Quadrilateral plate classification program of acetabular fractures based on three-column classification: a three-dimensional fracture mapping study.

BACKGROUND: A new classification system for acetabular fractures has been proposed in recent years, which is called the 3-column classification. However, this system does not provide information regarding quadrilateral plate fractures. To address this issue, we utilized three-dimensional (3D) fracture line mapping and heat map to analyze the link between the 3-column classification and quadrilateral plate fractures. METHODS: We collected CT scan data from 177 patients who had been diagnosed with acetabular fractures. Additionally, we utilized a CT scan of a healthy adult to generate a standard acetabular model. We utilized the collected CT data of the fracture to create a 3D model and subsequently reduced it. We then matched each acetabular fracture model with the standard acetabular model and mapped all of the fracture lines to the standard model. 3D fracture lines and heat maps were created by overlapping all fracture lines. Fracture characteristics were then summarized using these maps. RESULTS: This study analyzed a total of 221 acetabular fractures. The most frequently observed fracture type, based on the three-column classification, was A1.2, which corresponds to fractures of the anterior column. In contrast, the least common type of fracture was A4, which represents fractures of the central wall. It was noted that quadrilateral plate fractures were frequently observed in fractures classified as type B and C according to the three-column classification. CONCLUSIONS: Among the three-column classification, the QLP fractures are commonly observed in type B and C. It is important to carefully identify these fractures during the diagnostic process. Therefore, based on the three-column classification, we have amalgamated quadrilateral plate fractures and formulated a classification program for acetabular fractures.

ColorNetVis: An Interactive Color Network Analysis System for Exploring the Color Composition of Traditional Chinese Painting.

In the field of digital humanities, color research aims to discover explanations for painting history and color usage habits. However, researchers analyzing color relationships is challenging and time-consuming, as it requires color extraction and a detailed review of many painting images for reference and comparison of color relationships. In our work, we propose ColorNetVis, an interactive color network analysis tool that enables researchers to explore color relationships through color networks. The core of ColorNetVis is a bipartite network model that establishes a bipartite relationship between colors and Chinese painting within a scope based on color difference measurement. It constructs a one-mode color network through projection algorithms and similarity calculation methods to discover the relationship between colors. We propose a coordinated set of views to demonstrate the combination of determined color networks with painting types and real-world attributes. We use color space view, color attribute distribution view, and single color query components to assist researchers in conducting detailed color analysis and validation. Through case studies, researcher reviews, and user studies, we demonstrate that ColorNetVis can effectively help researchers discover knowledge of color relationships and potential color research directions.

A stable Zr(IV)-MOF for efficient removal of trace SO2 from flue gas in dry and humid conditions.

Obtaining suitable adsorbents for selective separation of SO2 from flue gas still remains an important issue. A stable Zr(IV)-MOF (Zr-PTBA) can be conveniently synthesized through the self-assembly of a tetracarboxylic acid ligand (H4L = 4,4',4'',4'''-(1,4-phenylenebis(azanetriyl))tetrabenzoic acid) and ZrCl4 in the presence of trace water. It exhibits a three-dimensional porous structure. The BET surface area is 1112.72 m2/g and the average pore size distribution focus on 5.9, 8.0 and 9.3 Å. Interestingly, Zr-PTBA shows selective adsorption of SO2. The maximum uptake reaches 223.21 cm3/g at ambient condition. While it exhibits lower adsorption uptake of CO2 (30.50 cm3/g) and hardly adsorbs O2 (2.57 cm3/g) and N2 (1.31 cm3/g). Higher IAST selectivities of SO2/CO2 (21.9), SO2/N2 (912.7), SO2/O2 (2269.9) and SO2/CH4 (85.0) have been obtained, which reveal its' excellent gas separation performance. Breakthrough experiment further confirms its application for flue gas deep desulfurization both in dry and humid conditions. Furthermore, the gas adsorption results and mechanisms have also been studied by theoretical calculations.

Enhancing Protein Solubility via Glycosylation: From Chemical Synthesis to Machine Learning Predictions.

