[Research Progress in Diagnosis and Treatment of Acute Leukemia Complicated with Pulmonary Infection--Review].

Acute leukaemia is a group of aggressive malignancies with a high mortality rate. The reduction in functional immune cells due to the disease itself and radiotherapy/chemotherapy makes the patients susceptible to co-infections, of which pulmonary infection is a major cause of death. Early accurate diagnosis and appropriate treatment may prevent the spread of infection in patients with acute leukaemia complicated with pulmonary infection, thus reduce serious complications such as sepsis, respiratory failure and multi-organ failure. However, there are still clinical difficulties in the diagnosis and treatment of pulmonary infections in acute leukemia patients. Therefore, the current research advances in the diagnosis and treatment of bacterial, fungal and viral infections in the lungs of patients with acute leukemia were briefly summarized in this review.

Convenient two-step method constructed silicon-based microfluidic chip for fast CYP2C19 SNPs detection.

The rapid detection of single nucleotide polymorphisms (SNPs) in the CYP2C19 gene is crucial for precise clopidogrel usage. Quantitative real-time polymerase chain reaction (qPCR), as a powerful amplification tool, has been widely employed for CYP2C19 SNPs detection. However, traditional qPCR suffers from long amplification times and high reagent consumption. To address these challenges, this work presents a microfluidic SNPs detection device based on on-chip qPCR. The device includes a rapid thermal cycling system, an optical detection system, a control system, and a complementary silicon-glass chip for CYP2C19 SNPs detection. Compared to commercial qPCR instruments that take 1 hour for testing, this device completes the test in just 15 minutes (40 PCR cycles). The resulting linearity is similar to that found using commercial qPCR instruments but with higher amplification efficiency. Additionally, compared with other silicon-based qPCR chips, this chip is constructed by using a convenient two-step method and offers low manufacturing costs, which potentially reduces single-test costs to an acceptable level. This makes our chip promising for point-of-care testing (POCT).

Blue-Light-Excitable Red-Emitting Organic Antimony Halides as a Reversible Humidity Sensor.

Zero-dimensional organic antimony halides have attracted significant attention recently due to their structural variety, tunable optical properties, and high luminescence efficiency. Here, a new series of antimony bromide hybrid structures with seesaw [SbBr4] and pyramidal [SbBr5] geometries are reported with low band gaps and blue-light excited red emissions. Their luminescence is attributed to self-trapped excitons with a broadband emission of a large Stokes shift. Their photoluminescence signal is sensitive to water molecules, with a reversible positive correlation in a relative humidity range of 30-90%, enabling them as potential materials for real-time, self-consistent humidity sensors.

Study on the Erosion Resistance of Different TiN Crystal Planes by Molecular Dynamics.

In this study, we innovatively combined the Fe-Ti-N potential function file to construct simulation models of different crystal facets of TiN/Fe ((001), (110), and (111)), which had not been previously explored. Employing molecular dynamics (MD) simulations, the research investigates the microscale differences in erosion resistance and surface properties of various TiN crystal planes under continuous impacts at varying velocities and angles. The results indicate that both surface wear and internal defects of the model increase with the impact velocity. Both TiN(110) and TiN(111) exhibit damage on their surfaces and interiors, with a larger wear range. In contrast, TiN(001), due to its superior elastic recovery capability, maintains a better surface condition, showing significantly less wear compared to TiN(110) and TiN(111). This disparity in performance among different crystal planes is attributed to variations in molecular gaps between planes, bonding points within the lattice, types of forces, and modes of action. Further research revealed that the wear volume increased with the rise in impact angle, reaching its peak at 90°. Regardless of the impact angle, TiN(001) consistently outperformed TiN(110) and TiN(111). The aim of the research is to compare the surface and internal defects of different crystal facets at the microscopic level, thereby selecting superior crystal facets and providing theoretical reference for the application of TiN materials in practical fracturing environments.

Endosomal catabolism of phosphatidylinositol 4,5-bisphosphate is fundamental in building resilience against pathogens.

