A dual composite resin injection molding technique with 3D-printed flexible indices for biomimetic replacement of a missing mandibular lateral incisor.

PATIENTS: This case report presents a minimally invasive approach to replace a missing mandibular lateral incisor using a dual-injection molding technique with flowable composite resins. Integrated with a comprehensive digital workflow, this method achieves a structurally and esthetically biomimetic, bi-layered prosthetic solution. A 34-year-old woman with congenital absence of a mandibular lateral incisor was successfully rehabilitated using a direct composite resin-bonded fixed partial denture (RBFPD). DISCUSSION: Two specialized three-dimensional (3D)-printed flexible indices stabilized by a custom-designed 3D-printed rigid holder were employed to ensure the meticulous injection molding of flowable composite resins formulated to emulate the inherent chromatic gradations between dentin and enamel. The inherent flexibility of the indices, combined with the holder, facilitated accurate and seamless adaptation to the complex morphological features of the dental arch, thereby mitigating the challenges commonly associated with rigid 3D-printed resin indices. CONCLUSIONS: The bilayered direct composite RBFPD using 3D printed flexible indices prepared with a full digital workflow has several advantages over other dental prosthetic solutions, including noninvasiveness, cost-effectiveness, biomimetic esthetics, repairability, and shortened treatment times. Although the initial results are promising, further longitudinal studies with larger patient cohorts are required to confirm the long-term efficacy of this approach.

Digitally Guided Direct Composite Injection Technique with a Bi-layer Clear Mini-Index for the Management of Extensive Occlusal Caries in a Pediatric Patient: A Case Report.

PURPOSE: This case report presents a direct composite inverse injection technique using a bi-layer clear mini-index fabricated with a digital workflow to restore extensive posterior occlusal cavities in a 13-year-old patient. MATERIALS AND METHODS: After a root canal treatment in the right mandibular first molar and step-wise excavation of deep caries in the left mandibular first molar, the extensive occlusal restorations were digitally designed using CAD software, upon which digital wax-ups were 3D-printed. Bi-layer clear mini-indices consisting of a hard outer plastic layer and an elastic inner silicone layer were prepared from the 3D-printed cast. The bonding surfaces were deproteinized using a 6% sodium hypochlorite solution, and an antioxidant (Clearfil DC Activator; Kuraray Noritake) was utilized to improve the dentin bonding durability of a 2-step self-etch adhesive (Clearfil SE Bond 2; Kuraray Noritake). Subsequently, a highly filled universal-shade flowable resin composite (RC) was incrementally placed into the cavities. To create the final occlusal morphology, the same RC was inversely injected through the opening of the bi-layer indices. RESULTS: The workflow was feasible, and the occlusal cavities were efficiently restored using the injection technique. Occlusal carving and adjustments of the morphology were not necessary, leading to less chair time. At the 1-year follow-up, the clinical outcome was excellent. CONCLUSION: The injection technique with a bi-layer clear mini-index accurately translated the digital wax-ups into large, final restorations. Precise morphology and shortened chair time enhanced patient satisfaction, but at the expense of multiple visits.

Nonsurgical orthodontic treatment for a patient with Sotos syndrome.

Sotos syndrome is a genetic disorder characterized by overgrowth in childhood, specific facial manifestations, advanced bone age, and mental retardation. The purpose of this article is to describe the nonsurgical orthodontic treatment of a 10-year-old boy with a skeletal mandibular protrusion, unilateral posterior crossbite, and Sotos syndrome. After maxillary lateral expansion, the skeletal Class III relationship with an anterior crossbite improved because of mandibular clockwise rotation, whereas the facemask had a marginal effect. After growth at 16 years, he had a skeletal Class I relationship, and thus, conventional orthodontic treatment with preadjusted edgewise appliances was initiated. After 41 months of multibracket treatment, acceptable occlusion with a functional Class I relationship was obtained. One year postretention, few changes in occlusion and facial features were observed. Our results demonstrate that considering the maxillofacial vertical growth during the peripubertal period associated with Sotos syndrome, more attention should be paid to the early orthopedic treatment with the facemask and/or chincap.

Quantitative evaluation of training method in placing miniscrews in orthodontic graduate program.