Glycosylation is a valuable tool for modulating protein solubility; however, the lack of reliable research strategies has impeded efficient progress in understanding and applying this modification. This study aimed to bridge this gap by investigating the solubility of a model glycoprotein molecule, the carbohydrate-binding module (CBM), through a two-stage process. In the first stage, an approach involving chemical synthesis, comparative analysis, and molecular dynamics simulations of a library of glycoforms was employed to elucidate the effect of different glycosylation patterns on solubility and the key factors responsible for the effect. In the second stage, a predictive mathematical formula, innovatively harnessing machine learning algorithms, was derived to relate solubility to the identified key factors and accurately predict the solubility of the newly designed glycoforms. Demonstrating feasibility and effectiveness, this two-stage approach offers a valuable strategy for advancing glycosylation research, especially for the discovery of glycoforms with increased solubility.

Immediate mobilization after repair of Achilles tendon rupture may increase the incidence of re-rupture: a systematic review and meta-analysis of randomized controlled trials.

BACKGROUND: Achilles tendon rupture (ATR) is a significant injury that can require surgery and can have the risk of re-rupture even after successful treatment. Consequently, to minimize this risk, it is important to have a thorough understanding of the rehabilitation protocol and the impact of different rehabilitation approaches on preventing re-rupture. MATERIALS AND METHODS: Two independent team members searched several databases (PubMed, EMBASE, Web of Science, Cochrane Library, and CINAHL) to identify randomized controlled trials (RCTs) on operative treatment of ATR. We included articles that covered open or minimally invasive surgery for ATR, with a detailed rehabilitation protocol and reports of re-rupture. The study protocol has been registered at PROSPERO and has been reported in the line with PRISMA Guidelines, Supplemental Digital Content 1, http://links.lww.com/JS9/C85, Supplemental Digital Content 2, http://links.lww.com/JS9/C86 and assessed using AMSTAR Tool, Supplemental Digital Content 3, http://links.lww.com/JS9/C87. RESULTS: A total of 43 RCTs were eligible for the meta-analysis, encompassing a combined cohort of 2553 patients. Overall, the postoperative incidence of ATR patients developing re-rupture was 3.15% (95% CI: 2.26-4.17; I2=44.48%). Early immobilization group patients who had ATR had a 4.07% (95% CI: 1.76-7.27; I2=51.20%) postoperative incidence of re-rupture; Early immobilization + active range of motion (AROM) group had an incidence of 5.95% (95% CI: 2.91-9.99; I2=0.00%); Early immobilization + weight-bearing group had an incidence of 3.49% (95% CI: 1.96-5.43; I2=20.06%); Early weight-bearing + AROM group had an incidence of 3.61% (95% CI: 1.00-7.73; I2= 64.60%); Accelerated rehabilitation (immobilization) group had an incidence of 2.18% (95% CI: 1.11-3.59; I2=21.56%); Accelerated rehabilitation (non-immobilization) group had a rate of 1.36% (95% CI: 0.12-3.90; I2=0.00%). Additionally, patients in the immediate AROM group had a postoperative re-rupture incidence of 3.92% (95% CI: 1.76-6.89; I2=33.24%); Non-immediate AROM group had an incidence of 2.45% (95% CI: 1.25-4.03; I2=22.09%). CONCLUSIONS: This meta-analysis suggests the use of accelerated rehabilitation intervention in early postoperative rehabilitation of the Achilles tendon. However, for early ankle joint mobilization, it is recommended to apply after one to two weeks of immobilization.

Three-dimensional Mapping Analysis of Talus Fractures and Demonstration of Different Surgical Approaches for Talus Fractures.

