suicidio/estadística & datos numéricos , Intento de Suicidio/psicología , Terrorismo/psicologíaRESUMEN
Oxygen-tolerant, aqueous copper-mediated polymerization approaches are combined with click chemistry in either a sequential or a simultaneous manner, to enable the synthesis of multifunctional protein-polymer conjugates. Propargyl acrylate (PgA) and propargyl methacrylate (PgMA) grafting from a bovine serum albumin (BSA) macroinitiator is thoroughly optimized to synthesize chemically addressable BSA-poly(propargyl acrylate) and BSA-poly(propargyl methacrylate) respectively. The produced multifunctional bioconjugates bear pendant terminal 1-alkynes which can be readily post-functionalized via both [3+2] Huisgen cycloaddition and thiol-yne click chemistry under mild reaction conditions. Simultaneous oxygen-tolerant, aqueous copper-catalyzed polymerization, and click chemistry mediate the in situ multiple chemical tailoring of biomacromolecules in excellent yields.
Asunto(s)
Química Clic , Cobre , Cobre/química , Polimerizacion , Polímeros/química , Albúmina Sérica Bovina , Acrilatos , Metacrilatos , Alquinos/química , Azidas/química , Reacción de CicloadiciónRESUMEN
We present synthetic experiments of lactic acid (LA) polycondensation to produce poly(lactic acid) (PLA) as well as kinetic modeling calculations that capture the polymer molecular weight increase with time, given the initial concentrations. Tin-octoate-catalyzed polycondensation of (D,L)- or L-lactic acid was carried out in pre-dried toluene after azeotropic dehydration for 48-120 h at 130-137 °C. The polymerization was optimized by varying lactic acid and catalyst concentrations as well as the temperature. Gel permeation chromatography was used to experimentally follow the evolution of molecular weights and the products were characterized by NMR, TGA, DSC and IR. Under optimal conditions, PLLA with weight-average molecular weight (Mw) of 161 kDa could be obtained. The rate equations that describe polycondensation kinetics were recast in a condensed form that allowed very fast numerical solution and calculation of the number-average molecular weight with time. Deviations with respect to the experiment were minimized in a least-squares fashion to determine rate constants. The optimized kinetics parameters are shown to reproduce the experimental data accurately.
RESUMEN
Background: The most common complications related to the closure of abdominal wall incisions are surgical site infections, wound dehiscence and the development of an incisional hernia. Several factors relating to the surgical technique and the materials used have been identified and analysed over the years, as mirrored in the current recommendations of the European Hernia Society, but some misconceptions still remain that hinder wide implementation. Method: A literature search was performed in the PubMed and GoogleScholar databases on 15 July 2021 and additionally on 30 March 2022 to include recent updates. The goal was to describe the scientific background behind the optimal strategies for reducing incisional hernia risk after closure of abdominal wall incisions in a narrative style review. Results: An aponeurosis alone, small bites/small steps continuous suture technique should be used, using a slowly resorbable USP 2/0 or alternatively USP 0 suture loaded in a small ½ circle needle. The fascial edges should be properly visualised and tension should be moderate. Conclusion: Despite the reproducibility, low risk and effectiveness in reducing wound complications following abdominal wall incisions, utilisation of the recommendation of the guidelines of the European Hernia Society remain relatively limited. More work is needed to clear misconceptions and disseminate the established knowledge and technique especially to younger surgeons.
RESUMEN
The synthesis of protein-polymer conjugates usually requires extensive and costly deoxygenation procedures, thus limiting their availability and potential applications. In this work, we report the ultrafast synthesis of polymer-protein bioconjugates in the absence of any external deoxygenation via an aqueous copper-mediated methodology. Within 10 min and in the absence of any external stimulus such as light (which may limit the monomer scope and/or disrupt the secondary structure of the protein), a range of hydrophobic and hydrophilic monomers could be successfully grafted from a BSA macroinitiator, yielding well-defined polymer-protein bioconjugates at quantitative yields. Our approach is compatible with a wide range of monomer classes such as (meth) acrylates, styrene, and acrylamides as well as multiple macroinitiators including BSA, BSA nanoparticles, and beta-galactosidase from Aspergillus oryzae. Notably, the synthesis of challenging protein-polymer-polymer triblock copolymers was also demonstrated, thus significantly expanding the scope of our strategy. Importantly, both lower and higher scale polymerizations (from 0.2 to 35 mL) were possible without compromising the overall efficiency and the final yields. This simple methodology paves the way for a plethora of applications in aqueous solutions without the need of external stimuli or tedious deoxygenation.
