RESUMEN
Background/purpose: Dental implants have been a popular treatment for replacing missing teeth. The purpose of this study was to investigate the impact of engaging (hexagonal) and non-engaging (non-hexagonal) abutments in various six-unit fixed prosthesis on the stress distribution and loading located in the implant neck, implant abutment, and surrounding bone. Materials and methods: Three implants were digitally designed and inserted parallel to each other in edentulous sites of the maxillary right canine, maxillary right central incisor, and maxillary left canine. Titanium base engaging abutments, non-engaging abutments and connecting screws were designed. Five distinct models of 6-unit fixed dental prosthesis were created, each featuring different combinations of various abutments. Forces (45-degree angle) were applied to the prosthesis, allowing for the analysis of the stress distribution on the implant neck and abutments, and the maximum and minimum principal stress values on the cortical and trabecular bone. Results: Von Mises stress values and stress distributions located in the implant neck region due to the applied loading forces were analyzed. The overall stress values were highest while employing the hexagonal abutments. The maxillary left canine with a hexagonal abutment (model 5) reported the highest von mises value (64.71 MPa) while the maxillary right canine with a non-hexagonal abutment (model 4) presented lowest von mises value (56.69 MPa). Conclusion: The results suggest that both the various abutment combinations (engaging and non-engaging) on five different models have a similar influence on the distribution of stress within the implant system.
RESUMEN
Background/purpose: Effects of implant angulation on digital impression accuracy remain controversial. The purpose of this study was to assess the relationship between the alteration of implant scan bodies and the trueness of digital impressions. Materials and methods: A maxillary typodont without the right premolars and first molar was scanned with a laboratory scanner and saved as a standard triangular language (STL) file. A model from the STL file was fabricated with a 3-dimensional printer. Two implants were placed into the first premolar and first molar sites of the model, followed by the insertion of two scan bodies onto the implants. These scan bodies were divided into four test groups, based on the surface modifications. A digital impression of each typodont was made with three different intraoral scanners. An abutment was digitally seated on each implant. 120 STL files (30 for each group) of the typodont with two implants and two corresponding abutments were used for statistical analysis. Results: A total of 240 values (two implants for each typodont) were obtained after each sample (4 groups) was scanned 10 times by utilizing three intraoral scanners. The overall linear and angular discrepancies were analyzed. Group 1 showed the lowest linear discrepancy of 14.9 ± 5.4 µm while Group 4 reported the highest linear discrepancy of 137.5 ± 41.7 µm, yielding a statistical significance (P < 0.05). Conclusion: It has been concluded that the more adjustments made to the scan bodies, the greater the linear and angular deviations occur, compromising the trueness of the digital implant impression.
RESUMEN
PURPOSE: To assess the marginal and internal fit of monolithic zirconia fixed dental prostheses (FDPs) comparing two different intraoral scanners (IOSs) and assessment methods. MATERIALS AND METHODS: A maxillary typodont with three prepared teeth allowed fabrication of five-unit high-translucency monolithic zirconia FDPs. The typodont was scanned with two IOSs: Cerec Omnicam and 3Shape TRIOS 3. In total, 30 FDPs were milled from presintered high-translucency zirconia blocks. Dual-scan and silicone replica assessments were used to determine marginal and internal gaps. RESULTS: A statistical significance was observed for marginal gaps (3Shape [74.27 ± 10.4 µm] and Cerec [86.45 ± 14.3 µm]) and for internal gaps (3Shape [126.12 ± 12.7 µm] and Cerec [112.38 ± 17.2 µm]). CONCLUSIONS: The outcomes of this study showed that the 3Shape TRIOS 3 produced a better overall marginal fit, while the Cerec Omnicam created a better internal fit. Additionally, a greater overall marginal and internal gap was noted with the silicone replica method over the dual-scan method.
