RESUMEN
Quantifying spore germination and outgrowth heterogeneity is challenging. Single cell level analysis should provide supplementary knowledge regarding the impact of unfavorable conditions on germination and outgrowth dynamics. This work aimed to quantify the impact of pH on spore germination and outgrowth, investigating the behavior of individual spore crops, produced under optimal and suboptimal conditions. Bacillus mycoides (formerly B. weihenstephanensis) KBAB4 spores, produced at pH 7.4 and at pH 5.5 were incubated at different pH values, from pH 5.2 to 7.4. The spores were monitored by microscopy live imaging, in controlled conditions, at 30 °C. The images were analyzed using SporeTracker, to determine the state of single cells. The impact of pH on germination and outgrowth times and rates was estimated and the correlation between these parameters was quantified. The correlation between germination and outgrowth times was significantly higher at low pH. These results suggest that an environmental pressure highlights the heterogeneity of spore germination and outgrowth within a spore population. Results were consistent with previous observations at population level, now confirmed and extended to single cell level. Therefore, single cell level analyses can be used to quantify the heterogeneity of spore populations, which is of interest in order to control the development of spore-forming bacteria, responsible for food safety issues.
Asunto(s)
Bacillus , Esporas Bacterianas , Humanos , Esporas , Concentración de Iones de Hidrógeno , Bacillus subtilisRESUMEN
Some Bacillus thuringiensis (Bt) strains are used as pesticide agent. This species belongs to Bacillus cereus (Bc) group which contains many species with a high phenotypic diversity, and could be pathogenic like B. cereus. The aim of this study was to characterize the phenotype of 90 strains belonging to Bc group, half of which were Bt. Knowing that Bt strains belong to different phylogenetic Bc groups, do Bt strains have the same phenotype than other Bc group strains? Five phenotypic parameters were estimated for 90 strains in the Bc group, of which 43 were Bt strains: minimal, maximal and optimal growth temperature, cytotoxicity on Caco-2 cells, heat resistance of spores. The dataset was processed by principal component analysis, showing that 53% of the variance of the profiles corresponded to factors linked to growth, heat resistance and cytotoxicity. The phenotype followed the phylogenetic groups based on panC. Bt strains showed similar behavior to other strains in the Bc group, in our experimental conditions. Commercial bio-insecticide strains were mesophilic with low heat resistance.
Asunto(s)
Bacillus thuringiensis , Bacillus , Humanos , Bacillus cereus/genética , Bacillus thuringiensis/genética , Filogenia , Células CACO-2 , FenotipoRESUMEN
Changes with time of a population of Bacillus weihenstephanensis KBAB4 and Bacillus licheniformis AD978 dormant spores into germinated spores and vegetative cells were followed by flow cytometry, at pH ranges of 4.7 to 7.4 and temperatures of 10°C to 37°C for B. weihenstephanensis and 18°C to 59°C for B. licheniformis Incubation conditions lower than optimal temperatures or pH led to lower proportions of dormant spores able to germinate and extended time of germination, a lower proportion of germinated spores able to outgrow, an extension of their times of outgrowth, and an increase of the heterogeneity of spore outgrowth time. A model based on the strain growth limits was proposed to quantify the impact of incubation temperature and pH on the passage through each physiological stage. The heat treatment temperature or time acted independently on spore recovery. Indeed, a treatment at 85°C for 12 min or at 95°C for 2 min did not have the same impact on spore germination and outgrowth kinetics of B. weihenstephanensis despite the fact that they both led to a 10-fold reduction of the population. Moreover, acidic sporulation pH increased the time of outgrowth 1.2-fold and lowered the proportion of spores able to germinate and outgrow 1.4-fold. Interestingly, we showed by proteomic analysis that some proteins involved in germination and outgrowth were detected at a lower abundance in spores produced at pH 5.5 than in those produced at pH 7.0, maybe at the origin of germination and outgrowth behavior of spores produced at suboptimal pH.IMPORTANCE Sporulation and incubation conditions have an impact on the numbers of spores able to recover after exposure to sublethal heat treatment. Using flow cytometry, we were able to follow at a single-cell level the changes in the physiological states of heat-stressed spores of Bacillus spp. and to discriminate between dormant spores, germinated spores, and outgrowing vegetative cells. We developed original mathematical models that describe (i) the changes with time of the proportion of cells in their different states during germination and outgrowth and (ii) the influence of temperature and pH on the kinetics of spore recovery using the growth limits of the tested strains as model parameters. We think that these models better predict spore recovery after a sublethal heat treatment, a common situation in food processing and a concern for food preservation and safety.