BACKGROUND: The purpose of this study was to assess the effectiveness of training residents in an orthodontic program in the placement of miniscrews by using cone beam computed tomography (CBCT) images. A total of 90 miniscrews were placed in 15 pig mandibles over a 3-year period by 15 first-year orthodontic residents. Miniscrews were divided into three groups (Control group: no radiographs; 2D group: placement with 2D radiographs; CBCT group: placement with CBCT). Proximity of the miniscrew to the neighboring root was measured. The miniscrew success rate was examined in the graduate clinic from 2015 to 2021. RESULTS: The percentage of root contact for each group was: 36.7% (11/30), 20.0% (6/30), 0% (0/30), for the Control, 2D, and CBCT groups, respectively. The CBCT group was significantly different from the Control and 2D groups (p < 0.05). For root proximity, the miniscrews were significantly closer to the roots in the Control (p < 0.001) and 2D (p < 0.001) groups compared with the CBCT group. No significant difference was observed between the Control and 2D groups (p = 0.80). There was no significant difference among the years in the miniscrew success rate. CONCLUSIONS: Training the residents in an orthodontic graduate program using CBCT may be helpful to avoid root damage and to decrease the miniscrew failure rate.

Site-specific characteristics of bone and progenitor cells in control and ovariectomized rats.

One-third of postmenopausal women experience at least one osteoporotic bone fracture in their lifetime that occurs spontaneously or from low-impact events. However, osteoporosis-associated jaw bone fractures are extremely rare. It was also observed that jaw bone marrow stem cells (BMSCs) have a higher capacity to form mineralized tissues than limb BMSCs. At present, the underlying causes and mechanisms of variations between jaw bone and limb bone during postmenopause are largely unknown. Thus, the objective of the current study was to examine the site-specific effects of estrogen deficiency using comprehensive analysis of bone quantity and quality, and its association with characterization of cellular components of bone. Nine rats (female, 6 months old) for each bilateral sham and ovariectomy (OVX) surgery were obtained and maintained for 2 months after surgery. A hemi-mandible and a femur from each rat were characterized for parameters of volume, mineral density, cortical and trabecular morphology, and static and dynamic mechanical analysis. Another set of 5 rats (female, 9 months old) was obtained for assays of BMSCs. Following cytometry to identify BMSCs, bioassays for proliferation, and osteogenic, adipogenic, chondrogenic differentiation, and cell mitochondrial stress tests were performed. In addition, mRNA expression of BMSCs was analyzed. OVX decreased bone quantity and quality (mineral content, morphology, and energy dissipation) of femur while those of mandible were not influenced. Cellular assays demonstrated that mandible BMSCs showed greater differentiation than femur BMSCs. Gene ontology pathway analysis indicated that the mandibular BMSCs showed most significant differential expression of genes in the regulatory pathways of osteoblast differentiation, SMAD signaling, cartilage development, and glucose transmembrane transporter activity. These findings suggested that active mandibular BMSCs maintain bone formation and mineralization by balancing the rapid bone resorption caused by estrogen deficiency. These characteristics likely help reduce the risk of osteoporotic fracture in postmenopausal jawbone.

Two Bioactive Compounds, Uniformides A and B, Isolated from a Culture of Nocardia uniformis IFM0856T in the Presence of Animal Cells.

Two new peptides named uniformides A and B (1 and 2, respectively) were isolated from the cultured extracts of Nocardia uniformis IFM0856T in the presence of mouse macrophage-like cell line J774.1, in modified Czapek-Dox medium. These compounds were not produced in a culture containing only N. uniformis but in one that also included J774.1. Compounds 1 and 2 showed high cytotoxicity against J774.1 and suppressed the production of nitric oxide, IL-6, and IL-1ß by inhibiting the NF-κB pathway.

Accuracy of three-dimensional printed models derived from cone-beam computed tomography.

