RESUMEN
Once granular materials flow, particles charge because of the triboelectric effect. When particles touch each other, charges are exchanged during contact whether they are made of the same material or not. Surprisingly, when different sizes of particles are mixed together, large particles tend to charge positively while small particles charge negatively. If the particles are relatively small (typically smaller than a millimeter), the electrostatic interaction between the particles becomes significant and leads to aggregation or sticking on the surface of the container holding them. Studying those effects is challenging as the mechanisms that govern the triboelectric effect are not fully understood yet. We show that the patch model (or mosaic model) is suitable to reproduce numerically the flow of triboelectrically charged granular materials as the specific charging of bi-disperse granular materials can be retrieved. We investigate the influence of charging on the cohesion of granular materials and highlight the relevant parameters related to the patch model that influence cohesion. Our results shed new light on the mechanisms of the triboelectric effect as well as on how the charging of granular materials influences cohesion using numerical simulations.
RESUMEN
Particle engineering technologies have led to the commercialization of new inhaled powders like PulmoSolTM or PulmoSphereTM. Such platforms are produced by spray drying, a well-known process popular for its versatility, thanks to wide-ranging working parameters. Whereas these powders contain a high drug-loading, we have studied a low-dose case, in optimizing the production of powders with two anti-asthmatic drugs, budesonide and formoterol. Using a Design of Experiments approach, 27 powders were produced, with varying excipient mixes (cyclodextrins, raffinose and maltodextrins), solution concentrations, and spray drying parameters in order to maximize deep lung deposition, measured through fine particle fraction (next generation impactor). Based on statistical analysis, two powders made of hydropropyl-ß-cyclodextrin alone or mixed with raffinose and L-leucine were selected. Indeed, the two powders demonstrated very high fine particle fraction (>55%), considerably better than commercially available products. Deep lung deposition has been correlated to very fine particle size and lower microparticles interactions shown by laser diffraction assays at different working pressures, and particle morphometry. Moreover, the two drugs would be predicted to deposit homogeneously into the lung according to impaction studies. Uniform delivery is fundamental to control symptoms of asthma. In this study, we develop carrier-free inhalation powders promoting very efficient lung deposition and demonstrate the high impact of inter-particular interactions intensity on their aerosolization behaviour.
Asunto(s)
Budesonida , Aerosoles y Gotitas Respiratorias , Polvos , Rafinosa , Administración por Inhalación , Tamaño de la Partícula , Inhaladores de Polvo Seco , AerosolesRESUMEN
Magnetocapillary interactions between particles allow to self-assemble floating crystals along liquid interfaces. For a fixed number of particles, different states possessing different symmetrical features, known as metastable states, coexist. In this paper, we demonstrate how to trigger the transition from one state to another, either by rearranging the crystal, or by controlling its growth. First, we show that externally controlled magnetic fields can squeeze the entire crystal to induce structural modifications, that upon relaxation can lead to a modified state. Second, we propose localized laser-induced thermocapillary flows that can be used to guide new particles towards an existing crystal in a desired direction, thus favoring a particular resulting state. The control of the formation of metastable states is a key ingredient to functionalize such assemblies, paving the way to self-assembled microrobots.
RESUMEN
In the tropics, the conservation of tree species is closely linked to that of animals, as a large proportion of trees are zoochoric and therefore rely on the movement of animals to disperse their seeds in order to increase the chances of the survival of progeny and to allow migration in the face of climate change. Research into the prediction of animal movements is therefore critical but has so far focused only on particular features of collective behavior. In contrast, we included the concepts of cohesion maintenance, feeding area search and transient leadership in a single model, CoFee-L, and tested it to simulate the movement of a wild-ranging troop of primates (Macaca leonina). We analyzed and compared observations and simulations with a statistical physics tool (mean squared displacement) and with histograms and χ2 (for the step length and turning angle distributions). CoFee-L allowed us to simulate the physical properties of the troop's center of mass trajectory as well as the step length and angle distributions of the field data. The parametrization of CoFee-L was rather straightforward, as it was sufficient to fix a set of parameters easily observable in the field and then to adjust the values of four parameters that have biological meaning.
RESUMEN
Information storage is a key element of autonomous, out-of-equilibrium dynamics, especially for biological and synthetic active matter. In synthetic active matter however, the implementation of internal memory in self-propelled systems is often absent, limiting our understanding of memory-driven dynamics. Recently, a system comprised of a droplet generating its guiding wavefield appeared as a prime candidate for such investigations. Indeed, the wavefield, propelling the droplet, encodes information about the droplet trajectory and the amount of information can be controlled by a single scalar experimental parameter. In this work, we show numerically and experimentally that the accumulation of information in the wavefield induces the loss of time correlations, where the dynamics can then be described by a memory-less process. We rationalize the resulting statistical behavior by defining an effective temperature for the particle dynamics where the wavefield acts as a thermostat of large dimensions, and by evidencing a minimization principle of the generated wavefield.
