RESUMEN
Hydrogen cyanide (HCN) is a toxic industrial chemical, necessitating low-level detection capabilities for safety and environmental monitoring. This study introduces a novel approach for detecting hydrogen cyanide (HCN) using a clamp-type custom quartz tuning fork (QTF) integrated with a dual-tube acoustic micro-resonator (AmR) for enhanced photoacoustic gas sensing. The design and optimization of the AmR geometry were guided by theoretical simulation and experimental validation, resulting in a robust on-beam QEPAS (Quartz-Enhanced Photoacoustic Spectroscopy) configuration. To boost the QEPAS sensitivity, an Erbium-Doped Fiber Amplifier (EDFA) was incorporated, amplifying the laser power by approximately 286 times. Additionally, a transformer-based U-shaped neural network, a machine learning filter, was employed to refine the photoacoustic signal and reduce background noise effectively. This combination yielded a significantly low detection limit for HCN at 0.89 parts per billion (ppb) with a rapid response time of 1â¯second, marking a substantial advancement in optical gas sensing technologies. Key modifications to the QTF and innovative use of AmR lengths were validated under various experimental conditions, affirming the system's capabilities for real-time, high-sensitivity environmental monitoring and industrial safety applications. This work not only demonstrates significant enhancements in QEPAS but also highlights the potential for further technological advancements in portable gas detection systems.
RESUMEN
In the course of clinical treatment for anti-tumor, the combination of traditional Chinese medicine (TCM) and other treatment schemes can reduce toxicity and increase efficiency. The purpose of this paper is to find out the key TCM and effective components for the treatment of non-small cell lung cancer (NSCLC) and analyze its therapeutic mechanism by analyzing the prescription of TCM combined with chemotherapy for NSCLC. Firstly, the prescriptions of TCM in the randomized controlled trials combined with chemotherapy for NSCLC were collected, and the core TCM was screened by frequency statistics, association rule analysis, and cluster analysis. Then, the intersection targets of the potential effects of NSCLC and core Chinese medicine were collected, and PPI analysis and enrichment analysis were performed on the intersection targets to screen the core targets, components, and pathways. The core components were verified by molecular docking and cell experiments. In this study, 269 prescriptions were collected, among which the frequency of medication for Astragalus membranaceus (HQ, in Chinese), Wolfiporia cocos (FL, in Chinese), and Atractylodes macrocephala (BZ, in Chinese) was over 100. Association rule analysis showed that they were highly correlated and clustered into the same category in cluster analysis. Their core components were quercetin, kaempferol, and isorhamnetin. The molecular docking results of the core components with the core targets AKT1 and EGFR obtained by PPI network analysis showed that they could bind stably. KEGG analysis screened 110 pathways including PI3K-Akt; the results of CCK-8 showed that quercetin, kaempferol, and isorhamnetin could effectively inhibit the proliferation of A549 cells, and isorhamnetin had the best inhibitory effect. Isorhamnetin can inhibit the migration and invasion of A549 cells, induce apoptosis and G1 phase arrest, and decrease the expression of P-PI3K and P-AKT in A549 cells. In a word, the key TCM for the treatment of NSCLC includes HQ, FL, and BZ. and its key components quercetin, kaempferol, and isorhamnetin have potential therapeutic effects on NSCLC according to the research results.
RESUMEN
The traditional fermentation process of soy sauce employs a hyperhaline model and has a long fermentation period. A hyperhaline model can improve fermentation speed, but easily leads to the contamination of miscellaneous bacteria and fermentation failure. In this study, after the conventional koji and moromi fermentation, the fermentation broth was pasteurized and diluted, and then inoculated with three selected microorganisms including Corynebacterium glutamicum, Corynebacterium ammoniagenes, and Lactiplantibacillus plantarum for secondary fermentation. During this ten-day fermentation, the pH, free amino acids, organic acids, nucleotide acids, fatty acids, and volatile compounds were analyzed. The fermentation group inoculated with C. glutamicum accumulated the high content of amino acid nitrogen of 0.92 g/100 mL and glutamic acid of 509.4 mg/100 mL. The C. ammoniagenes group and L. plantarum group were rich in nucleotide and organic acid, respectively. The fermentation group inoculated with three microorganisms exhibited the best sensory attributes, showing the potential to develop a suitable fermentation method. The brewing speed of the proposed process in this study was faster than that of the traditional method, and the umami substances could be significantly accumulated in this low-salt fermented model (7% w/v NaCl). This study provides a reference for the low-salt and rapid fermentation of seasoning.
