RESUMEN
The rapid and responsive capabilities of soft robots in perceiving, assessing, and reacting to environmental stimuli are highly valuable. However, many existing soft robots, designed to mimic humans and other higher animals, often rely on data centers for the modulation of mechanoelectrical transduction and electromechanical actuation. This reliance significantly increases system complexity and time delays. Herein, drawing inspiration from Venus flytraps, a soft robot employing a power modulation strategy is presented for active stimulus reaction, eliminating the need for a data center. This robot achieves mechanoelectrical transduction through Ni3(2,3,6,7,10,11-hexaiminotriphenylene)2 (Ni3(HITP)2) metal-organic framework (MOF) with an ultralow time delay (256 ns) and electromechanical actuation via graphite. The Joule heating effect in graphite is effectively modulated by Ni3(HITP)2 before and after the presence of pressure, thus enabling the stimulus reaction of soft robots. As demonstrated, three soft robots are created: low-level edge tongue robots, Venus flytrap robots, and high-level nerve-center-controlled dragonfly robots. This power modulation strategy inspires designs of edge soft robots and high-level robots with a human-like effective fusion of conditioned and unconditioned reflexes.
RESUMEN
Multi-functional actuation systems involve the mechanical integration of multiple actuation and sensor devices with external energy sources. The intricate combination makes it difficult to meet the requirements of lightweight. Hence, polypyrrole@graphene-bacterial cellulose (PPy@G-BC) films are proposed to construct multi-responsive and bilayer actuators integrated with multi-mode self-powered sensing function. The PPy@G-BC film not only exhibits good photo-thermoelectric (PTE) properties but also possesses good hydrophilicity and high Young's modulus. Thus, the PPy@G-BC films are used as active layers in multi-responsive bilayer actuators integrated with self-powered sensing functions. Here, two types of multi-functional actuators integrated with self-powered sensing functions is designed. One is a light-driven actuator that realizes the self-powered temperature sensing function through the PTE effect. Assisted by a machine learning algorithm, the self-powered bionic hand can realize intelligent gesture recognition with an accuracy rate of 96.8%. The other is humidity-driven actuators integrated a zinc-air battery, which can realize self-powered humidity sensing. Based on the above advantages, these two multi-functional actuators are ingeniously integrated into a single device, which can simultaneously perform self-powered temperature/humidity sensing while grasping objects. The highly integrated design enables the efficient utilization of environmental energy sources and complementary synergistic monitoring of multiple physical properties without increasing system complexity.
RESUMEN
Soft multi-layer actuators are smart, lightweight, and flexible, which can be used in a wide range of fields such as artificial muscles, advanced medical devices, and wearable devices. The research on the actuation property of the soft actuators has made significant progress, paving the way for the controllable motions of the actuators. However, compared with the intelligence and adaptability of life in nature, these actuators still have the problem of insufficient intelligence. The phenomenon is reflected in a lack of continuous supply of energy. Therefore, it has become a development trend to combine functions such as energy harvesting, storage, and conversion with actuators to build intelligent actuators. This concept presents a synopsis of the advancements made in soft actuators that have been coupled with the capabilities of electrical energy harvesting and storage. The design concepts and typical applications of this soft smart actuators are introduced in detail. Finally, the future research directions and applications of smart actuators are prospected from our perspective.
RESUMEN
In recent years, multifunctional actuators have received increasing attention and development. In particular, researchers have conducted extensive research on intelligent actuators with integrated sensing functions. Temperature is an important parameter for the deformation of bilayer thermal actuators. By obtaining the temperature information of a bilayer thermal actuator, the deformation amplitude and its state can be judged. Thus, there is an urgent need to develop a type of intelligent actuator with a self-powered temperature sensing function. Herein, Ti3C2Tx-based composites modified with bamboo nanofibers have been proposed and applied to intelligent actuators integrated with a self-powered temperature sensing function. By utilizing the coefficients of thermal expansion between Ti3C2Tx-bamboo nanofiber composites and a polyimide film, a bilayer photo/electro-driven thermal actuator is designed which shows a bending curvature as large as 1.9 cm-1. In addition, Ti3C2Tx-bamboo nanofiber composites have a Seebeck coefficient of -9.15 µV K-1, and are N-type thermoelectric materials and can be used as the component of self-powered temperature sensors. Finally, a series of practical applications were designed, including a light-driven floating actuator (with a moving speed of 5 mm s-1), biomimetic sunflowers, bionic tentacles, and a multifunctional gripper integrated with a self-powered temperature sensing function. In particular, the multifunctional grippers can output voltage signals carrying their temperature information without external complex power sources, demonstrating their potential for remote monitoring. The above results demonstrate that Ti3C2Tx-bamboo nanofiber composites have extensive practical applications in fields such as self-powered sensors, flexible thermoelectric generators, and soft actuators.