Endosomes are characterized by the presence of various phosphoinositides that are essential for defining the membrane properties. However, the interplay between endosomal phosphoinositides metabolism and innate immunity is yet to be fully understood. Here, our findings highlight the evolutionary continuity of RAB-10/Rab10's involvement in regulating innate immunity. Upon infection of C. elegans with P. aeruginosa, an increase in RAB-10 activity was observed in the intestine. Conversely, when RAB-10 was absent, the intestinal diacylglycerols (DAGs) decreased, and the animal's response to the pathogen was impaired. Further research revealed that UNC-16/JIP3 acts as an RAB-10 effector, facilitating the recruitment of phospholipase EGL-8 to endosomes. This leads to a decrease in endosomal PI(4,5)P2 and an elevation of DAGs, as well as the activation of the PMK-1/p38 MAPK innate immune pathway. It is noteworthy that the dimerization of UNC-16 is a prerequisite for its interaction with RAB-10(GTP) and the recruitment of EGL-8. Moreover, we ascertained that the rise in RAB-10 activity, due to infection, was attributed to the augmented expression of LET-413/Erbin, and the nuclear receptor NHR-25/NR5A1/2 was determined to be indispensable for this increase. Hence, this study illuminates the significance of endosomal PI(4,5)P2 catabolism in boosting innate immunity, and outlines an NHR-25-mediated mechanism for pathogen detection in intestinal epithelia.

Design and Synthesis of sEH/HDAC6 Dual-Targeting Inhibitors for the Treatment of Inflammatory Pain.

Soluble epoxide hydrolase (sEH) and HDAC6 mediate the NF-κB pathway in inflammatory responses, and their inhibitors exhibit powerful anti-inflammatory and analgesic activities in treating both inflammation and pain. Therefore, a series of dual-targeting inhibitors containing urea or squaramide and hydroxamic acid moieties were designed and synthesized, and their role as a new sEH/HDAC6 dual-targeting inhibitor in inflammatory pain was evaluated in a formalin-induced mice model and a xylene-induced mouse ear swelling model. Among them, compounds 28g and 28j showed the best inhibitory and selectivity of sEH and HDAC6. Compound 28g had satisfactory pharmacokinetic characteristics in rats. Following administration at 30 mg/kg, compound 28g exhibited more effective analgesic activity than either an sEH inhibitor (GL-B437) or an HDAC6 inhibitor (Rocilinostat) alone and coadministration of both inhibitors. Thus, these novel sEH/HDAC6 dual-targeting inhibitors exhibited powerful analgesic activity in nociceptive behavior and are worthy of further development.

Machine learning assisted understanding of the layer-thickness dependent thermal conductivity in fluorinated graphene.

Manipulating thermal conductivity (κ) plays vital role in high-performance thermoelectric conversion, thermal insulation and thermal management devices. In this work, we using the machine learning-based interatomic potential and the phonon Boltzmann transport equation to systematically investigate layer thickness dependentκof fluorinated graphene (FG). We show that the latticeκof FG can be significantly decreased with Bernal bilayer stacking. Surprisingly, the further increasing of stacking layer can no longer affect theκ, however, theκis increased in the bulk configuration. The variation ofκcan be attributed to the crystal symmetry change from P-3m1 (164) at single layer to P3m1 (156) at multilayer. The decreasing crystal symmetry from single layer to bilayer resulting stronger phonon scattering and thus leading a lowerκ. Moreover, we also show that the contribution of acoustic mode toκdecreases with the increase of layers, while the contribution of optical mode toκis increased with increasing layers. These results provide a further understanding for the phonon scattering mechanism of layer thickness dependentκ.

Atractylenolide-I Alleviates Hyperglycemia-Induced Heart Developmental Malformations through Direct and Indirect Modulation of the STAT3 Pathway.