RESUMEN
Owing to the lack of selection and limited intelligence in mechanical picking, some immature tomatoes that contain alkaloids are thrown away. Tomatine alkaloids are steroidal alkaloids naturally present in Solanaceae plants, which are distributed in small amounts in immature tomato fruits and decrease as the fruits ripen. Tomato glycoalkaloids are harmful to human health. However, in small quantities, there is some evidence that these compounds might be beneficial, as other non-antioxidant bioactivities. This article considers recent research on the biological effects of tomato glycoalkaloids in immature tomatoes, providing reference value for the potential development of these compounds.
Asunto(s)
Alcaloides , Solanaceae , Solanum lycopersicum , Humanos , Tomatina/toxicidad , Alcaloides/toxicidad , Extractos Vegetales/farmacologíaRESUMEN
This paper presents a two-axis AlScN-based water-immersible MEMS mirror fabricated in an 8-inch MEMS process. Compared with other studies, this device has a larger optical aperture 10 mm in diameter. The resonant frequencies of the device are 1011 Hz in air and 342 Hz in water. The scanning angle reaches ±5° and ±2° at resonant frequencies in air and water, respectively. The cavitation phenomenon is observed when the device is operating in water, which leads the device to electrical failure. To address this issue, a device with reduced resonant frequencies-246 Hz and 152 Hz in air and water-is characterized, through which the bubbles can be effectively prohibited. This MEMS mirror could potentially be used in ultrasound and photoacoustic microscopy applications.
RESUMEN
Starchy foods are an essential part of people's daily diet. Starch is the primary substance used by plants to store carbohydrates, and it is the primary source of energy for humans and animals. In China, a variety of plants, including edible medicinal plants, such as Pueraria root, yam tuber and coix seed, are rich in starch. However, limited by their inherent properties, kudzu starch and other starches are not suitable for the modern food industry. Natural starch is frequently altered by physical, chemical, or biological means to give it superior qualities to natural starch as it frequently cannot satisfy the demands of industrial manufacturing. Therefore, the deep processing market of modified starch and its products has a great potential. This paper reviews the modification methods which can provide excellent functional, rheological, and processing characteristics for these starches that can be used to improve the physical and chemical properties, texture properties, and edible qualities. This will provide a comprehensive reference for the modification and application of starch from medicinal and edible plants.
RESUMEN
A novel all-solid-state thin-film lithium-ion battery (LIB) is presented to address the trade-off issue between the specific capacity and stabilities in a conventional LIB. Different from the conventional one, this LIB device consists of two same LIB components located at the front and back surfaces of the substrate, respectively. These two LIB components form parallel connection by using the conductive through vias distributed in the substrate. Compared with the conventional one, this LIB device doubles the areal specific capacity. More importantly, due to the stress-compensation effect, this device effectively suppresses the stress induced by its volume changes resulting from the lithiation/delithiation processes and thermal expansion. Consequently, this device shows good cycling and thermal stabilities even when working at an industrial-grade high temperature of 125 °C. To further improve the specific capacity without sacrificing the stabilities, a 3D stacked LIB is successfully realized by using this LIB device as the cell, in which each cell is parallelly connected by using the above-mentioned conductive through vias. This 3D stacked LIB is experimentally demonstrated to obtain high specific capacity (79.9 µAh cm-2) and good stabilities (69.3% of retained capacity after 100 cycles at 125 °C) simultaneously.