OBJECTIVE: The talus is an important component in the ankle, and its treatment after injury is crucial. However, complications and adverse events due to incomplete traditional classifications may still occur, and these classifications fail to analyze the patterns and distribution of fractures from a three-dimensional perspective. Therefore, in this study, we aimed to analyze the location and distribution of fracture lines in different types of talus fractures using three-dimensional (3D) and heat mapping techniques. Additionally, we aimed to determine the surface area of the talus that can be utilized for different approaches of internal fixation, aiding in the planning of surgical procedures. METHODS: We retrospectively analyzed data from CT scans from 126 patients diagnosed with talus fractures at our two hospitals. We extracted the CT data of a healthy adult and created a standard talus model. We performed 3D reconstruction using patients' CT images and superimposed the fracture model onto the standard model for drawing fracture lines. Subsequently, we converted the fracture lines into a heat map for visualization. Additionally, we measured 20 specimens to determine the boundary for various ligaments attached to the talus. We determined the surface area of the talus available for different surgical approaches by integrating the boundary data with previously reported data on area of exposure. RESULTS: Without considering the displacement distance of the fracture, fracture types were classified as follows, by combining Hawkins and Sneppen classifications: talar neck, 41.3%; posterior talar tubercle, 22.2%; body for the talus and comminuted, 17.5%; lateral talar tubercle, 11.9%; and talar head, 7.1%. We established fracture line and heat maps using this classification. Additionally, we demonstrated the available area for anteromedial, anterolateral, posteromedial, posterolateral, and medial malleolus osteotomy and Chaput osteotomy approaches. CONCLUSION: Fracture line and heat map analyses can aid surgeons in planning a single or combined surgical approach for the reduction and internal fixation of talus fractures. Demonstrating the different surgical approaches can help surgeons choose the most effective technique for individual cases.

Chronic lateral ankle instability using anterior tibiofibular ligament distal fascicle transfer augmentation repair: an anatomical, biomechanical, and histological study.

Background: The transfer of the anterior tibiofibular ligament distal fascicle (ATiFL-DF) for the augmentation repair of the anterior talofibular ligament (ATFL) shows potential as a surgical technique. However, evidences on the benefits and disadvantages of this method in relation to ankle joint function are lacking. Purpose: This study aimed to provide comprehensive experimental data to validate the feasibility of ATiFL-DF transfer augmentation repair of the ATFL. Methods: This study included 50 embalmed ankle specimens to measure various morphological features, such as length, width, thickness, and angle, for evaluating similarities between the ATiFL-DF and ATFL. Furthermore, 24 fresh-frozen ankle specimens were examined for biomechanical testing of the ATiFL-DF transfer augmented repair of the ATFL. Finally, 12 pairs of ATiFL-DF and ATFL tissues from fresh-frozen ankle specimens were treated with gold chloride staining to analyze mechanoreceptor densities. Results: Anatomical studies found that the lengths and thicknesses of the ATFL and ATiFL-DF are similar. Biomechanical outcomes showed that performing ATiFL-DF transfer for ATFL repair can improve the stability of the talus and ankle joints. This is evident from the results of the anterior drawer, axial load, and ultimate failure load tests. However, performing ATiFL-DF transfer may compromise the stability of the distal tibiofibular joint, based on the Cotton and axial load tests at an external rotation of 5°. Analysis of the histological findings revealed that mechanoreceptor densities for four types of mechanoreceptors were comparable between the ATiFL-DF and ATFL groups. Conclusion: ATiFL-DF transfer is a viable method for augmenting ATFL repair. This technique helps to improve the stability of the talus and ankle joints while compensating for proprioception loss. Although ATiFL-DF transfer augmented repair of the ATFL may negatively affect the stability of the distal tibiofibular joint, this procedure can enhance the stability of the talus and ankle joints.

Anterior Talofibular Ligament Repair in Combination With Anterior Tibiofibular Ligament Distal Fascicle Transfer for The Treatment of Chronic Lateral Ankle Instability: A Finite Element Analysis.

In recent years, anterior tibiofibular ligament-distal fascicle transfers for anterior talofibular ligament augmentation repair have proposed. However, a comprehensive biomechanical study on the anterior tibiofibular ligament-distal fascicle transfer is still lacking. We are established four distinct groups, namely the normal, the anterior talofibular ligament rupture, the anterior talofibular ligament repair, and the anterior talofibular ligament repair + anterior tibiofibular ligament-distal fascicle transfer. We assessed the anterior drawer test and varus stress test of the ankle in each group. Moreover, we employed the model to simulate and compute the total displacement and von-Mises stress of the talus cartilage at varying gait phases, including foot strike, tibia vertical, and toe-off phases. The results of the anterior drawer test and varus stress test revealed that the anterior talofibular ligament repair + anterior tibiofibular ligament-distal fascicle transfer group exhibited greater closeness to the normal group. Regarding von-Mises stress in cartilage, the three gait instants had higher values in the anterior talofibular ligament repair + anterior tibiofibular ligament-distal fascicle transfer group than the other groups. Nevertheless, regarding total displacement, the toe-off phases exhibited higher values in the anterior talofibular ligament repair + anterior tibiofibular ligament-distal fascicle transfer group than the other groups. Using ATiFL-DF transfer to augment ATFL repair is a potential feasible procedure. However, this procedure could potentially compromise the anterior tibiofibular ligament's contribution to the dynamic stability of the ankle. Therefore, we recommend conducting further in-depth research to ensure the suitability and success of this technique in a clinical environment.