BACKGROUND: Gestational diabetes could elevate the risk of congenital heart defects (CHD) in infants, and effective preventive and therapeutic medications are currently lacking. Atractylenolide-I (AT-I) is the active ingredient of Atractylodes Macrocephala Koidz (known as Baizhu in China), which is a traditional pregnancy-supporting Chinese herb. PURPOSE: In this study, we investigated the protective effect of AT-I on the development of CHD in embryos exposed to high glucose (HG). STUDY DESIGN AND METHODS: First, systematic review search results revealed associations between gestational diabetes mellitus (GDM) and cardiovascular malformations. Subsequently, a second systematic review indicated that heart malformations were consistently associated with oxidative stress and cell apoptosis. We assessed the cytotoxic impacts of Atractylenolide compounds (AT-I, AT-II, and AT-III) on H9c2 cells and chick embryos, determining an optimal concentration of AT-I for further investigation. Second, immunofluorescence, western blot, Polymerase Chain Reaction (PCR), and flow cytometry were utilized to delve into the mechanisms through which AT-I mitigates oxidative stress and apoptosis in cardiac cells. Molecular docking was employed to investigate whether AT-I exerts cardioprotective effects via the STAT3 pathway. Then, we developed a streptozotocin-induced diabetes mellitus (PGDM) mouse model to evaluate AT-I's protective efficacy in mammals. Finally, we explored how AT-I protects hyperglycemia-induced abnormal fetal heart development through microbiota analysis and untargeted metabolomics analysis. RESULTS: The study showed the protective effect of AT-I on embryonic development using a chick embryo model which rescued the increase in the reactive oxygen species (ROS) and decrease in cell survival induced by HG. We also provided evidence suggesting that AT-I might directly interact with STAT3, inhibiting its phosphorylation. Further, in the PGDM mouse model, we observed that AT-I not only partially alleviated PGDM-related blood glucose issues and complications but also mitigated hyperglycemia-induced abnormal fetal heart development in pregnant mice. This effect is hypothesized to be mediated through alterations in gut microbiota composition. We proposed that dysregulation in microbiota metabolism could influence the downstream STAT3 signaling pathway via EGFR, consequently impacting cardiac development and formation. CONCLUSIONS: This study marks the first documented instance of AT-I's effectiveness in reducing the risk of early cardiac developmental anomalies in fetuses affected by gestational diabetes. AT-I achieves this by inhibiting the STAT3 pathway activated by ROS during gestational diabetes, significantly reducing the risk of fetal cardiac abnormalities. Notably, AT-I also indirectly safeguards normal fetal cardiac development by influencing the maternal gut microbiota and suppressing the EGFR/STAT3 pathway.

Ultrathin Al2O3film modification on waterborne epoxy coatings by atomic layer deposition for augmenting the corrosion resistance.

The polar channels formed by the curing of waterborne anticorrosive coatings compromise their water resistance, leading to coating degradation and metal corrosion. To enhance the anticorrosive performance of waterborne coatings, this study proposed a novel method of depositing ultrathin Al2O3films on the surface of waterborne epoxy coatings by atomic layer deposition, a technique that can modify the surface properties of polymer materials by depositing functional films. The Al2O3-modified coatings exhibited improved sealing and barrier properties by closing the polar channels and surface defects and cracks. The surface structure and morphology of the modified coatings were characterized by x-ray photoelectron spectroscopy and scanning electron microscopy. The hydrophilicity and corrosion resistance of the modified coatings were evaluated by water contact angle measurement, Tafel polarization curve, and electrochemical impedance spectroscopy. The results indicated that the water contact angle of the Al2O3-modified coating increased by 48° compared to the unmodified coating, and the protection efficiency of the modified coating reached 99.81%. The Al2O3-modified coating demonstrated high anticorrosive efficiency and potential applications for metal anticorrosion in harsh marine environments.

Comparison of ureteral stone measurements for predicting the efficacy of a single session of extracorporeal shockwave lithotripsy: one-, two-, and three-dimensional computed tomography measurements.