RESUMEN
Polyguluronate (PG) is a fermentable polysaccharide from edible algae. The present study was designed to investigate the therapeutic effect of PG on ulcerative colitis (UC) and its underlying mechanisms. Our results suggest that oral intake of PG attenuates UC and improves gut microbiota dysbiosis by promoting the growth of Lactobacillus spp. in dextran sulfate sodium-fed mice. Five different species of Lactobacillus were isolated from the feces of PG-treated mice and L. murinus was identified to have the best anti-colitis effect, suggesting a critical role for L. murinus in mediating the therapeutic effect of PG. Furthermore, PG was degraded potentially by the beta-glucuronidase from L. murinus and adding PG to the culture medium of L. murinus remarkably increased its production of anti-inflammatory metabolites, including itaconic acid, cis-11,14-eicosadienoic acid, and 3-amino-3-(2-chlorophenyl)-propionic acid. Additionally, L. salivarius, a human intestine-derived PG-utilizing species that is closely related to L. murinus, was also demonstrated to have potent anti-colitis effects, suggesting that it is a candidate target of PG in the human gut. Altogether, our study illustrates an unprecedented application of PG in the treatment of UC and establishes the basis for understanding its therapeutic effect from the perspective of L. murinus and its metabolites.
Asunto(s)
Colitis Ulcerosa , Colitis , Polisacáridos Bacterianos , Humanos , Animales , Ratones , Colitis Ulcerosa/inducido químicamente , Colitis Ulcerosa/tratamiento farmacológico , Colitis Ulcerosa/metabolismo , Lactobacillus , Colitis/metabolismo , Antiinflamatorios/farmacología , Antiinflamatorios/metabolismo , Sulfato de Dextran , Modelos Animales de Enfermedad , Colon/metabolismo , Ratones Endogámicos C57BLRESUMEN
Global coronavirus disease 2019 (COVID-19) pandemic still threatens human health and public safety, and the development of effective antiviral agent is urgently needed. The SARS-CoV-2 main protease (Mpro) and papain-like protease (PLpro) are vital proteins in viral replication and promising therapeutic targets. Additionally, PLpro also modulates host immune response by cleaving ubiquitin and interferon-stimulated gene product 15 (ISG15) from ISGylated host proteins. In this report, we identified [1,2]selenazolo[5,4-c]pyridin-3(2H)-one and benzo[d]isothiazol-3(2H)-one as attractive scaffolds of PLpro and Mpro inhibitors. The representative compounds 6c and 7e exhibited excellent PLpro inhibition with percent inhibition of 42.9% and 44.9% at 50 nM, respectively. The preliminary enzyme kinetics experiment and fluorescent labelling experiment results determined that 6c was identified as a covalent PLpro inhibitor, while 7e was a non-covalent inhibitor. Molecular docking and dynamics simulations revealed that 6c and 7e bound to Zn-finger domain of PLpro. Compounds 6c and 7e were also identified to potent Mpro inhibitors, and they exhibited potent antiviral activities in SARS-CoV-2 infected Vero E6 cells, with EC50 value of 3.9 µM and 7.4 µM, respectively. In addition, the rat liver homogenate half-life of 6c and 7e exceeded 24 h. These findings suggest that 6c and 7e are promising led compounds for further development of PLpro/Mpro dual-target antiviral drugs.
