RESUMEN
O3-type layered transition metal cathodes are promising energy storage materials due to their sufficient sodium reservoir. However, sluggish sodium ions kinetics and large voltage hysteresis, which are generally associated with Na+ diffusion properties and electrochemical phase transition reversibility, drastically minimize energy density, reduce energy efficiency, and hinder further commercialization of sodium-ion batteries (SIBs). Here, this work proposes a high-entropy tailoring strategy through manipulating the electronic local environment within transition metal slabs to circumvent these issues. Experimental analysis combined with theoretical calculations verify that high-entropy metal ion mixing contributes to the improved reversibility of redox reaction and O3-P3-O3 phase transition behaviors as well as the enhanced Na+ diffusivity. Consequently, the designed O3-Na0.9Ni0.2Fe0.2Co0.2Mn0.2Ti0.15Cu0.05O2 material with high-entropy characteristic could display a negligible voltage hysteresis (<0.09 V), impressive rate capability (98.6 mAh g-1 at 10 C) and long-term cycling stability (79.4% capacity retention over 2000 cycles at 5 C). This work provides insightful guidance in mitigating the voltage hysteresis and facilitating Na+ diffusion of layered oxide cathode materials to realize high-rate and high-energy SIBs.
RESUMEN
O3-type layered oxides with high initial sodium content are promising cathode candidates for Na-ion batteries. However, affected by the undesired transition metal slab sliding and reaction with H2O/CO2, their further application is typically hindered by unsatisfactory cycling stability upon charging to high voltage and poor storage stability under humid air. Herein, we demonstrate a Fe/Ti cosubstitution strategy to simultaneously enhance the electrochemical performance and storage stability of pristine O3-NaNi0.5Mn0.5O2 cathode material, via employing high redox potential and inactive stabilized dopants. The resultant Fe/Ti cosubstituted Na0.95Ni0.40Fe0.15Mn0.3Ti0.15O2 undergoes highly reversible O3-P3-OP2 phase transitions with a small cell volume change of 2.8%, instead of complex O3-O'3-P3-P'3-P3'-O1 phase transitions in NaNi0.5Mn0.5O2. Consequently, the cathode displays a high specific capacity of 161.6 mAh g-1 with an average working voltage of 3.28 V and 81.8% capacity retention after 200 cycles at 5C. Furthermore, the cathode material remains very stable after exposure to air for 7 days and even after soaking in water for 1 h, owing to the prohibition of sodium losing by elevating redox potential and contracting sodium layer spacing. This work proposes an effective method to enhance the electrochemical performance and storage stability of O3-type layered oxide cathodes and promises advancing Na-ion batteries toward large-scale industrialization.