RESUMEN
A sustainable society requires high-energy storage devices characterized by lightness, compactness, a long life and superior safety, surpassing current battery and supercapacitor technologies. Single-walled carbon nanotubes (SWCNTs), which typically exhibit great toughness, have emerged as promising candidates for innovative energy storage solutions. Here we produced SWCNT ropes wrapped in thermoplastic polyurethane elastomers, and demonstrated experimentally that a twisted rope composed of these SWCNTs possesses the remarkable ability to reversibly store nanomechanical energy. Notably, the gravimetric energy density of these twisted ropes reaches up to 2.1 MJ kg-1, exceeding the energy storage capacity of mechanical steel springs by over four orders of magnitude and surpassing advanced lithium-ion batteries by a factor of three. In contrast to chemical and electrochemical energy carriers, the nanomechanical energy stored in a twisted SWCNT rope is safe even in hostile environments. This energy does not deplete over time and is accessible at temperatures ranging from -60 to +100 °C.
RESUMEN
Standard clinical care of neonates and the ventilation status of human patients affected with coronavirus disease involves continuous CO2 monitoring. However, existing noninvasive methods are inadequate owing to the rigidity of hard-wired devices, insubstantial gas permeability and high operating temperature. Here, we report a cost-effective transcutaneous CO2 sensing device comprising elastomeric sponges impregnated with oxidized single-walled carbon nanotubes (oxSWCNTs)-based composites. The proposed device features a highly selective CO2 sensing response (detection limit 155 ± 15 ppb), excellent permeability and reliability under a large deformation. A follow-up prospective study not only offers measurement equivalency to existing clinical standards of CO2 monitoring but also provides important additional features. This new modality allowed for skin-to-skin care in neonates and room-temperature CO2 monitoring as compared with clinical standard monitoring system operating at high temperature to substantially enhance the quality for futuristic applications.
RESUMEN
Isotopes of heavier gases including carbon (13C/14C), nitrogen (13N), and oxygen (18O) are highly important because they can be substituted for naturally occurring atoms without significantly perturbing the biochemical properties of the radiolabelled parent molecules. These labelled molecules are employed in clinical radiopharmaceuticals, in studies of brain disease and as imaging probes for advanced medical imaging techniques such as positron-emission tomography (PET). Established distillation-based isotope gas separation methods have a separation factor (S) below 1.05 and incur very high operating costs due to high energy consumption and long processing times, highlighting the need for new separation technologies. Here, we show a rapid and highly selective adsorption-based separation of 18O2 from 16O2 with S above 60 using nanoporous adsorbents operating near the boiling point of methane (112 K), which is accessible through cryogenic liquefied-natural-gas technology. A collective-nuclear-quantum effect difference between the ordered 18O2 and 16O2 molecular assemblies confined in subnanometer pores can explain the observed equilibrium separation and is applicable to other isotopic gases.
RESUMEN
Polymers and transition-metal oxides have gained great interest as a photocatalyst in environmental remediation. They could be modified with each other in order to improve their activity. Here, a sunlight-responsive hierarchically structured ternary composite of nickel oxide, polyaniline, and reduced graphene oxide (NiO@PANI/RGO) has been synthesized and employed as a catalyst for dye [methylene blue (MB)] degradation. PANI/GO synthesized by interfacial polymerization acts as a matrix for the growth of NiO using a microemulsion solvothermal method, ensuing an in situ reduction of graphene oxide during the formation of a hierarchical NiO@PANI/RGO composite. Morphological studies of the as-synthesized NiO@PANI/RGO composite reveal fine NiO (10 nm) nanoparticles intercalated between the uniformly grown PANI spines (50-60 nm) over the RGO surface. The optical band gap of â¼1.9 eV calculated from the UV-vis spectrum illustrates the extended light absorption range for the NiO@PANI/RGO photocatalyst. The efficiency of 98% MB degradation within 11 min with the degradation rate constant 0.086 min-1 for NiO@PANI/RGO has surpassed any other report on metal oxide/graphene-based ternary composites. Overall, this work could pave the way for the fabrication of futuristic hierarchical structured ternary nanocomposites as an efficient photocatalyst and facilitate their application in the environmental protection issues.
RESUMEN
Alloys, specifically steel, are considered as the workhorse of our society and are inimitable engineering materials in the field of infrastructure, industry and possesses significant applications in our daily life. However, creating a robust synthetic metallic surface that repels various liquids has remained extremely challenging. The wettability of a solid surface is known to be governed by its geometric nano-/micro structure and the chemical composition. Here, we are demonstrating a facile and economical way to generate copper oxide micro-nano structures with spherical (0D), needle (1D) and hierarchical cauliflower (3D) morphologies on galvanized steel substrates using a simple chemical bath deposition method. These nano/micro textured steel surfaces, on subsequent coating of a low surface energy material display excellent superhydrophobic, superoleophobic and slippery behavior. Polydimethylsiloxane coated textured surfaces illustrate superhydrophobicity with water contact angle about 160°(2) and critical sliding angle ~2°. When functionalized with low-surface energy perfluoroalkylsilane, these surfaces display high repellency for low surface tension oils as well as hydrocarbons. Among them, the hierarchical cauliflower morphology exhibits re-entrant structure thereby showing the best superoleophobicity with contact angle 149° for dodecane. Once infused with a lubricant like silicone oil, they show excellent slippery behavior with low contact angle hysteresis (~ 2°) for water drops.
