Uniform or Sex-Specific Cardiac Troponin Thresholds to Rule Out Myocardial Infarction at Presentation.

BACKGROUND: Myocardial infarction can be ruled out in patients with a single cardiac troponin measurement. Whether use of a uniform rule-out threshold has resulted in sex differences in care remains unclear. OBJECTIVES: The purpose of this study was to evaluate implementation of a uniform rule-out threshold in females and males with possible myocardial infarction, and to derive and validate sex-specific thresholds. METHODS: The implementation of a uniform rule-out threshold (<5 ng/L) with a high-sensitivity cardiac troponin I assay was evaluated in consecutive patients presenting with possible myocardial infarction. The proportion of low-risk patients discharged from the emergency department and incidence of myocardial infarction or cardiac death at 30 days were determined. Sex-specific thresholds were derived and validated, and proportion of female and male patients were stratified as low-risk compared with uniform threshold. RESULTS: In 16,792 patients (age 58 ± 17 years; 46% female) care was guided using a uniform threshold. This identified more female than male patients as low risk (73% vs 62%), but a similar proportion of low-risk patients were discharged from the emergency department (81% for both) with fewer than 5 (<0.1%) patients having a subsequent myocardial infarction or cardiac death at 30 days. Compared with a uniform threshold of <5 ng/L, use of sex-specific thresholds would increase the proportion of female (61.8% vs 65.9%) and reduce the proportion of male (54.8% vs 47.8%) patients identified as low risk. CONCLUSIONS: Implementation of a uniform rule-out threshold for myocardial infarction was safe and effective in both sexes. Sex-specific rule-out thresholds should be considered, but their impact on effectiveness and safety may be limited.

Machine Learning for Myocardial Infarction Compared With Guideline-Recommended Diagnostic Pathways.

BACKGROUND: Collaboration for the Diagnosis and Evaluation of Acute Coronary Syndrome (CoDE-ACS) is a validated clinical decision support tool that uses machine learning with or without serial cardiac troponin measurements at a flexible time point to calculate the probability of myocardial infarction (MI). How CoDE-ACS performs at different time points for serial measurement and compares with guideline-recommended diagnostic pathways that rely on fixed thresholds and time points is uncertain. METHODS: Patients with possible MI without ST-segment-elevation were enrolled at 12 sites in 5 countries and underwent serial high-sensitivity cardiac troponin I concentration measurement at 0, 1, and 2 hours. Diagnostic performance of the CoDE-ACS model at each time point was determined for index type 1 MI and the effectiveness of previously validated low- and high-probability scores compared with guideline-recommended European Society of Cardiology (ESC) 0/1-hour, ESC 0/2-hour, and High-STEACS (High-Sensitivity Troponin in the Evaluation of Patients With Suspected Acute Coronary Syndrome) pathways. RESULTS: In total, 4105 patients (mean age, 61 years [interquartile range, 50-74]; 32% women) were included, among whom 575 (14%) had type 1 MI. At presentation, CoDE-ACS identified 56% of patients as low probability, with a negative predictive value and sensitivity of 99.7% (95% CI, 99.5%-99.9%) and 99.0% (98.6%-99.2%), ruling out more patients than the ESC 0-hour and High-STEACS (25% and 35%) pathways. Incorporating a second cardiac troponin measurement, CoDE-ACS identified 65% or 68% of patients as low probability at 1 or 2 hours, for an identical negative predictive value of 99.7% (99.5%-99.9%); 19% or 18% as high probability, with a positive predictive value of 64.9% (63.5%-66.4%) and 68.8% (67.3%-70.1%); and 16% or 14% as intermediate probability. In comparison, after serial measurements, the ESC 0/1-hour, ESC 0/2-hour, and High-STEACS pathways identified 49%, 53%, and 71% of patients as low risk, with a negative predictive value of 100% (99.9%-100%), 100% (99.9%-100%), and 99.7% (99.5%-99.8%); and 20%, 19%, or 29% as high risk, with a positive predictive value of 61.5% (60.0%-63.0%), 65.8% (64.3%-67.2%), and 48.3% (46.8%-49.8%), resulting in 31%, 28%, or 0%, who require further observation in the emergency department, respectively. CONCLUSIONS: CoDE-ACS performs consistently irrespective of the timing of serial cardiac troponin measurement, identifying more patients as low probability with comparable performance to guideline-recommended pathways for MI. Whether care guided by probabilities can improve the early diagnosis of MI requires prospective evaluation. REGISTRATION: URL: https://www.clinicaltrials.gov; Unique identifier: NCT00470587.

