An NIR-II-enhanced nanozyme to promote wound healing in methicillin-resistant Staphylococcus aureus infections.

Deep tissue bacterial infections, especially methicillin-resistant Staphylococcus aureus (MRSA) infections, pose challenges to clinical therapy due to their low debridement efficiency and relapsing. Molybdenum disulfide (MoS2) is used in the antibacterial field as a classic photothermal agent (NIR-I) with good biocompatibility. However, due to its limited NIR-I tissue penetration ability and single treatment mode, MoS2 has poor therapeutic effects on deep tissue infection. Herein, we prepared a defect-type hybrid 2H-MoS2 nanozyme (MoWS2) using hydrothermal method fabricate the MoWS2 composite, which is a new antibacterial strategy involving photothermal and enzyme catalysis, and further enhances the activity of the nanozyme through overheating. The regulation of 2H-MoS2 defects through tungsten ion doping endows MoWS2 with better near-infrared two-region absorption (NIR-II) and enzyme catalytic performance. Antibacterial activity experiments in vitro have shown that MoWS2 can achieve efficient bactericidal activity and biofilm clearance through hyperthermia and reactive oxygen species (ROS). Deep MRSA infection experiments have shown that MoWS2 rapidly removes bacteria from subcutaneous infected tissues through photothermal therapy (PTT) and chemodynamic therapy (CDT), accelerates the dissipation of abscesses, and promotes the healing of infected wounds. Additionally, the versatile treatment mode of MoWS2 was further confirmed through tissue sectioning and immunofluorescence staining analysis. Overall, these results provide a feasible approach for achieving efficient treatment of deep tissue infections through tungsten ion doping to regulate defective 2H-MoS2. STATEMENT OF SIGNIFICANCE: The photothermal effect of MoS2 nanosheets in the NIR-I (650-900 nm) window in anti-MRSA therapy is considered to be highly reliable and efficient in PTA. However, most of the developed PPT therapies or antimicrobial systems based on PTT therapies developed with 1T-MoS2 have in vivo sterilization temperatures of more than 55°C, which have the risk of damaging the normal tissues of the skin. In this study, we prepared W@MoS2 with a good photothermal effect (36.9%) in the NIR-II window and good peroxidase-like activity. The combined effect of PTT and CDT has a stronger bactericidal effect while avoiding high-temperature damage, which makes the W@MoS2 material more advantageous in terms of antimicrobial effect.

Iron-Single-Atom Nanozyme with NIR Enhanced Catalytic Activities for Facilitating MRSA-Infected Wound Therapy.

Patients with methicillin-resistant Staphylococcus aureus (MRSA) infections may have higher death rates than those with non-drug-resistant infections. Nanozymes offer a promising approach to eliminating bacteria by producing reactive oxygen species. However, most of the conventional nanozyme technologies encounter significant challenges with respect to size, composition, and a naturally low number of active sites. The present study synthesizes a iron-single-atom structure (Fe-SAC) via nitrogen doped-carbon, a Fe-N5 catalyst (Fe-SAC) with a high metal loading (4.3 wt.%). This catalyst permits the development of nanozymes consisting of single-atom structures with active sites resembling enzymes, embedded within nanomaterials. Fe-SAC displays peroxidase-like activities upon exposure to H2O2. This structure facilitates the production of hydroxyl radicals, well-known for their strong bactericidal effects. Furthermore, the photothermal properties augment the bactericidal efficacy of Fe-SAC. The findings reveal that Fe-SAC disrupts the bacterial cell membranes and the biofilms, contributing to their antibacterial effects. The bactericidal properties of Fe-SAC are harnessed, which eradicates the MRSA infections in wounds and improves wound healing. Taken together, these findings suggest that single Fe atom nanozymes offer a novel perspective on the catalytic mechanism and design, holding immense potential as next-generation nanozymes.

