A unifying approach to drug-in-polymer solubility prediction: Streamlining experimental workflow and analysis.

This method paper describes currently used experimental methods to predict the drug-in-polymer solubility of amorphous solid dispersions and offers a combined approach for applying the Melting-point-depression method, the Recrystallization method, and the Melting-and-mixing method. It aims to describe and expand on the theoretical basis as well as the analytical methodology of the recently published Melting-and-mixing method. This solubility method relies on determining the relationship between drug loads and the enthalpy of melting and mixing of a crystalline drug in the presence of an amorphous polymer. This relationship is used to determine the soluble drug load of an amorphous solid dispersion from the recorded enthalpy of melting and mixing of the crystalline drug portion in a drug-polymer sample at equilibrium solubility. Due to the complex analytical methodology of the Melting-and-mixing method, a software solution called the Glass Solution Companion app was developed. Using this new tool, it is possible to calculate the predicted drug-in-polymer solubility and Flory-Huggins interaction parameter from experimental samples, as well as to generate the resulting solubility-temperature curve. This software can be used for calculations for all three experimental methods, which would be useful for comparing the applicability of the methods on a given drug-polymer system. Since it is difficult to predict the suitability of these drug-in-polymer solubility methods for a specific drug-polymer system in silico, some experimental investigation is necessary. By optimizing the experimental protocol, it is possible to collect data for the three experimental methods simultaneously for a specific drug-polymer system. These results can then be readily analyzed using the Glass Solution Companion app to find the most appropriate method for the drug-polymer system, and therefore, the most reliable drug-in-polymer solubility prediction.

Co-release of paclitaxel and encequidar from amorphous solid dispersions increase oral paclitaxel bioavailability in rats.

The oral bioavailability of paclitaxel is limited due to low solubility and high affinity for the P-glycoprotein (P-gp) efflux transporter. Here we hypothesized that maximizing the intestinal paclitaxel levels through apparent solubility enhancement and controlling thesimultaneous release of both paclitaxel and the P-gp inhibitor encequidar from amorphous solid dispersions (ASDs) would increase the oral bioavailability of paclitaxel. ASDs of paclitaxel and encequidar in polyvinylpyrrolidone K30 (PVP-K30), hydroxypropylmethylcellulose 5 (HPMC-5), and hydroxypropylmethylcellulose 4 K (HPMC-4K) were hence prepared by freeze-drying. In vitro dissolution studies showed that both compounds were released fastest from PVP-K30, then from HPMC-5, and slowest from HPMC-4K ASDs. The dissolution of paclitaxel from all polymers resulted in stable concentration levels above the apparent solubility. The pharmacokinetics of paclitaxel after oral administration to male Sprague-Dawley rats was investigated with or without 1 mg/kg encequidar, as amorphous solids or polymer-based ASDs. The bioavailability of paclitaxel increased 3- to 4-fold when administered as polymer-based ASDs relative to solid amorphous paclitaxel. However, when amorphous paclitaxel was co-administered with encequidar, either as an amorphous powder or as a polymer-based ASD, the bioavailability increased 2- to 4-fold, respectively. Interestingly, a noticeable increase in paclitaxel bioavailability of 24-fold was observed when paclitaxel and encequidar were co-administered as HPMC-5-based ASDs. We, therefore, suggest that controlling the dissolution rate of paclitaxel and encequidar in order to obtain simultaneous and timed release from polymer-based ASDs is a strategy to increase oral paclitaxel bioavailability.

Towards personalized drug delivery via semi-solid extrusion: Exploring poly(vinyl alcohol-co-vinyl acetate) copolymers for hydrochlorothiazide-loaded films.

