The ATP-binding cassette transporter subfamily G member 4 mediates cuticular hydrocarbon transport to regulate drought tolerance in Acyrthosiphon pisum.

ABC transporters are a highly conserved membrane protein class that promote the transport of substances across membranes. Under drought conditions, insects primarily regulate the content of cuticular hydrocarbon (CHC) to retain water and prevent evaporative loss. Involvement of ABC transporter protein G (ABCG) subfamily genes in insect CHC transport has been relatively understudied. In this study, we demonstrated that ABCG4 gene in Acyrthosiphon pisum (ApABCG4) is involved in CHC transport and affects drought tolerance by regulating CHC accumulation. ApABCG4 is strongly expressed in the abdominal cuticle and embryonic stages of A. pisum. Effective silencing of ApABCG4 was achieved using RNAi, and the silencing duration was analyzed. ApABCG4 silencing resulted in a significant decrease in the total and component contents of the CHC and cuticular waxy coatings of A. pisum. Nevertheless, the internal hydrocarbon content remained unchanged. The lack of cuticular hydrocarbons significantly reduced the drought tolerance of A. pisum, shortening its survival time under drought stress. Drought stress caused significant upregulation of ApABCG4. Molecular docking showed that ApABCG4 has a high binding affinity for nine n-alkanes of CHC through electrostatic interactions. These results indicate that ApABCG4 is a novel RNAi target with key applications in aphid biological control.

Temperature-driven shifts in bacterioplankton biodiversity: Implications for cold-preferred species in warming Tibetan proglacial lakes.

Recent climate warming and associated glacier retreat have dramatically changed the environmental conditions and microbial inhabitants of proglacial lakes. However, our understanding of the effects of climate warming and glacial influence on microbial biodiversity in these lakes remain relatively limited. Here, we studied bacterioplankton communities in 22 proglacial lakes on the Tibetan Plateau, spanning a range of nearly 7 °C in mean annual temperature (MAT), and examined the effects of climate and glaciers on their biodiversity by a space-to-time substitution. MAT emerged as the primary environmental driver of bacterioplankton biodiversity compared to glacial influence, increasing species richness and decreasing ß-diversity. We identified 576 low-MAT (cold-preferred) species and 2,088 high-MAT (warm-preferred) species, and found that low-MAT species are less environmentally adapted, with their numbers declining as temperature increased. These results advance our understanding of temperature-driven bacterioplankton dynamics by disentangling the contrasting responses and adaptations of cold-preferred and warm-preferred species. Our findings highlight the vulnerability of cold-specialist taxa and the potential biodiversity losses associated with climate warming in the rapidly changing proglacial lakes.

Neural substrates for regulating self-grooming behavior in rodents. / 啮齿动物自我梳理行为调控的神经基质.

Grooming, as an evolutionarily conserved repetitive behavior, is common in various animals, including humans, and serves essential functions including, but not limited to, hygiene maintenance, thermoregulation, de-arousal, stress reduction, and social behaviors. In rodents, grooming involves a patterned and sequenced structure, known as the syntactic chain with four phases that comprise repeated stereotyped movements happening in a cephalocaudal progression style, beginning from the nose to the face, to the head, and finally ending with body licking. The context-dependent occurrence of grooming behavior indicates its adaptive significance. This review briefly summarizes the neural substrates responsible for rodent grooming behavior and explores its relevance in rodent models of neuropsychiatric disorders and neurodegenerative diseases with aberrant grooming phenotypes. We further emphasize the utility of rodent grooming as a reliable measure of repetitive behavior in neuropsychiatric models, holding promise for translational psychiatry. Herein, we mainly focus on rodent self-grooming. Allogrooming (grooming being applied on one animal by its conspecifics via licking or carefully nibbling) and heterogrooming (a form of grooming behavior directing towards another animal, which occurs in other contexts, such as maternal, sexual, aggressive, or social behaviors) are not covered due to space constraints.

Study of Coating Growth Direction of 6061 Aluminum Alloy in Soft Spark Discharge of Plasma Electrolytic Oxidation.