HLA Class II (DR, DQ, DP) Genes Were Separately Associated With the Progression From Seroconversion to Onset of Type 1 Diabetes Among Participants in Two Diabetes Prevention Trials (DPT-1 and TN07).

OBJECTIVE: To explore associations of HLA class II genes (HLAII) with the progression of islet autoimmunity from asymptomatic to symptomatic type 1 diabetes (T1D). RESEARCH DESIGN AND METHODS: Next-generation targeted sequencing was used to genotype eight HLAII genes (DQA1, DQB1, DRB1, DRB3, DRB4, DRB5, DPA1, DPB1) in 1,216 participants from the Diabetes Prevention Trial-1 and Randomized Diabetes Prevention Trial with Oral Insulin sponsored by TrialNet. By the linkage disequilibrium, DQA1 and DQB1 are haplotyped to form DQ haplotypes; DP and DR haplotypes are similarly constructed. Together with available clinical covariables, we applied the Cox regression model to assess HLAII immunogenic associations with the disease progression. RESULTS: First, the current investigation updated the previously reported genetic associations of DQA1*03:01-DQB1*03:02 (hazard ratio [HR] = 1.25, P = 3.50*10-3) and DQA1*03:03-DQB1*03:01 (HR = 0.56, P = 1.16*10-3), and also uncovered a risk association with DQA1*05:01-DQB1*02:01 (HR = 1.19, P = 0.041). Second, after adjusting for DQ, DPA1*02:01-DPB1*11:01 and DPA1*01:03-DPB1*03:01 were found to have opposite associations with progression (HR = 1.98 and 0.70, P = 0.021 and 6.16*10-3, respectively). Third, DRB1*03:01-DRB3*01:01 and DRB1*03:01-DRB3*02:02, sharing the DRB1*03:01, had opposite associations (HR = 0.73 and 1.44, P = 0.04 and 0.019, respectively), indicating a role of DRB3. Meanwhile, DRB1*12:01-DRB3*02:02 and DRB1*01:03 alone were found to associate with progression (HR = 2.6 and 2.32, P = 0.018 and 0.039, respectively). Fourth, through enumerating all heterodimers, it was found that both DQ and DP could exhibit associations with disease progression. CONCLUSIONS: These results suggest that HLAII polymorphisms influence progression from islet autoimmunity to T1D among at-risk subjects with islet autoantibodies.

Study of PARP inhibitors for breast cancer based on enhanced multiple kernel function SVR with PSO.

PARP1 is one of six enzymes required for the highly error-prone DNA repair pathway microhomology-mediated end joining (MMEJ) and needs to be inhibited when over-expressed. In order to study the PARP1 inhibitory effect of fused tetracyclic or pentacyclic dihydrodiazepinoindolone derivatives (FTPDDs) by quantitative structure-activity relationship technique, six models were established by four kinds of methods, heuristic method, gene expression programming, random forester, and support vector regression with single, double, and triple kernel function respectively. The single, double, and triple kernel functions were RBF kernel function, the integration of RBF and polynomial kernel functions, and the integration of RBF, polynomial, and linear kernel functions respectively. The problem of multi-parameter optimization introduced in the support vector regression model was solved by the particle swarm optimization algorithm. Among the models, the model established by support vector regression with triple kernel function, in which the optimal R 2 and RMSE of training set and test set were 0.9353, 0.9348 and 0.0157, 0.0288, and R2 cv of training set and test set were 0.9090 and 0.8971, shows the strongest prediction ability and robustness. The method of support vector regression with triple kernel function is a great promotion in the field of quantitative structure-activity relationship, which will contribute a lot to designing and screening new drug molecules. The information contained in the model can provide important factors that guide drug design. Based on these factors, six new FTPDDs have been designed. Using molecular docking experiments to determine the properties of new derivatives, the new drug was ultimately successfully designed.

Hepatotoxicity and lipid metabolism disorders of 8:2 polyfluoroalkyl phosphate diester in zebrafish: In vivo and in silico evidence.