RESUMEN
The development of wearable electronics is restricted by the developments of supporting energy storage devices, especially flexible supercapacitors. Nowadays, miniaturized supercapacitors based on MXenes due to their obvious advantages in the specific capacity have received extensive attention. The energy existing in the surrounding environment has been used to directly charge energy storage devices. However, the hybrid wearable electronics integrated supercapacitors are mechanically connected through metal wires leading to non-compact devices. Thus, it is urgent to develop a general and universal method to fabricate high-performance robust MXene-based flexible electrodes with high electrical conductivity and apply them to self-chargeable supercapacitors and compact wearable devices. Herein, the bacterial cellulose (BC) nanofibers are used as a crosslinking agent to connect two-dimensional MXene nanosheets through the hydrogen bond, which greatly improves the mechanical strength of MXene-bacterial cellulose (MXene-BC) composite films (Young's modulus reaching 6.8 GPa). The supercapacitors made with the electrodes of MXene-BC composite films (BC content is 10%) present high capacitance behavior (areal capacitance up to 346 mF cm-2) because the introduction of BC nanofibers increases the interlayer spacing of MXene nanosheets, providing more storage space for the ions in the electrolyte. Then, a self-chargeable supercapacitor is proposed based on the combination of a zinc-air (Zn-air) battery and a supercapacitor. The self-chargeable supercapacitor can realize self-charging after dropping a drop of electrolyte solution into the Zn-air battery. The charging voltage of a single self-chargeable supercapacitor can reach 0.6 V after adding artificial sweat as the electrolyte. Finally, a smart wristband with the function of self-charging is proposed, which can absorb the sweat generated by the human for self-chargeable supercapacitors to drive the pedometer integrated within the smart wristband to work. The proposed self-chargeable supercapacitors are simple and effective, not restricted by the use environment, providing a promising way for self-powered wearable electronics.
RESUMEN
Sustainable biomass materials are promising for low-cost wearable piezoresistive pressure sensors, but these devices are still produced with time-consuming manufacturing processes and normally display low sensitivity and poor mechanical stability at low-pressure regimes. Here, an aqueous MXene ink obtained by simply ball-milling is developed as a conductive modifier to fabricate the multiresponsive bidirectional bending actuator and compressible MXene-plant fiber sponge (MX-PFS) for durable and wearable pressure sensors. The MX-PFS is fabricated by physically foaming MXene ink and plant fibers. It possesses a lamellar porous structure composed of one-dimensional (1D) MXene-coated plant fibers and two-dimensional (2D) MXene nanosheets, which significantly improves the compression capacity and elasticity. Consequently, the encapsulated piezoresistive sensor (PRS) exhibits large compressible strain (60%), excellent mechanical durability (10â¯000 cycles), low detection limit (20 Pa), high sensitivity (435.06 kPa-1), and rapid response time (40 ms) for practical wearable applications.
RESUMEN
In recent years, graphene oxide (GO)-based multi-responsive actuators have attracted great interest due to their board application in soft robots, artificial muscles, and intelligent mechanics. However, most GO-based actuators suffer from low mechanical strength. Inspired by the natural nacre, a graphene oxide-bacterial cellulose (GO-BC) film with a "brick and mortar" structure is constructed. Compared with the pure GO film, the tensile strength of the GO-BC film is increased by about 2 times. Benefiting from the rich oxygen-containing functional groups of GO sheets and BC nanofibers, the cracked GO-BC films can be pasted together with the help of water, which can be used to construct GO-BC films with multi-dimensional complex structures. Subsequently, a GO-BC/polymer actuator capable of responding to various stimuli is successfully developed through a complementary strategy of "active layer and inert layer". Further, based on the water-assisted pasting properties of GO-BC films, a series of GO-BC/polymer actuators with 3D complex deformations can be fabricated by pasting together two or more GO-BC/polymer actuators. Finally, the potential applications of multi-response GO-BC/polymer actuators in flexible robots, artificial muscles, and smart devices are demonstrated through a series of applications such as bionic sunflowers, octopus-inspired soft tentacles, and smart curtains.