The objective of this study was to compare the value of one-, two- and three-dimensional computed tomography (CT) measurements for predicting the efficacy of a single session of extracorporeal shock wave lithotripsy (ESWL) in patients with a single ureteral stone. A total of 165 patients were included based on the inclusion and exclusion criteria. Different models were constructed using a combination of patients' clinical data and measurements obtained by manual sketching and automated extraction software. Multivariate logistic regression was used to develop the models. Receiver operating characteristic curves were used to assess the performance of the models. There was good interobserver agreement for all measurements in different dimensions (P < 0.001). We also found that hydronephrosis, the largest diameter, the largest area, volume, and mean CT value were significantly greater in the failure group than in the success group (P < 0.01). Furthermore, all sizes and CT measurement values were found to be independent predictors for predicting efficacy after one session of ESWL (P < 0.05). In addition, the multivariate logistic analysis showed that the area under the curve (AUC) for two-dimensional and three-dimensional measurements was superior to that of one-dimensional measurement (P < 0.01). However, when size alone was included as a measurable predictor, there was no significant difference in the AUC among the one-, two-, and three-dimensional measurements (P > 0.05). In summary, after adjusting for clinical data, two- and three-dimensional measurements combining ureteral stone size and CT values were found to be the best predictors of ESWL efficacy, and software-based three-dimensional measurements should be considered to avoid interobserver variability in clinical practice.

Activation of polyimide by oxygen plasma for atomic layer deposition of highly compact titanium oxide coating.

Titanium oxide (TiO2) coated polyimide has broad application prospects under extreme conditions. In order to obtain a high-quality ultra-thin TiO2coating on polyimide by atomic layer deposition (ALD), the polyimide was activated byin situoxygen plasma. It was found that a large number of polar oxygen functional groups, such as carboxyl, were generated on the surface of the activated polyimide, which can significantly promote the preparation of TiO2coating by ALD. The nucleation and growth of TiO2were studied by x-ray photoelectron spectroscopy monitoring and scanning electron microscopy observation. On the polyimide activated by oxygen plasma, the size of TiO2nuclei decreased and the quantity of TiO2nuclei increased, resulting in the growth of a highly uniform and dense TiO2coating. This coating exhibited excellent resistance to atomic oxygen. When exposed to 3.5 × 1021atom cm-2atomic oxygen flux, the erosion yield of the polyimide coated with 100 ALD cycles of TiO2was as low as 3.0 × 10-25cm3/atom, which is one order less than that of the standard POLYIMIDE-ref Kapton®film.

Exploring the role and mechanism of hyperoside against cardiomyocyte injury in mice with myocardial infarction based on JAK2/STAT3 signaling pathway.