Conventional plasma electrolytic oxidation treatments produce oxide coatings with micron-scale discharge pores, resulting in insulation and wear and corrosion resistance far below that expected of highly dense Al2O3 coatings. The introduction of cathodic polarization during the plasma electrolytic oxidation process, especially when the applied cathode-to-anode current ratio (Rpn) is greater than 1, triggers a unique plasma discharge phenomenon known as "soft sparking". The soft spark discharge mode significantly improves the densification of the anode ceramic layer and facilitates the formation of the high-temperature α-Al2O3 phase within the coating. Although the soft spark discharge phenomenon has been known for a long time, the growth behavior of the coating under its discharge mode still needs to be studied and improved. In this paper, the growth behavior of the coating before and after soft spark discharge is investigated with the help of the micro-morphology, phase composition and element distribution of a homemade fixture. The results show that the ceramic layer grows mainly along the oxide-electrolyte direction before the soft spark discharge transformation; after the soft spark discharge, the ceramic layer grows along the oxide-substrate direction. It was also unexpectedly found that, under soft spark discharge, the silicon element only exists on the outside of the coating, which is caused by the large size and slow migration of SiO32-, which can only enter the ceramic layer and participate in the reaction through the discharge channel generated by the strong discharge. In addition, it was also found that the relative phase content of α-Al2O3 in the coating increased from 0.487 to 0.634 after 10 min of rotary spark discharge, which is an increase of 30.2% compared with that before the soft spark discharge transition. On the other hand, the relative phase content of α-Al2O3 in the coating decreased from 0.487 to 0.313 after 20 min of transfer spark discharge, which was a 55.6% decrease compared to that before the soft spark discharge transformation.

Influence of Additives on the Macroscopic Color and Corrosion Resistance of 6061 Aluminum Alloy Micro-Arc Oxidation Coatings.

In this study, we successfully employed the plasma electrolytic oxidation (PEO) technique to create a uniform white ceramic layer on the surface of the 6061 aluminum alloy using K2ZrF6 and Na2WO4 as colorants. A scanning electron microscope (SEM) equipped with an energy-dispersive X-ray spectrometer (EDS) and X-ray diffraction (XRD) were used to characterize the coatings, and we used an electrochemical workstation to test their corrosion protection properties. The corrosion resistance of the coatings was analyzed using potentiodynamic polarization curves. The results showed that K2ZrF6 addition whitened the coating with ZrO2 as the main phase composition, inhibiting Al substrate depletion and enhancing coating corrosion resistance. A small amount of Na2WO4 decreased the coating's L* value, successfully constructing ceramic coatings with L* (coating brightness) values ranging from 70 to 86, offering broad application prospects for decorative coatings.

Effect of Negative Pulse on the Stability of Black Electrolytes for Magnesium Alloy Microarc Oxidation.

The correlation between negative pulse and the black electrolyte properties of magnesium alloy micro-arc oxidation and the treated area was investigated by introducing a negative pulse electric field. The physical phase composition, microstructure, elemental distribution, and content of the coating were analyzed using X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS). The results showed that the introduction of negative pulses favored the generation of MgO and MgSiO3 contents in the coatings, and an increase in the MgO phase was found in the coatings formed in the failed electrolytes; the microporous size and microcracks of the coatings were gradually and significantly reduced; the average consumption of Cu ions was 0.0453 g/L·dm2, which is only 26% of that in the unipolar condition; the introduction of the negative pulses significantly improved the "anomalous consumption" of Cu ions. The introduction of negative pulse can significantly improve the "abnormal consumption" of copper ions, which is attributed to the change in the electric field by negative pulse, which makes the cathode-enriched Cu ions migrate to the anode and reduces the reduction and precipitation of Cu ions at the cathode.

A Conductive Binder Based on Mesoscopic Interpenetration with Polysulfides Capturing Skeleton and Redox Intermediates Network for Lithium Sulfur Batteries.

The practical application of lithium-sulfur batteries with high theoretical energy density and readily available cathode active materials is hampered by problems such as sulfur insulation, dramatic volume changes, and polysulfide shuttling. The targeted development of novel binders is the most industrialized solution to the problem of sulfur cathodes. Herein, an aqueous conductive emulsion binder with the sulfonate-containing hard elastic copolymer core and the conjugate polymer shell, which is capable of forming a bicontinuous mesoscopic interpenetrating polymer network, is synthesized and investigated. Not only can the elastic skeleton formed by the copolymer bind the active substance under drastic volume changes, but also the rich ester and cyanide groups in it can effectively capture lithium polysulfide. Meanwhile, the conducting skeleton consisting of poly(3,4-ethylenedioxythiophene) both provides the additional charge conduction pathways and acts as the redox intermediates, significantly accelerating the kinetic process of lithium polysulfide conversion. Based on the synergistic effect of the above mechanisms, the use of the prepared binder on the sulfur carbon cathode significantly improves the rate performance and cycle stability of lithium sulfur batteries.