Asunto(s)
Nácar , Celulosa , AguaRESUMEN
Recently, soft actuators capable of deforming in predictable ways under external stimuli have attracted increasing attention by showing great potential in emerging industries. However, limited efforts are being spent on the untethered actuators with multistable deformations. Also, there is a lack of mechanically guiding design principles for multistable structures. Here, the patterned aluminum/polydimethylsiloxane (Al/PDMS)-laminated films with surface wrinkles are fabricated by magnetron sputtering the Al layer on the PDMS substrate. By tuning the geometric parameters and surface constraints of the patterned Al/PDMS-laminated films, a series of solvent-driven actuators with multiform stable configurations (such as monostable arc, multistable cylinder, and monostable/bistable spiral) are proposed. The deformation mechanism is revealed using a linear elastic theory. Combined with the finite element analysis method, the deformations of Al/PDMS-laminated films with different surface constraints and geometric configurations are visually predicted. Besides, we modulate the deformation of different parts of the Z-shaped actuators by tuning the surface constraints in different regions of the Z-shaped Al/PDMS bilayer films to achieve multiple stable deformations in a single actuator. The concept offers a huge design scope for reconfigurable soft robots. Finally, two bionic applications are proposed to demonstrate the practical applications of the soft solvent-driven actuator based on the patterned Al/PDMS films in artificial muscles and bionic robotics. This work provides a strategy for the design and fabrication of programmable and controllable soft actuators, laying the foundation for a wide range of applications in smart materials.
RESUMEN
Actuators play an important role in the fields of intelligent robots and wearable electronics. Temperature has a great impact on the performances of many actuators. However, most of the traditional actuators only have an actuating function, failing to monitor and send real-time feedback of the temperature of the actuator. To solve the existing problem and break the single-function limit of traditional actuators, we propose a multi-functional light-driven actuator integrated with a temperature-sensing function, which is based on a carbon nanotube (CNT) and methylcellulose (MC) composite. When the CNT-MC film is assembled with biaxially oriented polypropylene (BOPP) to form a bilayer structure, the CNT-MC/BOPP actuator can be driven by near-infrared (NIR) light. Its morphing is based on thermal expansion differences between two layers and shrinkage of MC induced by water loss. The maximal bending curvature is up to 1.03 cm-1. Meanwhile, the resistance of the actuator can change by about 10%, which realizes real-time temperature monitoring and feedback. Furthermore, we demonstrate two practical applications. First, the CNT-MC film can work as a temperature sensor, as its resistance changes with the temperature in real time. Second, we design an intelligent gripper, which can monitor the temperature during the entire working process. This multi-functional CNT-based device is expected to have a broad application prospect in artificial muscles, soft robotics and wearable electronics.
RESUMEN
Shape programming is critical for the fabrication of a light-driven actuator with complex shape morphing, which demonstrates potential applications in remote-controlled light-driven soft robots. However, it remains a huge challenge to obtain light-driven actuators having advantages of complex shape morphing, self-healing function, and facile fabrication simultaneously. Here, we report a facile strategy to obtain programmable and self-healing light-driven actuators with complex shape morphing. Various initial shapes of actuators can be programmed by synergetic use of water-shaping and -welding methods, which provides unlimited opportunities for fabricating actuators with predesigned shapes and subsequently demonstrating complex shape morphing. A template transfer method is used to prepare a single-layer graphene oxide (GO) film with asymmetric surface structures, which acts as the basic actuator and has the self-healing function based on the hydrophilic property of GO. It shows bending morphing under near-infrared (NIR) light irradiation due to the photothermal effect and asymmetric morphology on the opposite surfaces. Four more types of actuators are programmed from the basic actuator through the water-shaping method, which exhibits bending, unbending, twisting, and untwisting, respectively, under NIR light illumination. In addition, an S-shape actuator and a flower-shape actuator are programmed from the basic actuators through the water-welding method. By simply turning over the S-shape actuator, it can perform a bidirectional crawling motion. Finally, two intricate bionic light-driven actuators (tendril-shape and octopus-shape) are constructed, which are unattainable from conventional fabrication methods of actuators. We believe that this study will unlock a new way to programmable, self-healing, and light-driven soft robots with tunable and complex shape morphing.