OBJECTIVES: To determine the accuracy of three-dimensional (3D) printed models fabricated from cone-beam computed tomography (CBCT) scans of human mandibular dry skulls in comparison with models derived from intraoral scanner (IOS) data. MATERIALS AND METHODS: Six human mandibular dry skulls were scanned by IOS and CBCT. Digital models (DMs) constructed from the IOS and CBCT data were fabricated physically using a 3D printer. The width and thickness of individual teeth and intercanine and molar widths were measured using a digital caliper. The accuracy of the DMs was compared between IOS and CBCT. Paired t-tests were used for intergroup comparisons. RESULTS: All intraclass correlation coefficient values for the three measurements (mesial-distal, buccal-lingual, width) exceeded 0.9. For the mandibular teeth, there were significant discrepancies in model accuracy between the IOS (average discrepancies of 0.18 ± 0.08 mm and 0.16 ± 0.12 mm for width and thickness, respectively) and CBCT (0.28 ± 0.07 mm for width, 0.37 ± 0.2 mm for thickness; P < .01). Intercanine (P = .38) and molar widths (P = .41) showed no significant difference between groups. CONCLUSIONS: There was a statistically significant difference in the accuracy of DMs obtained from CBCT and IOS; however, this did not seem to result in any important clinical difference. CBCT could be routinely used as an orthodontic diagnostic tool and for appliance construction.

Thread shape, cortical bone thickness, and magnitude and distribution of stress caused by the loading of orthodontic miniscrews: finite element analysis.

Cortical bone thickness is assumed to be a major factor regulating miniscrew stability. We investigated stress distribution in two miniscrews with different thread shapes (type A and B) and in cortical bone of three different thicknesses using three-dimensional (3D) finite element (FE) models. More specifically, 3D FE models of two different miniscrews were created and placed obliquely or vertically into a cylindrical bone model representing different cortical bone thicknesses. When force was applied to the miniscrew, the stress distribution on the screw surface and in the peri-implant bone was assessed using FE methodology. Miniscrew safety was evaluated using a modified Soderberg safety factor. Screw head displacement increased with a decrease in cortical bone thickness, irrespective of screw type. The smallest minimum principal stresses on the screw surfaces remained constant in type A miniscrews on changes in cortical bone thickness. Minimum principal stresses also appeared on the cortical bone surface. Lower absolute values of minimum principal stresses were seen in type A miniscrews when placed vertically and with upward traction in obliquely placed type B miniscrews. Both miniscrews had acceptable safety factor values. Taken together, orthodontists should select and use the suitable miniscrew for each patient in consideration of bone properties.

Mechanical stability of orthodontic miniscrew depends on a thread shape.

Background/purpose: Primary stability of orthodontic miniscrew system is of great importance in maintaining stable anchorage during a treatment period. Thus, this study aimed to examine whether the thread shape of orthodontic miniscrew had an effect on its mechanical stability in bone. Materials and methods: Three different types of miniscrews (type A and B with a regular thread shape; type C with a novel thread shape) were placed in artificial bone block with different artificial cortical bone thickness of 1.5, 2.0 and 3.0 mm. Values of maximum insertion torque (MIT), removal torque (RT), torque ratio (TR), screw mobility, static stiffness (K), dynamic stiffness (K∗) and energy dissipation (tan Î´) ability were assessed for each miniscrew system. Results: The MIT, RT, TR and K of type C miniscrew were significantly greater than those of type A and B miniscrews when the miniscrews were placed in the thinner artificial bone. Furthermore, the TR value of type C miniscrew was more than 1, indicating the MRT value was larger than the MIT value in the novel miniscrew. The values of K∗ and tan Î´ were almost similar among the three types of miniscrews. Conclusion: The miniscrew with a novel thread shape showed a higher initial stability compared to those with a regular thread shape. Thus, in order to obtain a sufficient initial stability, it is important to select the type of screw thread that is appropriate for the thickness of the cortical bone.

Evaluation of clinical parameters for the stability of 2 types of miniscrews.

