High performance enrichment and analysis of fluoroquinolones residues in environmental water using cobalt ion mediated paper-based molecularly imprinted polymer chips.

BACKGROUND: Fluoroquinolones (FQs) are widely used for their excellent antimicrobial properties, yet their release into aquatic environments pose risks to ecosystems and public health. The accurate monitoring and analysis of FQs present challenges due to their low concentrations and the complex matrices found in actual environmental samples. To address the need for auto-pretreatment and on-line instrumental analysis, developing new microextraction materials and protocols is crucial. Such advancements will provide better analytical assurance for the effective extraction and determination of FQs at trace levels, which is of great significance to environmental protection and human health. RESULTS: In this work, we presented a Co2+ mediated paper-based molecularly imprinted polymer chip (CMC@Co-MIP), combined with UPLC analysis, to develop an effective analytical method for identifying and quantifying trace amounts of ciprofloxacin (CIP) and enrofloxacin (ENR) in water samples. Notably, the addition of Co2+ in CMC@Co-MIP helped to capture the template molecule CIP through coordination before imprinting, which significantly improved the ordering of the imprinted cavities. CMC@Co-MIP exhibited a maximum adsorption capacity up to 500.20 mg g-1 with an imprinting factor of 4.12, surpassing previous reports by a significant margin. Furthermore, the enrichment mechanism was extensively analyzed by various characterization techniques. The developed method showed excellent repeatability and reproducibility (RSD < 13.0 %) with detection limits ranging from 0.15 to 0.21 µg L-1 and recoveries ranging from 64.9 % to 102.3 % in real spiked water samples. SIGNIFICANCE: We developed a novel microextraction paper-based chip based on Co2+ mediation, which effectively improved the selectivity and convenience of extracting FQs. This breakthrough allowed the chip to have a high enrichment efficiency as well as provide a robust on-line instrumental program. It also confirms that the imprinting scheme based on metal ion coordination is a high-performance strategy.

NIR-triggered arsenic-loaded layered double hydroxide-based films for localized thermal synergistic chemotherapy.

Portal vein tumor thrombus (PVTT) formed by cancer cell invasion is a major cause of high mortality in hepatocellular carcinoma (HCC), and the formation of thrombus will be accelerated by bacterial colonization on the surface of the implant after surgery. In this work, Polypyrrole-coated arsenic-loaded layered double hydroxide films were in situ constructed on the nickel-titanium alloy for the efficient killing of tumour cells by thermo-therapeutic synergistic chemotherapy. The good near-infrared photothermal conversion ability of polypyrrole enables the sample surface temperature to be raised to about 51 °C at a low photothermal power (0.5 w/cm2), while the elevated temperature could further accelerate the release of drug arsenic. In addition, when NIR light is not applied, the polypyrrole coating also cleverly acts as a "barrier layer" to reduce the natural release of arsenic in normal tissues to avoid toxicity issues. In vivo and in vitro experiments have demonstrated that the platform exhibits excellent antitumor and antibacterial abilities. In contrast to the systemic toxicity issues associated with systemic circulation of nanotherapeutic drugs, this in situ functional film is expected to be used in localised interventions for precise drug delivery, and is also more suitable for surgical treatment scenarios in PVTT surgeries.

Postbiotics in inflammatory bowel disease: efficacy, mechanism, and therapeutic implications.

Inflammatory bowel disease (IBD) is one of the most challenging diseases in the 21st century, and more than 10 million people around the world suffer from IBD. Because of the limitations and adverse effects associated with conventional IBD therapies, there has been increased scientific interest in microbial-derived biomolecules, known as postbiotics. Postbiotics are defined as the preparation of inanimate microorganisms and/or their components that confer a health benefit on the host, comprising inactivated microbial cells, cell fractions, metabolites, etc. Postbiotics have shown potential in enhancing IBD treatment by reducing inflammation, modulating the immune system, stabilizing intestinal flora and maintaining the integrity of intestinal barriers. Consequently, they are considered promising adjunctive therapies for IBD. Recent studies indicate that postbiotics offer distinctive advantages, including spanning clinical (safe origin), technological (easy for storage and transportation) and economic (reduced production costs) dimensions, rendering them suitable for widespread applications in functional food/pharmaceutical. This review offers a comprehensive overview of the definition, classification and applications of postbiotics, with an emphasis on their biological activity in both the prevention and treatment of IBD. © 2024 Society of Chemical Industry.