Implementation of a high sensitivity cardiac troponin I assay and risk of myocardial infarction or death at five years: observational analysis of a stepped wedge, cluster randomised controlled trial.

OBJECTIVE: To evaluate the impact of implementing a high sensitivity assay for cardiac troponin I on long term outcomes in patients with suspected acute coronary syndrome. DESIGN: Secondary observational analysis of a stepped wedge, cluster randomised controlled trial. SETTING: 10 secondary and tertiary care centres in Scotland, UK. PARTICIPANTS: 48 282 consecutive patients with suspected acute coronary syndrome. Myocardial injury was defined as any high sensitivity assay result for cardiac troponin I >99th centile of 16 ng/L in women and 34 ng/L in men. INTERVENTION: Hospital sites were randomly allocated to either early (n=5 hospitals) or late (n=5 hospitals) implementation of a high sensitivity cardiac troponin I assay with sex specific diagnostic thresholds. MAIN OUTCOME MEASURE: The main outcome was myocardial infarction or death at five years. RESULTS: 10 360 patients had cardiac troponin concentrations greater than the 99th centile, of whom 1771 (17.1%) were reclassified by the high sensitivity assay. The five year incidence of subsequent myocardial infarction or death before and after implementation of the high sensitivity assay was 29.4% (5588/18 978) v 25.9% (7591/29 304), respectively, in all patients (adjusted hazard ratio 0.97, 95% confidence interval 0.93 to 1.01), and 63.0% (456/720) v 53.9% (567/1051), respectively, in those reclassified by the high sensitivity assay (0.82, 0.72 to 0.94). After implementation of the high sensitivity assay, a reduction in subsequent myocardial infarction or death was observed in patients with non-ischaemic myocardial injury (0.83, 0.75 to 0.91) but not in those with type 1 or type 2 myocardial infarction (0.92, 0.83 to 1.01 and 0.98, 0.84 to 1.14). CONCLUSIONS: Implementation of a high sensitivity cardiac troponin I assay in the assessment of patients with suspected acute coronary syndrome was associated with a reduced risk of subsequent myocardial infarction or death at five years in those reclassified by the high sensitivity assay. Improvements in outcome were greatest in patients with non-ischaemic myocardial injury, suggesting a broader benefit beyond the identification of myocardial infarction. TRIAL REGISTRATION: ClinicalTrials.gov NCT01852123.

High-Sensitivity Cardiac Troponin for Risk Assessment in Patients With Chronic Coronary Artery Disease.