RESUMEN
Among the various kinds of actuators, photoactuators with the advantages of wireless and remote manipulation have attracted the interest of many researchers. However, it is challenging to develop transparent photoactuators for camouflage soft robots, because most of the current photoactuators use colored or even black light-absorbing agents. Here, we fabricate a series of transparent actuators by employing localized-surface-plasmon-resonant semiconductor nanocrystals, which mainly respond to infrared light. In this way, we introduce the advantages of wireless and remote manipulation into the camouflage soft robots. Three semiconductor nanocrystals (In2O3:Sn, W18O49 and CuS nanocrystals) are fabricated as the photothermal conversion agents to construct the photoactuators. Owing to the weak absorption of visible light, the fabricated actuators exhibit high transparency (maximum transmittance >72% at 600 nm). Meanwhile, they demonstrate remarkable deformations upon near infrared light irradiation (bending curvature up to 0.66 cm-1). Finally, a worm-like crawling robot, a glasswing butterfly robot and a two-finger robot hand are constructed to demonstrate the ability of remote manipulation and inconspicuousness in both the robot appearance and the driving signal, attaining excellent passive camouflage function. These results provide a promising platform for remote-controlled camouflage soft robots and biomimic applications, which will be of significance in the field of soft robotics.
RESUMEN
Transparent actuators can be used in variable-focus lens, tactical displays and so on. However, previous transparent actuators made with dielectric elastomer mostly required high driving voltages (>1000 V) for actuation. In this work, we propose a new kind of low-voltage-driven transparent actuator, which is made with polymer and single-layer highly-oriented carbon nanotube (HOCNT) film composites, fully utilizing the favorable conductivity and high transparency of HOCNT film. The HOCNT-based transparent actuator shows a transmittance as high as 70%. When applying a voltage of 100 V, the transparent actuator bends visibly with a displacement of 14 mm. The actuation mechanism is a large volume change between polymers when they are Joule-heated by the electrical current. In addition, a solid-state lens based on the transparent actuator is fabricated, which demonstrates an obvious magnification effect with electrical-driven actuation. Finally, a bio-inspired optical system based on the solid-state lens is also constructed, which can mimic the focusing behavior of the human eyeball. The transparent actuator proposed in this work would have potential applications in optical devices, artificial muscles and soft robotics.
RESUMEN
Nowadays, urged by the high demand to reduce paper consumption, rewritable paper receives more and more attention. However, it is a great challenge to conveniently fabricate the rewritable paper which has long legible time of information and is easy to use simultaneously. Here, we report a new type of long-lasting rewritable paper based on color-memorizing thermochromic dye and photothermal-converting toner, which is fabricated by a two-step printing process. The rewritable paper demonstrates excellent rewriting performances (legible time > 6 months and reversibility > 100 times). The thermochromic effect is based on a temperature-driven phase change mechanism, accompanied by a lactone ring tautomerism of crystal violet lactone. The color of the rewritable paper rapidly changes from blue to colorlessness when the temperature is higher than 65 °C, and the colorless state can be maintained at room temperature. The color returns to blue when the temperature is lower than -10 °C. By using an electrothermal pen, a thermal printer, and near infrared (NIR) light, characters and images with high resolution can be handwritten, thermal-printed, and photoprinted on the rewritable paper. The written/printed information can be cleaned under lower temperature or can be quickly erased by NIR light. This rewritable paper is easy for large-scale production and will have promising opportunities in practical applications, such as long-lasting information recording and reading, rewritable label, reprintable displays, and so on.
RESUMEN
Multi-responsive actuators driven by different stimuli (e.g. light, humidity, electricity) have attracted intense attention recently for the advantages of being used in various environments and show enormous actuation. In this work, we propose humidity- and light-driven actuators based on carbon nanotube (CNT)-coated paper and a biaxially oriented polypropylene (BOPP) composite. The CNT-paper/BOPP actuator shows large bending actuation when driven by humidity change (curvature of 1.2 cm-1) and near infrared (NIR) light irradiation (curvature up to 1.6 cm-1). The great actuation performances outperform most other paper-based actuators. Finally, a smart gripper, of which the initial opening width can be enlarged, is fabricated on the basis of the CNT-paper/BOPP actuators. By utilizing the bidirectional bending motion of the actuator, the opening width of the gripper can increase to a width that is 4 times larger than its initial width, so as to grasp a large object. The gripper is also able to raise and move an object that is 20 times heavier than one actuator of the gripper. We assume that this new type of actuator has great potential in artificial muscle, soft robotics and biomimetic applications.