[Clinical application of endoscopic radical mastectomy for breast cancer combined with total pectoral muscle reconstruction with breast implants].

Objective: To investigate the effectiveness of endoscopic radical mastectomy for breast cancer combined with total pectoral muscle reconstruction with breast implants. Methods: The clinical data of 138 female patients with breast cancer who met the selection criteria between April 2019 and December 2023 were retrospectively analyzed. The mean age of the patients was 43.8 years (range, 27-61 years). The maximum diameter of the tumors ranged from 1.00 to 7.10 cm, with an average of 2.70 cm. Pathological examination showed that 108 cases were positive for both estrogen receptor and progesterone receptor, and 40 cases were positive for human epidermal growth factor receptor 2. All patients underwent endoscopic radical mastectomy for breast cancer combined with total pectoral muscle reconstruction with breast implants. The operation time, intraoperative blood loss, prosthesis size, and occurences of nipple-areola complex (NAC) ischemia, flap ischemia, infection, and capsular contracture were recorded. The Breast-Q2.0 score was used to evaluate breast aesthetics, patient satisfaction, and quality of life (including the social mental health score, breast satisfaction score, and chest pain score). Patients were divided into two groups based on the time of operation after the technique was implemented: group A (within 1 year, 25 cases) and group B (after 1 year, 113 cases). The above outcome indicators were compared between the two groups. Furthermore, based on the postoperative follow-up duration, patients were classified into a short-term group (follow-up time was less than 1 year) and a long-term group (follow-up time was more than 1 year). The baseline data and postoperative Breast-Q2.0 scores were compared between the two groups. Results: The average operation time was 120.76 minutes, the average intraoperative blood loss was 23.77 mL, and the average prosthesis size was 218.37 mL. Postoperative NAC ischemia occurred in 21 cases (15.22%), flap ischemia in 30 cases (21.74%), infection in 23 cases (16.67%), capsular contracture in 33 cases (23.91%), and prosthesis removal in 2 cases (1.45%). The operation time of group A was significantly longer than that of group B ( P<0.05), and there was no significant difference in intraoperative blood loss, prosthesis size, and related complications between the two groups ( P>0.05). All patients were followed up 3-48 months (mean, 20 months). There were 33 cases in the short-term group and 105 cases in the long-term group. There was no significant difference in baseline data such as age, body mass index, number of menopause cases, number of neoadjuvant chemotherapy cases, number of axillary lymph node dissection cases, breast cup size, degree of breast ptosis, and postoperative radiotherapy constituent ratio between the two groups ( P>0.05). At last follow-up, the breast satisfaction score in the patients' Breast-Q2.0 score ranged from 33 to 100, with an average of 60.9; the social mental health score ranged from 38 to 100, with an average of 71.3; the chest pain score ranged from 20 to 80, with an average of 47.3. The social mental health score of the long-term group was significantly higher than that of the short-term group ( P<0.05); there was no significant difference in breast satisfaction scores and chest pain scores between the two groups ( P>0.05). No patient died during the follow-up, and 2 patients relapsed at 649 days and 689 days postoperatively, respectively. The recurrence-free survival rate was 98.62%. Conclusion: Endoscopic radical mastectomy for breast cancer combined with total pectoral muscle reconstruction with breast implants has fewer complications and less damage, and the aesthetic effect of reconstructed breast is better.

Selective Tumor Inhibition Effect of Drug-Free Layered Double Hydroxide-Based Films via Responding to Acidic Microenvironment.