8:2 polyfluoroalkyl phosphate diester (8:2 diPAP) has been shown to accumulate in the liver, but whether it induces hepatotoxicity and lipid metabolism disorders remains largely unknown. In this study, zebrafish embryos were exposed to 8:2 diPAP for 7 d. Hepatocellular hypertrophy and karyolysis were noted after exposure to 0.5 ng/L 8:2 diPAP, suggesting suppressed liver development. Compared to the water control, 8:2 diPAP led to significantly higher triglyceride and total cholesterol levels, but markedly lower levels of low-density lipoprotein, implying disturbed lipid homeostasis. The levels of two peroxisome proliferator activated receptor (PPAR) subtypes (pparα and pparγ) involved in hepatotoxicity and lipid metabolism were significantly upregulated by 8:2 diPAP, consistent with their overexpression as determined by immunohistochemistry. In silico results showed that 8:2 diPAP formed hydrogen bonds with PPARα and PPARγ. Among seven machine learning models, Adaptive Boosting performed the best in predicting the binding affinities of PPARα and PPARγ on the test set. The predicted binding affinity of 8:2 diPAP to PPARα (7.12) was higher than that to PPARγ (6.97) by Adaptive Boosting, which matched well with the experimental results. Our results revealed PPAR - mediated adverse effects of 8:2 diPAP on the liver and lipid metabolism of zebrafish larvae.

Chitosan-initiated gold nanoparticles with enhanced fluorescence for unique Fe3+/PPi sensing and photothermal therapy.

The design of surface ligands is crucial for ligand-protected gold nanoparticles (AuNPs). Herein, following the principle of green synthesis, environmentally friendly gold nanoparticles (AuNPs@His@CC, AuHC) were fabricated based on dual ligands of histidine and carboxylated chitosan. AuHC showed the advantages of low toxicity, good photoluminescent stability and ideal biocompatibility. Compared with single histidine-coated gold nanoclusters (AuNCs@His, AuH), AuHC presented enhanced fluorescence attributed to the addition of chitosan. The blue-emitting AuHC has a unique response to Fe3+ with detection limits as low as 9.51 nM. Interestingly, the quenched fluorescence of AuHC-Fe3+ system could be restored through the introduction of PPi with a detection limit of 10.6 µM. So an "on-off-on" fluorescence sensing platform was achieved. Apart from good optical properties and sensing, the designed AuHC demonstrated outstanding photothermal conversion efficiency (27.8 %), which made it ideal material for thermal ablation of tumor. To be specific, after laser irradiation (660 nm, 0.78 W cm-2, 10 min) of AuHC, the survival rate of HeLa cells as a tumor cell model decreased to 12.7 %, indicating that AuHC has a significant tumor inhibition effect in vitro. Besides, AuHC also could be a befitting candidate for overcoming drug-resistant tumor cells such as MCF-7/ADR cells. Notably, AuHC can markedly ablate solid tumors in 4T1 tumor-bearing mice after laser irradiation (660 nm, 0.78 W cm-2, 10 min). Hence this work provides insight into the design of multifunctional AuNPs platform for simultaneously integrating the ion sensing and photothermal therapy of cancer.

Suppressing Bulk Strain and Surface O2 Release in Li-Rich Cathodes by Just Tuning the Li Content.

Layered oxides represent a prominent class of cathodes employed in lithium-ion batteries. The structural degradation of layered cathodes causes capacity decay during cycling, which is generally induced by anisotropic lattice strain in the bulk of cathode particle and oxygen release at the surface. However, particularly in lithium-rich layered oxides (LLOs) that undergo intense oxygen redox reactions, the challenge of simultaneously addressing bulk and surface issues through a singular modification technique remains arduous. Here a thin (1-nm) and coherent spinel-like phase is constructed on the surface of LLOs particle to suppress bulk strain and surface O2 release by just adjusting the amount of lithium source during synthesis. The spinel-like phase hinders the surface O2 release by accommodating O2 inside the surface layer, while the trapped O2 in the bulk impedes strain evolution by ≈70% at high voltages compared with unmodified LLOs. Consequently, the enhanced structural stability leads to an improved capacity retention of 97.6% and a high Coulombic efficiency of ≈99.5% after 100 cycles at 0.1°C. These findings provide profound mechanistic insights into the functioning of surface structure and offer guidance for synthesizing high-capacity cathodes with superior cyclability.

