Asunto(s)
Exposición Profesional , Salud Laboral , Animales , Peces , Ghana/epidemiología , Sector Informal , Fumar/epidemiologíaRESUMEN
A large concern with estimates of climate and health co-benefits of "clean" cookstoves from controlled emissions testing is whether results represent what actually happens in real homes during normal use. A growing body of evidence indicates that in-field emissions during daily cooking activities differ substantially from values obtained in laboratories, with correspondingly different estimates of co-benefits. We report PM2.5 emission factors from uncontrolled cooking (n = 7) and minimally controlled cooking tests (n = 51) using traditional chulha and angithi stoves in village kitchens in Haryana, India. Minimally controlled cooking tests (n = 13) in a village kitchen with mixed dung and brushwood fuels were representative of uncontrolled field tests for fine particulate matter (PM2.5), organic and elemental carbon (p > 0.5), but were substantially higher than previously published water boiling tests using dung or wood. When the fraction of nonrenewable biomass harvesting, elemental, and organic particulate emissions and modeled estimates of secondary organic aerosol (SOA) are included in 100 year global warming commitments (GWC100), the chulha had a net cooling impact using mixed fuels typical of the region. Correlation between PM2.5 emission factors and GWC (R2 = 0.99) implies these stoves are climate neutral for primary PM2.5 emissions of 8.8 ± 0.7 and 9.8 ± 0.9 g PM2.5/kg dry fuel for GWC20 and GWC100, respectively, which is close to the mean for biomass stoves in global emission inventories.
Asunto(s)
Contaminantes Atmosféricos , Contaminación del Aire Interior , Artículos Domésticos , Contaminantes Atmosféricos/análisis , Contaminación del Aire Interior/análisis , Biomasa , Culinaria , India , Material Particulado/análisisRESUMEN
Traditional biomass stoves are a major global contributor to emissions that impact climate change and health. This paper reports emission factors of particulate matter (PM2.5), carbon monoxide (CO), organic carbon (OC), black carbon (EC), optical absorption, and scattering from 46 South Asian, 48 Tibetan, and 4 Ugandan stoves. These measurements plus a literature review provide insight into the robustness of emission factors used in emission inventories. Tibetan dung stoves produced high average PM2.5 emission factors (23 and 43 gkg-1 for chimney and open stoves) with low average EC (0.3 and 0.7 gkg-1, respectively). Comparatively, PM2.5 from South Asian stoves (7 gkg-1) was in the range of previous measurements and near values used in inventories. EC emission factors varied between stoves and fuels ( p < 0.001), without corresponding differences in absorption; stoves that produced little EC, produced enough brown carbon to have about the same absorption as stoves with high EC emissions. In Tibetan dung stoves, for example, OC contributed over 20% of the absorption. Overall, EC emission factors were not correlated with PM2.5 and were constrained to low values, relative to PM2.5, over a wide range of combustion conditions. The average measured EC emission factor (1 gkg-1), was near current inventory estimates.
Asunto(s)
Contaminantes Atmosféricos , Material Particulado , Asia , Biomasa , Carbono , Culinaria , TibetRESUMEN
Emission factors of carbon monoxide (CO), particulate matter (PM2.5), organic carbon (OC), and elemental carbon (EC), as well as combustion efficiency and particle optical properties were measured during 37 uncontrolled cooking tests of residential stoves in Yunnan Province, China. Fuel mixtures included coal, woody biomass, and agricultural waste. Compared to previously published emission measurements of similar stoves, these measurements have higher CO and PM2.5 emission factors. Real-time data show two distinct burn phases: a devolatilization phase after fuel addition with high PM2.5 emissions and a solid-fuel combustion phase with low PM2.5 emissions. The average emission factors depend on the relative contributions of these phases, which are affected by the services provided by the stoves. Differences in stove and fuel characteristics that are not represented in emission inventories affect the variability of emission factors much more than do the type of solid fuel or stove. In developing inventories with highly variable sources such as residential solid-fuel combustion, we suggest that (1) all fuels should be accounted for, not just the primary fuel; (2) the household service provided should be emphasized rather than specific combinations of solid fuels and devices; and (3) the devolatilization phase should be explicitly measured and represented.
Asunto(s)
Contaminantes Atmosféricos , Artículos Domésticos , China , Culinaria , Material Particulado , IncertidumbreRESUMEN
Approximately 150 billion cubic meters (BCM) of natural gas is flared and vented in the world annually, emitting greenhouse gases and other pollutants with no energy benefit. About 7 BCM per year is flared in the United States, and half is from North Dakota alone. There are few emission measurements from associated gas flares and limited black carbon (BC) emission factors have been previously reported from the field. Emission plumes from 26 individual flares in the Bakken formation in North Dakota were sampled. Methane, carbon dioxide, and BC were measured simultaneously, allowing the calculation of BC mass emission factors using the carbon balance method. Particle optical absorption was measured using a three-wavelength particle soot absorption photometer (PSAP) and BC particle number and mass concentrations were measured with a single particle soot photometer. The BC emission factors varied over 2 orders of magnitude, with an average and uncertainty range of 0.14 ± 0.12 g/kg hydrocarbons in associated gas and a median of 0.07 g/kg which represents a lower bound on these measurements. An estimation of the BC emission factor derived from PSAP absorption provides an upper bound at 3.1 g/kg. These results are lower than previous estimations and laboratory measurements. The BC mass absorption cross section was 16 ± 12 m(2)/g BC at 530 nm. The average absorption Ångström exponent was 1.2 ± 0.8, suggesting that most of the light absorbing aerosol measured was black carbon and the contribution of light absorbing organic carbon was small.