Asunto(s)
COVID-19 , Proteasas Similares a la Papaína de Coronavirus , Inhibidores de Proteasa de Coronavirus , Animales , Humanos , Ratas , Antivirales/farmacología , Colorantes , Endopeptidasas , Simulación del Acoplamiento Molecular , Péptido Hidrolasas , SARS-CoV-2 , Inhibidores de Proteasa de Coronavirus/química , Inhibidores de Proteasa de Coronavirus/farmacología , Proteasas Similares a la Papaína de Coronavirus/antagonistas & inhibidoresRESUMEN
Human beings have made significant progress in the medical field since antibiotics were widely used. However, the consequences caused by antibiotics abuse have gradually shown their negative effects. Antibacterial photodynamic therapy (aPDT) has the ability to resist drug-resistant bacteria without antibiotics, and as it is increasingly recognized that nanoparticles can effectively solve the deficiency problem of singlet oxygen produced by photosensitizers, the application performance and scope of aPDT are gradually being expanded. In this study, we used a biological template method to reduce Ag+ to silver atoms in situ with bovine serum albumin (BSA) rich in various functional groups in a 50 °C water bath. The aggregation of nanomaterials was inhibited by the protein's multistage structure so that the formed nanomaterials have good dispersion and stability. It is unexpected that we used chitosan microspheres (CMs) loaded with silver nanoparticles (AgNPs) to adsorb methylene blue (MB), which is both a pollutant and photosensitive substance. The Langmuir adsorption isothermal curve was used to fit the adsorption capacity. The exceptional multi-bond angle chelating forceps of chitosan make it have a powerful physical adsorption capacity, and dehydrogenated functional groups of proteins with negative charge can also bond to positively charged MB to form a certain amount of ionic bonds. Compared with single bacteriostatic materials, the bacteriostatic capacity of the composite materials adsorbing MB under light was significantly improved. This composite material not only has a strong inhibitory effect on Gram-negative bacteria but also has a good inhibitory effect on the growth of Gram-positive bacteria poorly affected by conventional bacteriostatic agents. In conclusion, the CMs loaded with MB and AgNPs have some possible applications in the purification or treatment of wastewater in the future.
RESUMEN
Resistance of Capsicum annuum to Phytophthora blight is dependent on the genetic background of the resistance source and the Phytophthora capsici isolate, which poses challenges for development of generally applicable molecular markers for marker-assisted selection. In this study, the resistance to P. capsici of C. annuum was genetically mapped to chromosome 5 within a 1.68-Mb interval by genome-wide association study analysis of 237 accessions. In this candidate region, 30 KASP markers were developed using genome resequencing data for a P. capsici-resistant line (0601 M) and a susceptible line (77,013). Seven of these KASP markers, located in the coding region of a probable leucine-rich repeats receptor-like serine/threonine-protein kinase gene (Capana05g000704), were validated in the 237 accessions, which showed an average accuracy of 82.7%. The genotyping of the seven KASP markers strongly corresponded with the phenotype of 42 individual plants in a pedigree family (PC83-163) developed from the P. capsici-resistant line CM334. This research provides a set of efficient and high-throughput KASP markers for marker-assisted selection of resistance to P. capsici in C. annuum. Supplementary Information: The online version contains supplementary material available at 10.1007/s11032-023-01367-3.
RESUMEN
We propose Destin2, a novel statistical and computational method for cross-modality dimension reduction, clustering, and trajectory reconstruction for single-cell ATAC-seq data. The framework integrates cellular-level epigenomic profiles from peak accessibility, motif deviation score, and pseudo-gene activity and learns a shared manifold using the multimodal input, followed by clustering and/or trajectory inference. We apply Destin2 to real scATAC-seq datasets with both discretized cell types and transient cell states and carry out benchmarking studies against existing methods based on unimodal analyses. Using cell-type labels transferred with high confidence from unmatched single-cell RNA sequencing data, we adopt four performance assessment metrics and demonstrate how Destin2 corroborates and improves upon existing methods. Using single-cell RNA and ATAC multiomic data, we further exemplify how Destin2's cross-modality integrative analyses preserve true cell-cell similarities using the matched cell pairs as ground truths. Destin2 is compiled as a freely available R package available at https://github.com/yuchaojiang/Destin2.
RESUMEN
We present a new magnetometry method integrating an ensemble of nitrogen-vacancy (NV) centers in a single-crystal diamond with an extended dynamic range for monitoring a fast changing magnetic-field. The NV-center spin resonance frequency is tracked using a closed-loop frequency locked technique with fast frequency hopping to achieve a 10 kHz measurement bandwidth, thus allowing for the detection of fast changing magnetic signals up to 0.723 T/s. This technique exhibits an extended dynamic range subjected to the working bandwidth of the microwave source. This extended dynamic range can reach up to 4.3 mT, which is 86 times broader than the intrinsic dynamic range. The essential components for NV spin control and signal processing, such as signal generation, microwave frequency control, data processing, and readout, are integrated in a board-level system. With this platform, we demonstrate a broadband magnetometry with an optimized sensitivity of 4.2 nT Hz-1/2. This magnetometry method has the potential to be implemented in a multichannel frequency locked vector magnetometer suitable for a wide range of practical applications, such as magnetocardiography and high-precision current sensors.