The increasing need for personalized drug delivery requires developing systems with tailorable properties. The copolymer poly(vinyl alcohol-co-vinyl acetate) (PVA/PVAc) allows for adjusting the monomer ratio. This study explored the effect of vinyl alcohol (VA) and vinyl acetate (VAc) monomer ratio on the properties of hydrochlorothiazide (HCT) films. Five copolymers with different VA/VAc ratios were selected and characterized. Semi-solid extrusion was employed as a method for the preparation of HCT-PVA/PVAc films to address the challenges of HCT´s low water solubility, high melting point, and low permeability. All copolymers were suitable for semi-solid extrusion, however, the mechanical properties of films with higher VA proportions were more suitable. The drug was found to be homogeneously distributed on a micrometer level throughout the prepared films. It was found that using different monomer ratios in the copolymer allows for drug release tuning - higher VA proportions showed an increased rate of drug release. Experiments through HT29-MTX cell monolayers revealed differences in HCT permeability between the different formulations. In addition, no cytotoxicity was observed for the tested formulations. The results highlight the effect of monomer ratio on film properties, providing valuable guidance for formulators in selecting PVA/PVAc copolymers for achieving desired high-quality films. In addition, varying the monomer ratio allows tuning of the film properties, and can be applied for personalization, with flexible-dose adjustment and design of appealing shapes of the pharmaceutics, not least attractive for pediatric drug delivery.

Impact of drug load and polymer molecular weight on the 3D microstructure of printed tablets.

This study investigates the influence of drug load and polymer molecular weight on the structure of tablets three-dimensionally (3D) printed from the binary mixture of prednisolone and hydroxypropyl methylcellulose (HPMC). Three different HPMC grades, (AFFINISOLTM HPMC HME 15LV, 90 Da (HPMC 15LV); 100LV, 180 Da (HPMC 100LV); 4M, 500 Da (HPMC 4M)), which are suitable for hot-melt extrusion (HME), were used in this study. HME was used to fabricate feedstock material, i.e., filaments, at the lowest possible extrusion temperature. Filaments of the three HPMC grades were prepared to contain 2.5, 5, 10 and 20 % (w/w) prednisolone. The thermal degradation of the filaments was studied with thermogravimetric analysis, while solid-state properties of the drug-loaded filaments were assessed with the use of X-ray powder diffraction. Prednisolone in the freshly extruded filaments was determined to be amorphous for drug loads up to 10%. It remained physically stable for at least 6 months of storage, except for the filament containing 10% drug with HPMC 15LV, where recrystallization of prednisolone was detected. Fused deposition modeling was utilized to print honeycomb-shaped tablets from the HME filaments of HPMC 15LV and 100LV. The structural characteristics of the tablets were evaluated using X-ray microcomputed tomography, specifically porosity and size of structural elements were investigated. The tablets printed from HPMC 15LV possessed in general lower total porosity and pores of smaller size than tablets printed from the HPMC 100LV. The studied drug loads were shown to have minor effect on the total porosity of the tablets, though the lower the drug load was, the higher the variance of porosity along the height of the tablet was observed. It was found that tablets printed with HPMC 15LV showed higher structural similarity with the virtually designed model than tablets printed from HPMC 100LV. These findings highlight the relevance of the drug load and polymer molecular weight on the microstructure and structural properties of 3D printed tablets.

Shifting the Focus from Dissolution to Permeation: Introducing the Meso-fluidic Chip for Permeability Assessment (MCPA).

In response to the growing ethical and environmental concerns associated with animal testing, numerous in vitro tools of varying complexity and biorelevance have been developed and adopted in pharmaceutical research and development. In this work, we present one of these tools, i.e., the Meso-fluidic Chip for Permeability Assessment (MCPA), for the first time. The MCPA combines an artificial barrier (PermeaPad®) with an organ-on-chip device (MIVO®) and real-time automated concentration measurements, to yield a sustainable, yet effortless method for permeation testing. The system offers three major physiological aspects, i.e., a biomimetic membrane, an optimal membrane interfacial area-to-donor-volume-ratio (A/V) and a physiological flow on the acceptor/basolateral side, which makes the MPCA an ideal candidate for mechanistic studies and excellent in vivo bioavailability predictions. We validated the method with a handful of assorted drug compounds in unstirred and stirred donor conditions, before exploring its applicability as a tool for dissolution/permeation testing on a BCS class III/I drug (pyrazinamide) crystalline adducts and BCS class II/IV (hydrocortisone) amorphous solid dispersions. The results were highly reproducible and clearly displayed the method's potential for evaluating the performance of enabling formulations, and possibly even predicting in vivo performance. We believe that, upon further development, the MCPA will serve as a useful in vitro tool that could push sustainability into pharmaceutics by refining, reducing and replacing animal testing in early-stage drug development.

Increased bioavailability of a P-gp substrate: Co-release of etoposide and zosuquidar from amorphous solid dispersions.

