DOTA functionalized adsorbent DOTA@Sludge@Chitosan derived from recycled shrimp shells and sludge and its application for lead and chromium removal from water.

DOTA@Sludge@Chitosan was synthesized by a facile treatment using DOTA (1,4,7,10-tetraazacyclododecane-N,N',N,N'-tetraacetic acid) to modify dry sludge and chitosan in an acidic solution. The performance of developed DOTA@Sludge@Chitosan was investigated for the adsorptive removal of Cr6+ and Pb2+ from water. Characterization studies showed that the materials possess a large surface area (52.009 m2/g), pore volume (0.069 cm3/g), and abundant functional groups of amino and hydroxyl. The prepared material showed a synergetic effect due to carboxylic acid and sludge, effectively removing Cr6+ and Pb2+. It reached 329.4 mg/g (Pb2+) and 273.3 mg/g (Cr6+) at 20 °C, much higher than commercial activated carbon. The regeneration of the adsorbent was tested for six adsorption and desorption cycles. The results demonstrate that the DOTA@Sludge@Chitosan adsorbent well-maintained high adsorption capacity attributed to its stability, making it a promising adsorbent for heavy metals removal from industrial effluent.

Novel strategy for reusing agricultural mulch film residual by iron modification for arsenic removal in gold-smelting wastewater.

In gold-smelting wastewater after the original treatment process of flocculation and precipitation using mainly lime, a mixture of As, Cu, Pb, Mn, Zn, Al, Ni, and Fe existed with an arsenic concentration of 813.07 mg/L and other ions' concentration at ug/L levels. In this work, a new clean process of mainly adsorption with self-made adsorbent Fe-PE, which was synthesized by loading ferric lignin on agricultural mulch film residual, was investigated to purify and remove arsenic from gold-smelting wastewater. A batch of column experiments was investigated to explore the reaction behavior between wastewater and adsorbent Fe-PE. The results showed while operating the adsorption columns at a pilot scale for 68 days, the arsenic concentration in the effluent was below 0.5 mg/L, and there was no significant change in the concentration of co-existing metal ions, indicating that Fe-PE had a good selective adsorption performance for arsenic in wastewater. Furthermore, Fe-PE did not dissolve and release Fe ions in wastewater, and the whole process could not produce sludge. This work first suggested an efficient and potential application for the purification and removal of arsenic from gold-smelting wastewater with agricultural mulch film residual after chemical modification, which will provide a novel strategy for reusing the agricultural mulch film residual.

Efficient adsorption of heavy metals from wastewater on nanocomposite beads prepared by chitosan and paper sludge.

Chitosan was commonly used with inorganic salt and organic compounds to prepare adsorption material for water treatment. Different materials were mixed for the preparation, leading to a high cost for water treatment. Sludge from papermaking has abundant fiber and inorganic salt, which can reduce the addition of raw materials in preparing the adsorption material and thus lower the cost. This work used recycled industrial paper sludge to prepare adsorption material to remove heavy metals from wastewater. The adsorption properties of the prepared sludge-chitosan material for Cu2+ and Cr3+ in wastewater were investigated. The impacts of adsorption time, pH, and initial concentrations of Cu2+ and Cr3+ on adsorption amount were studied and optimized. The saturated adsorption capacity of sludge-chitosan material for Cu2+ and Cr3+ can reach 114.6 and 110.3 mg/g. The adsorption kinetics satisfied the pseudo-second-order model, indicating two modes, physical diffusion, and chem-sorption, in the heavy metal adsorption by the sludge-chitosan materials. Physical distribution has little Effect on chemical adsorption. The materials can be applied to treating Cu2+ and Cr3+ containing wastewater with the proposed cheap and readily available sludge-chitosan material. The results confirmed that sludge-chitosan material possessed good regeneration performance and was an ideal adsorbent.

Loading ferric lignin on polyethylene film and its influence on arsenic-polluted soil and growth of romaine lettuce plant.

This work developed a composite (Pe-FeLs) which loaded ferric lignin on polyethylene film (PE film) by chemical modification and physico-chemically characterized by Microscope, FESEM with elemental mapping analysis, and XRD. Microscope pictures showed that chemical modification did not destroy the appearance of PE film. The FESEM images of Pe-FeLs showed the well-distributed clusters could be clearly seen and most of the particles were spherical morphology. Elemental mapping of individual element on Pe-FeLs clearly indicated the existing of iron. The XRD pattern showed the amorphous hydroxides of iron on Pe-FeLs. In arsenic solution, the total arsenic adsorption capacity of Pe-FeLs was much higher than that of ferric lignin and PE, which showed Pe-FeLs had the ability to adsorb arsenic. For making Pe-FeLs work well in the soil, a Pe-FeLs system was set up with plastic grid plate, PE film with holes, Pe-FeLs, PE film, and plastic grid plate from the upper to bottom in order. With applying Pe-FeLs system under the soil, arsenic was significantly reduced by 25.5 ~ 53.4% in heavily, moderately, and lower arsenic-polluted soils, the biomass of the romaine lettuce increased and arsenic accumulation in the romaine lettuce decreased.

Adsorption of mercury(ii) from water by a novel sPAN fiber containing sulfhydryl, carboxyl and amino groups.

A novel fiber containing sulfhydryl, carboxyl and amino groups (sPAN) with high adsorption capacity for mercury was facilely prepared by chemically grafting cysteine onto a commercial polyacrylonitrile (PAN) fiber in a one-step reaction. The as-prepared sPAN was characterized for its chemical structure, thermal stability, tensile strength, surface morphology and surface binding species. The adsorption and desorption performances for mercury were investigated by both batch and dynamic experiments. The results showed that sPAN was effective for mercury removal over pH 4-7, and ionic strength produced no obvious interference with the adsorption. The equilibrium adsorption capacity of mercury could be as high as 459.3 (±16.0) mg g-1, much higher than for most previously reported materials due to the strong interaction between mercury ions and sulfhydryl, carboxyl, amino groups. More than 99% adsorbed mercury could be eluted by the mixture of hydrochloric acid and thiourea, and the regenerated sPAN could be reused for mercury removal with no significant loss of adsorption capacity even after 10 cycles. The dynamic adsorption results indicated that at initial mercury concentrations of 0.1 and 1.0 mg L-1, the residual mercury concentration was less than 1 µg L-1, which could meet the criterion for drinking water. Moreover, at an initial mercury concentration of 10 mg L-1, the residual mercury concentration was less than 50 µg L-1, which could satisfy the Chinese national industry water discharge standard.