RESUMEN
We previously designed a dual-axis piezoelectric MEMS mirror with a low crosstalk gimbal structure, which is utilized as the key device for further research for laser beam scanning. This paper mainly focuses on studying the Lissajous scanning resolution of this MEMS mirror with frequency ratio and phase modulation. For accurately evaluating the scanning resolution, the center angular resolution of Lissajous scanning is redefined by theoretical calculation and verified with experimental measurement. Meanwhile, the scanning nonlinearity of MEMS mirror is studied carefully. Finally, the MEMS mirror works at the state of pseudo-resonance, and the center angular resolution better than 0.16° (H) × 0.03° (V) is achieved at a scanning Field of view (FoV) of 35.0° (H) × 16.5° (V). Moreover, a feasible route of resolution adjustable Lissajous scanning is provided by optimization of frequency ratio and phase modulation, which is helpful for high definition and high frame rate (HDHF) laser scanning imaging with the dual-axis mirror.
RESUMEN
This paper presents AlScN piezoelectric two-axis MEMS mirrors with gimbal-less and gimbaled designs fabricated in a CMOS-compatible manner. Integrated piezoelectric sensors provided feedback signals of the actual mirror positions. The mirror with a diameter of 1.5 mm possessed adjustable optical tilt angles of up to 22.6° @ 30 V, with a high resonance frequency of about 8.2 kHz, while the 3 mm mirror reached 48.5° @ 41 V. The mirror with the gimbaled structure exhibited an excellent field of view and good mechanical decoupling. Additionally, a significant improvement in mirror scanning performance was observed in a vacuum (4 Pa), proving that the optical field of view was magnified by more than a factor of 10.
RESUMEN
Pepper (Capsicum spp.) is an important vegetable crop that provides a unique pungent sensation when eaten. Through construction of a pepper variome map, we examined the main groups that emerged during domestication and breeding of C. annuum, their relationships and temporal succession, and the molecular events underlying the main transitions. The results showed that the initial differentiation in fruit shape and pungency, increase in fruit weight, and transition from erect to pendent fruits, as well as the recent appearance of large, blocky, sweet fruits (bell peppers), were accompanied by strong selection/fixation of key alleles and introgressions in two large genomic regions. Furthermore, we identified Up, which encodes a BIG GRAIN protein involved in auxin transport, as a key domestication gene that controls erect vs pendent fruit orientation. The up mutation gained increased expression especially in the fruit pedicel through a 579-bp sequence deletion in its 5' upstream region, resulting in the phenotype of pendent fruit. The function of Up was confirmed by virus-induced gene silencing. Taken together, these findings constitute a cornerstone for understanding the domestication and differentiation of a key horticultural crop.
Asunto(s)
Capsicum , Frutas , Frutas/genética , Domesticación , Fitomejoramiento , Capsicum/genética , FenotipoRESUMEN
The abuse of fluoroquinolones (FQs) antibiotics leads to bacterial resistance and environmental pollution, so it is of great significance to verify the decomposition mechanism for eliminating antibiotic efficiently and conveniently. The effects of various environmental factors and the fleroxacin (FLE) photodegradation mechanisms were investigated by high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS), UV-Vis absorption spectroscopy, fluorescence spectroscopy and quantum chemical calculation. Six possible photodegradation reaction paths on T1 (excited triplet state) were proposed and simulated. The departure of the piperazine ring and the substitution of F atom at C-6 position by OH group were determined as the main reactions based on the reaction rates and energy barriers of each path. The multi-pathway reactions resulted in the fastest photodegradation rates of FLE at pH 6-7 than other pH conditions. NaN3 would promote FLE photodegradation by inhibiting the reverse reaction of the separation process of F atom at C-8 and the generation of biphenyl molecules, which was a novel and distinctive phenomenon in this report. ·OH would rapidly combine with the free radicals generated in photolysis processes and made a great contribution to FLE photodegradation. Ca2+, Mg2+ and Ba2+ could stabilize the carboxyl group to impede the photo-competitive process of the decarboxylation reaction, while NO3- could generate reactive oxygen species to promote photodegradation.