Asunto(s)
Amnesia , HumanosRESUMEN
Pulmonary drug administration has long been used for local or systemic treatment due to several advantages. Dry powder inhalers emerge as the most promising due to efficiency, ecologic, and drug stability concerns. Coarse lactose-carrier is still the gold standard when inhalation powders are developed. Despite some efforts to produce new types of powders, the lung drug deposition is still poorly controlled, which will ultimately impact therapeutic effectiveness. In this study, we developed "engineered-inhalation powders" using the spray-drying technique. Multiple carbohydrates excipients were binary mixed and combined with two active pharmaceutical ingredients for asthma therapy (budesonide and formoterol). Particle morphology, from spherical to deflated shapes, was characterized by the number and the depth of dimples measured from SEM images. We define a new characteristic deflation ratio ξ as the product between the number of dimples and their depth. Six different powders having opposite morphologies have been selected and we have demonstrated a linear correlation between the fine particle fraction and the deflation ratio of produced powders. Overall, we showed first that the morphology of inhalable powder can be finely tuned by spray-drying technique when excipients varied. Secondly, we developed stable inhalation powders that simultaneously induced high fine particle fractions (>40%) for two drugs due to their deflated surface. The stability has been evaluated for up to 2 months at room temperature.
Asunto(s)
Excipientes , Lactosa , Aerosoles , Tamaño de la Partícula , PolvosRESUMEN
When small objects are placed at a water-air interface, attractive and repulsive interactions appear due to liquid deformations. Although it is commonly admitted that two floating objects deforming the liquid interface in the same way are only attracting, we show that in the case of objects whose height does not vary during the interaction, the situation is much more complex than expected. In fact, attraction and repulsion can coexist at different ranges, so that equilibrium distances are observed. A 1D model based on the capillary interaction between vertical plates immersed in water is used to illustrate and calculate these situations, giving a picture of capillary interactions. We show that the wetting condition plays a determinant role in the behaviour of the interaction between floating objects. We also demonstrate that the equilibrium distance is given by the logarithm of the capillary charge ratio, using the right capillary charge definition. We also discuss the particular case of the existence of an interaction with a zero-capillary charge. A general equation of the equilibrium distance is proposed. An experimental confirmation of this relation is also given.
RESUMEN
Granular multiparticle ensembles are of interest from fundamental statistical viewpoints as well as for the understanding of collective processes in industry and in nature. Extraction of physical data from optical observations of three-dimensional (3D) granular ensembles poses considerable problems. Particle-based tracking is possible only at low volume fractions, not in clusters. We apply shadow-based and feature-tracking methods to analyze the dynamics of granular gases in a container with vibrating side walls under microgravity. In order to validate the reliability of these optical analysis methods, we perform numerical simulations of ensembles similar to the experiment. The simulation output is graphically rendered to mimic the experimentally obtained images. We validate the output of the optical analysis methods on the basis of this ground truth information. This approach provides insight in two interconnected problems: the confirmation of the accuracy of the simulations and the test of the applicability of the visual analysis. The proposed approach can be used for further investigations of dynamical properties of such media, including the granular Leidenfrost effect, granular cooling, and gas-clustering transitions.
RESUMEN
The dynamics of a triangular magnetocapillary swimmer is studied using the lattice Boltzmann method. We extend on our previous work, which deals with the self-assembly and a specific type of the swimmer motion characterized by the swimmer's maximum velocity centred around the particle's inverse viscous time. Here, we identify additional regimes of motion. First, modifying the ratio of surface tension and magnetic forces allows to study the swimmer propagation in the regime of significantly lower frequencies mainly defined by the strength of the magnetocapillary potential. Second, introducing a constant magnetic contribution in each of the particles in addition to their magnetic moment induced by external fields leads to another regime characterized by strong in-plane swimmer reorientations that resemble experimental observations.
RESUMEN
The flow of cohesive granular materials in a two-dimensional rotating drum is investigated using discrete element method simulations. Contacts between particles are modeled based on the widely used model of the spring-dashpot and Coulomb's friction law. A simplified model of intermediate range attraction between grains (i.e., cohesion) has been used in order to reproduce the flow of electrostatic or wet granular materials. Granular flow is generated by means of a rotating drum and the effect of the rotation speed, the friction between the grains, and the cohesion are studied. Significantly different flow behaviors are observed when cohesion is added. Plug flow appears in the rotating drum for a wide range of rotation speeds when cohesion becomes sufficiently strong. We propose a measurement of surface flow fluctuations to quantify the strength of cohesion, inspired by the previous observation of plug flow. Then, we make use of the results to include the effect of cohesion into a theoretical flow model. A good agreement is obtained between theory and numerical measurements of the granular bed's dynamic angle of repose, which allows us to propose a method for estimating the microscopic cohesion between grains based on the measurement of surface fluctuations.
RESUMEN
We perform three-dimensional particle-based simulations of confined, vibrated, and magnetizable beads to study the effect of cell geometry on pattern selection. For quasi-two-dimensional systems, we reproduce previously observed macroscopic patterns such as hexagonal crystals and labyrinthine structures. For systems at the crossover from two to three dimensions, labyrinthine branches shorten and are replaced by triplets of beads forming upright triangles which self-organize into a herringbone pattern. This transition is associated with increases in both translational and orientational orders.