BACKGROUND: Cardiac troponin is used for risk stratification of patients with acute coronary syndromes; however, the role of testing in other settings remains unclear. OBJECTIVES: The aim of this study was to evaluate whether cardiac troponin testing could enhance risk stratification in patients with chronic coronary artery disease independent of disease severity and conventional risk measures. METHODS: In a prospective cohort of consecutive patients with symptoms suggestive of stable angina attending for outpatient coronary angiography, high-sensitivity cardiac troponin I was measured before angiography, and clinicians were blinded to the results. The primary outcome was myocardial infarction or cardiovascular death during follow-up. RESULTS: In 4,240 patients (age 66 years [IQR: 59-73 years], 33% female), coronary artery disease was identified in 3,888 (92%) who had 255 (6%) primary outcome events during a median follow-up of 2.4 years (IQR: 1.3-3.6 years). In patients with coronary artery disease, troponin concentrations were 2-fold higher in those with an event compared with those without (6.7 ng/L [IQR: 3.2-14.2 ng/L] vs 3.3 ng/L [IQR: 1.7-6.6 ng/L]; P < 0.001). Troponin concentrations were associated with the primary outcome after adjusting for cardiovascular risk factors and coronary artery disease severity (adjusted HR: 2.3; 95% CI: 1.7-3.0, log10 troponin; P < 0.001). A troponin concentration >10 ng/L identified patients with a 50% increase in the risk of myocardial infarction or cardiovascular death. CONCLUSIONS: In patients with chronic coronary artery disease, cardiac troponin predicts risk of myocardial infarction or cardiovascular death independent of cardiovascular risk factors and disease severity. Further studies are required to evaluate whether routine testing could inform the selection of high-risk patients for treatment intensification. (Myocardial Injury in Patients Referred for Coronary Angiography [MICA]; ISRCTN15620297).

Troponin in acute chest pain to risk stratify and guide effective use of computed tomography coronary angiography (TARGET-CTCA): a randomised controlled trial.

BACKGROUND: The majority of patients with suspected acute coronary syndrome presenting to the emergency department will be discharged once myocardial infarction has been ruled out, although a proportion will have unrecognised coronary artery disease. In this setting, high-sensitivity cardiac troponin identifies those at increased risk of future cardiac events. In patients with intermediate cardiac troponin concentrations in whom myocardial infarction has been ruled out, this trial aims to investigate whether outpatient computed tomography coronary angiography (CTCA) reduces subsequent myocardial infarction or cardiac death. METHODS: TARGET-CTCA is a multicentre prospective randomised open label with blinded endpoint parallel group event driven trial. After myocardial infarction and clear alternative diagnoses have been ruled out, participants with intermediate cardiac troponin concentrations (5 ng/L to 99th centile upper reference limit) will be randomised 1:1 to outpatient CTCA plus standard of care or standard of care alone. The primary endpoint is myocardial infarction or cardiac death. Secondary endpoints include clinical, patient-centred, process and cost-effectiveness. Recruitment of 2270 patients will give 90% power with a two-sided P value of 0.05 to detect a 40% relative risk reduction in the primary endpoint. Follow-up will continue until 97 primary outcome events have been accrued in the standard care arm with an estimated median follow-up of 36 months. DISCUSSION: This randomised controlled trial will determine whether high-sensitivity cardiac troponin-guided CTCA can improve outcomes and reduce subsequent major adverse cardiac events in patients presenting to the emergency department who do not have myocardial infarction. TRIAL REGISTRATION: ClinicalTrials.gov Identifier: NCT03952351. Registered on May 16, 2019.

Machine learning for diagnosis of myocardial infarction using cardiac troponin concentrations.

Although guidelines recommend fixed cardiac troponin thresholds for the diagnosis of myocardial infarction, troponin concentrations are influenced by age, sex, comorbidities and time from symptom onset. To improve diagnosis, we developed machine learning models that integrate cardiac troponin concentrations at presentation or on serial testing with clinical features and compute the Collaboration for the Diagnosis and Evaluation of Acute Coronary Syndrome (CoDE-ACS) score (0-100) that corresponds to an individual's probability of myocardial infarction. The models were trained on data from 10,038 patients (48% women), and their performance was externally validated using data from 10,286 patients (35% women) from seven cohorts. CoDE-ACS had excellent discrimination for myocardial infarction (area under curve, 0.953; 95% confidence interval, 0.947-0.958), performed well across subgroups and identified more patients at presentation as low probability of having myocardial infarction than fixed cardiac troponin thresholds (61 versus 27%) with a similar negative predictive value and fewer as high probability of having myocardial infarction (10 versus 16%) with a greater positive predictive value. Patients identified as having a low probability of myocardial infarction had a lower rate of cardiac death than those with intermediate or high probability 30 days (0.1 versus 0.5 and 1.8%) and 1 year (0.3 versus 2.8 and 4.2%; P < 0.001 for both) from patient presentation. CoDE-ACS used as a clinical decision support system has the potential to reduce hospital admissions and have major benefits for patients and health care providers.