Nickel-titanium alloy stents are widely used in the interventional treatment of various malignant tumors, and it is important to develop nickel-titanium alloy stents with selective cancer-inhibiting and antibacterial functions to avoid malignant obstruction caused by tumor invasion and bacterial colonization. In this work, an acid-responsive layered double hydroxide (LDH) film was constructed on the surface of a nickel-titanium alloy by hydrothermal treatment. The release of nickel ions from the film in the acidic tumor microenvironment induces an intracellular oxidative stress response that leads to cell death. In addition, the specific surface area of LDH nanosheets could be further regulated by heat treatment to modulate the release of nickel ions in the acidic microenvironment, allowing the antitumor effect to be further enhanced. This acid-responsive LDH film also shows a good antibacterial effect against S. aureus and E. coli. Besides, the LDH film prepared without the introduction of additional elements maintains low toxicity to normal cells in a normal physiological environment. This work offers some guidance for the design of a practical nickel-titanium alloy stent for the interventional treatment of tumors.

In Situ Gelation Strategy for Efficient Drug Delivery in a Gastrointestinal System.

Developing a microenvironment-responsive drug delivery system (DDS) for the gastrointestinal system is of great interest to enhance drug efficiency and minimize side effects. Unfortunately, the rapid-flowing digestive juice in the gastrointestinal tract and the continuous contraction and peristalsis of the gastrointestinal tract muscle accelerate the elimination of drug carriers. In this study, a boric hydroxyl-modified mesoporous Mg(OH)2 drug carrier is prepared to prolong the drug retention time. Results show that the newly designed DDS presents high biocompatibility and can immediately turn the free polyhydric alcohol molecules into a gelation form. The in situ-formed gelation network presents high viscosity and can prevent the drug carriers from being washed away by the digestive juice in the gastrointestinal tract.

Postbiotics-peptidoglycan, lipoteichoic acid, exopolysaccharides, surface layer protein and pili proteins-Structure, activity in wounds and their delivery systems.

Chronic wound healing is a pressing global public health concern. Abuse and drug resistance of antibiotics are the key problems in the treatment of chronic wounds at present. Postbiotics are a novel promising strategy. Previous studies have reported that postbiotics have a wide range of biological activities including antimicrobial, immunomodulatory, antioxidant and anti-inflammatory abilities. However, several aspects related to these postbiotic activities remain unexplored or poorly known. Therefore, this work aims to outline general aspects and emerging trends in the use of postbiotics for wound healing, such as the production, characterization, biological activities and delivery strategies of postbiotics. In this review, a comprehensive overview of the physiological activities and structures of postbiotic biomolecules that contribute to wound healing is provided, such as peptidoglycan, lipoteichoic acid, bacteriocins, exopolysaccharides, surface layer proteins, pili proteins, and secretory proteins (p40 and p75 proteins). Considering the presence of readily degradable components in postbiotics, potential natural polymer delivery materials and delivery systems are emphasized, followed by the potential applications and commercialization prospects of postbiotics. These findings suggest that the treatment of chronic wounds with postbiotic ingredients will help provide new insights into wound healing and better guidance for the development of postbiotic products.

A thiolated oxidized guar gum and sodium alginate dual-network microspheres with enhanced gastric acid resistance and mucoadhesion for delivery of probiotics.

Probiotics offer numerous beneficial functions for human bodies, while the low survival rate under gastric acid and short retention time in the intestine are the major obstacles to their utilization. To address these issues, we designed a novel dual-network hydrogel microsphere that combines gastric acid resistance with enhanced mucoadhesion, aiming for the targeted delivery of probiotics. Thiolated oxidized guar gum (SOGG) was disulfide-linked to form the first network, and sodium alginate (SA) was cross-linked with Ca2+ to form the second network. Under the protection of the interpenetrating dual network microspheres, a much higher viability of Lactobacillus rhamnosus (LGG) (8.73 log CFU/mL) was achieved in simulated gastric fluid, compared to the zero-survival rate of free LGG. Mucoadhesion tests showed that the adhesion rate of SOGG/SA microspheres to the intestinal mucosa was 1.75 times higher than that of thiol-free microspheres. In vivo studies revealed that LGG-loaded microspheres significantly enhanced intestinal barrier function, remodeled the gut microbiome, and alleviated DSS-induced colitis in mice. Overall, SOGG/SA microspheres provide an effective strategy to the challenges of probiotic reduction in the stomach and rapid expulsion from the intestines, enhancing their health benefits.

