Interplay of kernel shape and surface structure for NIR luminescence in atomically precise gold nanorods.

It is challenging to attain strong near-infrared (NIR) emissive gold nanoclusters. Here we show a rod-shaped cluster with the composition of [Au28(p-MBT)14(Hdppa)3](SO3CF3)2 (1 for short, Hdppa is N,N-bis(diphenylphosphino)amine, p-MBT is 4-methylbenzenethiolate) has been synthesized. Single crystal X-ray structural analysis reveals that it has a rod-like face-centered cubic (fcc) Au22 kernel built from two interpenetrating bicapped cuboctahedral Au15 units. 1 features NIR luminescence with an emission maximum at 920 nm, and the photoluminescence quantum yield (PLQY) is 12%, which is 30-fold of [Au21(m-MBT)12(Hdppa)2]SO3CF3 (2, m-MBT is 3-methylbenzenethiolate) with a similar composition and 60-fold of Au30S(S­t­Bu)18 with a similar structure. time-dependent DFT(TDDFT)calculations reveal that the luminescence of 1 is associated with the Au22 kernel. The small Stokes shift of 1 indicates that it has a very small excited state structural distortion, leading to high radiative decay rate (kr) probability. The emission of cluster 1 is a mixture of phosphorescence and thermally activated delayed fluorescence(TADF), and the enhancement of the NIR emission is mainly due to the promotion of kr rather than the inhibition of knr. This work demonstrates that the metal kernel and the surface structure are both very important for cluster-based NIR luminescence materials.

Ligand-Protected Au55 with a Novel Structure and Remarkable CO2 Electroreduction Performance.

A Au55 nanocluster with the composition of [Au55 (p-MBT)24 (Ph3 P)6 ](SbF6 )3 (p-MBT=4-methylbenzenethiolate) is synthesized via direct reduction of gold-phosphine and gold-thiolate precursors. Single-crystal X-ray diffraction reveals that this Au55 nanocluster features a face-centered cubic (fcc) Au55 kernel, different from the well-known two-shell cuboctahedral arrangement in Au55 (Ph3 P)12 Cl6 . The Au55 cluster shows a wide optical absorption band with optical energy gap (Eg =1.28 eV). It is found that the exclusion of chloride is crucial for the formation of the title cluster, otherwise rod-like [Au25 (SR)5 (PPh3 )10 Cl2 ]2+ is obtained. The strategy to run synthetic reaction in the absence of halide leads to new members of phosphine/thiolate co-protected metal nanoclusters. The Au55 nanocluster exhibits high catalytic activity and selectivity for electrochemical reduction of CO2 to CO; the Faradaic efficiency (FE) reaches 94.1 % at -0.6 V vs. reversible hydrogen electrode (RHE).

Ultrafine Pt-Ni nanoparticles in hollow porous carbon spheres for remarkable oxygen reduction reaction catalysis.

Ultrafine bimetallic Pt-Ni nanoparticles, which catalyze the oxygen reduction reaction (ORR) efficiently, were successfully prepared in hollow porous carbon spheres (HPCSs) under the assistance of organic molecules. 2,2'-Dipyridylamine (dpa) was found to be most effective in preparing homogeneous small Pt-Ni nanoparticles (2.0 ± 0.4 nm) without the phase separation of Pt and Ni during synthesis, and the assistance of the organic molecules was investigated for the alloy nanoparticle formation. The Pt-Ni nanoparticle/HPCS catalyst synthesized in the presence of dpa exhibited remarkable electrochemical performance in the ORR showing a high mass activity of 3.25 ± 0.14 A mg-1Pt at 0.9 VRHE (13.5-fold higher relative to a commercial Pt/C catalyst), a large electrochemical surface area of 105 ± 8 m2 g-1Pt, and high durability. After 60 000 cycles of accelerated durability testing, the mass activity was still 12.3 times higher than that of the commercial Pt/C catalyst.

A stable well-defined copper hydride cluster consolidated with hemilabile phosphines.

Copper hydrides are very useful in hydrogenation reactions. We report a stable Stryker-type copper hydride reagent protected by hemilabile phosphines: [Cu8H6(dppy)6](OTf)2 (Cu8-H, dppy = diphenylphosphino-2-pyridine). The metal core of this cluster has a bicapped octahedral configuration, and the copper-bound hydrides each triply bridges over a triangular face of the octahedron. This cluster is attractive due to its facile preparation and excellent stability under ambient conditions. The comparable activity and selectivity both in the stoichiometric and catalytic reactions make Cu8-H a promising alternative to Stryker's reagent.