Asunto(s)
Prótesis Dental , SiliconasRESUMEN
Purpose: To assess and quantify survival rates and marginal bone levels (MBLs) of implants placed using guided surgery with a flapless approach vs traditional flap elevation. Materials and Methods: An electronic literature search was conducted in PubMed and the Cochrane Library and refereed by two independent reviewers. Data were synthesized for MBL and survival rates for "flapless" vs traditional "flap" implant placement approach groups. Meta-analyses and nonparametric tests for differences between groups were performed. Rates and types of complications were compiled. The study was conducted under PRISMA 2020 guidelines. Results: A total of 868 records were screened. Full-text review of 109 articles resulted in a total of 57 included studies (50 included for quantitative synthesis and analysis). The survival rate was 97.4% (95% CI: 96.7%, 98.1%) for the flapless approach vs 95.8% (95% CI: 93.3%, 98.2%) for the flap approach; weighted Wilcoxon rank sum test for significance was P = .2339. MBL for the flapless approach was 0.96 mm (95% CI: 0.754, 1.16) vs 0.49 mm (95% CI: 0.30, 0.68) for the flap approach; weighted Wilcoxon rank sum test for significance was P = .0495. Conclusion: The outcomes of this review have suggested that surgical guided implant placement can be used as a reliable method regardless of approach. Additionally, flap and flapless approaches provided similar implant survival rates, but the flap technique provided a slightly better MBL than the flapless approach.
Asunto(s)
Implantes Dentales , Colgajos QuirúrgicosRESUMEN
Background/purpose: Recent advancements in dental technology has led clinicians to convert from traditional methods to digital workflows. The purpose of this study was to analyze the effect of various finish line designs and occlusal morphologies on the accuracy of digital impressions. Materials and methods: Six maxillary molar crown preparations were designed by using a digital sculpting software program. The samples differed in finish line design and occlusal surface morphology. Three different finish line designs (shoulder, chamfer, and shoulder with internal round angle) and two different occlusal morphologies (sharp and rounded) were used, giving six groups. Using three different intraoral scanners, each group was scanned and compared with a reference scan obtained from an industrial scanner. The accuracy of each scan was studied, and the data were statistically analyzed. Results: A total of 180 scans were acquired by utilizing three different intraoral scanners. The reference scan was compared with the scans from each group and overall differences (marginal, axial, and occlusal) were assessed. A crown preparation with a chamfer finish line showed the lowest marginal discrepancy of 13.2 ± 4.18 µm while preparation with a shoulder finish line reported the highest discrepancy of 34.8 ± 7.9 µm (P < 0.05). Also, the occlusal discrepancies of the samples with rounded and sharp occlusal morphologies were 12.55 ± 3.09 µm and 19.13 ± 2.3 µm, respectively (P < 0.05). Conclusion: It has been suggested that chamfer finish line design and rounded occlusal anatomy may produce more accurate digital impression for single crown restorations.
RESUMEN
Background/purpose: Digital impressions using intraoral scanners have recently gained popularity. The aim of the present study was to evaluate the fit of full-arch screw-retained cobalt-chromium frameworks fabricated via two different digital impression methods. Materials and methods: An edentulous resin master model with four dental implants was fabricated. Forty cobalt-chromium superstructures were fabricated and evaluated according to four groups. In Group 1, the superstructures were evaluated using an intraoral scanner to generate digital impressions. Group 2 relied on the help of an auxiliary geometric appliance in generation of digital impressions via intraoral scanner. The traditional method of splinted open-tray conventional impressions was designated for Group 3. Finally, the control group (Group 4) relied on scanning of the master model directly with a laboratory scanner. Vertical marginal discrepancy was evaluated, and data obtained were statistically analyzed. Results: The highest mean vertical marginal gap value (80.86 ± 50.06 µm) was observed for Group 1 and statistically higher than Group 2, 3, and 4 (P < 0.05). The lowest mean vertical marginal gap value (41.98 ± 26.33 µm) was measured from Group 4 and statistically similar to Group 2 and 3 (P > 0.05). Conclusion: It has been suggested that the use of auxiliary geometric appliances yields increased scanning accuracy. Frameworks fabricated using the traditional splinted open-tray technique were more reliable compared to those frameworks from digital impressions.
RESUMEN
This report presents a clinical case that follows a comprehensive digital workflow to increase occlusal vertical dimension of a patient presenting with occlusal wear. A 56-year-old patient with aesthetic and functional problems presented to the authors' clinic. An intraoral scanner was used to obtain digital models of the patient's existing maxillary and mandibular arches. Advanced sculpting software and digital tooth libraries were used to design the patient's ideal smile. A three-dimensional (3D) printer was used to fabricate temporary restorations and resin casts. Full-mouth restoration was successfully completed with zirconia crowns using an advanced digital workflow.