Establishment of orthotopic osteosarcoma animal models in immunocompetent rats through muti-rounds of in-vivo selection.

Immunodeficient murine models are usually used as the preclinical models of osteosarcoma. Such models do not effectively simulate the process of tumorigenesis and metastasis. Establishing a suitable animal model for understanding the mechanism of osteosarcoma and the clinical translation is indispensable. The UMR-106 cell suspension was injected into the marrow cavity of Balb/C nude mice. Tumor masses were harvested from nude mice and sectioned. The tumor fragments were transplanted into the marrow cavities of SD rats immunosuppressed with cyclosporine A. Through muti-rounds selection in SD rats, we constructed orthotopic osteosarcoma animal models using rats with intact immune systems. The primary tumor cells were cultured in-vitro to obtain the immune-tolerant cell line. VX2 tumor fragments were transplanted into the distal femur and parosteal radius of New Zealand white rabbit to construct orthotopic osteosarcoma animal models in rabbits. The rate of tumor formation in SD rats (P1 generation) was 30%. After four rounds of selection and six rounds of acclimatization in SD rats with intact immune systems, we obtained immune-tolerant cell lines and established the orthotopic osteosarcoma model of the distal femur in SD rats. Micro-CT images confirmed tumor-driven osteolysis and the bone destruction process. Moreover, the orthotopic model was also established in New Zealand white rabbits by implanting VX2 tumor fragments into rabbit radii and femurs. We constructed orthotopic osteosarcoma animal models in rats with intact immune systems through muti-rounds in-vivo selection and the rabbit osteosarcoma model.

Microinvasion in hepatocellular carcinoma: predictive factor and application for definition of clinical target volume for radiotherapy.

BACKGROUND: To investigate the correlation between microinvasion and various features of hepatocellular carcinoma (HCC), and to clarify the microinvasion distance from visible HCC lesions to subclinical lesions, so as to provide clinical basis for the expandable boundary of clinical target volume (CTV) from gross tumor volume (GTV) in the radiotherapy of HCC. METHODS: HCC patients underwent hepatectomy of liver cancer in our hospital between July 2019 and November 2021 were enrolled. Data on various features and tumor microinvasion distance were collected. The distribution characteristics of microinvasion distance were analyzed to investigate its potential correlation with various features. Tumor size compared between radiographic and pathologic samples was analyzed to clarify the application of pathologic microinvasion to identify subclinical lesions of radiographic imaging. RESULTS: The average microinvasion distance was 0.6 mm, with 95% patients exhibiting microinvasion distance less than 3.0 mm, and the maximum microinvasion distance was 4.0 mm. A significant correlation was found between microinvasion and liver cirrhosis (P = 0.036), serum albumin level (P = 0.049). Multivariate logistic regression analysis revealed that HCC patients with cirrhosis had a significantly lower risk of microinvasion (OR = 0.09, 95%CI = 0.02 ~ 0.50, P = 0.006). Tumor size was overestimated by 1.6 mm (95%CI=-12.8 ~ 16.0 mm) on radiographic size compared to pathologic size, with a mean %Δsize of 2.96% (95%CI=-0.57%~6.50%). The %Δsize ranged from - 29.03% to 34.78%. CONCLUSIONS: CTV expanding by 5.4 mm from radiographic GTV could include all pathologic microinvasive lesions in the radiotherapy of HCC. Liver cirrhosis was correlated with microinvasion and were independent predictive factor of microinvasion in HCC.

Strain- and Electron Doping-Induced In-Plane Spin Orientation at Room Temperature in Single-Layer CrTe2.