Rapid quantification of single component oil in perilla oil blends by ultraviolet-visible spectroscopy combined with chemometrics.

As a unconventional oil, perilla oil is much more expensive than conventional oils since it has the highest content of α-linolenic acid among vegetable oils. Thus the adulteration of perilla oil is serious, which needs to be solved. In this study, the single component oil in perilla oil blends were first quantitatively analyzed by ultraviolet-visible (UV-vis) spectroscopy combined with chemometric methods. Soybean oil and palm oil were added into perilla oil to form binary and ternary perilla oil blends. Partial least squares (PLS), back propagation-artificial neural network (BP-ANN), support vector regression (SVR) and extreme learning machine (ELM) were compared and the best model was selected for calibration. In order to improve the prediction performance of the calibration model, ten preprocessing methods and five variable selection methods were investigated. Results show that PLS was the best calibration method for binary and ternary perilla oil blends. For binary perilla oil blends, the correlation coefficients of prediction (Rp) obtained by PLS were both above 0.99, which does not need preprocessing and variable selection. For ternary perilla oil blends, after the best continuous wavelet transform (CWT) preprocessing and discretized whale optimization algorithm (WOA) variable selection, the Rp values obtained by the best model CWT-WOA-PLS were all above 0.97. This research provides a common framework for calibration of perilla oil blends, which maybe a promising method for quality control of perilla oil in industry.

Advancements in Thermal Insulation through Ceramic Micro-Nanofiber Materials.

Ceramic fibers have the advantages of high temperature resistance, light weight, favorable chemical stability and superior mechanical vibration resistance, which make them widely used in aerospace, energy, metallurgy, construction, personal protection and other thermal protection fields. Further refinement of the diameter of conventional ceramic fibers to microns or nanometers could further improve their thermal insulation performance and realize the transition from brittleness to flexibility. Processing traditional two-dimensional (2D) ceramic fiber membranes into three-dimensional (3D) ceramic fiber aerogels could further increase porosity, reduce bulk density, and reduce solid heat conduction, thereby improving thermal insulation performance and expanding application areas. Here, a comprehensive review of the newly emerging 2D ceramic micro-nanofiber membranes and 3D ceramic micro-nanofiber aerogels is demonstrated, starting from the presentation of the thermal insulation mechanism of ceramic fibers, followed by the summary of 2D ceramic micro-nanofiber membranes according to different types, and then the generalization of the construction strategies for 3D ceramic micro-nanofiber aerogels. Finally, the current challenges, possible solutions, and future prospects of ceramic micro-nanofiber materials are comprehensively discussed. We anticipate that this review could provide some valuable insights for the future development of ceramic micro-nanofiber materials for high temperature thermal insulation.

Ecological Risk Assessment of Three Pesticide Additives in Soil and Application to the Remediation of Contaminated Soil.

Pesticide additives (PAs) are auxiliary ingredients added to the pesticide manufacturing and use processes, constituting 1% to 99% of the pesticide and often composed of benzene and chlorinated hydrocarbons. We selected three typical PAs, toluene, chloroform, and trichloroethylene, to evaluate their retention function toxicity and ecological risk in soil. Soil immobilization techniques and aquatic model organisms were used to demonstrate the effectiveness of the immobilized soil method to determine the ecological risk of chemicals. The 48-h median lethal concentrations of toluene, chloroform, and trichloroethylene alone in spiked soil on Daphnia magna were 10.5, 2.3, and 1.1 mg/L (medium, high, and high toxicity, respectively). The toxicity of the three-PA mixtures showed an antagonistic effect. The risk levels of toluene, chloroform, and trichloroethylene in the soil were evaluated as moderate to high, low to high, and high risk, respectively. The toxicity of two pesticide-contaminated sites in the Yangtze River Delta before and after remediation was successfully evaluated by immobilized soil technology. The toxicity of two soil sampling points was reduced from medium toxic to low toxic and no toxic, respectively, after remediation. The results of our study give a rationale for and prove the validity of the aquatic model organisms and soil immobilization techniques in assessing the soil retention functions toxicity of PAs. Environ Toxicol Chem 2024;43:1677-1689. © 2024 SETAC.