Asunto(s)
Diseño Asistido por Computadora , Estética Dental , Humanos , Persona de Mediana Edad , Flujo de Trabajo , Dimensión Vertical , Coronas , Diseño de Prótesis Dental/métodosRESUMEN
PURPOSE: A range of materials for single-tooth computer-aided design and computer-aided manufacturing (CAD-CAM) restorations have been introduced that may affect CAM accuracy. This study aimed to review articles evaluating marginal and internal fit of lithium disilicate (LD) and zirconia (Z) crowns fabricated by CAD-CAM systems using intraoral optical scanners (IOS). MATERIALS AND METHODS: Under the guidelines of Preferred Reporting Items for Systematic Reviews and Meta-analysis (PRISMA), a systematic review was performed along with an electronic article search in the Medline/Pubmed database. The articles were limited to those in the English language that were published within the past ten years. RESULTS: The initial search resulted in 50 articles and of those, a total of 18 articles were selected for full-text review following abstract evaluation. Eight articles that did not meet the inclusion criteria were excluded and the remaining ten articles, which provided internal and marginal gap values, were used in this review. For LD crowns, marginal gap values ranged between 45µm and 190.2µm. For Z crowns, the values varied between 39µm and 126.4µm. For LD crowns, the internal gap values were between 57.8µm and 475.4µm, and for Z crowns, the values were between 79µm and 205.8µm. CONCLUSION: The outcome of this review suggests that clinically acceptable marginal and internal fit can be attained with LD and Z all-ceramic CAD-CAM crowns using digital impressions. Additionally, it has been found that LD and Z ceramics provide similar marginal gap values, but LD material provides better internal fit than Z.
Asunto(s)
Adaptación Marginal Dental , Diseño de Prótesis Dental , Humanos , Diseño de Prótesis Dental/métodos , Porcelana Dental , Cerámica , Coronas , Diseño Asistido por ComputadoraRESUMEN
Background/purpose: Zirconia has recently become a popular material for fixed restorations. The purpose of this study was to use a digital workflow to fabricate monolithic zirconia fixed dental prostheses (FDPs) and assess the connection between variable connector sizes compared to their clinical performance. Materials and methods: Clinicians evaluated monolithic zirconia FDPs in 58 patients. After definitive impressions were made, stone casts were obtained. The stone casts were scanned to a standard triangle language (STL) file. A digital wax up was fabricated, and corresponding provisional restorations were milled. Final FDPs were fabricated from a high-translucent zirconia material. During digital fabrication, the connector area of each FDP was recorded while meticulous attention was paid to ensure that the connector cross-sectional area was ≥9 mm2 for the 3-unit restorations (pontic to retainer) and ≥12 mm2 for the 4-unit restorations (pontic to pontic). Biological an technical outcomes of the FDPs were performed at 1 week, 6 months and then annually for 6 consecutive years. Results: A total of 23 men and 35 women received a total of 63 full-contour zirconia FDPs in the posterior regions and were observed for a time period ranging between 50 and 70 months. No decementation occurred and no caries were detected during the observation period, however signs of gingivitis were detected in 4 patients. The dimension of the connector areas was 12 mm2 in the two broken 4-unit FDPs. Conclusion: The results of this study suggest that the use of digital scanning and milling to fabricate monolithic zirconia FDPs of posterior regions may be an acceptable alternative restorative approach to traditional metal-ceramic restorations.
RESUMEN
PURPOSE: The purpose of this systematic review was to compare the clinical performance of lithium disilicate (LDS) and zirconia (Z) single crowns manufactured by computer-aided design/computer-aided manufacturing (CAD/CAM) systems using intraoral optical scanners (IOS). MATERIALS AND METHODS: An electronic search for articles published between January 2012 and January 2022 in the English language was performed with the Medline/Pubmed database under the guidelines of Preferred Reporting Items for Systemic Reviews and Meta-analysis (PRISMA). The specific search terms used were "zirconia", "lithium disilicate", "CAD/CAM", "intraoral optical scanner", and "survival". RESULTS: The initial electronic search resulted in 278 articles. Most of the resulting articles were excluded, six clinical studies addressing the clinical outcomes of Z and LDS crowns fitted the inclusion criteria and were selected for review. Of these six studies, three were randomised controlled trials, two were retrospective studies, and one was a prospective study. To quantify the clinical performance of the crowns several parameters were recorded, including fractures, endodontic complications, periodontal complications, technical complications, aesthetic complications, and biological complications. It was noted that the most common technical complication of Z and LDS crowns was chipping at a rate of 1.4% and 5% respectively. Regarding Z crowns, aesthetic concerns were the most frequently observed complication. CONCLUSION: The outcomes of this systematic review indicate that Z and LDS crowns display a similar incidence of periodontal and endodontic complications when compared to metal-ceramic crowns, suggesting that these all-ceramic materials are viable alternatives. The incidence of chipping was higher in LDS crowns compared to other materials, while Z crowns were inferior in terms of aesthetics.