Ferromagnets with a Curie temperature surpassing room temperature (RT) are highly sought after for advancing planar spintronics. The ultrathin CrTe2 is proposed as a promising two-dimensional (2D) ferromagnet with a Curie temperature above 300 K. However, its single-layer film is highly susceptible to specific external perturbations, leading to variable magnetic features depending on the environment. The magnetic ordering of single-layer CrTe2 remains a topic of debate, and experimental confirmation of ferromagnetic order at RT is still pending. In our study, we utilized molecular beam epitaxy to create a single-layer 1T-CrTe2 on bilayer graphene, demonstrating ferromagnetism above 300 K with in-plane magnetization through superconducting quantum interference devices (SQUID) measurements. Our density functional theory (DFT) calculations suggest that the ferromagnetic properties stem from epitaxial strain, which increases the distance between adjacent Cr atoms within the layer by about 1.6% and enhances the Cr-Te-Cr angle by approximately 1.6°. Due to its interaction with the graphene substrate, the magnetic moment transitions from an out-of-plane to an in-plane orientation, while electronic doping exceeds 1.5 e/u.c. Combining DFT calculations with in situ scanning tunneling microscopy (STM) characterizations allowed us to determine the configuration of the CrTe2 single layer on graphene. This discovery presents the first experimental proof of ferromagnetic order in single-layer CrTe2 with a Curie temperature above RT, laying the groundwork for future applications of CrTe2 single-layer-based spintronic devices.

Attributable mortality of acute kidney injury among critically ill patients with sepsis: a multicenter, retrospective cohort study.

BACKGROUND: Sepsis and acute kidney injury (AKI) are common severe diseases in the intensive care unit (ICU). This study aimed to estimate the attributable mortality of AKI among critically ill patients with sepsis and to assess whether AKI was an independent risk factor for 30-day mortality. METHODS: The information we used was derived from a multicenter prospective cohort study conducted in 18 Chinese ICUs, focusing on septic patients post ICU admission. The patients were categorized into two groups: those who developed AKI (AKI group) within seven days following a sepsis diagnosis and those who did not develop AKI (non-AKI group). Using propensity score matching (PSM), patients were matched 1:1 as AKI and non-AKI groups. We then calculated the mortality rate attributable to AKI in septic patients. Furthermore, a survival analysis was conducted comparing the matched AKI and non-AKI septic patients. The primary outcome of interest was the 30-day mortality rate following the diagnosis of sepsis. RESULTS: Out of the 2175 eligible septic patients, 61.7% developed AKI. After the application of PSM, a total of 784 septic patients who developed AKI were matched in a 1:1 ratio with 784 septic patients who did not develop AKI. The overall 30-day attributable mortality of AKI was 6.6% (95% CI 2.3 ∼ 10.9%, p = 0.002). A subgroup analysis revealed that the 30-day attributable mortality rates for stage 1, stage 2, and stage 3 AKI were 0.6% (95% CI -5.9 ∼ 7.2%, p = 0.846), 4.7% (95% CI -3.1 ∼ 12.4%, p = 0.221) and 16.8% (95% CI 8.1 ∼ 25.2%, p < 0.001), respectively. Particularly noteworthy was that stage 3 AKI emerged as an independent risk factor for 30-day mortality, possessing an adjusted hazard ratio of 1.80 (95% CI 1.31 ∼ 2.47, p < 0.001). CONCLUSIONS: The overall 30-day attributable mortality of AKI among critically ill patients with sepsis was 6.6%. Stage 3 AKI had the most significant contribution to 30-day mortality, while stage 1 and stage 2 AKI did not increase excess mortality.

Afterglow Performance of Phenylenevinylene-Based Semiconducting Polymer Nanoparticles Doped with Photosensitizers Containing Electron-Withdrawing Groups.