Rationale and design of integrating a parents first obesity intervention with a pediatric weight management intervention for rural families - Evaluating the ripple effect.

Rural families are disproportionately affected by obesity. Obesity often runs in families and is impacted by hereditary components, the shared home environment, and parent modeling/child observational learning. Moreover, parent changes in weight predict child changes in weight. Thus, targeting the family unit has the potential to enhance outcomes for adults and children simultaneously. Additionally, engaging rural nurses in medical clinics and schools may be important in determining whether rural telehealth programs are successfully implemented and sustained. This paper describes the rationale and design of a randomized control trial (RCT) evaluating the effectiveness of an integrated adult- and child-focused obesity treatment tailored for rural participants. Outcomes of this study include participant weight loss from baseline to 9-months, device-measured physical activity, and dietary intake. This project will additionally compare reach between clinic and school settings and evaluate the impact of nurse engagement. This study will include 240 participants from eight rural communities who will be randomized to either a Parent +Family-based group or a Newsletter +Family-based group. Parents in the Parent +Family-based group will receive a 3-month adult obesity treatment designed for adult behavior change as a first step. Then, parents and children together will enter the family-based program (iAmHealthy), allowing for potential enhancement of a theorized ripple effect. Parents in the Newsletter +Family-based group will receive 3 monthly newsletters and then participate in the 6-month family-based intervention designed for child behavior change. This study is the first RCT to examine the effectiveness of an integrated adult- and child-focused obesity treatment program. Registered with ClinicalTrials.gov NCT ID NCT05612971.

Coronary Artery and Cardiac Disease in Patients With Type 2 Myocardial Infarction: A Prospective Cohort Study.

BACKGROUND: Type 2 myocardial infarction is caused by myocardial oxygen supply-demand imbalance, and its diagnosis is increasingly common with the advent of high-sensitivity cardiac troponin assays. Although this diagnosis is associated with poor outcomes, widespread uncertainty and confusion remain among clinicians as to how to investigate and manage this heterogeneous group of patients with type 2 myocardial infarction. METHODS: In a prospective cohort study, 8064 consecutive patients with increased cardiac troponin concentrations were screened to identify patients with type 2 myocardial infarction. We excluded patients with frailty or renal or hepatic failure. All study participants underwent coronary (invasive or computed tomography angiography) and cardiac (magnetic resonance or echocardiography) imaging, and the underlying causes of infarction were independently adjudicated. The primary outcome was the prevalence of coronary artery disease. RESULTS: In 100 patients with a provisional diagnosis of type 2 myocardial infarction (median age, 65 years [interquartile range, 55-74 years]; 43% women), coronary and cardiac imaging reclassified the diagnosis in 7 patients: type 1 or 4b myocardial infarction in 5 and acute myocardial injury in 2 patients. In those with type 2 myocardial infarction, median cardiac troponin I concentrations were 195 ng/L (interquartile range, 62-760 ng/L) at presentation and 1165 ng/L (interquartile range, 277-3782 ng/L) on repeat testing. The prevalence of coronary artery disease was 68% (63 of 93), which was obstructive in 30% (28 of 93). Infarct-pattern late gadolinium enhancement or regional wall motion abnormalities were observed in 42% (39 of 93), and left ventricular systolic dysfunction was seen in 34% (32 of 93). Only 10 patients had both normal coronary and normal cardiac imaging. Coronary artery disease and left ventricular systolic dysfunction were previously unrecognized in 60% (38 of 63) and 84% (27 of 32), respectively, with only 33% (21 of 63) and 19% (6 of 32) on evidence-based treatments. CONCLUSIONS: Systematic coronary and cardiac imaging of patients with type 2 myocardial infarction identified coronary artery disease in two-thirds and left ventricular systolic dysfunction in one-third of patients. Unrecognized and untreated coronary or cardiac disease is seen in most patients with type 2 myocardial infarction, presenting opportunities for initiation of evidence-based treatments with major potential to improve clinical outcomes. REGISTRATION: URL: https://www. CLINICALTRIALS: gov; Unique identifier: NCT03338504.