Confining Sub-Nanometer Pt Clusters in Hollow Mesoporous Carbon Spheres for Boosting Hydrogen Evolution Activity.

Electrochemical water splitting is considered as a promising approach to produce clean and sustainable hydrogen fuel. As a new class of nanomaterials with high ratio of surface atoms and tunable composition and electronic structure, metal clusters are promising candidates as catalysts. Here, a new strategy is demonstrated to synthesize active and stable Pt-based electrocatalysts for hydrogen evolution by confining Pt clusters in hollow mesoporous carbon spheres (Pt5 /HMCS). Such a structure would effectively stabilize the Pt clusters during the ligand removal process, leading to remarkable electrocatalytic performance for hydrogen production in both acidic and alkaline solutions. Particularly, the optimal Pt5 /HMCS electrocatalyst exhibits 12 times the mass activity of Pt in commercial Pt/C catalyst with similar Pt loading. This study exemplifies a simple yet effective approach to improve the cost effectiveness of precious-metal-based catalysts with stabilized metal clusters.

Alkynyl Approach toward the Protection of Metal Nanoclusters.

The past decades have witnessed great advances in the synthesis, structure determination, and properties investigation of coinage metal nanoclusters. These monodisperse clusters have well-defined molecular structures, which is advantageous in correlating structures and properties. Metal nanoclusters are large molecules consisting of many components, so it is a big challenge to prepare them in a rational way. Strenuous efforts have been made to control their geometric and electronic structures, in order to optimize their various properties. A metal nanocluster normally contains a metal core and a peripheral ligand shell. The ligands do not only function as simple stabilizing agents. It has been revealed that these ligands are able to influence the formation processes of the nanoclusters, and they may also dictate the sizes, shapes, and properties of nanoclusters. There are mainly three types of ligands that are widely used as surface anchors on coinage metal nanoclusters: thiolates, phosphines, and halides. Recent ligand engineering has extended the scope to alkynyl ligands. As alkynyl ligands are versatile in interacting with metal atoms, interesting alkynyl-metal interfacial structures including linear, L-shaped, and V-shaped staple motifs can be generated, as well as a series of novel coinage metal nanoclusters that exhibit intriguing molecular geometries. The staple motifs do not simply resemble the surface structures of thiolate-protected nanoclusters, because the incorporation of alkynyl ligands may significantly alter diverse properties of nanoclusters. Compared with thiolate-protected gold nanoclusters, alkynyl-protected ones with identical metal cores exhibit distinctly different absorption profiles and show much improved catalytic activities for semihydrogenation of alkynes. In addition, the participation of alkynyl ligands could profoundly affect the luminescent properties of nanoclusters. These "ligand effects" are mainly attributed to the different nature of alkynyl ligands, as electronic perturbation through π-conjugated units may largely modulate the electronic structure of the whole cluster. In this Account, we describe the development of coinage metal nanoclusters protected with alkynyl ligands. We will first briefly bring up the emergence of alkynyl ligands as anchoring groups on the surfaces of nanoclusters. Then we present the direct reduction method for the synthesis of the following four categories of nanoclusters: (a) gold nanoclusters with mixed-ligand shells, (b) all alkynyl-protected gold nanoclusters, (c) heterobimetallic gold nanoclusters, and (d) silver nanoclusters. Their molecular structures are described, and their various alkynyl-metal interfacial structures are compared with thiolate-metal staples. Finally, ligand effects on the properties of the clusters, including optical absorption, luminescence, and catalysis, are discussed. The alkynyl ligands play an important role in terms of both structural and property aspects. We believe this Account will attract increasing attention to alkynyl ligands, which have shown promising potential in generating new structures and properties of coinage metal nanoclusters.

Isolation and Total Structure Determination of an All-Alkynyl-Protected Gold Nanocluster Au144.

Total structure determination of a ligand-protected gold nanocluster, Au144 , has been successfully carried out. The composition of title nanocluster is Au144 (C≡CAr)60 (1; Ar=2-FC6 H4 -). The cluster 1 exhibits a quasi-spherical Russian doll-like architecture, comprising a Au54 two-shelled Mackay icosahedron (Au12 @Au42 ), which is further enclosed by a Au60 anti-Mackay icosahedral shell. The Au114 kernel is enwrapped by thirty linear ArC≡C-Au-C≡CAr staple motifs. The absorption spectrum of 1 shows two bands at 560 and 620 nm. This spectrum is distinctly different from that of thiolated Au144 , which was predicted to have an almost identical metal kernel and very similar ligands arrangement in 1. These facts indicate the molecule-like behavior of 1 and significant involvement of ligands in the electronic structure of 1. The cluster 1 is hitherto the largest coinage metal nanocluster with atomically precise molecular structure in the alkynyl family. The work not only addresses the concern of structural information of Au144 , which had been long-pursued, but also provides an interesting example showing ligand effects on the optical properties of ligand protected metal nanoclusters.