A combined pre- and intra-operative nomogram in evaluation of degrees of liver cirrhosis predicts post-hepatectomy liver failure: a multicenter prospective study.

Background: Adequate evaluation of degrees of liver cirrhosis is essential in surgical treatment of hepatocellular carcinoma (HCC) patients. The impact of the degrees of cirrhosis on prediction of post-hepatectomy liver failure (PHLF) remains poorly defined. This study aimed to construct and validate a combined pre- and intra-operative nomogram based on the degrees of cirrhosis in predicting PHLF in HCC patients using prospective multi-center's data. Methods: Consecutive HCC patients who underwent hepatectomy between May 18, 2019 and Dec 19, 2020 were enrolled at five tertiary hospitals. Preoperative cirrhotic severity scoring (CSS) and intra-operative direct liver stiffness measurement (DSM) were performed to correlate with the Laennec histopathological grading system. The performances of the pre-operative nomogram and combined pre- and intra-operative nomogram in predicting PHLF were compared with conventional predictive models of PHLF. Results: For 327 patients in this study, histopathological studies showed the rates of HCC patients with no, mild, moderate, and severe cirrhosis were 41.9%, 29.1%, 22.9%, and 6.1%, respectively. Either CSS or DSM was closely correlated with histopathological stages of cirrhosis. Thirty-three (10.1%) patients developed PHLF. The 30- and 90-day mortality rates were 0.9%. Multivariate regression analysis showed four pre-operative variables [HBV-DNA level, ICG-R15, prothrombin time (PT), and CSS], and one intra-operative variable (DSM) to be independent risk factors of PHLF. The pre-operative nomogram was constructed based on these four pre-operative variables together with total bilirubin. The combined pre- and intra-operative nomogram was constructed by adding the intra-operative DSM. The pre-operative nomogram was better than the conventional models in predicting PHLF. The prediction was further improved with the combined pre- and intra-operative nomogram. Conclusions: The combined pre- and intra-operative nomogram further improved prediction of PHLF when compared with the pre-operative nomogram. Trial Registration: Clinicaltrials.gov Identifier: NCT04076631.

Reproductive toxicity of cadmium stress in male animals.

Cadmium (Cd) is a common heavy metal pollutant in the environment, and the widespread use of products containing Cd compounds in industry has led to excessive levels in the environment, which enter the animal body through the food chain, thus seriously affecting the reproductive development of animals. Related studies have reported that Cd severely affects spermatogonia development and spermatogenesis in animals. In contrast, the reproductive toxicity of Cd in males and its mechanism of action have not been clarified. Therefore, this paper reviewed the toxic effects of Cd on germ cells, spermatogonia somatic cells and hypothalamic-pituitary-gonadal axis (HPG axis) of male animals and its toxic action mechanisms of oxidative stress, apoptosis and autophagy from the perspectives of cytology, genetics and neuroendocrinology. The effects of Cd stress on epigenetic modification of reproductive development in male animals were also analyzed. We hope to provide a reference for the in-depth study of the toxicity of Cd on male animal reproduction.

Anatomical sectionectomy based on Takasaki's segmentation for solitary intrahepatic cholangiocarcinoma: a propensity-matched analysis.

BACKGROUND: Anatomical sectionectomy based on Takasaki's segmentation has shown advantages in hepatocellular carcinoma. However, whether this approach improves the survival of intrahepatic cholangiocarcinoma (ICC) remains unknown. METHODS: A series of 248 consecutive patients with solitary ICCs who underwent hepatectomy were studied retrospectively. The patients were classified into the groups of anatomical sectionectomy based on Takasaki's segmentation (TS group) and non-Takasaki's hepatectomy (NTH group). The bias between the two groups was minimized using propensity score matching (PSM). Recurrence-free survival (RFS) and overall survival (OS) were evaluated with Kaplan-Meier analysis. The Cox proportional hazards model was performed to determine the adverse risk factors associated with survival. RESULTS: After PSM, 67 pairs of patients were compared. Both the RFS and OS rates in the TS group were significantly better than those in the NTH group (23.2 % vs. 16.5 %, and 40.4 % vs. 27.3 %, P = 0.035 and 0.032, respectively). Multivariate analysis showed that NTH was independently associated with worse RFS and OS than TS. The stratified analysis demonstrated that the RFS and OS rates in the TS group with tumor stage I and tumor size ≥3 cm were significantly better than those in the NTH group, while the survival rates for ICC with stage I and tumor size <3 cm or stage II-III showed no significant difference. CONCLUSION: TS was associated with improved RFS and OS in patients with solitary ICC even after PSM. TS may be preferred particularly in patients with tumor stage I and tumor size ≥3 cm.