High-Sensitivity Cardiac Troponin on Presentation to Rule Out Myocardial Infarction: A Stepped-Wedge Cluster Randomized Controlled Trial.

BACKGROUND: High-sensitivity cardiac troponin assays enable myocardial infarction to be ruled out earlier, but the safety and efficacy of this approach is uncertain. We investigated whether an early rule-out pathway is safe and effective for patients with suspected acute coronary syndrome. METHODS: We performed a stepped-wedge cluster randomized controlled trial in the emergency departments of 7 acute care hospitals in Scotland. Consecutive patients presenting with suspected acute coronary syndrome between December 2014 and December 2016 were included. Sites were randomized to implement an early rule-out pathway where myocardial infarction was excluded if high-sensitivity cardiac troponin I concentrations were <5 ng/L at presentation. During a previous validation phase, myocardial infarction was ruled out when troponin concentrations were <99th percentile at 6 to 12 hours after symptom onset. The coprimary outcome was length of stay (efficacy) and myocardial infarction or cardiac death after discharge at 30 days (safety). Patients were followed for 1 year to evaluate safety and other secondary outcomes. RESULTS: We enrolled 31 492 patients (59±17 years of age [mean±SD]; 45% women) with troponin concentrations <99th percentile at presentation. Length of stay was reduced from 10.1±4.1 to 6.8±3.9 hours (adjusted geometric mean ratio, 0.78 [95% CI, 0.73-0.83]; P<0.001) after implementation and the proportion of patients discharged increased from 50% to 71% (adjusted odds ratio, 1.59 [95% CI, 1.45-1.75]). Noninferiority was not demonstrated for the 30-day safety outcome (upper limit of 1-sided 95% CI for adjusted risk difference, 0.70% [noninferiority margin 0.50%]; P=0.068), but the observed differences favored the early rule-out pathway (0.4% [57/14 700] versus 0.3% [56/16 792]). At 1 year, the safety outcome occurred in 2.7% (396/14 700) and 1.8% (307/16 792) of patients before and after implementation (adjusted odds ratio, 1.02 [95% CI, 0.74-1.40]; P=0.894), and there were no differences in hospital reattendance or all-cause mortality. CONCLUSIONS: Implementation of an early rule-out pathway for myocardial infarction reduced length of stay and hospital admission. Although noninferiority for the safety outcome was not demonstrated at 30 days, there was no increase in cardiac events at 1 year. Adoption of this pathway would have major benefits for patients and health care providers. Registration: URL: https://www.clinicaltrials.gov; Unique identifier: NCT03005158.

Correction to: Osteoarthritis Preoperative Package for care of Orthotics, Rehabilitation, Topical and oral agent Usage and Nutrition to Improve ouTcomes at a Year (OPPORTUNITY); a feasibility study protocol for a randomised controlled trial.

After publication of our article [1] we have been notified that two of the author names have been mistakenly removed from the authorship list: Colin R. Howie and Nicholas D. Clement.

Osteoarthritis Preoperative Package for care of Orthotics, Rehabilitation, Topical and oral agent Usage and Nutrition to Improve ouTcomes at a Year (OPPORTUNITY); a feasibility study protocol for a randomised controlled trial.

