Influence of Hematocrit Level and Integrin αIIbßIII Function on vWF-Mediated Platelet Adhesion and Shear-Induced Platelet Aggregation in a Sudden Expansion.

Purpose: Shear-mediated thrombosis is a clinically relevant phenomenon that underlies excessive arterial thrombosis and device-induced thrombosis. Red blood cells are known to mechanically contribute to physiological hemostasis through margination of platelets and vWF, facilitating the unfurling of vWF multimers, and increasing the fraction of thrombus-contacting platelets. Shear also plays a role in this phenomenon, increasing both the degree of margination and the near-wall forces experienced by vWF and platelets leading to unfurling and activation. Despite this, the contribution of red blood cells in shear-induced platelet aggregation has not been fully investigated-specifically the effect of elevated hematocrit has not yet been demonstrated. Methods: Here, a microfluidic model of a sudden expansion is presented as a platform for investigating platelet adhesion at hematocrits ranging from 0 to 60% and shear rates ranging from 1000 to 10,000 s-1. The sudden expansion geometry models nonphysiological flow separation characteristic to mechanical circulatory support devices, and the validatory framework of the FDA benchmark nozzle. PDMS microchannels were fabricated and coated with human collagen. Platelets were fluorescently tagged, and blood was reconstituted at variable hematocrit prior to perfusion experiments. Integrin function of selected blood samples was inhibited by a blocking antibody, and platelet adhesion and aggregation over the course of perfusion was monitored. Results: Increasing shear rates at physiological and elevated hematocrit levels facilitate robust platelet adhesion and formation of large aggregates. Shear-induced platelet aggregation is demonstrated to be dependent on both αIIbßIII function and the presence of red blood cells. Inhibition of αIIbßIII results in an 86.4% reduction in overall platelet adhesion and an 85.7% reduction in thrombus size at 20-60% hematocrit. Hematocrit levels of 20% are inadequate for effective platelet margination and subsequent vWF tethering, resulting in notable decreases in platelet adhesion at 5000 and 10,000 s-1 compared to 40% and 60%. Inhibition of αIIbßIII triggered dramatic reductions in overall thrombus coverage and large aggregate formation. Stability of platelets tethered by vWF are demonstrated to be αIIbßIII-dependent, as adhesion of single platelets treated with A2A9, an anti-αIIbßIII blocking antibody, is transient and did not lead to sustained thrombus formation. Conclusions: This study highlights driving factors in vWF-mediated platelet adhesion that are relevant to clinical suppression of shear-induced thrombosis and in vitro assays of platelet adhesion. Primarily, increasing hematocrit promotes platelet margination, permitting shear-induced platelet aggregation through αIIbßIII-mediated adhesion at supraphysiological shear rates. Supplementary Information: The online version contains supplementary material available at 10.1007/s12195-024-00796-0.

Venous Thromboembolism: Review of Clinical Challenges, Biology, Assessment, Treatment, and Modeling.

Venous thromboembolism (VTE) is a massive clinical challenge, annually affecting millions of patients globally. VTE is a particularly consequential pathology, as incidence is correlated with extremely common risk factors, and a large cohort of patients experience recurrent VTE after initial intervention. Altered hemodynamics, hypercoagulability, and damaged vascular tissue cause deep-vein thrombosis and pulmonary embolism, the two permutations of VTE. Venous valves have been identified as likely locations for initial blood clot formation, but the exact pathway by which thrombosis occurs in this environment is not entirely clear. Several risk factors are known to increase the likelihood of VTE, particularly those that increase inflammation and coagulability, increase venous resistance, and damage the endothelial lining. While these risk factors are useful as predictive tools, VTE diagnosis prior to presentation of outward symptoms is difficult, chiefly due to challenges in successfully imaging deep-vein thrombi. Clinically, VTE can be managed by anticoagulants or mechanical intervention. Recently, direct oral anticoagulants and catheter-directed thrombolysis have emerged as leading tools in resolution of venous thrombosis. While a satisfactory VTE model has yet to be developed, recent strides have been made in advancing in silico models of venous hemodynamics, hemorheology, fluid-structure interaction, and clot growth. These models are often guided by imaging-informed boundary conditions or inspired by benchtop animal models. These gaps in knowledge are critical targets to address necessary improvements in prediction and diagnosis, clinical management, and VTE experimental and computational models.

Performance of a Hydrogel Coated Nitinol with Oligonucleotide-Modified Nanoparticles Within Turbulent Conditions of Blood-Contacting Devices.