Tantalum pentoxide: a new material platform for high-performance dielectric metasurface optics in the ultraviolet and visible region.

Dielectric metasurfaces, composed of planar arrays of subwavelength dielectric structures that collectively mimic the operation of conventional bulk optical elements, have revolutionized the field of optics by their potential in constructing high-efficiency and multi-functional optoelectronic systems on chip. The performance of a dielectric metasurface is largely determined by its constituent material, which is highly desired to have a high refractive index, low optical loss and wide bandgap, and at the same time, be fabrication friendly. Here, we present a new material platform based on tantalum pentoxide (Ta2O5) for implementing high-performance dielectric metasurface optics over the ultraviolet and visible spectral region. This wide-bandgap dielectric, exhibiting a high refractive index exceeding 2.1 and negligible extinction coefficient across a broad spectrum, can be easily deposited over large areas with good quality using straightforward physical vapor deposition, and patterned into high-aspect-ratio subwavelength nanostructures through commonly-available fluorine-gas-based reactive ion etching. We implement a series of high-efficiency ultraviolet and visible metasurfaces with representative light-field modulation functionalities including polarization-independent high-numerical-aperture lensing, spin-selective hologram projection, and vivid structural color generation, and the devices exhibit operational efficiencies up to 80%. Our work overcomes limitations faced by scalability of commonly-employed metasurface dielectrics and their operation into the visible and ultraviolet spectral range, and provides a novel route towards realization of high-performance, robust and foundry-manufacturable metasurface optics.

Genome-wide characterization of the TGF-ß gene family and their expression in different tissues during tail regeneration in the Schlegel's Japanese gecko Gekko japonicus.

The transforming growth factor-ß (TGF-ß) gene family is unique to animals and is involved in various important processes including tissue regeneration. Here, we identified 52 TGF-ß family genes based on genome sequences of the gecko (Gekko japonicus), compared TGF-ß genes between G. japonicus and other four reptilian species, and evaluated the expression of 14 randomly selected genes in muscle, kidney, liver, heart, and brain during tail regeneration to investigate whether their expression was tissue-dependent. We detected 23 conserved domains, 13 in the TGF-ß ligand subfamily, and 10 in the receptor subfamily. The pattern of higher genetic variation in the ligand subfamily than in the receptor subfamily in vertebrates might result from the precise localization of agonists and antagonists in the cell surface and intracellular compartment. TGF-ß genes were unevenly distributed across 15 chromosomes in G. japonicus, presumably resulting from gene losses and gains during evolution. Genes in the TGF-ß receptor subfamily (ACVR2A, ACVR2B, ACVR1, BMPR1A, ACVRL1, BMPR2 and TGFBR1) played a vital role in the TGF-ß signal pathway. The expression of all 14 randomly selected TGF-ß genes was tissue-specific. Our study supports the speculation that some TGF-ß family genes are involved in the early stages of tail regeneration.

The causality between gut microbiota and ankylosing spondylitis: Insights from a bidirectional two-sample Mendelian randomization analysis.

BACKGROUND: The association between gut microbiota and ankylosing spondylitis (AS) has been reported in the literature; however, whether the two are correlative is unclear. METHODS: Single nucleotide polymorphisms associated with the gut microbiome composition and AS (968 AS cases and 336 191 controls) were obtained from published genome-wide association studies in this two-sample Mendelian randomization (MR) study. The causal relationship between gut microbiota and AS was estimated using the inverse-variance weighted method, and the robustness of our findings was confirmed through a comprehensive series of sensitivity analyses. RESULTS: Anaerotruncus (OR = 0.9984, 95% CI, 0.9968-0.9999, p = .0405) and Ruminococcaceae UCG002 (OR = 0.9989, 95% CI, 0.9979-0.9999, p = .0375) were protective against AS. Defluviitaleaceae (OR = 1.0015, 95% CI, 1.0005-1.0025, p = .0048), Butyricicoccus (OR = 1.0016, 95% CI, 1.0001-1.0032, p = .0429), Coprococcus 3 (OR = 1.0016, 95% CI, 1.0000-1.0032, p = .0463), and Defluviitaleaceae UCG011 (OR = 1.0016, 95% CI, 1.0005-1.0027, p = .0041) exhibited significant positive correlations with heightened susceptibility to AS. Reverse MR revealed that AS does not affect the gut microbial composition. CONCLUSION: Our study has established a genetically-based causal relationship between gut microbiota and AS. This finding suggests that we may be able to target and regulate specific bacterial groups in the gut to prevent and treat AS.