Ligand effects in catalysis by atomically precise gold nanoclusters.

Atomically precise gold nanoclusters are ideal model catalysts with well-defined compositions and tunable structures. Determination of the ligand effect on catalysis requires the use of gold nanoclusters with protecting ligands as the only variable. Two isostructural Au38 nanoclusters, [Au38(L)20(Ph3P)4]2+ (L = alkynyl or thiolate), have been synthesized by a direct reduction method, and they have an unprecedented face-centered cubic (fcc)-type Au34 kernel surrounded by 4 AuL2 staple motifs, 4 Ph3P, and 12 bridging L ligands. The Au34 kernel can be derived from the fusion of two fcc-type Au20 via sharing a Au6 face. Catalytic performance was studied with these two nanoclusters supported on TiO2 (1/TiO2 and 2/TiO2) as catalysts. The alkynyl-protected Au38 are very active (>97%) in the semihydrogenation of alkynes (including terminal and internal ones) to alkenes, whereas the thiolated Au38 showed a very low conversion (<2%). This fact suggests that the protecting ligands play an important role in H2 activation. This work presents a clear demonstration that catalytic performance of gold nanoclusters can be modulated by the controlled construction of ligand spheres.

Homoleptic Alkynyl-Protected Gold Nanoclusters: Au44 (PhC≡C)28 and Au36 (PhC≡C)24.

For the first time total structure determination of homoleptic alkynyl-protected gold nanoclusters is reported. The nanoclusters are synthesized by direct reduction of PhC≡CAu, to give Au44 (PhC≡C)28 and Au36 (PhC≡C)24 . The Au44 and Au36 nanoclusters have fcc-type Au36 and Au28 kernels, respectively, as well as surrounding PhC≡C-Au-C2 (Ph)Au-C≡CPh dimeric "staples" and simple PhC≡C bridges. The structures of Au44 (PhC≡C)28 and Au36 (PhC≡C)24 are similar to Au44 (SR)28 and Au36 (SR)24 , but the UV/Vis spectra are different. The protecting ligands influence the electronic structures of nanoclusters significantly. The synthesis of these two alkynyl-protected gold nanoclusters indicates that a series of gold nanoclusters in the general formula Aux (RC≡C)y as counterparts to Aux (SR)y can be expected.

Atomically Precise Bimetallic Au19Cu30 Nanocluster with an Icosidodecahedral Cu30 Shell and an Alkynyl-Cu Interface.

Bimetallic nanoclusters Au19Cu30 with chemical composition of [Au19Cu30(C≡CR)22(Ph3P)6Cl2](NO3)3 (where RC≡C is from 3-ethynylthiophene (H3C4S-3-C≡CH) or ethynylbenzene (PhC≡CH)) has been synthesized. Single X-ray structural analysis reveals that Au19Cu30 has a multishelled core structure of Au@Au12@Cu30@Au6, comprising a centered icosahedral Au13 (Au@Au12) surrounded by an icosidodecahedral Cu30 shell and an outmost shell of a chairlike hexagonal Au6. The alkynyl carbon is bound to the hollow sites on the Au19Cu30 nanocluster surface, which is a novel interfacial binding mode in alkynyl-protected alloy nanoclusters. The Cu30 icosidodecahedron is unprecedented and Au19Cu30 represents the first alkynyl-protected Au-Cu alloy nanocluster.

Alkynyl-protected silver nanoclusters featuring an anticuboctahedral kernel.

Two unique silver nanoclusters protected by alkynyl and diphosphine ligands have been synthesized. Single crystal structural determination reveals that they have a centered anticuboctahedral Ag13 kernel. Such a kernel is observed for the first time in a coinage metal nanocluster. This work offers new insights into the fact that the PhC[triple bond, length as m-dash]C ligand represents a new direction in synthesizing novel metal nanoclusters.

Alkynyl-protected gold and gold-silver nanoclusters.

Ligand-protected metal nanoclusters as unique nanomaterials have attracted great attention. The protecting ligands that directly bind on the cluster surfaces are crucial in dictating the structures and properties of the clusters. In contrast to the extensively studied thiolates, alkynyl ligands have been found recently to be important ligands for passivating gold/silver cluster surfaces. In this Frontier article, recent advances in alkynyl-protected metal nanoclusters are overviewed, and the structures, luminescence and catalytic activities are also discussed. It is demonstrated that alkynyls are very promising ligands in the control of the structures and properties of gold/silver nanoclusters.