Adsorption Characteristics of Ball Milling-Modified Chinese Medicine Residue Biochar Toward Quercetin.

Using traditional Chinese medicine residues as raw materials, different biochars (BC) were prepared through oxygen-limited pyrolysis at 300 °C, 500 °C, and 700 °C, and BC was ball-milled to produce ball-milled biochar (BMC). Using these adsorbents to adsorb the allelopathic autotoxic substance quercetin. The physical and chemical properties of various biochars derived from traditional Chinese medicine residues were characterized using the Brunauer-Emmett-Teller-N2 surface areas (BET), scanning electron microscopy (SEM), Fourier transform IR spectroscopy (FTIR), X-ray diffraction (XRD), and Raman spectroscopy (Raman). The study investigated the effects of the initial pH value, different humic acid concentrations, and multiple adsorption-desorption experiments on the removal of quercetin from the solution. The article discusses the adsorption mechanism of quercetin in solution by biochar from a traditional Chinese medicine residue, based on the results of adsorption kinetics and adsorption isotherm fitting. The findings indicate that increasing the pyrolysis temperature reduces the oxygen-containing functional groups of BC, enhances the aromaticity, and stabilizes the carbon structure. The pore structure of BMC becomes more complex after ball milling, which increases the number of oxygen-containing functional groups on the surface. Among the samples tested, BMC700 exhibits the best adsorption performance, with an adsorption capacity of 293.3 mg·g-1 at 318 K. The adsorption process of quercetin by BMC700 follows the pseudo-second-order kinetic model and the Freundlich adsorption isotherm model. The process is primarily a form of multimolecular layer adsorption. Its mechanism involves the pore-filling effect, hydrogen-bonding interaction, electrostatic interaction, and π-π coexistence, as well as the yoke effect. Additionally, they are highly recyclable and show promise in addressing continuous cropping issues.

Characterization of SgALMT genes reveals the function of SgALMT2 in conferring aluminum tolerance in Stylosanthes guianensis through the mediation of malate exudation.

Aluminum (Al) toxicity is the major constraint on plant growth and productivity in acidic soils. An adaptive mechanism to enhance Al tolerance in plants is mediated malate exudation from roots through the involvement of ALMT (Al-activated malate transporter) channels. The underlying Al tolerance mechanisms of stylo (Stylosanthes guianensis), an important tropical legume that exhibits superior Al tolerance, remain largely unknown, and knowledge of the potential contribution of ALMT genes to Al detoxification in stylo is limited. In this study, stylo root growth was inhibited by Al toxicity, accompanied by increases in malate and citrate exudation from roots. A total of 11 ALMT genes were subsequently identified in the stylo genome and named SgALMT1 to SgALMT11. Diverse responses to metal stresses were observed for these SgALMT genes in stylo roots. Among them, the expressions of 6 out of the 11 SgALMTs were upregulated by Al toxicity. SgALMT2, a root-specific and Al-activated gene, was selected for functional characterization. Subcellular localization analysis revealed that the SgALMT2 protein is localized to the plasma membrane. The function of SgALMT2 in mediating malate release was confirmed by analysis of the malate exudation rate from transgenic composite stylo plants overexpressing SgALMT2. Furthermore, overexpression of SgALMT2 led to increased root growth in transgenic stylo plants treated with Al through decreased Al accumulation in roots. Taken together, the results of this study suggest that malate secretion mediated by SgALMT2 contributes to the ability of stylo to cope with Al toxicity.

Liver resection versus microwave ablation for solitary and small (≤ 3 cm) HCC with early recurrence in different stages of liver cirrhosis: A propensity score matching study.