BACKGROUND: Myocardial infarction (MI) is one of the most deadly diseases in the world. Hyperoside (Hyp) has been shown to have a protective effect on cardiovascular function through various signaling pathways, but whether it can protect myocardial infarction by regulating JAK2/STAT3 signaling pathway is unknown. AIM OF THE STUDY: To investigate whether Hyp could protect the heart against myocardial infarction injury in mice by modulating JAK2/STAT3 signaling pathway and its potential mechanism. METHODS: In vivo experiments, the myocardial infarction model was established by ligating the left anterior descending coronary artery (LAD) of male C57BL/6 mice permanently. The mice were divided into seven groups: sham group, MI group, MI+Hyp (9 mg/kg), MI+Hyp (18 mg/kg) group, MI+Hyp (36 mg/kg) group, MI+Captopril group (15 mg/kg) group and MI+Hyp (36 mg/kg)+AG490 (7.5 mg/kg) group. Each group of animals were given different concentrations of hyperoside, positive control drug or inhibitor of JAK2/STAT3 singaling. After 14 days of administration, the electrocardiogram (ECG), echocardiography and serum myocardial injury markers were examined; Slices of mouse myocardial tissue were assessed for histopathological changes by HE, Masson and Sirius Red staining. TTC and TUNEL staining were used to evaluate the myocardial infarction area and cardiomyocytes apoptosis respectively. The expression of JAK2/STAT3 signaling pathway, apoptosis and autophagy-related proteins were detected by western blot. In vitro experiments, rat H9c2 cardiomyocytes were deprived of oxygen and glucose (OGD) to stimulate myocardial ischemia. The experiment was divided into seven groups: Control group, OGD group, OGD+Hyp (20 µM) group, OGD+Hyp (40 µM) group, OGD+Hyp (80 µM), OGD+Captopril (10 µM) group and OGD+Hyp (80 µM)+AG490 (100 µM) group. Myocardial cell damage and redox index were measured 12 h after OGD treatment. ROS content in cardiomyocytes was detected by immunofluorescence. Cardiomyocytes apoptosis was detected by flow cytometry. The expressions of JAK2/STAT3 signaling pathway-related proteins, apoptosis and autophagy related proteins were detected by western blot. RESULTS: In vivo, hyperoside could ameolirate ECG abnormality, increase cardiac function, reduce myocardial infarction size and significantly reduce myocardial fibrosis level and oxidation level. The experimental results in vitro showed that Hyp could reduce the ROS content in cardiomyocytes, decrease the level of oxidative stress and counteract the apoptosis induced by OGD injury . Both in vivo and in vitro experiments showed that hyperoside could increase phosphorylated JAK2 and STAT3, indicating that hyperoside could play a cardioprotective role by activating JAK2/STAT3 signaling pathway. It was also shown that hyperoside could increase the autophagy level of cardiomyocytes in vivo and in vitro. However the cardiomyocyte-protective effect of Hyp was abolished in combination with JAK2/ STAT3 signaling pathway inhibitor AG490. These results indicated that the protective effect of Hyp on cardiomyocyte injury was at least partially achieved through the activation of the JAK2/STAT3 signaling pathway. CONCLUSION: Hyp can significantly improve cardiac function, ameliorate myocardial hypertrophy and myocardial remodeling in MI mice. The mechanism may be related to improving mitochondrial autophagy of cardiomyocytes to maintain the advantage of autophagy, and blocking apoptosis pathway through phagocytosis, thus suppressing apoptosis level of cardiomyocytes. These effects of Hyp are achieved, at least in part, by activating the JAK2/STAT3 signaling pathway.

Low-frequency vibrational density of states of ordinary and ultra-stable glasses.

A remarkable feature of disordered solids distinct from crystals is the violation of the Debye scaling law of the low-frequency vibrational density of states. Because the low-frequency vibration is responsible for many properties of solids, it is crucial to elucidate it for disordered solids. Numerous recent studies have suggested power-law scalings of the low-frequency vibrational density of states, but the scaling exponent is currently under intensive debate. Here, by classifying disordered solids into stable and unstable ones, we find two distinct and robust scaling exponents for non-phononic modes at low frequencies. Using the competition of these two scalings, we clarify the variation of the scaling exponent and hence reconcile the debate. Via the study of both ordinary and ultra-stable glasses, our work reveals a comprehensive picture of the low-frequency vibration of disordered solids and sheds light on the low-frequency vibrational features of ultra-stable glasses on approaching the ideal glass.

Design and Synthesis of Dual-Targeting Inhibitors of sEH and HDAC6 for the Treatment of Neuropathic Pain and Lipopolysaccharide-Induced Mortality.

Epoxyeicosatrienoic acids with anti-inflammatory effects are inactivated by soluble epoxide hydrolase (sEH). Both sEH and histone deacetylase 6 (HDAC6) inhibitors are being developed as neuropathic pain relieving agents. Based on the structural similarity, we designed a new group of compounds with inhibition of both HDAC6 and sEH and obtained compound M9. M9 exhibits selective inhibition of HDAC6 over class I HDACs in cells. M9 shows good microsomal stability, moderate plasma protein binding rate, and oral bioavailability. M9 exhibited a strong analgesic effect in vivo, and its analgesic tolerance was better than gabapentin. M9 improved the survival time of mice treated with lipopolysaccharide (LPS) and reversed the levels of inflammatory factors induced by LPS in mouse plasma. M9 represents the first sEH/HDAC6 dual inhibitors with in vivo antineuropathic pain and anti-inflammation.