BACKGROUND: Patients' pre-operative health and physical function is known to influence their post-operative outcomes. In patients with knee osteoarthritis, pharmacological and non-pharmacological options are often not optimised prior to joint replacement. This results in some patients undergoing surgery when they are not as fit as they could be. The aim of this study is to assess the feasibility and acceptability of a pre-operative package of non-operative care versus standard care prior to joint replacement. METHODS/DESIGN: This is a multicentre, randomised controlled feasibility trial of patients undergoing primary total knee replacement for osteoarthritis. Sixty patients will be recruited and randomised (2:1) to intervention or standard care arms. Data will be collected at baseline (before the start of the intervention), around the end of the intervention period and a minimum of 90 days after the planned date of surgery. Adherence will be reviewed each week during the intervention period (by telephone or in person). Participants will be randomised to a pre-operative package of non-operative care or standard care. The non-operative care will consist of (1) a weight-loss programme, (2) a set of exercises, (3) provision of advice on analgesia use and (4) provision of insoles. The intervention will be started as soon as possible after patients have been added to the waiting list for joint replacement surgery to take advantage of the incentive for behavioural change that this will create. The primary outcomes of this study are feasibility outcomes which will indicate whether the intervention and study protocol is feasible and acceptable and whether a full-scale effectiveness trial is warranted. The following will be measured and used to inform study feasibility: rate of recruitment, rate of retention at 90-day follow-up review after planned surgery date, and adherence to the intervention estimated through review questionnaires and weight change (for those receiving the weight-loss aspect of intervention). In addition the following information will be assessed qualitatively: analysis of qualitative interviews exploring acceptability, feasibility, adherence and possible barriers to implementing the intervention, and acceptability of the different outcome measures. DISCUSSION: The aims of the study specifically relate to testing the feasibility and acceptability of the proposed effectiveness trial intervention and the feasibility of the trial methods. This study forms the important first step in developing and assessing whether the intervention has the potential to be assessed in a future fully powered effectiveness trial. The findings will also be used to refine the design of the effectiveness trial. TRIAL REGISTRATION: ISRCTN registry, ID: ISRCTN96684272. Registered on 18 April 2018.

Sex-Specific Thresholds of High-Sensitivity Troponin in Patients With Suspected Acute Coronary Syndrome.

BACKGROUND: Major disparities between women and men in the diagnosis, management, and outcomes of acute coronary syndrome are well recognized. OBJECTIVES: The aim of this study was to evaluate the impact of implementing a high-sensitivity cardiac troponin I assay with sex-specific diagnostic thresholds for myocardial infarction in women and men with suspected acute coronary syndrome. METHODS: Consecutive patients with suspected acute coronary syndrome were enrolled in a stepped-wedge, cluster-randomized controlled trial across 10 hospitals. Myocardial injury was defined as high-sensitivity cardiac troponin I concentration >99th centile of 16 ng/l in women and 34 ng/l in men. The primary outcome was recurrent myocardial infarction or cardiovascular death at 1 year. RESULTS: A total of 48,282 patients (47% women) were included. Use of the high-sensitivity cardiac troponin I assay with sex-specific thresholds increased myocardial injury in women by 42% and in men by 6%. Following implementation, women with myocardial injury remained less likely than men to undergo coronary revascularization (15% vs. 34%) and to receive dual antiplatelet (26% vs. 43%), statin (16% vs. 26%), or other preventive therapies (p < 0.001 for all). The primary outcome occurred in 18% (369 of 2,072) and 17% (488 of 2,919) of women with myocardial injury before and after implementation, respectively (adjusted hazard ratio: 1.11; 95% confidence interval: 0.92 to 1.33), compared with 18% (370 of 2,044) and 15% (513 of 3,325) of men (adjusted hazard ratio: 0.85; 95% confidence interval: 0.71 to 1.01). CONCLUSIONS: Use of sex-specific thresholds identified 5 times more additional women than men with myocardial injury. Despite this increase, women received approximately one-half the number of treatments for coronary artery disease as men, and outcomes were not improved. (High-Sensitivity Troponin in the Evaluation of Patients With Acute Coronary Syndrome [High-STEACS]; NCT01852123).