BACKGROUND: This study aimed to compare the effectiveness of liver resection (LR) and microwave ablation (MWA) in hepatocellular carcinoma (HCC) patients with early recurrence and varying stages of cirrhosis. METHOD: This study analyzed patients with HCC who underwent hepatectomy and experienced early tumor recurrence (≤3 cm) between December 2002 and December 2020 at the Tongji Hospital. Treatment effectiveness was assessed using a propensity score matching (PSM) analysis. RESULTS: This study included 295 patients (106, LR; 189, MWA), 86 patients in each of the 2 groups were chosen for further comparison, after PSM. After PSM, both LR and MWA demonstrated similar recurrence-free survival (RFS) and overall survival (OS) rates (p = 0.060 and p = 0.118, respectively). However, the LR group had more treatment-related complications. In patients with moderate or severe cirrhosis, no significant differences in RFS or OS rates were found between the LR and MWA groups (p = 0.779 and p = 0.772, respectively). In patients without cirrhosis or with mild cirrhosis, LR showed better RFS and OS rates than MWA (p = 0.024 and p = 0.047, respectively). Multivariate analysis after PSM identified moderate or severe cirrhosis and recurrence intervals ≤12 months as independent predictors of poor RFS and OS in patients with early recurrence of HCC. CONCLUSION: LR is more effective than MWA for early recurrence of HCC in patients without cirrhosis or with mild cirrhosis, showing improved RFS and OS rates. In patients with moderate or severe cirrhosis, the OS and RFS were statistically equal between the two therapies. However, MWA may be preferred owing to its low complication rate.

The mediating role of children's intergenerational support in association between grandparenting and cognitive function among middle-aged and older Chinese: findings from the CHARLS cohort study.

OBJECTIVES: With the world's population increasing in age, there has been a significant rise in the prevalence of cognitive impairment and dementia among individuals. This study aims to investigate the association between grandparenting and cognitive function among middle-aged and older Chinese using data from 2011 to 2018 China Health and Retirement Longitudinal Study (CHARLS). Additionally, the study seeks to explore the potential mediating effect of intergenerational support from children on this relationship, using data from the CHARLS 2011 database. METHODS: 5254 participants were recruited at the baseline survey in CHARLS 2011. Subsequently, a follow-up survey was conducted over 8 years, from CHARLS 2011 to 2018, with 1472 individuals completing the follow-up survey. The CHARLS included surveys on grandparenting and cognitive assessments. Grandparenting was categorized as yes and no. The assessment of cognitive function involved the evaluation of episodic memory and mental intactness. The present study used cross-sectional and longitudinal analyses to examine the relationship between grandparenting and cognitive function. The bootstrap method assessed the mediating effect of children's intergenerational support. RESULTS: The results of both cross-sectional and longitudinal studies indicated a positive association between grandparenting and cognitive function in middle-aged and older Chinese (B = 0.138, p < 0.05; B = 0.218, p < 0.05). Children's emotional and economic support played intermediary roles between grandparenting and cognitive function. CONCLUSION: The results emphasized the significance of policymakers considering the consequences of intergenerational care and family support when formulating and executing social service policies targeted at the middle-aged and older population in China.

Improving the ionic conductivity of polymer electrolytes induced by ceramic nanowire fillers with abundant lithium vacancies.

The addition of ceramic fillers is regarded as an effective strategy for enhancing the ionic conductivity of polymer electrolytes. However, particulate fillers typically fail to provide continuous conductive pathways and effective reinforcement. Herein, we report a ceramic nanowire filler with long-range interfacial conductivity and abundant lithium vacancies for a poly(ethylene oxide) (PEO)-based all-solid-state polymer electrolyte. LLZO nanowires (LLZO NWs) with a high aspect ratio are synthesized by combining sol-gel electrospinning and the multi-step process involving pre-oxidation, pre-sintering, and secondary sintering, resulting in a high tensile strength of the composite electrolyte (6.87 MPa). Notably, tantalum-aluminum co-substituted LLZO NWs (TALLZO NWs) release abundant lithium vacancies, further enhancing the Lewis acid-base properties, leading to a rapid ion migration speed (Li+ transfer number = 0.79) and significantly high ionic conductivity (3.80 × 10-4 S cm-1). Due to the synergistic effect of nanostructure modification and heteroatom co-doping, the assembled all-solid-state lithium-sulfur battery exhibits a high initial discharge capacity (776 mA h g-1 at 25 °C), remarkable rate capability, and excellent cycling performance (81% capacity retention after 200 cycles at 0.1C).