Asunto(s)
Cobre , Polímeros , Acrilamidas/química , Acrilatos/química , Cobre/química , Oxígeno , Polimerizacion , Polímeros/química , Proteínas/química , Estireno/química , Agua/química , beta-GalactosidasaRESUMEN
PURPOSE OF REVIEW: The surgical management of enteroatmospheric fistula (EAF) in patients with intestinal failure represents a major challenge for a surgical team and requires proficiency in sepsis management, nutritional support and prehabilitation, beside expertise in visceral and abdominal wall surgery. This review provides an update on the current recommendations and evidence. RECENT FINDINGS: Reconstructive surgery should be performed at a minimum of 6-12 months after last laparotomy. Isolation techniques and new occlusion devices may accelerate spontaneous EAF closure in selected cases. Chyme reinfusion supports enteral and parenteral nutrition. Stapler anastomosis and failure to close the fascia increase the risk of EAF recurrence. Posterior component separation, intraoperative fascial tension and biological meshes may be used to accommodate fascial closure. SUMMARY: Timing of reconstructive surgery and previous optimal conservative treatment is vital for favorable outcomes. Wound conditions, nutritional support and general patient status should be optimal before attempting a definitive fistula takedown. Single stage procedures with autologous gut reconstruction and abdominal wall reconstruction can be complex but well tolerated.
Asunto(s)
Hernia Ventral , Insuficiencia Intestinal , Fístula Intestinal , Músculos Abdominales , Humanos , Fístula Intestinal/etiología , Fístula Intestinal/cirugía , Nutrición Parenteral , Resultado del TratamientoRESUMEN
Background: Open abdomen treatment (OAT) is widely accepted to manage severe abdominal conditions such as peritonitis and abdominal compartment syndrome but can be associated with high morbidity and mortality. The main risks in OAT are (1) entero-atmospheric fistula (EAF), (2) failure of primary fascial closure, and (3) incisional hernias. In this study, we assessed the long-term functional outcome after OAT to understand which factors impacted most on quality of life (QoL)/daily living activities and the natural course after OAT. Materials and Methods: After a retrospective analysis of 165 consecutive OAT patients over a period of 10 years (2002-2012) with over 65 clinical parameters that had been performed at our center (1), we initiated a prospective structured follow-up approach. All survivors were invited for a clinical follow-up. Forty complete datasets including clinical and social follow-up with SF-36 scores were available for full analysis. Results: The patients were dominantly male (75%) with a median age of 52 years. Primary fascial closure (PC) was achieved in 9/40 (23%), while in 77% a planned ventral hernia (PVH) approach was followed. A total of 3/4 of the PVH patients underwent a secondary-stage abdominal wall reconstruction (SSR), but 2/3 of these reconstructed patients developed recurrent hernias. Fifty-five percent of the patients with PC developed an incisional hernia, while 20% of all patients developed significant scarring (Vancouver Scar Score >8). Scar pain was described by 15% of the patients as "moderate" [Visual Analog Scale (VAS) 4-6] and by 10% as "severe" (VAS > 7). While hernia presence, PC or PVH, and scarring showed no impact on QoL, male sex and especially EAF formation significantly reduced QoL. Discussion: Despite many advantages, OAT was associated with relevant mortality and morbidity, especially in the early era before the implementation of a structured concept at our center. Follow-up revealed that hernia incidence after OAT and secondary reconstruction were high and that 25% of patients qualifying for a secondary reconstruction either did not want surgery or were unfit. Sex and EAF formation impacted significantly on QoL, which was lower than in the general population. With regard to hernia incidence, new strategies such as prophylactic mesh implantation upon fascial closure should be discussed analogous to other major abdominal procedures.
RESUMEN
The immense application potential of amphiphilic protein-polymer conjugates remains largely unexplored, as established "grafting from" synthetic protocols involve time-consuming, harsh and disruptive deoxygenation methods, while "grafting to" approaches result in low yields. Here we report an oxygen tolerant, photoinduced CRP approach which readily affords quantitative yields of protein-polymer conjugates within 2 h, avoiding damage to the secondary structure of the protein and providing easily accessible means to produce biomacromolecular assemblies. Importantly, our methodology is compatible with multiple proteins (e.g. BSA, HSA, GOx, beta-galactosidase) and monomer classes including acrylates, methacrylates, styrenics and acrylamides. The polymerizations are conveniently conducted in plastic syringes and in the absence of any additives or external deoxygenation procedures using low-organic content media and ppm levels of copper. The robustness of the protocol is further exemplified by its implementation under UV, blue light or even sunlight irradiation as well as in buffer, nanopure, tap or even sea water.
Asunto(s)
Oxígeno/química , Polimerizacion , Polímeros/síntesis química , Proteínas/química , Especies Reactivas de Oxígeno/química , Acrilamidas/química , Acrilatos/química , Cobre/química , Ferritinas , Luz , Metacrilatos/química , Modelos Moleculares , Consumo de Oxígeno , Albúmina Sérica Bovina/químicaRESUMEN
An efficient and green method for the α-hydroxylation of substituted ketones has been developed. This method includes the in situ conversion of various ketones into the corresponding silyl enol ethers and their oxidation to the corresponding α-hydroxy ketones. Two protocols have been established leading either to protected α-hydroxy carbonyls or free α-hydroxy ketones. Both procedures are easy to follow and lead to good to high yields for a variety of ketones.
RESUMEN
A cheap, green, and highly efficient one-pot method for the synthesis of O-protected allylic alcohols is described. By utilizing 2,2,2-trifluoroacetophenone as the organocatalyst and H2 O2 as the oxidant, a variety of allylic amine N-oxides were synthesized, which upon heating are converted to the final products through a [2,3]-Meisenheimer rearrangement.