RESUMEN
Carbon-based electrothermal or photothermal actuators have attracted intense attention recently. They can directly convert electrical or light energy into thermal energy and exhibit obvious deformations. However, if the actuation mechanism is only limited to thermal expansion, the deformation amplitude is difficult to increase further. Moreover, complex shape-deformation is still challenging. Although a few materials were reported to realize twisting or untwisting actuation by cutting the samples into strips along different orientations, each single strip could perform only one shape-deformation mode. In this work, we propose multi-responsive actuators based on a graphene oxide (GO) and biaxially oriented polypropylene (BOPP) composite, which are designed with different shapes (strip-shape and helical-shape). The strip-shape GO/BOPP actuator shows great bending actuations when driven by humidity (curvature of up to 3.1 cm-1). Due to a developed dual-mode actuation mechanism, the actuator shows a bending curvature of 2.8 cm-1 when driven by near infrared (NIR) light. The great actuation outperforms most other carbon-based actuators. Then, an intelligent robot based on the GO/BOPP composite is fabricated, which can switch between the protection mode and weightlifting mode with different external stimuli. Inspired from plant tendrils, a bioinspired helical GO/BOPP actuator is further realized to show both twisting and untwisting actuations in a single actuator, fully mimicking the deformation of plant tendrils. Finally, a robot arm consisting of strip-shape and helical GO/BOPP actuators can grasp an object that is 2.9 times heavier than itself, demonstrating promising bioinspired applications.
Asunto(s)
Materiales Biomiméticos/química , Grafito/química , Óxidos/química , Robótica , PolipropilenosRESUMEN
Transparent actuators have been attracting emerging interest recently, as they demonstrate potential applications in the fields of invisible robots, tactical displays, variable-focus lenses, and flexible cellular phones. However, previous technologies did not simultaneously realize macroscopic transparent actuators with advantages of large-shape deformation, low-voltage-driven actuation and fast fabrication. Here, we develop a fast approach to fabricate a high-performance transparent actuator based on single-layer superaligned carbon nanotube sheet and polymer composites. Various advantages of single-layer nanotube sheets including high transparency, considerable conductivity, and ultra-thin dimensions together with selected polymer materials completely realize all the above required advantages. Also, this is the first time that a single-layer nanotube sheet has been used to fabricate actuators with high transparency, avoiding the structural damage to the single-layer nanotube sheet. The transparent actuator shows a transmittance of 72% at the wavelength of 550 nm and bends remarkably with a curvature of 0.41 cm(-1) under a DC voltage for 5 s, demonstrating a significant advance in technological performances compared to previous conventional actuators. To illustrate their great potential usage, a transparent wiper and a humanoid robot "hand" were elaborately designed and fabricated, which initiate a new direction in the development of high-performance invisible robotics and other intelligent applications with transparency.
RESUMEN
In recent years, electroactive polymers have been developed as actuator materials. As an important branch of electroactive polymers, electrothermal actuators (ETAs) demonstrate potential applications in the fields of artificial muscles, biomimetic devices, robotics, and so on. Large-shape deformation, low-voltage-driven actuation, and ultrafast fabrication are critical to the development of ETA. However, a simultaneous optimization of all of these advantages has not been realized yet. Practical biomimetic applications are also rare. In this work, we introduce an ultrafast approach to fabricate a curling actuator based on a newly designed carbon nanotube and polymer composite, which completely realizes all of the above required advantages. The actuator shows an ultralarge curling actuation with a curvature greater than 1.0 cm(-1) and bending angle larger than 360°, even curling into a tubular structure. The driving voltage is down to a low voltage of 5 V. The remarkable actuation is attributed not only to the mismatch in the coefficients of thermal expansion but also to the mechanical property changes of materials during temperature change. We also construct an S-shape actuator to show the possibility of building advanced-structure actuators. A weightlifting walking robot is further designed that exhibits a fast-moving motion while lifting a sample heavier than itself, demonstrating promising biomimetic applications.