Asunto(s)
Diseño de Prótesis Dental , Litio , Humanos , Cerámica , Diseño Asistido por Computadora , Coronas , Porcelana Dental , Estudios Prospectivos , Ensayos Clínicos Controlados Aleatorios como Asunto , Estudios Retrospectivos , CirconioRESUMEN
This report describes a digital workflow and two-year follow-up of an immediately loaded implant-retained overdenture using flapless surgery and a computer-aided design/computer-aided manufacturing (CAD/CAM) surgical guide. A prosthetically-driven approach, utilising a three-dimensional (3D) planning software and a CAD/CAM surgical guide, was used to place four implants in the edentulous maxillary arch of a 59-year-old male patient. All four implants were inserted through the surgical guide without raising soft tissue flaps. After placement, the patient was delivered an immediately loaded maxillary overdenture. Surgical implant placement was well tolerated by the patient, who reported no discomfort. Following a four-month period, a new implant-retained maxillary overdenture reinforced by a metal framework was fabricated and delivered to the patient. There were no adverse issues noted with neither the implants nor the maxillary overdenture during the two-year follow up period. The technique using the workflow described in this report may be a predictable and affordable alternative in the restoration of edentulous arches as compared to full-arch fixed restorations.
Asunto(s)
Implantes Dentales , Boca Edéntula , Cirugía Asistida por Computador , Masculino , Humanos , Persona de Mediana Edad , Prótesis de Recubrimiento , Prótesis Dental de Soporte Implantado , Diseño Asistido por Computadora , Implantación Dental Endoósea/métodos , Cirugía Asistida por Computador/métodosRESUMEN
By utilising open-source digital software, clinicians can create an integrative digital workflow composed of various technological systems. This report presents a clinical case that follows a comprehensive digital workflow to improve the smile of a 42-year-old female patient. The patient presented with minor attrition of maxillary anterior teeth and discoloured, asymmetrical composite restorations on central maxillary incisors. Her smile was rehabilitated by restoring her maxillary anterior teeth with lithium disilicate ceramic veneers. A smile design system was used to create a virtual simulation of the patient's desired treatment outcome. Utilising a 3D tooth library generated by the smile design system, extra-oral photographs, and intra-oral scans of the patient's maxillary and mandibular arches, a 3D model of the proposed smile design was created in an advanced 3D sculpting software. The resin casts that were fabricated with a 3D printer were used to fabricate a mockup and sent to the laboratory as reference for the final restoration. The specific shade recipe for the ceramic veneers was obtained using a special polar eye filter and digital shade matching software. There is no doubt that advancements in digital technology are providing clinicians with limitless treatment modalities. From intra-oral scanners and smile design systems to 3D sculpting software and even digital shade matching systems, continuous technological developments are paving the way for the complete digitalisation of dentistry. This case report presents an example of this digital revolution.
Asunto(s)
Diseño Asistido por Computadora , Sonrisa , Femenino , Humanos , Adulto , Flujo de Trabajo , Cerámica/uso terapéutico , IncisivoRESUMEN
The purpose of this observational study is to evaluate the prevalence and main characteristics of bifid canals within a European adult population, analyzing cone-beam-computed tomography (CBCT). The population study examined 300 subjects. The CBCTs were performed between 2012 and 2019, using PaX-Zenith3D with a standard protocol of acquisition. The parameters analyzed were the presence and lengths of the bifid mandibular canals. The sample included 49% male and 51% female participants. The mean age of the patients was 47.07 ± 17.7 years. Anatomical variants of the mandibular canal were identified in 28.8% of the sides and 50.3% of the patients. In 7.3% of the subjects, the anatomical variants were present bilaterally. The most frequently encountered bifid canal was Type 3 (40.5%), followed by the Type 1 canal (39.3%), the Type 2 canal (14.5%), and the Type 4 canal (5.9%), 40% on the right side and 60% on the left side. The average length of the bifid canals located on the right side of the mandible was 11.96 ± 5.57 mm, compared to 11.38 ± 4.89 mm for those measured on the left side. The bifid mandibular canal is a common anatomical variation of the mandibular canal. It is fundamental to performing an accurate preoperative evaluation using CBCT analysis to avoid and/or reduce intraoperative and postoperative complications.