[Performance and Mechanism Study of Visible Light-driven C3N4/BiOBr Composite Photocatalyst].

Efficient visible light-driven C3N4/BiOBr composite photocatalysts were prepared via a facile hydrothermal method and characterized by X-ray diffraction, Fourier transform infrared, scanning electron microscopy, UV-Vis diffuse reflectance spectra and photoluminescence spectra for the phase composition and optical property. Taking rhodamine B (RhB) as the target pollutant, the photocatalytic activity and stability of photocatalysts were studied under visible light irradiation. Furthermore, the mechanism in the process of photocatalytic degradation was discussed by electron spin resonance spectroscopy analysis and the trapping experiment of generated radicals. The results indicated that C3N4/BiOBr composite photocatalysts had excellent crystallization performance. Composited by C3N4, BiOBr exhibited considerably higher photocatalytic activity by reducing the rate of electron-hole recombination. Among prepared composites with various C3N4 contents, 15% C3N4/BiOBr exhibited the best efficiency for the degradation of RhB. After irradiation for 18 minutes, the degradation rate of RhB was 100%, which was 1.5 times higher than that using pure BiOBr. The results also suggested that holes and ·O2- were the main reactive species in the photocatalytic process for the RhB degradation, and holes played the leading role.

Thiacalix[4]arene: New protection for metal nanoclusters.

Surface organic ligands are critical for the formation and properties of atomically precise metal nanoclusters. In contrast to the conventionally used protective ligands such as thiolates and phosphines, thiacalix[4]arene has been used in the synthesis of a silver nanocluster, [Ag35(H2L)2(L)(C≡CBu(t))16](SbF6)3, (H4L, p-tert-butylthiacalix[4]-arene). This is the first structurally determined calixarene-protected metal nanocluster. The chelating and macrocyclic effects make the thiacalix[4]arene a rigid shell that protects the silver core. Upon addition or removal of one silver atom, the Ag35 cluster can be transformed to Ag36 or Ag34 species, and the optical properties are changed accordingly. The successful use of thiacalixarene in the synthesis of well-defined silver nanoclusters suggests a bright future for metal nanoclusters protected by macrocyclic ligands.

An Atomically Precise Au10 Ag2 Nanocluster with Red-Near-IR Dual Emission.

A red-near-IR dual-emissive nanocluster with the composition [Au10 Ag2 (2-py-C≡C)3 (dppy)6 ](BF4 )5 (1; 2-py-C≡C is 2-pyridylethynyl, dppy=2-pyridyldiphenylphosphine) has been synthesized. Single-crystal X-ray structural analysis reveals that 1 has a trigonal bipyramidal Au10 Ag2 core that contains a planar Au4 (2-py-C≡C)3 unit sandwiched by two Au3 Ag(dppy)3 motifs. Cluster 1 shows intense red-NIR dual emission in solution. The visible emission originates from metal-to-ligand charge transfer (MLCT) from silver atoms to phosphine ligands in the Au3 Ag(dppy)3 motifs, and the intense NIR emission is associated with the participation of 2-pyridylethynyl in the frontier orbitals of the cluster, which is confirmed by a time-dependent density functional theory (TD-DFT) calculation.

Atomically Precise Alkynyl-Protected Metal Nanoclusters as a Model Catalyst: Observation of Promoting Effect of Surface Ligands on Catalysis by Metal Nanoparticles.

Metal nanoclusters whose surface ligands are removable while keeping their metal framework structures intact are an ideal system for investigating the influence of surface ligands on catalysis of metal nanoparticles. We report in this work an intermetallic nanocluster containing 62 metal atoms, Au34Ag28(PhC≡C)34, and its use as a model catalyst to explore the importance of surface ligands in promoting catalysis. As revealed by single-crystal diffraction, the 62 metal atoms in the cluster are arranged as a four-concentric-shell Ag@Au17@Ag27@Au17 structure. All phenylalkynyl (PA) ligands are linearly coordinated to the surface Au atoms with staple "PhC≡C-Au-C≡CPh" motif. Compared with reported thiolated metal nanoclusters, the surface PA ligands on Au34Ag28(PhC≡C)34 are readily removed at relatively low temperatures, while the metal core remains intact. The clusters before and after removal of surface ligands are used as catalysts for the hydrolytic oxidation of organosilanes to silanols. It is, for the first time, demonstrated that the organic-capped metal nanoclusters work as active catalysts much better than those with surface ligands partially or completely removed.