Water-based 3D inkjet printing of an oral pharmaceutical dosage form.

Inkjet printing is a form of additive manufacturing where liquid droplets are selectively deposited onto a substrate followed by solidification. The process provides significant potential advantages for producing solid oral dosage forms or tablets, including a reduction in the number of manufacturing steps as well as the ability to tailor a unique dosage regime to an individual patient. This study utilises solvent inkjet printing to print tablets through the use of a Fujifilm Dimatix printer. Using polyvinylpyrrolidone and thiamine hydrochloride (a model excipient and drug, respectively), a water-based ink formulation was developed to exhibit reliable and effective jetting properties. Tablets were printed on polyethylene terephthalate films where solvent evaporation in the ambient environment was the solidification mechanism. The tablets were shown to contain a drug loading commensurate with the composition of the ink, in its preferred polymorphic phase of a non-stoichiometric hydrate distributed homogenously. The printed tablets displayed rapid drug release. This paper illustrates solvent inkjet printing's ability to print entire free-standing tablets without an edible substrate being part of the tablet and the use of additional printing methods. Common problems with solvent-based inkjet printing, such as the use toxic solvents, are avoided. The strategy developed here for tablet manufacturing from a suitable ink is general and provides a framework for the formulation for any drug that is soluble in water.

Selective recrystallization of cellulose composite powders and microstructure creation through 3D binder jetting.

Binder jetting is an additive manufacturing technique in which powdered material is sequentially laid down and printed on by an ink binder, in a selective manner, to form a 3D object. Unfortunately work in this area relevant to food materials is largely unpublished, however a typical application of this technique is sugar powder bound by a water and alcohol based ink with optional colour or flavour demonstrated by commercial ventures. In this work we demonstrate the use of a small scale powder layering device under an ink jet printer to test prototype powders prior to producing quantities typically used in commercially available binder jetting machines. Powders comprising predominantly of ball milled, amorphous cellulose were successfully used to create 3D structures when interacting polysaccharides were present in the ink (xanthan gum) and as a proportion of the powder component (glucomannan) by inducing selective recrystallization. These ingredients are categorized as dietary fibre, thus such formulations can be used to create low-calorie 3D printed food designs to be used within food products.

Fluid Gels: a New Feedstock for High Viscosity Jetting.

Suspensions of gel particles which are pourable or spoonable at room temperature can be created by shearing a gelling biopolymer through its gelation (thermal or ion mediated) rather than allowing quiescent cooling - thus the term 'fluid gel' may be used to describe the resulting material. As agar gelation is thermoreversible this type of fluid gel is able to be heated again to melt agar gel particles to varying degrees then re-form a network quiescently upon cooling, whose strength depends on the temperature of re-heating, determining the amount of agar solubilised and subsequently able to partake in re-gelation. Using this principle, for the first time fluid gels have been applied to a high viscosity 3D printing process wherein the printing temperature (at the nozzle) is controllable. This allows the use of ambient temperature feedstocks and by altering the nozzle temperature, the internal nature (presence or absence of gel particles) and gel strength of printed droplets differs. If the nozzle prints at different temperatures for each layer a structure with modulated texture could be created.

Using Laser Ultrasound to Detect Subsurface Defects in Metal Laser Powder Bed Fusion Components.

Laser powder bed fusion offers many advantages over conventional manufacturing methods, such as the integration of multiple parts that can result in significant weight-savings. The increased design freedom that layer-wise manufacture allows has also been seen to enhance component performance at little or no added cost. For such benefits to be realized, however, the material quality must first be assured. Laser ultrasonic testing is a noncontact inspection technique that has been proposed as suitable for in situ monitoring of metal additive manufacturing processes. This article explores the current capability of this technique to detect manufactured, subsurface defects in Ti-6Al-4V samples, ex situ. The results are compared with x-ray computed tomography reconstructions and focus variation microscopy. Although laser ultrasound has been used to identify material discontinuities, further work is required before this technique could be implemented in situ.