The image quality, amyloid-ß detectability, and acquisition time of clinical florbetapir positron emission tomography in Alzheimer's disease and healthy adults.

Background: Florbetapir positron emission tomography (AV45 PET) is a widely employed modality for detecting cerebral amyloid-ß (Aß) deposition. However, in clinical settings, patients with cognitive impairment are frequently unable to sustain adequate stillness during the scanning procedure. Therefore, we aimed to investigate the effects of a short acquisition time on the image quality and Aß detectability of AV45 PET. Methods: In this cross-sectional study, 29 patients with Alzheimer's disease (AD) and 13 healthy participants underwent 15-minute AV45 PET/magnetic resonance imaging scanning. The PET data were subsequently reconstructed into 15-, 10-, 8-, 6-, 4-, 2-, and 1-minute duration groups (G15, G10, G8, G6, G4, G2, and G1). Subjective PET image quality was scored based on a 5-point Likert scale (poor-excellent: 1-5), and objective image quality was evaluated by the signal-to-noise ratio (SNR) of the 1 cm3 region of interest (ROI) inside the cerebellum. Aß detectability was assessed by the calculation of regional standardized uptake value ratio (SUVR) values in all groups. The Kruskal-Wallis rank sum test and paired t-test were performed to compare the subjective scores, SNR, and SUVR values. The visual inspection was also performed by 2 nuclear physicians to give a binary diagnosis to each case. Results: The subjective scores were decreased in the groups with shortened scanning time relative to the G15 group (4.67±0.48, all P<0.05). Notably, a good image quality score was also given to the G10 group (4.40±0.63), and sufficient image quality could be achieved with the G8 (3.86±0.68) and G6 (3.14±0.52) groups. The SNR values were decreased by 10.33%, 17.74%, and 23.26% in the G10, G8, and G6 group, respectively (all P<0.05). Compared with the G15 group (1.48±0.16), the composite SUVR values were increased in the G10 (1.50±0.16), G8 (1.50±0.17), and G6 groups (1.51±0.18, all P<0.05). By visual inspection, the diagnoses of each case in the G10, G8, and G6 group were identical with those in the G15 group. Conclusions: The acquisition time of AV45 PET is required to reach at least 6 minutes to achieve acceptable image quality and maintained Aß detectability.

Antagonistic RALF peptides control an intergeneric hybridization barrier on Brassicaceae stigmas.

Pollen-pistil interactions establish interspecific/intergeneric pre-zygotic hybridization barriers in plants. The rejection of undesired pollen at the stigma is crucial to avoid outcrossing but can be overcome with the support of mentor pollen. The mechanisms underlying this hybridization barrier are largely unknown. Here, in Arabidopsis, we demonstrate that receptor-like kinases FERONIA/CURVY1/ANJEA/HERCULES RECEPTOR KINASE 1 and cell wall proteins LRX3/4/5 interact on papilla cell surfaces with autocrine stigmatic RALF1/22/23/33 peptide ligands (sRALFs) to establish a lock that blocks the penetration of undesired pollen tubes. Compatible pollen-derived RALF10/11/12/13/25/26/30 peptides (pRALFs) act as a key, outcompeting sRALFs and enabling pollen tube penetration. By treating Arabidopsis stigmas with synthetic pRALFs, we unlock the barrier, facilitating pollen tube penetration from distantly related Brassicaceae species and resulting in interspecific/intergeneric hybrid embryo formation. Therefore, we uncover a "lock-and-key" system governing the hybridization breadth of interspecific/intergeneric crosses in Brassicaceae. Manipulating this system holds promise for facilitating broad hybridization in crops.

LH level on the antagonist administration day as a predictor of the reproductive outcomes in women with normal ovarian function.