P-glycoprotein (P-gp) inhibitors, like zosuquidar, partly increase oral bioavailability of P-gp substrates, such as etoposide. Here, it was hypothesised that co-release of etoposide and zosuquidar from amorphous solid dispersions (ASDs) may further increase oral etoposide bioavailability. This was envisioned through simultaneous co-release and subsequent spatiotemporal association of etoposide and zosuquidar in the small intestinal lumen. To further achieve this, ASDs of etoposide and zosuquidar in polyvinylpyrrolidone (PVP), hydroxypropylmethyl cellulose (HPMC) 5, and HPMC 4 k were prepared by freeze-drying. From these ASDs, etoposide release was fastest from PVP, then HPMC 5 and slowest from HPMC 4. Release from PVP and HPMC5 resulted in stable supersaturations of etoposide. In transcellular permeability studies across MDCKII-MDR1 cell monolayers, the accumulated amount of etoposide increased 3.7-4.9-fold from amorphous etoposide or when incorporated into PVP- or HPMC 5-based ASDs, compared to crystalline etoposide. In vivo, the oral bioavailability in Sprague Dawley rats increased from 1.0 to 2.4-3.4 %, when etoposide was administered as amorphous drug or in ASDs. However, when etoposide and zosuquidar were co-administered, the oral bioavailability increased further to 8.2-18 %. Interestingly, a distinct increase in oral etoposide bioavailability to 26 % was observed when etoposide and zosuquidar were co-administration in HPMC5-based ASDs. The supersaturation of etoposide as well as the simultaneous co-release of etoposide and zosuquidar in the small intestinal lumen may explain the observed bioavailability increase. Overall, this study suggested that simultaneous co-release of an amorphous P-gp substrate and inhibitor may be a novel and viable formulation strategy to increase the bioavailability P-gp substrates.

Co-administration of Intravenous Drugs: Rapidly Troubleshooting the Solid Form Composition of a Precipitate in a Multi-drug Mixture Using On-Site Raman Spectroscopy.

Intravenous drugs are often co-administrated in the same intravenous catheter line due to which compatibility issues, such as complex precipitation processes in the catheter line, may occur. A well-known example that led to several neonatal deaths is the precipitation due to co-administration of ceftriaxone- and calcium-containing solutions. The current study is exploring the applicability of Raman spectroscopy for testing intravenous drug compatibility in hospital settings. The precipitation of ceftriaxone calcium was used as a model system and explored in several multi-drug mixtures containing both structurally similar and clinically relevant drugs for co-infusion. Equal molar concentrations of solutions containing ceftriaxone and calcium chloride dihydrate were mixed with solutions of cefotaxime, ampicillin, paracetamol, and metoclopramide. The precipitate formed was collected as an "unknown" material, dried, and analyzed. Several solid-state analytical methods, including X-ray powder diffraction, Raman spectroscopy, and thermogravimetric analysis, were used to characterize the precipitate. Raman microscopy was used to investigate the identity of single sub-visual particles precipitated from a mixture of ceftriaxone, cefotaxime, and calcium chloride. X-ray powder diffraction suggested that the precipitate was partially crystalline; however, the identity of the solid form of the precipitate could not be confirmed with this standard method. Raman spectroscopy combined with multi-variate analyses (principal component analysis and soft independent modelling class analogy) enabled the correct detection and identification of the precipitate as ceftriaxone calcium. Raman microscopy enabled the identification of ceftriaxone calcium single particles of sub-visual size (around 25 µm), which is in the size range that may occlude capillaries. This study indicates that Raman spectroscopy is a promising approach for supporting clinical decisions and especially for compatibility assessments of drug infusions in hospital settings.

Exploring a case of incompatibility in a complex regimen containing Plasma-Lyte 148 in the pediatric intensive care.