It is usually believed that doping with photosensitizers capable of generating singlet oxygen (1O2) plays a pivotal role in enhancing the afterglow performance of semiconducting polymer nanoparticles (SPNs). However, the effect of doping photosensitizer bearing electron-withdrawing groups has not been reported. Here we report the effect of doping with six photosensitizers possessing different electron-withdrawing groups on the afterglow performance of SPNs using poly[(9,9-di(2-ethylhexyl)-9H-fluo-rene-2,7-vinylene)-co-(1-methoxy-4-(2-ethylhexyloxy)-2,5-phenylenevinylene)] (PF-MEHPPV) as substrate. It was found that the afterglow performance of SPNs was significantly influenced by doping with photosensitizers bearing electron-withdrawing groups. For the doped photosensitizers with strong electron-withdrawing groups, the stronger the electron-withdrawing ability of the group, the worse of the afterglow performance of the SPN regardless of the 1O2 generation ability of the photosensitizer. When the doped photosensitizer exhibited weak or none electron-withdrawing effect, the 1O2 generation ability of the photosensitizer played a dominant role on the afterglow performance of the SPNs. This work deepens the understanding of the design and synthesis of SPNs with different afterglow properties.

Fe3O4@TiO2 Microspheres: Harnessing O2 Release and ROS Generation for Combination CDT/PDT/PTT/Chemotherapy in Tumours.

In the treatment of various cancers, photodynamic therapy (PDT) has been extensively studied as an effective therapeutic modality. As a potential alternative to conventional chemotherapy, PDT has been limited due to the low Reactive Oxygen Species (ROS) yield of photosensitisers. Herein, a nanoplatform containing mesoporous Fe3O4@TiO2 microspheres was developed for near-infrared (NIR)-light-enhanced chemodynamical therapy (CDT) and PDT. Titanium dioxide (TiO2) has been shown to be a very effective PDT agent; however, the hypoxic tumour microenvironment partly affects its in vivo PDT efficacy. A peroxidase-like enzyme, Fe3O4, catalyses the decomposition of H2O2 in the cytoplasm to produce O2, helping overcome tumour hypoxia and increase ROS production in response to PDT. Moreover, Fe2+ in Fe3O4 could catalyse H2O2 decomposition to produce cytotoxic hydroxyl radicals within tumour cells, which would result in tumour CDT. The photonic hyperthermia of Fe3O4@TiO2 could not only directly damage the tumour but also improve the efficiency of CDT from Fe3O4. Cancer-killing effectiveness has been maximised by successfully loading the chemotherapeutic drug DOX, which can be released efficiently using NIR excitation and slight acidification. Moreover, the nanoplatform has high saturation magnetisation (20 emu/g), making it suitable for magnetic targeting. The in vitro results show that the Fe3O4@TiO2/DOX nanoplatforms exhibited good biocompatibility as well as synergetic effects against tumours in combination with CDT/PDT/PTT/chemotherapy.

Probe-Type Multi-Core Fiber Optic Sensor for Simultaneous Measurement of Seawater Salinity, Pressure, and Temperature.

In this article, we propose and demonstrate a probe-type multi-core fiber (MCF) sensor for the multi-parameter measurement of seawater. The sensor comprises an MCF and two capillary optical fibers (COFs) with distinct inner diameters, in which a 45° symmetric core reflection (SCR) structure and a step-like inner diameter capillary (SIDC) structure filled with polydimethylsiloxane (PDMS) are fabricated at the fiber end. The sensor is equipped with three channels for different measurements. The surface plasmon resonance (SPR) channel (CHSPR) based on the side-polished MCF is utilized for salinity measurement. The fiber end air cavity, forming the Fabry-Pérot interference (FPI) channel (CHFPI), is utilized for pressure and temperature measurement. Additionally, the fiber Bragg grating (FBG) channel (CHFBG), which is inscribed in the central core, serves as temperature compensation for the measurement results. By combining three sensing principles with space division multiplexing (SDM) technology, the sensor overcomes the common challenges faced by multi-parameter sensors, such as channel crosstalk and signal demodulation difficulties. The experimental results indicate that the sensor has sensitivities of 0.36 nm/‱, -10.62 nm/MPa, and -0.19 nm/°C for salinity, pressure, and temperature, respectively. As a highly integrated and easily demodulated probe-type optical fiber sensor, it can serve as a valuable reference for the development of multi-parameter fiber optic sensors.