Asunto(s)
Fleroxacino , Contaminantes Químicos del Agua , Antibacterianos/química , Fleroxacino/química , Fluoroquinolonas , Cinética , Fotólisis , Piperazinas , Especies Reactivas de Oxígeno , Contaminantes Químicos del Agua/químicaRESUMEN
KEY MESSAGE: Genome re-sequencing and recombination analyses identified Capana06g000193 as a strong candidate for the minor male fertility restoration locus Rf2 in chili pepper G164 harboring two dominant male fertility restoration genes. Male fertility restoration genes of chili pepper restorer line G164 (Capsicum annuum L.) were studied using molecular marker genotypes of an F2 population (7G) of G164 crossed with the cytoplasmic male sterility line 77013A. The ratio of sterile to fertile single plants in the F2 population was 1:15. This result indicates that chili pepper G164 has two dominant restoration genes, which we designated as Rf1 and Rf2. An individual plant recessive for Rf1 and heterozygous for Rf2, 7G-112 (rf1rf1Rf2rf2), was identified by molecular marker selection and genetic analysis, and a single Rf2 gene-segregating population with a 3:1 ratio of fertile to sterile plants was developed from the self-pollination of male fertile individuals of 77013A and 7G-112 hybrid progeny. Bulk segregant analysis of fertile and sterile pools from the segregating populations was used to genetically map Rf2 to a 3.1-Mb region on chromosome 6. Rf2 was further narrowed to a 179.3-kb interval through recombination analysis of molecular markers and obtained the most likely candidate gene, Capana06g000193.
Asunto(s)
Capsicum , Capsicum/genética , Fertilidad/genética , Genes de Plantas , Marcadores Genéticos , Humanos , Infertilidad Vegetal/genéticaRESUMEN
The large conjugated system and the d orbitals of metallic phthalocyanines (MPcs) are easily triggered by solvent molecules and light to cause variations in photo-physical and photo-chemical properties. To clarify the novel properties of photo-excited MPcs in solvents, the steady/transient state spectral data were collected to investigate four MPc templates, including FePc, ZnPc, CoPc and AlClPc. The Q bands of FePc and CoPc were prone to redshift, while the peaks of ZnPc and AlClPc tended to blueshift in various solvents compared with that in DMSO. With xenon lamp irradiation, the characteristic absorption peak intensity of FePc and ZnPc in DMSO decreased gradually and then increased after being subjected to dark condition. The transient absorption spectra and kinetic data illustrated that photo-excited FePc and CoPc produced relatively short lifetime transient intermediates. The positive absorption at 650 nm in the Q bands of FePc and CoPc could be assigned to the d-π* electron transition in transient intermediates with unpaired d-orbital electron in the open shell configuration of Fe2+ and Co2+. The above studies were of great significance for the application of solvent-triggered and photo-induced novel properties of MPcs.
RESUMEN
Accurate and efficient measurements of the piezoelectric properties of AlN and AlScN films are very important for the design and simulation of micro-electro-mechanical system (MEMS) sensors and actuator devices. In this study, a process control monitor (PCM) structure compatible with the device manufacturing process is designed to achieve accurate determination of the piezoelectric coefficients of MEMS devices. Double-beam laser interferometry (DBLI) and laser Doppler vibrometry (LDV) measurements are applied and combined with finite element method (FEM) simulations, and values of the piezoelectric parameters d33 and d31 are simultaneously extracted. The accuracy of d31 is verified directly by using a cantilever structure, and the accuracy of d33 is verified by in situ synchrotron radiation X-ray diffraction; the comparisons confirm the viability of the results obtained by the novel combination of LDV, DBLI and FEM techniques in this study.