BACKGROUND: In the local pediatric intensive care unit, precipitation was observed in the intravenous catheter upon co-administration of four drugs together with the buffered electrolyte solution (Plasma-Lyte 148, Baxter). Co-infusion of incompatible combinations represents a safety concern. AIMS: To reproduce the clinical case of precipitation. To further explore and understand the risk of precipitation, different combinations of the components as well as the corresponding electrolyte solution with 5% glucose (Plasma-Lyte 148 with 5% glucose) should be investigated. METHODS: Physical compatibility of fentanyl, ketamine, midazolam, and potassium chloride was tested in combination with the buffered electrolyte solutions. The concentrations and infusion rates representative of children 10-40 kg were used to estimate mixing ratios. Analyses detecting visual particles (Tyndall beam) and sub-visual particles (light obscuration technology) were undertaken. Measured turbidity and pH in mixed samples were compared with unmixed controls. RESULTS: Both midazolam and ketamine showed formation of visual and sub-visual particles upon mixing with Plasma-Lyte 148, respectively. Particle formation was confirmed by increased turbidity and a distinct Tyndall effect. pH in mixed samples mirrored the pH of the buffered electrolyte, suggesting that the solubility limits of midazolam, and in some ratios also ketamine, were exceeded. Midazolam also precipitated in combination with the glucose-containing product that held a lower pH, more favorable for keeping midazolam dissolved. CONCLUSIONS: Replication of the case revealed that both midazolam and ketamine contributed to the precipitation. Midazolam and ketamine were both evaluated as incompatible with the buffered electrolyte solution and midazolam also with the buffered electrolyte-glucose solution and should not be co-administered in the same i.v.-catheter line. Fentanyl and potassium chloride were interpreted as compatible with both buffered electrolytes.

Water-soluble chitosan eases development of mucoadhesive buccal films and wafers for children.

Oromucosal films and wafers are user-friendly solid dosage forms offering easy and convenient administration, as well as rapid or controlled drug delivery. The aim of this study was to develop prednisolone containing child-friendly chitosan-based mucoadhesive films and wafers with a prolonged residence time on the buccal mucosa. Four different chitosan types (different molecular weights, degree of deacetylation (DDA), pattern of deacetylation) were studied for films prepared by solvent-cast-evaporation and wafers by freeze-drying. Mucoadhesive properties correlated with swelling abilities and were dependent on the chitosan type, the solvent, and the preparation method. Mucoadhesive forces were higher for formulations containing chitosan with higher DDA and for wafers compared to films. The drug release was relatively fast, especially for films (approx. 90 % in 15 minutes) and steadier for wafers (90 % in 45-120 minutes). Permeability was evaluated using artificial membranes and HT29-MTX cell-monolayers. The developed formulations exhibited good biocompatibility. Organoleptic properties can be improved by choosing a homogenously deacetylated chitosan type that provides a more neutral pH. Using hydroxypropyl-beta-cyclodextrin-complexation for taste masking of bitter drugs also reduced wafers' drug release rate. Mucoadhesive wafers are promising alternatives to films with a slower drug release rate and stronger mucoadhesion.

A new method to determine drug-polymer solubility through enthalpy of melting and mixing.

In this study, a new method to determine the solubility of crystalline drugs in (amorphous) polymers is proposed. The method utilizes annealing of supersaturated amorphous solid dispersions to achieve equilibrium between dissolved and recrystallized drug. By measuring the enthalpy of melting and mixing (Hm+mix) of the recrystallized drug, the equilibrium solubility of the drug in the polymer at the annealing temperature is determined. The equilibrium solubilities at these elevated temperatures were used to extrapolate to room temperature using the Flory-Huggins model. The new Hm+mix method showed solubility predictions in line with the melting point depression (MPD) and recrystallization (RC) methods for indomethacin (IMC) -polyvinylpyrrolidone (PVP). For IMC-hydroxypropyl methylcellulose (HPMC), the MPD method plateaued rapidly, leaving only one usable data point. The RC method showed large variations in the solubility predictions possibly due to a narrow glass transition temperature (Tg) window or inaccurate Tg determination. In contrast, the new Hm+mix method showed robust solubility prediction over the entire annealing temperature range with low variation and narrow error margins after extrapolation for both drug-polymer systems. The new Hm+mix method was able to accurately determine the drug-polymer solubility of IMC-HPMC, showing promise as a new tool to determine the solubility of problematic drug-polymer systems.

Frequently acquired drugs in neonatal intensive care and their physical compatibility.