INTRODUCTION: The purpose of this research was to compare insertion techniques and effects on mechanical and clinical parameters between 2 types of miniscrews. METHODS: Forty-four consecutive patients whose orthodontic treatment involved the use of miniscrews (miniscrew A [MA] and miniscrew B [MB]) for anchorage were included in this study. Miniscrews were placed with predrilling or self-drilling; peak maximum insertion torque (MIT) and Periotest values were measured. Cone-beam computed tomography was performed after the insertion of miniscrews and root proximity determination; cortical bone thickness was also analyzed. Periotest values were measured after the application of orthodontic force. RESULTS: Self-drilling produced higher Periotest values (P <0.01) for MA and higher MIT (P <0.01) for MB with closer root proximity (P <0.05). MB had higher MIT and Periotest values with drilling compared with MA (P <0.05); MB also showed closer root proximity (P <0.05). Successful miniscrews had lower MIT (P <0.05) for MB and lower Periotest values (P <0.01) for both MA and MB, with significantly more distant root proximity (P <0.01). Self-drilling produced higher Periotest values at the time of placement (P <0.01) and after 4 weeks (P <0.05) in MA. Drilling produced higher Periotest values for MB at the time of placement (P <0.05). MIT had positive correlations with Periotest values for MB with self-drilling (P <0.01) and with root proximity for MA with drilling (P <0.01). Periotest values had negative correlations with root proximity for MA and the MB group with drilling (P <0.01). CONCLUSIONS: For miniscrews with larger diameters, higher MIT may result in more mobility (higher Periotest values). Drilling can avoid root contact and enhance primary stability, thus producing lower Periotest values.

Alterations in prefrontal cortical neuregulin-1 levels in post-pubertal rats with neonatal ventral hippocampal lesions.

Genetic studies in humans have implicated the gene encoding neuregulin-1 (NRG-1) as a candidate susceptibility gene for schizophrenia. Furthermore, it has been suggested that NRG-1 is involved in regulating the expression and function of the N-methyl-D-aspartate receptor and the GABAA receptor in several brain areas, including the prefrontal cortex (PFC), the hippocampus, and the cerebellum. Neonatal ventral hippocampal lesioned (NVHL) rats have been considered as a putative model for schizophrenia with characteristic post-pubertal alteration in response to stress and neuroleptics. In this study, we examined NRG-1, erb-b2 receptor tyrosine kinase 4 (erbB4), and phospho-erbB4 (p-erbB4) levels in the PFC and the distribution of NRG-1 in the NVHL rats by using immunoblotting and immunohistochemical analyses. Neonatal lesions were induced by bilateral injection of ibotenic acid in the ventral hippocampus of postnatal day 7 Sprague-Dawley (SD)-rats. NVHL rats showed significantly decreased levels of NRG-1 and p-erbB4 in the PFC compared to sham controls at post-pubertal period, while the level of erbB4 did not differ between sham and NVHL rats. Moreover, microinjection of NRG-1 into the mPFC improved NVHL-induced prepulse inhibition deficits. Our study suggests PFC NRG-1 alteration as a potential mechanism in schizophrenia-like behaviors in the NVHL model.

Influence of insertion depth on stress distribution in orthodontic miniscrew and the surrounding bone by finite element analysis.

We aimed to elucidate stress distribution in miniscrews and the surrounding bone when miniscrews inserted at different depths were implanted vertically or obliquely. The distributions of the equivalent stress on the screw surface and the minimum principal stress in the surrounding bone were calculated using finite element models. When the miniscrews were inserted vertically and obliquely, screw head displacement, greatest equivalent stress on the miniscrew surface, and absolute value of minimum principal stresses in the surrounding bone decreased with increasing insertion depth. Stresses in the obliquely inserted miniscrew with upward traction were smaller than in other insertion conditions, irrespective of insertion depth. With the application of orthodontic force, stress distribution around the miniscrew and surrounding bone is closely related to the insertion depth and insertion angle, which mutually affect each other. In particular, the obliquely inserted miniscrew with upward traction might be the most secure against screw failure and fracture.

Long-term Management of a Patient with Apert Syndrome.