Introduction: The addition of antagonists is mainly based on estrogen level and follicle size, while LH level has not received sufficient attention.In this study, LH Level on the antagonist administration day was used as the main research objective to explore its relationship with laboratory indicators and pregnancy outcomes. Methods and Analysis: We enrolled 854 patients with normal ovarian function undergoing in-vitro fertilization (IVF) or intracytoplasmic sperm injection (ICSI) between May 2021 to May 2022 at the Reproductive Center of Shandong University of Traditional Chinese Medicine.We used the quartile method to group LH levels on the antagonist administration day. There were four groups: Q1 (0.53IU/L≤LH ≤ 1.89IU/L); Q2 (1.89IU/L

The complete mitochondrial genome and phylogenetic analysis of Polythlipta liquidalis Leech, 1889 (Crambidae: spilomelinae).

The complete mitochondrial genome of Polythlipta liquidalis Leech, 1889 was sequenced and annotated in this study, which was the first reported complete mitogenome of the genus Polythlipta. The mitogenome of P. liquidalis is 15,305 bp in length and was predicted to encode 37 typical mitochondrial genes including 13 protein-coding genes (PCGs), 22 transfer RNA genes (tRNAs), 2 ribosomal RNA genes (rRNAs), and one major non-coding A-T rich region. The maximum likelihood phylogenetic analysis based on the 13 PCGs was constructed, including P. liquidalis and 15 related Spilomelinae species, using Ostrinia furnacalis as the outgroup. The result showed that P. liquidalis is grouped with Sinomphisa plagialis. These data will serve as a molecular resource for species identification of P. liquidalis and become a valuable resource for a range of genetic, functional, evolutionary and comparative genomic studies on members of Spilomelinae.

Efficient C2H6/C2H4 adsorption separation by a microporous heterometal-organic framework.

Purification of ethylene (C2H4) is an essential and energy-intensive process in the petrochemical industry. Adsorption separation using ethane (C2H6)-selective porous adsorbents is a highly efficient and straightforward method for obtaining polymer-grade C2H4 from a binary C2H6/C2H4 mixture. However, the design and construction of C2H6-selective adsorbents are very challenging tasks. Herein, we demonstrate a microporous heterometal-organic framework, CuIn(ina)4, can preferentially enrich C2H6 than C2H4. Experimental results revealed that CuIn(ina)4 exhibited remarkable separation performance for the C2H6/C2H4 mixture with a high C2H6 loading capacity (3.3 mmol/g), high IAST selectivity (2.3) and separation potential (1578 mmol/L for equimolar C2H6/C2H4 mixture) under ambient conditions. The effectiveness of CuIn(ina)4 for C2H6/C2H4 adsorption separation was confirmed by theoretical calculations and breakthrough experiments.

Vascular risk factors for idiopathic normal pressure hydrocephalus: a systematic review and meta-analysis.

Objective: Idiopathic normal-pressure hydrocephalus (iNPH) is a treatable cause of dementia; however, its etiology and pathogenesis remain poorly understood. The objective of this study was to investigate the prevalence and impact of vascular risk factors in patients with iNPH compared to a control cohort to better understand the potential mechanisms and preventive measures. Methods: We systematically searched PubMed, Web of Science, Embase, and the Cochrane Library (from inception to December 20, 2022) for studies reporting vascular risk factors for the development of iNPH. Pooled odds ratios (ORs) and 95% confidence intervals (CIs) were estimated using random-effects models. Results: After screening 1,462 articles, 11 case-control studies comprising 1,048 patients with iNPH and 79,668 cognitively unimpaired controls were included in the meta-analysis. Our data showed that hypertension (N = 991, OR = 2.30, 95% CI 1.64 to 3.23, I2= 64.0%), diabetes mellitus (DM) (N = 985, OR = 3.12, 95% CI 2.29 to 4.27, I2= 44.0%), coronary heart disease (CHD; N = 880, OR = 2.34, 95% CI 1.33 to 4.12, I2= 83.1%), and peripheral vascular disease (N = 172, OR = 2.77, 95% CI 1.50 to 5.13, I2= 0.0%) increased the risk for iNPH, while overweight was a possible factor (N = 225, OR = 2.01, 95% CI 1.34 to 3.04, I2= 0.0%) based on the sensitivity analysis. Smoking and alcohol consumption were not associated with iNPH. Conclusions: Our study suggested that hypertension, DM, CHD, peripheral vascular disease, and overweight were associated with iNPH. These factors might be involved in the pathophysiological mechanisms promoting iNPH. These findings require further investigation in future studies. Systematic review registration: https://www.crd.york.ac.uk/PROSPERO/, CRD42022383004.