RESUMEN
Capillarity driven self-assembly is a way to create spontaneous structures along liquid interfaces in between bottom-up and top-down fabrication methods. Based on multipolar capillary interactions between elementary floating object, simple to complex structures can been achieved by designing objects with specific 3D shapes. We show herein that a switchable self-assembled structure can be obtained with a shape memory polymer. At a defined temperature of the liquid, the 3D shape of each elementary floating object changes, modifying the capillary interactions thus forcing the stable structure to disassemble and to form a new arrangement. Based on simulations and experiments, we study how this cooperative behavior induces metastable complex configurations.
RESUMEN
For reaching high packing fractions, grains of various sizes are often mixed together allowing the small grains to fill the voids created by the large ones. However, in most cases, granular segregation occurs leading to lower packing fractions. We performed a wide set of experiments with different binary granular systems, proving that two main parameters are respectively the volume fraction f of small beads and the grain size ratio α. In addition, we show how granular segregation affects the global packing fraction. We propose a model with a strong dependency on α that takes into account possible granular segregation. Our model is in good agreement with both earlier experimental and simulation data.
RESUMEN
Correction for 'Capillary assemblies in a rotating magnetic field' by Galien Grosjean et al., Soft Matter, 2019, DOI: .
RESUMEN
We present a wave-memory-driven system that exhibits intermittent switching between two propulsion modes in free space. The model is based on a pointlike particle emitting periodically cylindrical standing waves. Submitted to a force related to the local wave-field gradient, the particle is propelled, while the wave field stores positional information on the particle trajectory. For long memory, the linear motion is unstable and we observe erratic switches between two propulsive modes: linear motion and diffusive motion. We show that the bimodal propulsion and the stochastic aspect of the dynamics at long time are generated by a Shil'nikov chaos. The memory of the system controls the fraction of time spent in each phase. The resulting bimodal dynamics shows analogies with intermittent search strategies usually observed in living systems of much higher complexity.
RESUMEN
Small objects floating on a fluid have a tendency to aggregate due to capillary forces. This effect has been used, with the help of a magnetic induction field, to assemble submillimeter metallic spheres into a variety of structures, whose shape and size can be tuned. Under time-varying fields, these assemblies can propel themselves due to a breaking of time reversal symmetry in their adopted shapes. In this article, we study the influence of an in-plane rotation of the magnetic field on these structures. Various rotational modes have been observed with different underlying mechanisms. The magnetic properties of the particles cause them to rotate individually. Dipole-dipole interactions in the assembly can cause the whole structure to align with the field. Finally, non-reciprocal deformations can power the rotation of the assembly. Symmetry plays an important role in the dynamics, as well as the frequency and amplitude of the applied field. Understanding the interplay of these effects is essential, both to explain previous observations and to develop new functions for these assemblies.
RESUMEN
A system of ferromagnetic particles trapped at a liquid-liquid interface and subjected to a set of magnetic fields (magnetocapillary swimmers) is studied numerically using a hybrid method combining the pseudopotential lattice Boltzmann method and the discrete element method. After investigating the equilibrium properties of a single, two, and three particles at the interface, we demonstrate a controlled motion of the swimmer formed by three particles. It shows a sharp dependence of the average center-of-mass speed on the frequency of the time-dependent external magnetic field. Inspired by experiments on magnetocapillary microswimmers, we interpret the obtained maxima of the swimmer speed by the optimal frequency centered around the characteristic relaxation time of a spherical particle. It is also shown that the frequency corresponding to the maximum speed grows and the maximum average speed decreases with increasing interparticle distances at moderate swimmer sizes. The findings of our lattice Boltzmann simulations are supported by bead-spring model calculations.
RESUMEN
Binary granular mixtures are known to show various packing arrangements depending on both fractions and size ratios of their components. While the final packing fraction can be estimated by geometrical arguments, the dynamics of the pile submitted to gentle vibrations towards a dense state is seen to be highly size ratio dependent. We observe experimentally a diverging compaction characteristic time close to a critical size ratio, such that the grain mobility in the packing is the lowest close to the percolation threshold, when small particles can pass through the voids left by the large ones. Moreover, we evidence a fast compaction dynamics regime when the grain size ratio is large enough.
RESUMEN
The packing fraction dynamics of a wet granular material submitted to freeze-thaw cycling is investigated experimentally. The dynamics is strongly influenced by the liquid volume fraction ω in the considered range of 0.03<ω<0.32. This range of liquid contents covers different regimes of wetness from the creation of the capillary network until the formation of large clusters and finally close to the saturated case. For the liquid contents ωâ³0.15, the pile experiences a decompaction until a particular value of the packing fraction 0.56 corresponding to a random loose packing configuration for monosized spheres. Moreover, the decompaction starts after a cycling number that decreases exponentially with the liquid content. Finally, we show that the packing dynamics can be well modeled on the basis of a Landau potential with an asymmetric double-well structure. The onset of decompaction represents the tendency of the system to stay in a metastable state. After several cycles, the forces induced by the thermal cycling and local stochastic rearrangements of the grains can drive the system to overcome the energy barrier of the cohesive forces.