INTRODUCTION: Hydrogels offer a wide range of applications in the antithrombotic modification of biomedical devices. The functionalization of these hydrogels with potentially drug-laden nanoparticles in the context of deviceassociated turbulence is critically under-studied. Thus, the purpose of this study was to use a hydrogel-coating nitinol surface as a model to understand the functions of hydrogels and the capture of nanoparticles under clinically relevant flow conditions. METHODS: Nitinol was coated by an oligonucleotide (ON) functionalized hydrogel. Nanoparticles were functionalized with complementary oligonucleotides (CONs). The capture of CONfunctionalized nanoparticles by the ON-functionalized hydrogel surfaces was studied under both static and dynamic attachment conditions. Fluorescent-labelling of nanoparticles was utilized to assess capture efficacy and resistance to removal by device-relevant flow conditions. RESULTS: The specificity of the ON-CON bond was verified, exhibiting a dose-dependent attachment response. The hydrogel coating was resistant to stripping by flow, retaining >95% after exposure to one hour of turbulent flow. Attachment of nanoparticles to the hydrogel was higher in the static condition than under laminar flow (p < 0.01), but comparable to that of attachment under turbulent flow. Modified nitinol samples underwent one hour of flow treatment under both laminar and turbulent regimes and demonstrated decreased nanoparticle loss following static conjugation rather than turbulent conjugation (36.1% vs 53.8%, p < 0.05). There was no significant difference in nanoparticle functionalization by upstream injection between laminar and turbulent flow. CONCLUSION: The results demonstrate promising potential of hydrogelfunctionalized nitinol for capturing nanoparticles using nucleic acid hybridization. The hydrogel structure and ONCON bond integrity both demonstrated a resistance to mechanical damage and loss of biomolecular functionalization by exposure to turbulence. Further investigation is warranted to highlight drug delivery and antithrombogenic modification applications of nanoparticle-functionalized hydrogels.

Heparin-Peptide Nanogranules for Thrombosis-Actuated Anticoagulation.

Despite nearly a century of clinical use as a blood thinner, heparin's rapid serum clearance and potential to induce severe bleeding events continue to urge the development of more effective controlled delivery strategies. Subcutaneous depots that steadily release the anticoagulant into circulation represent a promising approach to reducing overdose frequency, sustaining therapeutic concentrations of heparin in plasma, and prolonging anticoagulant activity in a safe and effective manner. Subcutaneously deliverable heparin-peptide nanogranules that allow for long-lasting heparin bioavailability in the circulatory system, while enabling on-demand activation of heparin's anticoagulant effects in the thrombus microenvironment, are reported. Biophysical studies demonstrate this responsive behavior is due to the sequestration of heparin within self-assembling peptide nanofibrils and its mechanically actuated decoupling to elicit antithrombotic effects at the clotting site. In vivo studies show these unique properties converge to allow subcutaneous nanogranule depots to extend heparin serum concentrations for an order of magnitude longer than standard dosing regimens while enabling prolonged and controlled anticoagulant activity. This biohybrid delivery system demonstrates a potentially scalable platform for the development of safer, easier to administer, and more effective antithrombotic nanotechnologies.

Ultrasound-Responsive Nanopeptisomes Enable Synchronous Spatial Imaging and Inhibition of Clot Growth in Deep Vein Thrombosis.

Deep vein thrombosis (DVT) is a life-threatening blood clotting condition that, if undetected, can cause deadly pulmonary embolisms. Critical to its clinical management is the ability to rapidly detect, monitor, and treat thrombosis. However, current diagnostic imaging modalities lack the resolution required to precisely localize vessel occlusions and enable clot monitoring in real time. Here, we rationally design fibrinogen-mimicking fluoropeptide nanoemulsions, or nanopeptisomes (NPeps), that allow contrast-enhanced ultrasound imaging of thrombi and synchronous inhibition of clot growth. The theranostic duality of NPeps is imparted via their intrinsic binding to integrins overexpressed on platelets activated during coagulation. The platelet-bound nanoemulsions can be vaporized and oscillate in an applied acoustic field to enable contrast-enhanced Doppler ultrasound detection of thrombi. Concurrently, nanoemulsions bound to platelets competitively inhibit secondary platelet-fibrinogen binding to disrupt further clot growth. Continued development of this synchronous theranostic platform may open new opportunities for image-guided, non-invasive, interventions for DVT and other vascular diseases.

The WinCF Model - An Inexpensive and Tractable Microcosm of a Mucus Plugged Bronchiole to Study the Microbiology of Lung Infections.

Many chronic airway diseases result in mucus plugging of the airways. Lungs of an individual with cystic fibrosis are an exemplary case where their mucus-plugged bronchioles create a favorable habitat for microbial colonization. Various pathogens thrive in this environment interacting with each other and driving many of the symptoms associated with CF disease. Like any microbial community, the chemical conditions of their habitat have a significant impact on the community structure and dynamics. For example, different microorganisms thrive in differing levels of oxygen or other solute concentrations. This is also true in the CF lung, where oxygen concentrations are believed to drive community physiology and structure. The methods described here are designed to mimic the lung environment and grow pathogens in a manner more similar to that from which they cause disease. Manipulation of the chemical surroundings of these microbes is then used to study how the chemistry of lung infections governs its microbial ecology. The method, called the WinCF system, is based on artificial sputum medium and narrow capillary tubes meant to provide an oxygen gradient similar to that which exists in mucus-plugged bronchioles. Manipulating chemical conditions, such as the media pH of the sputum or antibiotics pressure, allows for visualization of the microbiological differences in those samples using colored indicators, watching for gas or biofilm production, or extracting and sequencing the nucleic acid contents of each sample.