AIM: Incompatibility of intravenous drugs is dangerous and therefore undesirable. The aim of this study was to identify the most commonly acquired intravenous drugs in five neonatal intensive care units and test these for compatibility. METHODS: The most frequently acquired drugs in five key hospitals in the South-Eastern district of Norway for 2019 and 2020 served as a proxy for the prevalence of use. Representatives were selected from the three most prevalent groups based on the Anatomical Therapeutic Chemical classification system. Co-administration of drug pairs was simulated using clinically relevant concentrations and infusion rates representing mixing ratios in the catheter. Particle formation was assessed by particle counting and size measurement, by visual examination using Tyndall beam, by turbidity and by measuring pH of mixed samples. RESULTS: The most frequently acquired drug groups were anti-infectives, neurological agents and cardiovascular drugs. Compatibility testing revealed that both ampicillin and benzylpenicillin were incompatible with morphine. Flecainide and fluconazole showed no signs of incompatibility with morphine. No information on these combinations in a neonatal-relevant setting is available. CONCLUSION: We recommend to abstain from co-administering ampicillin and benzylpenicillin with morphine in neonatal intensive settings. Morphine co-administered with flecainide and fluconazole in neonatal patients were evaluated as safe.

Co-administration of drugs with parenteral nutrition in the neonatal intensive care unit-physical compatibility between three components.

There is a lack of compatibility data for intravenous therapy to neonatal intensive care unit (NICU) patients, and the purpose of this study was to contribute with documented physical compatibility data to ensure safe co-administration. We selected Numeta G13E, the 3-in-1 parenteral nutrition (PN) used at our NICU, together with the frequently used drugs morphine, dopamine and cefotaxime in two- but also three-component combinations. Incompatibility may lead to particle formation (precipitation) and oil-droplet growth (emulsion destabilisation), both which are undesirable and pose a safety risk to already unstable patients. We assessed potential particle formation of three mixing ratios for each combination (always including 1 + 1 ratio) using light obscuration, turbidity and pH measurements combined with visual inspection by focused Tyndall beam. Potential droplet-growth and emulsion destabilisation was assessed by estimating PFAT5 from droplet size measurements and counts, mean droplet diameter and polydispersity index from dynamic light scattering, and pH measurements. Mixed samples were always compared to unmixed controls to capture changes as a result of mixing and samples were analysed directly after mixing and after 4 h to simulate long contact time. None of the samples showed any sign of precipitation, neither in the drug-drug nor in the two- or three-component mixture with PN. Neither did we detect any form of emulsion destabilisation. CONCLUSION: Dopamine, morphine and cefotaxime were found to be compatible with NumetaG13E, and it is safe to co-administer these drugs together with this PN in NICU patients. WHAT IS KNOWN: • The need for co-administration of drugs and complex PN admixtures occurs frequently in NICU due to limited venous access. • Available compatibility data are scarce and for combinations of more than two components non-existent. WHAT IS NEW: • Here we report physical compatibility data of two- as well as three-component combinations of frequently used NICU drugs and a 3-in-1 PN admixture. • Co-administration of Numeta G13E with dopamine and morphine, but also with morphine and cefotaxime is safe in NICU.

Influence of Drug Load on the Printability and Solid-State Properties of 3D-Printed Naproxen-Based Amorphous Solid Dispersion.

Fused deposition modelling-based 3D printing of pharmaceutical products is facing challenges like brittleness and printability of the drug-loaded hot-melt extruded filament feedstock and stabilization of the solid-state form of the drug in the final product. The aim of this study was to investigate the influence of the drug load on printability and physical stability. The poor glass former naproxen (NAP) was hot-melt extruded with Kollidon® VA 64 at 10-30% w/w drug load. The extrudates (filaments) were characterised using differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and thermogravimetric analysis (TGA). It was confirmed that an amorphous solid dispersion was formed. A temperature profile was developed based on the results from TGA, DSC, and DMA and temperatures used for 3D printing were selected from the profile. The 3D-printed tablets were characterised using DSC, X-ray computer microtomography (XµCT), and X-ray powder diffraction (XRPD). From the DSC and XRPD analysis, it was found that the drug in the 3D-printed tablets (20 and 30% NAP) was amorphous and remained amorphous after 23 weeks of storage (room temperature (RT), 37% relative humidity (RH)). This shows that adjusting the drug ratio can modulate the brittleness and improve printability without compromising the physical stability of the amorphous solid dispersion.

Polymers in pharmaceutical additive manufacturing: A balancing act between printability and product performance.