A Near-Infrared-Emissive Alkynyl-Protected Au24 Nanocluster.

An alkynyl-protected gold nanocluster [Au24(C≡CPh)14(PPh3)4](SbF6)2 has been prepared by a direct reduction method. Single-crystal X-ray diffraction reveals that the molecular structure contains a Au22 core that is made of two Au13-centered cuboctahedra that share a square face. Two staple-like PhC≡C-Au-C≡CPh motifs are located around the center of the rod-like Au22 core. This Au24 nanocluster is highly emissive in the near-infrared region with λ(max)=925 nm and the nature of the HOMO-LUMO transition is investigated by time-dependent DFT calculations.

Highly Active Gold(I)-Silver(I) Oxo Cluster Activating sp³ C-H Bonds of Methyl Ketones under Mild Conditions.

The activation of C(sp(3))-H bonds is challenging, due to their high bond dissociation energy, low proton acidity, and highly nonpolar character. Herein we report a unique gold(I)-silver(I) oxo cluster protected by hemilabile phosphine ligands [OAu3Ag3(PPhpy2)3](BF4)4 (1), which can activate C(sp(3))-H bonds under mild conditions for a broad scope of methyl ketones (RCOCH3, R = methyl, phenyl, 2-methylphenyl, 2-aminophenyl, 2-hydroxylphenyl, 2-pyridyl, 2-thiazolyl, tert-butyl, ethyl, isopropyl). Activation happens via triple deprotonation of the methyl group, leading to formation of heterometallic Au(I)-Ag(I) clusters with formula RCOCAu4Ag4(PPhpy2)4(BF4)5 (PPhpy2 = bis(2-pyridyl)phenylphosphine). Cluster 1 can be generated in situ via the reaction of [OAu3Ag(PPhpy2)3](BF4)2 with 2 equiv of AgBF4. The oxo ion and the metal centers are found to be essential in the cleavage of sp(3) C-H bonds of methyl ketones. Interestingly, cluster 1 selectively activates the C-H bonds in -CH3 rather than the N-H bonds in -NH2 or the O-H bond in -OH which is traditionally thought to be more reactive than C-H bonds. Control experiments with butanone, 3-methylbutanone, and cyclopentanone as substrates show that the auration of the C-H bond of the terminal methyl group is preferred over secondary or tertiary sp(3) C-H bonds; in other words, the C-H bond activation is influenced by steric effect. This work highlights the powerful reactivity of metal clusters toward C-H activation and sheds new light on gold(I)-mediated catalysis.

Alkynyl-protected Au23 nanocluster: a 12-electron system.

A 23-gold-atom nanocluster was prepared by NaBH4-mediated reduction of a solution of PhC≡CAu and Ph3PAuSbF6 in CH2Cl2. The cluster composition was determined to be [Au23(PhC≡C)9(Ph3P)6](2+) and single-crystal X-ray diffraction revealed that the cluster has an unprecedented Au17 kernel protected by three PhC2-Au-C2 (Ph)-Au-C2 Ph motifs and six Ph3P groups. The Au17 core can be viewed as the fusion of two Au10 units sharing a Au3 triangle. Electronic structure analysis from DFT calculations suggests that the stability of this unusual 12-electron cluster is a result of the splitting of the superatomic 1D orbitals under D3h symmetry of the Au17 kernel. The discovery and determination of the structure of the Au23 cluster demonstrates the versatility of the alkynyl ligand in leading to the formation of new cluster compounds.

Au19 nanocluster featuring a V-shaped alkynyl-gold motif.

A novel Au19 nanocluster with a composition of [Au19(PhC≡C)9(Hdppa)3](SbF6)2 was synthesized (Hdppa = N,N-bis(diphenylphosphino)amine). Single crystal X-ray structural analysis reveals that the cluster comprises a centered icosahedral Au13 core hugged by three V-shaped PhC≡C-Au-C≡C(Ph)-Au-C≡CPh motifs. Such motif is observed for the first time in an alkynyl-protected gold nanocluster. The Au19 cluster shows two main optical-absorption bands at 1.25 and 2.25 eV, confirmed by time-dependent density functional theory. Orbital analysis indicates that PhC≡C- groups can actively participate in the frontier orbitals of the whole cluster. The new Au19 cluster and the novel alkynyl-gold motif open the door to understanding the alkynyl-gold interface and discovering many potential members of this new class of gold clusters.