Polarization- and angle-insensitive broadband long wavelength infrared absorber based on coplanar four-sized resonators.

In many potential applications, there is a high demand for long wavelength infrared (LWIR) absorbers characterized by a compact configuration, broad operational bandwidth, high absorption efficiency, and polarization- and angle-insensitive characteristics. In this study, we design and demonstrate a high-performance broadband LWIR absorber based on coplanar four-sized resonators, consisting of arrays of titanium (Ti) disks with different diameters supported by a continuous zinc selenide (ZnSe) layer and by a Ti film acting as a back-reflector. Particle swarm optimization (PSO) is employed to optimize the complicated geometry parameters, and the final optimized device exhibits near-unity absorption (∼96.7%) across the entire operational bandwidth (8 µm∼14 µm) under unpolarized normal incidence, benefiting from the impedance-matching condition and the multiple surface plasmon resonances of this configuration. Furthermore, the proposed absorber is insensitive to the angle of incidence due to the localized surface plasmon resonances supported by these four-sized resonators, and is insensitive to the state of polarization thanks to the highly symmetric feature of the circular pattern. The measured absorption of the fabricated sample exhibits a relatively high coincidence with the simulation, with an average absorption of 88.9% ranging from 8 µm to 14 µm. The proposed absorber, which can be easily integrated into a standardized micro/nano manufacture process for cost-effective large-scale production, provides a feasible solution for improving optical performance in thermal emitter, infrared detection, and imaging applications. Furthermore, the generalized design principle employing the optimized method opens up new avenues for realizing target absorption, reflection, and transmission based on more complicated structure configurations.

A characteristic bacterial SERS marker for direct identification of Salmonella in real samples assisted by a high-performance SERS chip and a selective culture medium.

Salmonella should be absent in pharmaceutical preparations and foods according to the regulations. However, up to now, rapid and convenient identification of Salmonella is still full of challenge. Herein, we reported a label-free surface-enhanced Raman scattering (SERS) method for direct identification of Salmonella spiked in drug samples based on a characteristic bacterial SERS marker assisted by a high-performance SERS chip and a selective culture medium. The SERS chip being fabricated through in situ growth of bimetallic Au-Ag nanocomposites on silicon wafer within 2 h, featured a high SERS activity (EF > 107), good uniformity and batch-to-batch consistency (RSD < 10 %), and satisfactory chemical stability. The directly-visualized SERS marker at 1222 cm-1 originated from bacterial metabolite hypoxanthine was robust and exclusive for discrimination of Salmonella with other bacterial species. Moreover, the method was successfully used for direct discrimination of Salmonella in mixed pathogens by using a selective culture medium, and could identify Salmonella contaminant at ∼1 CFU spiked level in a real sample (Wenxin granule, a botanical drug) after 12 h of enrichment. The combined results showed that developed SERS method is practical and reliable, and could be a promising alternative for rapid identification of Salmonella contamination in pharmaceutical and foods industries.

The Illness Experiences of Chinese Adolescent Patients Living with Crohn Disease: A Descriptive Qualitative Study.