AIM AND OBJECTIVE: To present an Apert syndrome patient with midfacial growth deficiency treated with Le Fort III distraction osteogenesis and subsequent two-jaw surgery. BACKGROUND: Apert syndrome is expressed as a severe and irregular craniosynostosis, midfacial hypoplasia, and symmetric syndactyly in the fingers and toes. For craniosynostosis syndromes, treatment planning is complex due to the disharmony between facial profile and occlusion. CASE DESCRIPTION: A 4-year-and-5-month-old boy, diagnosed with Apert syndrome, showed a concave profile accompanied with midfacial hypoplasia, moderate exorbitism, a reversed occlusion of -10.0 mm, an anterior open bite of -5.0 mm, and skeletal class III jaw-base relationship. The patient, aged 15 years and 4 months, underwent a Le Fort III osteotomy, and subsequent osteodistraction was performed via a rigid external distraction (RED) device. His midfacial bone was advanced by approximately 7.0 mm. One year after the distraction, preoperative treatment with 0.018-in preadjusted edgewise appliances was initiated. Two-jaw surgery with a Le Fort I osteotomy and bilateral sagittal split ramus osteotomy was performed after 42 months of preoperative orthodontic treatment. At the age of 20 years and 9 months, his facial profile dramatically changed to a straight profile, and an acceptable occlusion with an adequate interincisal relationship was obtained. A functional occlusion with an excellent facial profile was maintained throughout the 2-year retention period, although the upper dental arch width was slightly decreased, resulting in the recurrence of the left posterior crossbite. CONCLUSION: Our report indicates the necessity of long-term follow-up in patients with craniosynostosis because of syndrome-specific growth and methodologically induced relapse. CLINICAL SIGNIFICANCE: The two-stage operation combining early distraction osteogenesis and postgrowth orthognathic surgery proves to be an effective therapy for correcting midfacial hypoplasia and skeletal mandibular protrusion caused by Apert syndrome.

Regional variations of jaw bone characteristics in an ovariectomized rat model.

Postmenopausal osteoporosis causes severe loss of bone quantity and quality in limb bone but has a lesser effect on jaw bone. Thus, the objective of this study was to examine whether ovariectomy (OVX) and mastication alter the regional variation of jaw bone characteristics. Sprague-Dawley female rats (6 months) were given a bilateral OVX or a sham operation (SHAM) (n = 10 for each group). After 2 months post-OVX, the hemi-mandible from each rat was dissected. A micro-computed tomography based mean, standard deviation (SD), the lower and upper 5th percentile (Low5 and High5) values of tissue mineral density (TMD) histograms were assessed for whole bone (WB), alveolar bone (AB), cortical bone (CB), and trabecular bone (TB) regions. Morphology of TB and periodontal ligament (PDL) was also obtained. Layers of AB were segmented up to 400 µm from the PDL. Mechanical properties at the tissue level were measured by nanoindentation at the same site by a single loading-unloading cycle of indentation in hydration. The AB and TB regions had significantly lower TMD Mean, Low5, and High5 but higher SD than the CB region for both sham and OVX groups (p < 0.01). TMD parameters of the OVX group rapidly increased up to 60 µm away from the PDL and were significantly higher than those of the sham group starting at 280 µm and farther in the CB region (p < 0.05). All values of morphological and nanoindentation parameters were not significantly different between sham and OVX groups (p > 0.06). Estrogen deficiency induced by OVX did not deteriorate bone characteristics including mineral density, morphology, and nanoindentation parameters in rat mandibles. Masticatory loading had an effect on the TMD parameters at the limited region of AB. These results provide insight into why osteoporosis-associated jaw bone fractures are extremely rare.

Hemifacial Microsomia Caused by First and Second Brachial Arch Syndrome Treated with Orthodontic Approach: A Case Report.