MGP+ and IDO1+ tumor-associated macrophages facilitate immunoresistance in breast cancer revealed by single-cell RNA sequencing.

Immunotherapy is widely applied for the treatment of breast cancer, but to which some patients respond poorly or develop resistance. Therefore, the mechanism needs to be further studied. Transcriptomic data of 31 breast cancer patients treated with anti-programmed death receptor 1 (PD-1) was downloaded from the VIB-KULeuven Center for Cancer Biology to analyze the changes in myeloid cells in tumor tissues before and after immunotherapy. And 24 cell populations that may be immune-related were further identified. Representative cell populations were also screened and validated through cellular and animal experiments to evaluate the relevant molecular expression and pathways of tumor-associated macrophages (TAMs) in the tumor microenvironment. The results demonstrated that MGP+ TAMs and IDO1+ TAMs influenced the efficacy of immunotherapy in breast cancer patients. After anti-PD-1 treatment, Increased numbers of MGP+ TAMs and IDO1+ TAMs in breast cancer patients upregulated pro-tumorigenic factors associated with resistance to immunosuppressive therapy. This study provides new biomarkers for immunotherapy to predict therapeutic responses and overcome potential resistance to immunotherapy. It is an important complement to the immunosuppression caused by TAMs after immunotherapy for breast cancer.

Attributable mortality of ARDS among critically ill patients with sepsis: a multicenter, retrospective cohort study.

BACKGROUND: Both sepsis and acute respiratory distress syndrome (ARDS) are common severe diseases in the intensive care unit (ICU). There is no large-scale multicenter study to clarify the attributable mortality of ARDS among septic patients. This study aimed to evaluate the excess mortality of ARDS in critically ill patients with sepsis. METHODS: The data were obtained from a multicenter, prospective cohort study in 18 Chinese ICUs between January 2014 and August 2015. The study population was septic patients after ICU admission. The patients were categorized into two groups: those who developed ARDS (ARDS group) within seven days following a sepsis diagnosis and those who did not develop ARDS (non-ARDS group). Applying propensity score matching (PSM), patients were matched 1:1 as ARDS and non-ARDS groups. Mortality attributed to ARDS was calculated. Subsequently, we conducted a survival analysis to estimate the impact of ARDS on mortality. The primary endpoint was 30-day mortality after sepsis diagnosis. RESULTS: 2323 septic patients were eligible, 67.8% developed ARDS. After PSM, 737 patients with ARDS were matched 1:1 with 737 non-ARDS patients. ARDS's overall 30-day attributable mortality was 11.9% (95% CI 7.5-16.3%, p < 0.001). Subgroup analysis showed that the 30-day attributable mortality of mild, moderate, and severe ARDS was 10.5% (95% CI 4.0-16.8%, p < 0.001), 11.6% (95% CI 4.7-18.4%, p < 0.001) and 18.1% (95% CI 4.5-30.9%, p = 0.006), respectively. ARDS was an independent risk factor for 30-day mortality, with adjusted hazard ratios of 1.30 (95% CI 1.03-1.64, p = 0.027), 1.49 (95% CI 1.20-1.85, p < 0.001), and 1.95 (95% CI 1.51-2.52, p < 0.001) for mild, moderate, and severe ARDS, respectively. CONCLUSIONS: The overall 30-day attributable mortality of ARDS among critically ill patients with sepsis was 11.9%. Compared with mild and moderate ARDS, severe ARDS contributed more to death. ARDS was significantly associated with an increase in the 30-day mortality.

Dual Factor-Loaded Artificial Periosteum Accelerates Bone Regeneration.