RESUMEN
Oxidative stress is a condition when the concentration of free radicals and reactive molecular species rise above certain level in living systems. This condition not only perturbs the normal physiology of the system but also has been implicated in many diseases in humans and other animals. Hydrogen peroxide (H2O2) is known to be involved in induction of oxidative stress and has also been linked to a variety of ailments such as inflammation, rheumatoid arthritis, diabetes, and cancer in humans. It is one of the more stable reactive molecular species present in living systems. Because of its stability and links with various diseases, sensing the level of H2O2 can be of great help in diagnosing these diseases, thereby easing disease management and amelioration. Nanoceria is a potent candidate in free radical scavenging as well as sensing because of its unique redox properties. These properties have been exploited, in the reported work, to sense and quantify peroxide levels. Nanoceria has been synthesized using different capping agents: Hexamethylene-tetra-amine (HMTA) and fructose. CeO2-HMTA show rhombohedral and cubic 6.4 nm particles whereas CeO2-fructose are found to be spherical with average particle diameter size 5.8 nm. CeO2-HMTA, due to the better exposure of the active (200) and (220) planes relative to (111) plane, exhibits superior electrocatalytic activity toward H2O2 reduction. Amperometric responses were measured by increasing H2O2 concentration. The authors observed a sensitivity of 21.13 and 9.6 µA cm(-2) mM(-1) for CeO2-HMTA and CeO2-fructose, respectively. The response time of 4.8 and 6.5 s was observed for CeO2-HMTA and CeO2-fructose, respectively. The limit of detection is as low as 0.6 and 2.0 µM at S/N ratio 3 for CeO2-HMTA and CeO2-fructose, respectively. Ceria-HMTA was further tested for its antioxidant activity in an animal cell line in vitro and the results confirmed its activity.
Asunto(s)
Cerio/química , Técnicas Electroquímicas/métodos , Depuradores de Radicales Libres/química , Peróxido de Hidrógeno/análisis , Animales , Antioxidantes/química , Sensibilidad y EspecificidadRESUMEN
Cubic spinel Co3O4 nanoparticles with spherical (0D) and hexagonal platelet (2D) morphologies were synthesized using a simple solvothermal method by tuning the reaction time. XRD and HRTEM analyses revealed pure phase with growth of Co3O4 particles along [111] and [110] directions. UV-vis studies showed two clear optical absorption peaks corresponding to two optical band gaps in the range of 400-500 nm and 700-800 nm, respectively, related to the ligand to metal charge transfer events (O(2-) â Co(2+,3+)). Under the electrochemical study in two electrode assembly system (Co3O4/KOH/Co3O4) without adding any large area support or a conductive filler, the hexagonal platelet Co3O4 particles exhibited comparatively better characteristics with high specific capacitance (476 F g(-1)), energy density 42.3 Wh kg(-1) and power density 1.56 kW kg(-1) at current density of 0.5 Ag(-1), that suited for potential applications in supercapacitors. The observed better electrochemical properties of the nanoporous Co3O4 particles is attributed to the layered platelet structural arrangement of the hexagonal platelet and the presence of exceptionally high numbers of regularly ordered pores.
RESUMEN
A simple, yet novel hydrothermal method has been developed to synthesize surfactant-free Cu2ZnSnS4 nanocrystal ink in water. The environmentally friendly, 2-4 nm ultrafine particles are stable in water for several weeks. Detailed X-ray diffraction (XRD) and high-resolution transmission electron microscopy revealed the formation of single-crystalline-kesterite-phase Cu2ZnSnS4. Elemental mapping by scanning electron microscopy/energy dispersive spectrometry corroborated the presence of all four elements in a stoichiometric ratio with minor sulfur deficiency. Finally, Raman spectroscopy ruled out the possible presence of impurities of ZnS, Cu2SnS3, SnS, SnS2, Cu(2-x)S, or Sn2S3, which often interfere with the XRD and optical spectra of Cu2ZnSnS4. X-ray photoelectron spectroscopic studies of the as-synthesized samples confirmed that the oxidation states of the four elements match those of the bulk sample. Optical absorption analyses of thin film and solution samples showed high absorption efficiency (>10(4) cm(-1)) across the visible and near-infrared spectral regions and a band gap E(g) of 1.75 eV for the as-synthesized sample. A non-ohmic asymmetric rectifying response was observed in the I-V measurement at room temperature. The nonlinearity was more pronounced for this p-type semiconductor when the resistance was measured against temperature in the range 180-400 K, which was detected in the hot-point probe measurement.