Long-Term Effectiveness of Ear Molding and Factors Affecting Outcomes.

BACKGROUND: The EarWell System offers a correction opportunity for infants born with ear anomalies. However, the long-term effectiveness of ear molding remains unclear. This study aimed to explore the long-term effectiveness of this novel technique and to determine the risk factors for recurrence. METHODS: This retrospective, population-based cohort study was performed from 2017 through 2021. Infants who completed ear molding therapy and were followed up for longer than 6 months were enrolled. The main outcomes were immediate and long-term efficacy, which were graded by two blinded plastic surgeons. RESULTS: A total of 226 infants (334 ears) were recruited. The most common anomalies were helical deformities [113 ears (33.8%)], and the rarest were cryptotia [five ears (1.5%)] and conchal crus [five ears (1.5%)]. The age at initiation of treatment was a factor affecting both immediate ( P = 0.004) and long-term effectiveness ( P = 0.009). The type of anomaly also influenced long-term molding outcomes. For cup ears, the success rate of long-term outcomes (76.0%) was significantly lower than that of immediate outcomes (98.7%) ( P < 0.001). Prominent ear, cup ear, and microtia were found to be the most likely to relapse during long-term follow-up. The results of logistic regression also demonstrated age, duration time, and the type of anomaly to be risk factors of ear molding effects. CONCLUSIONS: The EarWell System was shown to be a secure and effective method for treatment of congenital ear anomalies. Some infants' ear anomalies recurred after successful immediate results. The age at initiation of treatment and the type of anomaly were predictors of long-term outcomes. CLINICAL QUESTION/LEVEL OF EVIDENCE: Risk, III.

Palladium-Catalyzed Enantioselective Directed C(sp3)-H Functionalization Using C5-Substituted 8-Aminoquinoline Auxiliaries.

8-Aminoquinoline (AQ) has proven to be a highly effective bidentate directing group for palladium-catalyzed C-H functionalization reactions. However, enantiocontrol of AQ-directed C(sp3)-H functionalization reactions has been challenging. Herein, a new protocol is presented for the Pd-catalyzed enantioselective arylation of unactivated ß C(sp3)-H bonds of alkyl carboxamides with aryl iodides using a C5-iodinated 8-aminoquinolines (IQ) auxiliary in conjugation with a BINOL ligand. Additionally, a C5-aryl substituted 8-aminoquinoline auxiliary can facilitate enantioselective alkenylation and alkynylation of benzylic C(sp3)-H bonds of 3-arylpropanamides with the corresponding bromide reagents under similar conditions.

First-principles prediction of the thermal conductivity of two configurations of difluorinated graphene monolayer.

Lattice thermal conductivity (κL) plays a crucial role in the thermal management of electronic devices. In this study, we systematically investigate the thermal transport properties of monolayer fluorinated graphene using a combination of machine learning-based interatomic potentials and the phonon Boltzmann transport equation. At a temperature of 300 K, we find that the κL values for chair-configured fluorinated graphene monolayers are 184.24 W m-1 K-1 in the zigzag direction and 205.57 W m-1 K-1 in the armchair direction. For the boat configuration, the κL values are 120.45 W m-1 K-1 and 64.26 W m-1 K-1 in the respective directions. The disparities in κL between these two configurations predominantly stem from differences in phonon relaxation times, which can be elucidated by examining the Grüneisen parameters representing the degree of anharmonicity. A more in-depth analysis of bond strengths, as assessed by the crystal orbital Hamiltonian population, reveals that the stronger in-plane CC bonds in chair-configured fluorinated graphene monolayers are the primary contributors to the observed variations in anharmonicity.

[Effects of virtual reality in phase I cardiac rehabilitation training for elderly coronary heart disease patients after percutaneous coronary intervention].