Materials and manufacturing processes share a common purpose of enabling the pharmaceutical product to perform as intended. This review on the role of polymeric materials in additive manufacturing of oral dosage forms, focuses on the interface between the polymer and key stages of the additive manufacturing process, which determine printability. By systematically clarifying and comparing polymer functional roles and properties for a variety of AM technologies, together with current and emerging techniques to characterize these properties, suggestions are provided to stimulate the use of readily available and sometimes underutilized pharmaceutical polymers in additive manufacturing. We point to emerging characterization techniques and digital tools, which can be harnessed to manage existing trade-offs between the role of polymers in printer compatibility versus product performance. In a rapidly evolving technological space, this serves to trigger the continued development of 3D printers to suit a broader variety of polymers for widespread applications of pharmaceutical additive manufacturing.

Inorganic Nanocarriers for Encapsulation of Natural Antimicrobial Compounds for Potential Food Packaging Application: A Comparative Study.

Design and development of novel inorganic nanocarriers for encapsulation of natural antimicrobial substances for food packaging applications have received great interest during the last years. Natural nanoclays are the most investigated nanocarriers and recently interest has also grown in the synthetically produced porous silica particles. However, these different carrier matrices have not been compared in terms of their loading capability and subsequent release. In this study, the feasibility of porous silica particles (with different pore structures and/or surface functionalities) and commercially available nanoclays were evaluated as encapsulation matrices. Two well-studied antimicrobial substances, thymol and curcumin, were chosen as volatile and non-volatile model compounds, respectively. The encapsulation efficiency, and the subsequent dispersibility and release, of these substances differed significantly among the nanocarriers. Encapsulation of the volatile compound highly depends on the inner surface area, i.e., the protective pore environment, and an optimal nanocarrier can protect the encapsulated thymol from volatilization. For the non-volatile compound, only the release rate and dispersibility are affected by the pore structure. Further, water-activated release of the volatile compound was demonstrated and exhibited good antimicrobial efficacy in the vapor phase against Staphylococcus aureus. This comparative study can provide a base for selecting the right nanocarrier aimed at a specific food packaging application. No nanocarrier can be considered as a universally applicable one.

Adjusting the dose in paediatric care: dispersing four different aspirin tablets and taking a proportion.

OBJECTIVES: When caring for children in a hospital setting, tablets are often manipulated at the ward to obtain the right dose. One example is manipulation of tablets containing the slightly water-soluble substance aspirin, used in paediatric care as an antiplatelet agent. The evidence base, however, for choosing certain tablet formulations and manipulation methods over others for extraction of proportions is lacking. The aim of this study was to investigate the effect of tablet formulation and manipulation technique on the dose accuracy and precision attained when dispersing different commercially available aspirin tablets and extracting a small proportion suitable for children. METHODS: The manipulation methods investigated simulated those observed in the paediatric clinic. Four tablet formulations-one chewable, one conventional and two dispersible-were dispersed in 10 mL water in a medicine measure. On (1) passive dispersion, (2) mixing by stirring with the syringe, or (3) stirring and pumping the dispersion in and out of the syringe, respectively, proportions (1 mL or 2 mL) were extracted and the doses recovered were determined using a validated UHPLC (ultra high-pressure liquid chromatography) method. RESULTS: Fractions from the four different dispersed aspirin tablet formulations varied from 99% to 3% of that intended with the lowest degree of mixing, and from 96% to 34% of that intended with the highest degree of mixing. Only the dispersible tablets gave average doses within 20% of the intended dose. CONCLUSIONS: Fraction extraction from dispersed aspirin tablets only gave doses within 20% of intended for the dispersible tablets, and then only for some of the manipulation methods: 'passive dispersion' for the 75 mg dispersible tablet and 'stirring and pumping' for the 300 mg dispersible tablet. The tablets not intended for dispersion gave unsatisfactory results, outside 20%, regardless of manipulation method. The findings underline the importance of considering both tablet formulation and dose extraction technique when manipulations are required.

Solid lipid nanoparticle-loaded mucoadhesive buccal films - Critical quality attributes and in vitro safety & efficacy.

