Insight into the role of copper-based materials against the coronaviruses MHV-3, a model for SARS-CoV-2, during the COVID-19 pandemic.

Coating high-touch surfaces with inorganic agents, such as metals, appears to be a promising long-term disinfection strategy. However, there is a lack of studies exploring the effectiveness of copper-based products against viruses. In this study, we evaluated the cytotoxicity and virucidal effectiveness of products and materials containing copper against mouse hepatitis virus (MHV-3), a surrogate model for SARS-CoV-2. The results demonstrate that pure CuO and Cu possess activity against the enveloped virus at very low concentrations, ranging from 0.001 to 0.1% (w/v). A greater virucidal efficacy of CuO was found for nanoparticles, which showed activity even against viruses that are more resistant to disinfection such as feline calicivirus (FCV). Most of the evaluated products, with concentrations of Cu or CuO between 0.003 and 15% (w/v), were effective against MHV-3. Cryomicroscopy images of an MHV-3 sample exposed to a CuO-containing surface showed extensive damage to the viral capsid, presumably due to the direct or indirect action of copper ions.

Fast inactivation of coronavirus in filtering-facepiece respirators in a reflective cylindrical UV-C chamber.

Objective: We report on the development and characterization of a UV-C (λ  =  200 - 280 nm, λpeak = 254 nm) chamber designed for the rapid disinfection of N95 class filtering-facepiece respirators contaminated with SARS-CoV-2 coronaviruses. The device was evaluated against Betacoronavirus strain MHV-3 and its virucidal capacity was evaluated as a function of different applied UV-C doses (UV-C exposure times of 60 s, 120 s, 180 s, and 240 s) using two types of respirators geometry (shell and two-panel shapes, 3M 8801 H and 9920 H, respectively), at eight points of the respirators. Background: Most chemical disinfection methods are not recommended for N95 masks. UV-C light provided by UVGI lamps (254 nm) is an effective physical agent against viruses and bacteria due to direct photochemical harming effect on DNA/RNA, and can provide rapid disinfection for personal protective equipment such as N95/PFF2 masks. Results: The device reached a mean elimination rate of 99.9999% of MHV-3 inoculated into all the assessed different points on the tested PFF2 respirator models in a UV-C cycle of just 60 s. Statistical analysis performed through Person´s chi-square test showed no correlation between the viral infectivity reduction and the viral inoculation point (p = 0.512) and the tested respirator models (p = 0.556). However, a correlation was found between the exposure time and the viral infectivity reduction (p = 0.000*), between UV-C and no UV-C exposure. All the tested UV-C exposure times (60 s, 120 s, 180 s, and 240 s) provided the same reduction in infection rates. Therefore, 60 s was confirmed as the minimum exposure time to achieve a 99.9999% or 6 Log reduction in MHV-3 coronavirus infection rates in the PFF2 samples tested in the device. Conclusions: We conclude that the assessed UV-C chamber for the inactivation of MHV-3 coronavirus in N95/PFF2 standard masks can be a promising tool for effective and rapid disinfection of coronaviruses, including SARS-CoV-2 virus.

Virucidal PVP-Copper Salt Composites against Coronavirus Produced by Electrospinning and Electrospraying.

Electrospinning technology was used to produced polyvinylpyrrolidone (PVP)-copper salt composites with structural differences, and their virucidal activity against coronavirus was investigated. The solutions were prepared with 20, 13.3, 10, and 6.6% w/v PVP containing 3, 1.0, 0.6, and 0.2% w/v Cu (II), respectively. The rheological properties and electrical conductivity contributing to the formation of the morphologies of the composite materials were observed by scanning electron microscopy (SEM). SEM images revealed the formation of electrospun PVP-copper salt ultrafine composite fibers (0.80 ± 0.35 µm) and electrosprayed PVP-copper salt composite microparticles (1.50 ± 0.70 µm). Energy-dispersive X-ray spectroscopy (EDS) evidenced the incorporation of copper into the produced composite materials. IR spectra confirmed the chemical composition and showed an interaction of Cu (II) ions with oxygen in the PVP resonant ring. Virucidal composite fibers inactivated 99.999% of coronavirus within 5 min of contact time, with moderate cytotoxicity to L929 cells, whereas the virucidal composite microparticles presented with a virucidal efficiency of 99.999% within 1440 min of exposure, with low cytotoxicity to L929 cells (mouse fibroblast). This produced virucidal composite materials have the potential to be applied in respirators, personal protective equipment, self-cleaning surfaces, and to fabric coat personal protective equipment against SARS-CoV-2, viral outbreaks, or pandemics.