The study aimed to examine the effects of virtual reality (VR) technology-based phase I cardiac rehabilitation (CR) program in elderly coronary heart disease (CHD) patients after percutaneous coronary intervention (PCI). Thirty-six cases of elderly CHD patients who underwent PCI in the First Affiliated Hospital of Chongqing Medical University from June 2022 to April 2023 were recruited by convenience sampling method. The patients were randomly assigned by means of random digital table method to two study groups: control group (n = 18), which received conventional nursing intervention after PCI, and experimental group (n = 18), which received a combined program of conventional nursing intervention together with CR program based on VR technology. The 6 min walk test (6MWT), Simple Physical Performance Battery (SPPB), SF-36 scale, Hospital Anxiety and Depression Scale (HADS) and Impact of Events Scale-Revised (IES-R) were tested before and after rehabilitation. Moreover, the incidence of major adverse cardiovascular events (MACE) was recorded at 3 months after PCI. After VR-based CR, the 6MWT distance and SPPB scores of patients in the experimental group were higher than those in control group (P < 0.05). The HADS scores and IES-R scores of the patients in the experimental group were lower than those in control group (P < 0.01), and the difference in SF-36 scale scores was not statistically significant between two groups (P > 0.05). The incidence of MACE was not significantly different at 3 months after PCI (P > 0.05). These results suggest that VR-based phase I CR program mitigates the degree of PCI postoperative stress, anxiety, and depression in elderly CHD patients, however, enhances the resistance to fatigue and does not increase the risk of adverse cardiac events, suggesting it is a safe intervention.

Nickel-Regulated Composite Cathode with Balanced Triple Conductivity for Proton-Conducting Solid Oxide Fuel Cells.

Proton-conducting solid oxide fuel cells (H-SOFCs) have the potential to be a promising technology for energy conversion and storage. To achieve high chemical compatibility and catalytic activity, nickel-doped barium ferrate with triple conducting ability is developed as cathodes for H-SOFCs, presenting an impressive electrochemical performance at intermediate temperatures. The cell performance with the optimized BaCe0.26 Ni0.1 Fe0.64 O3 -δ (BCNF10) composite cathode reaches an outstanding performance of 1.04 W cm-2 at 600 °C. The high electrocatalytic capacity of the nickel-doped barium ferrate cathode can be attributed to its significant proton conductivity which is confirmed through hydrogen permeation experiments. Density functional theory (DFT) calculations are further conducted to reveal that the presence of nickel can enhance processes of hydration formation and proton migration, leading to improve proton conductivity and electro-catalytic activity.

[Effects of Cytokines on Early Death in Patients with Newly Diagnosed Acute Promyelocytic Leukemia].

OBJECTIVE: To explore the effect of cytokine levels on early death and coagulation function of patients with newly diagnosed acute promyelocytic leukemia (APL). METHODS: Routine examination was performed on 69 newly diagnosed APL patients at admission. Meanwhile, 4 ml fasting venous blood was extracted from the patients. And then the supernatant was taken after centrifugation. The concentrations of cytokines, lactate dehydrogenase (LDH) and ferritin were detected by using the corresponding kits. RESULTS: It was confirmed that cerebral hemorrhage was a major cause of early death in APL patients. Elevated LDH, decreased platelets (PLT) count and prolonged prothrombin time (PT) were high risk factors for early death (P <0.05). The increases of IL-5, IL-6, IL-10, IL-12p70 and IL-17A were closely related to the early death of newly diagnosed APL patients, and the increases of IL-5 and IL-17A also induced coagulation disorder in APL patients by prolonging PT (P <0.05). In newly diagnosed APL patients, ferritin and LDH showed a positive effect on the expression of IL-5, IL-10 and IL-17A, especially ferritin had a highly positive correlation with IL-5 (r =0.867) and IL-17A (r =0.841). Moreover, there was a certain correlation between these five high-risk cytokines, among which IL-5 and IL-17A (r =0.827), IL-6 and IL-10 (r =0.823) were highly positively correlated. CONCLUSION: Elevated cytokine levels in newly diagnosed APL patients increase the risk of early bleeding and death. In addition to the interaction between cytokines themselves, ferritin and LDH positively affect the expression of cytokines, thus affecting the prognosis of APL patients.