AIM AND OBJECTIVE: To present a growing patient with unilateral mandibular hypoplasia and microtia involved in the first and second branchial arch syndrome (FSBAS) treated with functional appliance. BACKGROUND: The FSBAS comprises several developmental facial hypoplasia in ear and maxillofacial bones, resulting in hemifacial microsomia. Treatment for hemifacial microsomia varies greatly depending on the grade of mandibular deformities. Functional appliance treatment during growth period is available for mild to moderate mandibular deformities. However, there are few reports of hemifacial microsomia treated with functional appliance. CASE DESCRIPTION: The patient, an 8-year-and-5-month-old girl, had a chief complaint of mandibular deviation. She had been diagnosed with the FSBAS at birth. Her facial profile was straight and panoramic radiograph indicated that the mandibular ramal height of the affected side was about 60.4% compared to the unaffected side. The occlusal cant was 6°, and the right maxilla and mandible showed severe growth deficiency. At the age of 10 years, functional appliance with expander was used; for 2 years 6 months, the maxillomandibular growth was controlled and from panoramic radiograph, the ramus height of the affected side was increased to 65.0% compared to the unaffected left mandibular ramus. At the age of 12 years and 8 months, multibracket treatment was initiated. After 32 months of active treatment, proper occlusion with functional Class I canine and molar relationships was obtained, although facial asymmetry associated with the difference of ramus heights still existed. The resulting occlusion was stable during 1.5-year retention period. CONCLUSION: Our results indicated the importance of orthopedic treatment during growth period in the patient with hemifacial microsomia involving the FSBAS. CLINICAL SIGNIFICANCE: This report proposes an efficacy of conventional orthodontic treatment for growing patients with hemifacial microsomia involved in the FSBAS.

Mechanical and clinical evaluation of the effect of microscrew on root proximity and cortical bone thickness.

BACKGROUND/OBJECTIVES: Primary stability is required for successful use of microscrew. This study investigated correlations among biomechanical, morphological, and clinical values in relationship to root contact and different placement locations. MATERIALS/METHODS: Thirty-three microscrews were placed between the molars (n = 18) or in the body of the mandible (n = 15) in three pigs. Insertion torque, Periotest, resonance frequency analysis (RFA), and static and dynamic stiffness were measured. Cone beam computed tomography was performed before and after the insertion of microscrews. Interproximal microscrews were divided into root contacted microscrews (n = 9) and non-root contact microscrews (n = 9). Factorial analysis of variance was conducted, with significance set at P < 0.05. RESULTS: A significant difference was observed between bodily and root contacted microscrews in Periotest, RFA, static and dynamic stiffness, Tanδ, and bone density (RFA, P = 0.045; all others, P < 0.001). A significant difference was observed between bodily and non-root contact microscrews in Periotest, RFA, and bone density (RFA, P = 0.025; all others, P < 0.001). A significant difference was observed in static (P = 0.01) and dynamic (P = 0.038) stiffness between microscrews with and without contact. Dynamic stiffness (P = 0.02) and Tanδ (P = 0.03) showed significant correlations with Periotest results only in bodily microscrews. LIMITATIONS: Since a pig bone was used, some differences in the quality and quantity of the bone might be observed between humans. CONCLUSIONS/IMPLICATIONS: Stiffness values distinguished between microscrews with and without contact. Periotest and RFA results indicated that bodily microscrews were more stable than interproximal microscrews. Periotest and RFA may be useful with large, microscrews and/or in thick cortical bone, but further investigation is required to determine the stability of interproximal microscrews.

Evaluations of miniscrew type-dependent mechanical stability.

BACKGROUND: Miniscrew has been widely used as an absolute anchorage in orthodontic treatment. Types of miniscrew with different diameter, length, shape, and thread dimensions may have a substantial effect on mechanical stability of the miniscrew system. Thus, the objective of this study was to evaluate miniscrew type-dependent mechanical stability to assess mechanical properties of miniscrew systems in various thickness of artificial bone block using different measurement tools. METHODS: Two types of miniscrews (15 Tomas and 15 AbsoAnchor) were placed in artificial bone block with different thickness of 1.5, 2.0, 3.0 mm. Values of maximum insertion torque, removal torque, Periotest, implant stability quotient, static stiffness, dynamic stiffness, and energy dissipation ability were assessed for each miniscrew system. FINDINGS: The maximum insertion torque, removal torque, implant stability quotient, static and dynamic stiffness values significantly increased when the miniscrews were placed in thicker bone block while Periotest values decreased. The static stiffness, Periotest and implant stability quotient values were significantly correlated each other and also with other mechanical properties (p < 0.001) except tan δ (p > 0.35). However, the slopes of some correlations and absolute values of measurement were significantly different dependent on the miniscrew types (p < 0.025). INTERPRETATION: The current findings suggest that miniscrew type-dependent calibrations are required to estimate mechanical stability of the miniscrew systems despite the utilization of same measurement tool.