High-Resolution Magic-Angle Spinning NMR Spectroscopy for Evaluation of Cell Shielding by Virucidal Composites Based on Biogenic Silver Nanoparticles, Flexible Cellulose Nanofibers and Graphene Oxide.

Antiviral and non-toxic effects of silver nanoparticles onto in vitro cells infected with coronavirus were evaluated in this study using High-Resolution Magic-Angle Spinning Nuclear Magnetic Resonance (HR-MAS NMR) spectroscopy. Silver nanoparticles were designed and synthesized using an orange flavonoid-hesperetin (HST)-for reduction of silver(I) and stabilization of as obtained nanoparticles. The bio-inspired process is a simple, clean, and sustainable way to synthesize biogenic silver nanoparticles (AgNP@HST) with diameters of ∼20 nm and low zeta potential (-40 mV), with great colloidal stability monitored for 2 years. The nanoparticles were used for the fabrication of two types of antiviral materials: colloids (AgNP@HST spray) and 3D flexible nanostructured composites. The composites, decorated with AgNP@HST (0.05 mmol L-1), were made using cellulose nanofibers (CNF) obtained from orange peel and graphene oxide (GO), being denominated CNF@GO@AgNP@HST. Both materials showed high virucidal activity against coronaviruses in cell infection in vitro models and successfully inhibited the viral activity in cells. HR-MAS 1H-NMR technique was used for determining nanomaterials' effects on living cells and their influences on metabolic pathways, as well as to study viral effects on cells. It was proven that none of the manufactured materials showed toxicity towards the intact cells used. Furthermore, viral infection was reverted when cells, infected with the coronavirus, were treated using the as-fabricated nanomaterials. These significant results open possibilities for antiviral application of 3D flexible nanostructured composite such as packaging papers and filters for facial masks, while the colloidal AgNP@HST spray can be used for disinfecting surfaces, as well as a nasal, mouth, and eye spray.

High genetic diversity of alphacoronaviruses in bat species (Mammalia: Chiroptera) from the Atlantic Forest in Brazil.

Bat coronaviruses (Bat-CoVs) represent around 35% of all virus genomes described in bats. Brazil has one of the highest mammal species diversity, with 181 species of bats described so far. However, few Bat-CoV surveillance programmes were carried out in the country. Thus, our aim was to jevaluate the Bat-CoV diversity in the Atlantic Forest, the second biome with the highest number of bat species in Brazil. We analysed 456 oral and rectal swabs and 22 tissue samples from Atlantic Forest bats, detecting Alphacoronavirus in 44 swab samples (9.6%) targeting the RdRp gene from seven different bat species, three of which have never been described as Bat-CoV hosts. Phylogenetic analysis of the amino acid (aa) sequences coding the RdRp gene grouped the sequences obtained in our study with Bat-CoV previously detected in identical or congeneric bat species, belonging to four subgenera, with high aa identity (over 90%). The RdRp gene was also detected in three tissue samples from Diphylla ecaudata and Sturnira lilium, and the partial S gene was successfully sequenced in five tissues and swab samples of D. ecaudata. The phylogenetic analysis based on the partial S gene obtained here grouped the sequence of D. ecaudata with CoV from Desmodus rotundus previously detected in Peru and Brazil, belonging to the Amalacovirus subgenus, with aa identity ranging from 73.6% to 88.8%. Our data reinforce the wide distribution of Coronaviruses in bats from Brazil and the novelty of three bats species as Bat-CoV hosts and the co-circulation of four Alphacoronavirus subgenera in Brazil.

Prompt Inactivation of Coronavirus Using a 280 nm Light-Emitting Diode Cluster Device.

Objective: We report on the development and characterization of a UV-C light-emitting diode (LED) 280 nm cluster prototype device designed for the rapid disinfection of SARS-CoV-2 coronaviruses. The device was evaluated against the Betacoronavirus mouse hepatitis virus-3 strain, and its virucidal capacity was probed as a function of different applied UV-C doses versus different situations concerning irradiation distances. Background: UV-C LEDs are light emitters that offer advantages over low-pressure mercury lamps, such as quasimonochromaticity, lower electrical power consumption, instant on/off with the instant full-power operation, unlimited on/off cycles for disinfection schemes, and a much longer lifetime operation, in addition to portability aspects, as well as UV-C LEDs do not contain heavy metal in its composition such as mercury, found in ultraviolet germicidal irradiation (UVGI) lamps. Results: This novel device reached a 99.999% elimination rate at a distance of 9 cm at all the tested irradiation times (dose dependence), demonstrating that it took only 30 sec to achieve this inactivation rate. Its virucidal effectivity in rapid virus inactivation was demonstrated. Conclusions: We conclude that the HHUVCS cluster device (λp = 280 nm) provides a rapid virucidal effect against the SARS-CoV-2 coronavirus. The current research should encourage further advances in UV-C LED-based devices designed for the inactivation of SARS-CoV-2 virus on surfaces, in air, and in liquids.