The objective of this work was to develop and characterize solid lipid nanoparticle (SLN)-loaded mucoadhesive films to reveal their potential as successful drug formulations. SLNs based on lipid (Lipoid S100) and surfactant (polysorbate 80) were prepared using the solvent-injection method, and their properties examined using experimental designs. Further, the marker coumarin 6 (C6) was solubilized in the particles as a model for a lipophilic drug. Lipid and surfactant concentrations influenced the particle size, while C6 had minor impact. The particle size distribution was narrow and the storage stability satisfactory for 4 months (4 ℃). The incorporation of the nanoparticles into a film matrix consisting of HPMC and glycerol, increased film thickness and flexibility, and slightly decreased the mechanical strength. The mucin interaction and disintegration time of the films were unimpaired. Film uniformity was satisfactory. Solubilisation in SLNs reduced the rate and extent of permeation of C6 through a monolayer of mucus-producing HT29-MTX cells. When the particles were incorporated into the mucoadhesive film, this effect was compensated for. In conclusion, this project was a first step in the successful development of an SLN-loaded mucoadhesive film formulation and served its purpose in revealing the formulation's uniformity, mucoadhesiveness and biocompatibility.

Functionalised calcium carbonate as a coformer to stabilize amorphous drugs by mechanochemical activation.

The aim of this study was to investigate the amorphization, physical stability and drug release of a model drug, carvedilol (CAR), when loaded onto functionalised calcium carbonate (FCC) using mechanochemical activation (vibrational ball milling). The solid-state characteristics and physical stability of CAR-FCC samples, prepared at different weight ratios and for different milling times, were determined using differential scanning calorimetry and X-ray powder diffraction. Upon milling CAR-FCC samples containing 50% CAR, amorphization of CAR was observed after 10 min. For CAR-FCC samples milled for either 30 or 90 min, it was found that CAR was amorphised at all ratios (10-90% CAR), but FCC remained crystalline. The glass transition temperature (Tgα) of the various CAR-FCC samples milled for 90 min was found to be similar (38 °C) for all ratios containing 20% CAR and above. The similar Tgαs for the different drug ratios indicate deposition of amorphous CAR onto the surface of FCC. For CAR-FCC samples containing 10% CAR, a Tgα of 49 °C was found, which is 11 °C higher compared with other CAR-FCC samples. This may indicate restricted molecular mobility resulting from CAR molecules that are in close contact with the FCC surface. The physical stability, under both stress (100 °C) and non-stress conditions (25 °C at dry conditions), showed that drug concentrations up to 30% CAR can be stabilized in the amorphous form for at least 19 weeks under non-stress conditions when deposited onto FCC, compared to less than a week physical stability of neat amorphous CAR. In vitro drug release showed that CAR-FCC samples containing 60% CAR and below can improve the drug release and generate supersaturated systems compared to neat amorphous and crystalline CAR. Samples with lower drug concentrations (40% CAR and below) can maintain supersaturation during 360 min of dissolution testing. This study indicates that the crystalline inorganic material, FCC, can facilitate amorphization of drugs, provide stabilization against drug crystallization, and improve dissolution properties of amorphous drugs upon mechanochemical activation.

Y-Site Physical Compatibility of Numeta G13E with Drugs Frequently Used at Neonatal Intensive Care.

Preterm neonates require parenteral nutrition (PN) in addition to intravenous drug therapy. Due to limited venous access, drugs are often co-administered with PN via the same lumen. If incompatible, precipitation and emulsion destabilization may occur with the consequent risk of embolism and hyper-immune reactions. Information on intravenous compatibility is scarce. Our aim was to analyse the compatibility of Numeta G13E with paracetamol, vancomycin and fentanyl because of the frequency of their use. A panel of methods was chosen to assess precipitation (sub-visual particle counting, turbidity measurement, Tyndall beam effect and pH measurement) and emulsion destabilization (mean droplet diameter measurement and sub-visual counting of oil droplets, followed by estimation of PFAT5 (percentage of fat residing in globules larger than 5 µm) and pH measurement). Samples in clinically relevant mixing ratios were tested immediately and after 4 h. All samples of drugs mixed with Numeta G13E were compared to unmixed controls. None of the tested drugs precipitated in contact with Numeta G13E, and we did not see any sign of emulsion destabilization when clinically relevant mixing ratios were applied. These results are reassuring. However, when contact time exceeds the established norm, caution in the form of filter utilisation and close inspection is advised.