Asunto(s)
Bacillus licheniformis/crecimiento & desarrollo , Bacillus/crecimiento & desarrollo , Esporas Bacterianas/crecimiento & desarrollo , Calor , Modelos TeóricosRESUMEN
Heat treatment is the main hurdle used to eliminate spores in foods but the pH conditions which spores encounter after the treatment have a tremendous impact on the spore ability to germinate, outgrow and grow. The aim of this work was to discriminate the inactive permeable spores and the active spores in unfavorable acidic conditions, after a heat treatment. In this study, Bacillus weihenstephanensis KBAB4 was used as model micro-organism for psychrotrophic Bacillus. The spores were heat treated to inactivate 90% of the population, 12â¯min at 85⯰C, or 2â¯min at 95⯰C. After each treatment the spores were incubated at pH 5.50 or pH 7.40. The evolution of dormant spores, permeable spores, germinated and vegetative cells was monitored by flow cytometry using a double staining. LDS 751, stains in red all the permeable cells, and CFDA stains in green cells presenting an esterase activity. Dormant spores did not show neither red fluorescence nor green fluorescence. Permeabilized spores which did not recover metabolic activity were red fluorescent but not green fluorescent. Germinated spores (permeabilized and having an esterase activity) appeared red fluorescent and green fluorescent due to their permeability and their metabolic activity. This method allowed the differentiation of the impact of heat treatment and post-treatment incubation pH on the two first steps of germination: spore permeabilization and activity recovery. Having a better understanding of spore germination at unfavorable post-treatment pH allows a better control of spore forming bacteria in foods.
Asunto(s)
Bacillus/crecimiento & desarrollo , Bacillus/metabolismo , Esporas Bacterianas/crecimiento & desarrollo , Esporas Bacterianas/metabolismo , Citometría de Flujo , Fluorescencia , Microbiología de Alimentos , Calor/efectos adversos , Concentración de Iones de Hidrógeno , Cinética , Permeabilidad , Factores de TiempoRESUMEN
The recovery at a range of incubation temperatures and pH of spores of Bacillus weihenstephanensis KBAB4 exposed to a peracetic acid-based disinfectant (PABD) or to pulsed light was estimated. Spores of B. weihenstephanensis were produced at 30⯰C and pHâ¯7.00, at 30⯰C and pHâ¯5.50, or at 12⯰C and pHâ¯7.00. The spores were treated with a commercial peracetic acid-based disinfectant at 80â¯mg·mL-1 for 0 to 200â¯min at 18⯰C or by pulsed light at fluences ranging between 0.4 and 2.3â¯J·cm-2 for pulsed light treatment. After each treatment, the spores were incubated on nutrient agar at 12⯰C, 30⯰C or 37⯰C, or at pHâ¯5.10, 6.00 or 7.40. Incubation temperature during recovery had a significant impact only near the recovery limits, beyond which surviving spores previously exposed to a PABD or to pulsed light were not able to form colonies. In contrast, a decrease in pH of the recovery nutrient agar had a progressive impact on the ability of spores to form colonies. The time to first log reduction after PABD treatment was 29.5⯱â¯0.7â¯min with recovery at pHâ¯7.40, and was tremendously shortened 5.1⯱â¯0.2â¯min with recovery at pHâ¯5.10. Concerning the fluence necessary for the first log reduction, it was 1.5 times higher when the spores were recovered at pHâ¯6.00 compared to a recovery at pHâ¯5.10. The impact of recovery temperature and pH can be described with a mathematical model using cardinal temperature and pH as parameters. These effects of temperature and pH on recovery of Bacillus weihenstephanensis spores exposed to a disinfectant combining peracetic acid and hydrogen peroxide, or pulsed light are similar, although these treatments are of different natures. Sporulation temperature or pH did not impact resistance to the peracetic acid-based disinfectant or pulsed light.
Asunto(s)
Bacillus/crecimiento & desarrollo , Desinfectantes/farmacología , Peróxido de Hidrógeno/farmacología , Ácido Peracético/farmacología , Esporas Bacterianas/crecimiento & desarrollo , Calor , Concentración de Iones de Hidrógeno , Esporas Bacterianas/efectos de los fármacos , Esterilización/métodosRESUMEN
The apparent heat resistance of spores of Bacillus weihenstephanensis and Bacillus licheniformis was measured and expressed as the time to first decimal reduction (δ value) at a given recovery temperature and pH. Spores of B. weihenstephanensis were produced at 30°C and 12°C, and spores of B. licheniformis were produced at 45°C and 20°C. B. weihenstephanensis spores were then heat treated at 85°C, 90°C, and 95°C, and B. licheniformis spores were heat treated at 95°C, 100°C, and 105°C. Heat-treated spores were grown on nutrient agar at a range of temperatures (4°C to 40°C for B. weihenstephanensis and 15°C to 60°C for B. licheniformis) or a range of pHs (between pH 4.5 and pH 9.5 for both strains). The recovery temperature had a slight effect on the apparent heat resistance, except very near recovery boundaries. In contrast, a decrease in the recovery pH had a progressive impact on apparent heat resistance. A model describing the heat resistance and the ability to recover according to the sporulation temperature, temperature of treatment, and recovery temperature and pH was proposed. This model derived from secondary mathematical models for growth prediction. Previously published cardinal temperature and pH values were used as input parameters. The fitting of the model with apparent heat resistance data obtained for a wide range of spore treatment and recovery conditions was highly satisfactory.