Hyperlactatemia of dialysis-dependent patients after cardiac surgery impacts on in-hospital mortality: a two-center retrospective study.

BACKGROUND: Lactate is a well-known marker to estimate prognosis after cardiac surgery and critically ill patients. The liver and kidney have a major role in lactate metabolism; however, there was less characterized about the change of lactate and threshold to predict in-hospital mortality in dialysis-dependent patients undertaking cardiac surgery. We conducted this retrospective observational study to characterize when and how lactate values after cardiac surgery affected in-hospital mortality. METHODS: This two-center retrospective study included dialysis-dependent patients who underwent cardiac surgery with a cardiopulmonary bypass from January 2014 to December 2018. Lactate values were collected at three points: at ICU admission (T1), the maximum level of lactate within 24 h postoperatively (T2), and 24 h after ICU admission (T3). We determined hyperlactatemia as more than 2 mmol/L following previous studies. RESULTS: We enrolled 122 dialysis-dependent patients. The mean age was 73 ± 8 years and hyperlactatemia was observed in 100 patients (81.9%). In-hospital mortality was 11.4%. Univariate analysis and area under curve in ROC suggested that T2 lactate was the most significantly associated with in-hospital mortality (AUC = 0.845). Multivariate logistic analysis showed a significant association between in-hospital mortality when patients showed early peak lactate levels of > 4.5 mmol/L after ICU admission (adjusted OR 8.35; 95% CI: 1.44-57.13). CONCLUSIONS: In dialysis-dependent patients after cardiac surgery, the early-onset of a maximum arterial lactate concentration of > 4.5 mmol/L was significantly associated with in-hospital mortality.

Antimicrobial textiles: Biogenic silver nanoparticles against Candida and Xanthomonas.

This paper introduces cotton fibers impregnated with biogenic silver nanoparticles (AgNPs), synthesized from a Fusarium oxysporum fungal filtrate (FF) solution, and open up the possibility for their use in medical environment and agriculture clothing as means to avoid microbial spreading. After thorough AgNPs characterization, regarding their physical, chemical and biochemical properties, Minimum Inhibitory Concentrations (MIC) against some human and orange tree pathogens were determined. We report the strong AgNPs activity against Candida parapsilosis and Xanthomonas axonopodis pv. citri (Xac) that was morphologically characterized, pointing to strong AgNPs effects on microorganisms' membranes. Cotton fibers were then impregnated with AgNPs suspension and these maintained strong antimicrobial activity even after repeated mechanical washing cycles (up to 10). Reported data might point to an application for biogenic AgNPs as potent agrochemicals, as well as, to their application in textiles for antiseptic clothing for medical and agronomic applications.

Electrolytic membrane extraction enables production of fine chemicals from biorefinery sidestreams.

Short-chain carboxylates such as acetate are easily produced through mixed culture fermentation of many biological waste streams, although routinely digested to biogas and combusted rather than harvested. We developed a pipeline to extract and upgrade short-chain carboxylates to esters via membrane electrolysis and biphasic esterification. Carboxylate-rich broths are electrolyzed in a cathodic chamber from which anions flux across an anion exchange membrane into an anodic chamber, resulting in a clean acid concentrate with neither solids nor biomass. Next, the aqueous carboxylic acid concentrate reacts with added alcohol in a water-excluding phase to generate volatile esters. In a batch extraction, 96 ± 1.6% of the total acetate was extracted in 48 h from biorefinery thin stillage (5 g L(-1) acetate) at 379 g m(-2) d(-1) (36% Coulombic efficiency). With continuously regenerated thin stillage, the anolyte was concentrated to 14 g/L acetic acid, and converted at 2.64 g (acetate) L(-1) h(-1) in the first hour to ethyl acetate by the addition of excess ethanol and heating to 70 °C, with a final total conversion of 58 ± 3%. This processing pipeline enables direct production of fine chemicals following undefined mixed culture fermentation, embedding carbon in industrial chemicals rather than returning them to the atmosphere as carbon dioxide.