The purpose of this qualitative study was to explore the illness experience of adolescent patients with Crohn disease and describe the impact of the disease on the everyday lives of these individuals within the Chinese social and cultural context to provide references for targeted interventions for the healthcare team. A descriptive qualitative design was adopted. Purposive sampling was used to select Chinese adolescent patients with Crohn disease to participate in face-to-face in-depth interviews. Data analysis was performed using the conventional content analysis method. Through the analysis of data from 14 adolescent patients with Crohn disease, four themes were formed: (1) I am different from others, (2) I am a burden to my parents, (3) I want to be the master of my own body, and (4) I grow up suffering from illness. Healthcare providers should offer more psychological support to adolescent Crohn disease patients and advise parents to shift more attention to the mental health of their children.

The CuO and AgO co-modified ZnO nanocomposites for promoting wound healing in Staphylococcus aureus infection.

Bacterial has become a common pathogen of humans owing to their drug-resistant effects and evasion of the host immune system, with their ability to form biofilm and induce severe infections, a condition which has become a primary public health concern globally. Herein, we report on CuO@AgO/ZnO NPs antibacterial activity enhanced by near-infrared (NIR) light which was effective in the elimination of Staphylococcus aureus and the Pseudomonas aeruginosa. The CuO@AgO/ZnO NPs under NIR significantly eradicated S. aureus and its biofilm and P. aeruginosa in vitro, and subsequently exhibited such phenomenon in vivo, eliminating bacteria and healing wound. This demonstrated the combined intrinsic antibacterial potency of the Cu and Ag components of the CuO@AgO/ZnO NPs was enhanced tremendously to achieve such outcomes in vitro and in vivo. Considering the above advantages and facile preparation methods, the CuO@AgO/ZnO NPs synthesized in this work may prove as an important antibacterial agent in bacterial-related infection therapeutics and for biomedical-related purposes.

Transcriptomics and quantitative proteomics reveal changes after second stimulation of bone marrow-derived macrophages from lupus-prone MRL/lpr mice.

Innate immune memory can cause the occurrence and exacerbation of autoimmune diseases, and it is as well as being strongly associated with the pathogenesis of systemic lupus erythematosus (SLE), however, the specific mechanism remains to be further studied. We learned that IFN-γ stimulation generated innate immune memory in bone marrow-derived macrophages (BMDMs) and activated memory interferon-stimulated genes (ISGs). This research used IFN-γ and lipopolysaccharide (LPS) to treat BMDMs with lupus-prone MRL/lpr mice and showed that particular memory ISGs were substantially elevated in prestimulated macrophages. In order to identify the differentially expressed genes (DEGs), researchers turned to RNA-seq. GO and KEGG analysis showed that up-regulated DEGs were enriched in defense and innate immune responses, and were related to the expression of pattern recognition receptors (PRRs)-related pathways in macrophages. TMT-based proteome analysis revealed differentially expressed proteins (DEPs) up-regulated in BMDMs were abundant in metabolic pathways such as glucose metabolism. Our study found that after the secondary stimulation of MRL/lpr mice, the expression of PRRs in innate immune cells was changed, and IFN-related pathways were activated to release a large number of ISGs to promote the secondary response. At the same time, related metabolic modes such as glycolysis were enhanced, and epigenetic changes may occur. Therefore, SLE is brought on, maintained, and worsened by a variety of factors that work together to produce innate immune memory.

Multifunctional phototheranostic agent ZnO@Ag for anti-infection through photothermal/photodynamic therapy.