3D printing of tablets using inkjet with UV photoinitiation.

Additive manufacturing (AM) offers significant potential benefits in the field of drug delivery and pharmaceutical/medical device manufacture. Of AM processes, 3D inkjet printing enables precise deposition of a formulation, whilst offering the potential for significant scale up or scale out as a manufacturing platform. This work hypothesizes that suitable solvent based ink formulations can be developed that allow the production of solid dosage forms that meet the standards required for pharmaceutical tablets, whilst offering a platform for flexible and personalized manufacture. We demonstrate this using piezo-activated inkjetting to 3D print ropinirole hydrochloride. The tablets produced consist of a cross-linked poly(ethylene glycol diacrylate) (PEGDA) hydrogel matrix containing the drug, photoinitiated in a low oxygen environment using an aqueous solution of Irgacure 2959. At a Ropinirole HCl loading of 0.41mg, drug release from the tablet is shown to be Fickian. Raman and IR spectroscopy indicate a high degree of cross-linking and formation of an amorphous solid dispersion. This is the first publication of a UV inkjet 3D printed tablet. Consequently, this work opens the possibility for the translation of scalable, high precision and bespoke ink-jet based additive manufacturing to the pharmaceutical sector.

An Investigation of the Behavior of Solvent based Polycaprolactone ink for Material Jetting.

An initial study of processing bioresorbable polycaprolactone (PCL) through material jetting was conducted using a Fujifilm Dimatix DMP-2830 material printer. The aim of this work was to investigate a potential solvent based method of jetting polycaprolactone. Several solvents were used to prepare a PCL solvent based ink and 1, 4-dioxane was chosen with the consideration of both solubility and safety. The morphology of PCL formed under different substrate temperatures, droplet spacings were investigated. Multi-layer PCL structures were printed and characterized. This work shows that biodegradable polycaprolactone can be processed through material jetting.

Targeted rehabilitation to improve outcome after total knee replacement (TRIO): study protocol for a randomised controlled trial.

BACKGROUND: Approximately 20% of patients are not satisfied with the outcome of total knee replacement, great volumes of which are carried out yearly. Physiotherapy is often provided by the NHS to address dysfunction following knee replacement; however the efficacy of this is unknown. Although clinically it is accepted that therapy is useful, provision of physiotherapy to all patients post-operatively does not enhance outcomes at one year. No study has previously assessed the effect of targeting therapy to individuals struggling to recover in the early post-operative phase.The aim of the TRIO study is to determine whether stratifying care by targeting physiotherapy to those individuals performing poorly following knee replacement is effective in improving the one year outcomes. We are also investigating whether the structure of the physiotherapy provision itself influences outcomes. METHODS/DESIGN: The study is a multi-centre prospective randomised controlled trial (RCT) of patients undergoing primary total knee replacement, with treatment targeted at those deemed most susceptible to gain from it. Use of the national PROMS programme for pre-operative data collection allows us to screen all patients at initial post-operative clinical review, and recruit only those deemed to be recovering slowly.We aim to recruit 440 patients through various NHS orthopaedic centres who will undergo six weeks of physiotherapy. The intervention will be either 'intensive' involving both hospital and home-based functional exercise rehabilitation, or 'standard of care' consisting of home exercises. Patients will be randomised to either group using a web-based system. Both groups will receive pre and post-intervention physiotherapy review. Patients will be followed-up to one year post-operation. The primary outcome measure is the Oxford Knee Score. Secondary outcomes are patient satisfaction, functional ability, pain scores and cost-effectiveness. TRIAL REGISTRATION: Current Controlled Trials ISRCTN23357609. ClinicalTrials.gov NCT01849445.