In the clinic, inactivation of osteosarcoma using microwave ablation would damage the periosteum, resulting in frequent postoperative complications. Therefore, the development of an artificial periosteum is crucial for postoperative healing. In this study, we prepared an artificial periosteum using silk fibroin (SF) loaded with stromal cell-derived factor-1α (SDF-1α) and calcitonin gene-related peptide (CGRP) to accelerate bone remodeling after the microwave ablation of osteosarcoma. The prepared artificial periosteum showed a sustained release of SDF-1α and CGRP after 14 days of immersion. In vitro culture of rat periosteal stem cells (rPDSCs) demonstrated that the artificial periosteum is favorable for cell recruitment, the activity of alkaline phosphatase, and bone-related gene expression. Furthermore, the artificial periosteum improved the tube formation and angiogenesis-related gene expression of human umbilical vein endothelial cells (HUVECs). In an animal study, the periosteum in the femur of a rabbit was inactivated through microwave ablation and then removed. The damaged periosteum was replaced with the as-prepared artificial periosteum and favored bone regeneration. In all, the designed dual-factor-loaded artificial periosteum is a promising strategy to replace the damaged periosteum in the therapy of osteosarcoma for a better bone-rebuilding process.

Low pressure reversibly driving colossal barocaloric effect in two-dimensional vdW alkylammonium halides.

Plastic crystals as barocaloric materials exhibit the large entropy change rivalling freon, however, the limited pressure-sensitivity and large hysteresis of phase transition hinder the colossal barocaloric effect accomplished reversibly at low pressure. Here we report reversible colossal barocaloric effect at low pressure in two-dimensional van-der-Waals alkylammonium halides. Via introducing long carbon chains in ammonium halide plastic crystals, two-dimensional structure forms in (CH3-(CH2)n-1)2NH2X (X: halogen element) with weak interlayer van-der-Waals force, which dictates interlayer expansion as large as 13% and consequently volume change as much as 12% during phase transition. Such anisotropic expansion provides sufficient space for carbon chains to undergo dramatic conformation disordering, which induces colossal entropy change with large pressure-sensitivity and small hysteresis. The record reversible colossal barocaloric effect with entropy change ΔSr ~ 400 J kg-1 K-1 at 0.08 GPa and adiabatic temperature change ΔTr ~ 11 K at 0.1 GPa highlights the design of novel barocaloric materials by engineering the dimensionality of plastic crystals.

CD63+ cancer-associated fibroblasts confer CDK4/6 inhibitor resistance to breast cancer cells by exosomal miR-20.

Cyclin-dependent kinase 4 (CDK4) and CDK6 inhibitors (CDK4/6i) have rapidly received Food and Drug Administration (FDA) approval as a new type of therapy for patients with advanced hormone receptor-positive breast cancer. However, with the widespread application of CDK4/6i, drug resistance has become a new challenge for clinical practice and has greatly limited the treatment effect. Here, the whole microenvironment landscape of ER+ breast cancer tumors was revealed through single-cell RNA sequencing, and a specific subset of cancer-associated fibroblasts (CD63+ CAFs) was identified as highly enriched in CDK4/6i resistant tumor tissues. Then, we found that CD63+ CAFs can distinctly promote resistance to CDK4/6i in breast cancer cells and tumor xenografts. In addition, it was discovered that miR-20 is markedly enriched in the CD63+ CAFs-derived exosomes, which are used to communicate with ER+ breast cancer cells, leading to CDK4/6i resistance. Furthermore, exosomal miR-20 could directly target the RB1 mRNA 3'UTR and negatively regulate RB1 expression to decrease CDK4/6i sensitivity in breast cancer cells. Most importantly, we designed and synthesized cRGD-miR-20 sponge nanoparticles and found that they can enhance the therapeutic effect of CDK4/6i in breast cancer. In summary, our findings reveal that CD63+ CAFs can promote CDK4/6i resistance via exosomal miR-20, which induces the downregulation of RB1 in breast cancer cells, and suggest that CD63+ CAFs may be a novel therapeutic target to enhance CDK4/6i sensitivity.