To overcome the limitations of traditional therapeutics, nanotechnology offers a synergistic therapeutic approach for the treatment of bacterial infection and biofilms that has attracted attention. Herein, we report on a ZnO@Ag nanocomposite with good biocompatibility synthesized by doping ZnO NPs with silver nanoparticles (Ag NPs). ZnO@Ag nanocomposites were synthesized with varying ratios of Ag NPs (0.5%, 2%, 8%). Under the same experimental conditions, ZnO@8%Ag exhibited outstanding properties compared to the other nanocomposites and the pristine ZnO NPs. ZnO@8%Ag demonstrated excellent photothermal and photodynamic properties. Also, ZnO@8%Ag demonstrated over 99% inhibition of Staphylococcus aureus (S. aureus) under photothermal therapy (PTT) or photodynamics therapy (PDT) as a result of the excessive generation of reactive oxygen species (ROS) by the Ag+ released, while the pristine ZnO showed an insignificant inhibition rate compared to the PBS group (control). Furthermore, ZnO@8%Ag completely disrupted S. aureus biofilm under a combined PTT/PDT treatment, a synergetic trimodal therapy, although the molecular mechanism of biofilm inhibition remains unclear. Hence, the excellent photothermal, photodynamic, biocompatibility, and bactericidal properties of ZnO@8%Ag present it as an appropriate platform for bacterial and biofilm treatment or other biomedically related applications.

Application of collagen-chondroitin sulfate scaffolds with different pore sizes combined with acidic fibroblast growth factor in repairing full thickness skin defects in nude mice.

Wound healing of skin defects is complex. For the treatment of large and deep wounds, it is a good alternative to accept artificial dermis grafting at the first stage surgery, and autologous split-thickness skin grafting 2-3 weeks later at the second stage surgery. In addition, the effectiveness of numerous cytokines such as fibroblast growth factor (FGF) on wounds healing has been widely researched. The traditional view is that direct external application orin vivoinjection of exogenous FGFs may not achieve the desired therapeutic effect as the effective concentration cannot be maintained for a long time. Therefore, some researchers have tried to integrate various cytokines into skin substitutes for combined application. However, we believe that considering the current situation, it is still difficult to achieve mass production of these types of artificial dermis. Here, we manufactured a collagen-chondroitin sulfate scaffold material by imitating the marketed artificial dermis materials. Then, we combined it with recombinant human acidic FGF in a single full dose during the first-stage artificial dermis transplantation, which is simple and completely feasible but always controversial in the current clinical work, to explore whether this combinatorial therapy could serve as an efficient way wound healing in the Balb/c-nu mice full-thickness skin defect model.

Photocatalytic Synthesis of Sulfinamides and Sulfoxides from Nitroarenes and Thiophenols.

We present an efficient and versatile visible light-driven methodology for synthesizing sulfinamides and sulfoxides using nitroarenes as the nitrogen source and thiophenols as the sulfur source. The switch-over of the two reaction pathways was achieved by changing the type of photocatalyst and the amount of thiophenol in the reaction mixture. The reaction proceeds under mild conditions with good functional group tolerance and can easily be scaled up.

Visible Light Induced Reduction and Pinacol Coupling of Aldehydes and Ketones Catalyzed by Core/Shell Quantum Dots.

We present an efficient and versatile visible light-driven methodology to transform aryl aldehydes and ketones chemoselectively either to alcohols or to pinacol products with CdSe/CdS core/shell quantum dots as photocatalysts. Thiophenols were used as proton and hydrogen atom donors and as hole traps for the excited quantum dots (QDs) in these reactions. The two products can be switched from one to the other simply by changing the amount of thiophenol in the reaction system. The core/shell QD catalysts are highly efficient with a turn over number (TON) larger than 4 × 104 and 4 × 105 for the reduction to alcohol and pinacol formation, respectively, and are very stable so that they can be recycled for at least 10 times in the reactions without significant loss of catalytic activity. The additional advantages of this method include good functional group tolerance, mild reaction conditions, the allowance of selectively reducing aldehydes in the presence of ketones, and easiness for large scale reactions. Reaction mechanisms were studied by quenching experiments and a radical capture experiment, and the reasons for the switchover of the reaction pathways upon the change of reaction conditions are provided.

Polarization-independent guided-mode resonance filtering by all-dielectric gratings in the terahertz region.

We propose an angular-dependent polarization-insensitive filter in the terahertz (THz) region, based on the guided-mode resonance of one-dimensional zero-contrast grating architectural design. Particle swarm optimization combined with the rigorous coupled-wave analysis method is used to design the filter and investigate the influences of the planes of incidence on the characteristics of the proposed all-dielectric THz filter. With the planes of incidence set at 0°, 30°, 45°, and 60°, the polarization-independent resonances occur at 0.458 THz, 0.459 THz, 0.461 THz, and 0.465 THz under oblique incidences of 9.3°, 10.8°, 13.3°, and 19.2°, respectively, which means the oblique incident angle of the polarization-independent THz filter increases with the rotation of the planes of incidence from classic mounting to fully conical mounting. In addition, for the fully conical mounting case, the resonance has high angular stability and is no longer split, compared with classic incidence; meanwhile, there is only a tiny blue shift in resonance of less than 3 GHz when changing the incident angle from 0° to 10°. The physical mechanism of the spectral characteristics is also analyzed in detail. The spectral properties proposed herein enable significant potential application in the fields of spectroscopy, image sensors, communication, etc., in the THz region.

Spectral characteristics of a guided mode resonant filter with planes of incidence.

Spectral responses of the guided mode resonant filter under different planes of incidence are comprehensively investigated in this paper. Commercially available software based on the rigorous coupled wave analysis method is used to perform the reflectance spectra. For normal incidence, there exists a pair of resonance bands, whose diffraction efficiencies can be tuned from 3.5% to 100% and 3.2% to 100% without shifting the resonant location as the plane of incidence (POI) angle ranges from 0° to 90°, whereas the resonances split into two branches as the POI angle decreases from 90° to 0° for oblique incidence. There exists a crossing point between the split bands that is proved to be polarization independent. Moreover, the physical mechanism of the above spectral characteristics is analyzed in detail by means of the wave vectors. The intensity-tunable feature under normal incidence can be used in the field of bioactive fluorescent protein dyes, displays, and signal processing. And the split characteristic under oblique incidence is applied to seek the polarization-independent wavelength, which has potential applications in the field of dense wavelength division multiplexing and laser devices.

Visible-Light Photocatalytic Synthesis of Amines from Imines via Transfer Hydrogenation Using Quantum Dots as Catalysts.

CdSe/CdS core/shell quantum dots (QDs) can be used as stable and highly active photoredox catalysts for efficient transfer hydrogenation of imines to amines with thiophenol as a hydrogen atom donor. This reaction proceeds via a proton-coupled electron transfer (PCET) from the QDs conduction band to the protonated imine followed by hydrogen atom transfer from the thiophenol to the α-aminoalkyl radical. This precious metal free transformation is easy to scale up and can be carried out by a one-pot protocol directly from aldehyde, amine, and thiophenol.  Additional advantageous features of this protocol include a wide substrate scope, high yield of the amine products, extremely low catalyst loading (0.001 mol %), high turnover number (105), and the mild reaction conditions of using visible light or sun light at room temperature in neutral media.

Silk fibroin for vascular regeneration.

Cardiovascular disease is the primary cause of morbidity and mortality in today's world. Due to the lack of healthy autologous vessels, more tissue-engineered blood vessels are needed to repair or replace the damaged arteries. Biomaterials play an indispensable role in creating a living neovessel with biological responses. Silk fibroin produced by silkworms possesses good cytocompatibility, tailorable biodegradability, suitable mechanical properties, and minimal inflammatory reactions. In addition, regenerated silk fibroin solutions can be processed into various forms of scaffolds such as films, fibers, tubes, and porous sponges. These features make silk fibroin a promising biomaterial for small-diameter vascular grafts. The present article focuses on the applications of silk fibroin for vascular regeneration. A brief overview of the properties of silk fibroin is provided, following which the current research status and future directions of the main types of silk fibroin scaffolds for vascular regeneration are reviewed and discussed. Microsc. Res. Tech. 80:280-290, 2017. © 2015 Wiley Periodicals, Inc.