Revision of metal-on-metal hip replacements with dual-mobility bearings and acetabular component retention.

Aims: In metal-on-metal (MoM) hip arthroplasties and resurfacings, mechanically induced corrosion can lead to elevated serum metal ions, a local inflammatory response, and formation of pseudotumours, ultimately requiring revision. The size and diametral clearance of anatomical (ADM) and modular (MDM) dual-mobility polyethylene bearings match those of Birmingham hip MoM components. If the acetabular component is satisfactorily positioned, well integrated into the bone, and has no surface damage, this presents the opportunity for revision with exchange of the metal head for ADM/MDM polyethylene bearings without removal of the acetabular component. Methods: Between 2012 and 2020, across two centres, 94 patients underwent revision of Birmingham MoM hip arthroplasties or resurfacings. Mean age was 65.5 years (33 to 87). In 53 patients (56.4%), the acetabular component was retained and dual-mobility bearings were used (DM); in 41 (43.6%) the acetabulum was revised (AR). Patients underwent follow-up of minimum two-years (mean 4.6 (2.1 to 8.5) years). Results: In the DM group, two (3.8%) patients underwent further surgery: one (1.9%) for dislocation and one (1.9%) for infection. In the AR group, four (9.8%) underwent further procedures: two (4.9%) for loosening of the acetabular component and two (4.9%) following dislocations. There were no other dislocations in either group. In the DM group, operating time (68.4 vs 101.5 mins, p < 0.001), postoperative drop in haemoglobin (16.6 vs 27.8 g/L, p < 0.001), and length of stay (1.8 vs 2.4 days, p < 0.001) were significantly lower. There was a significant reduction in serum metal ions postoperatively in both groups (p < 0.001), although there was no difference between groups for this reduction (p = 0.674 (cobalt); p = 0.186 (chromium)). Conclusion: In selected patients with Birmingham MoM hips, where the acetabular component is well-fixed and in a satisfactory position with no surface damage, the metal head can be exchanged for polyethylene ADM/MDM bearings with retention of the acetabular prosthesis. This presents significant benefits, with a shorter procedure and a lower risk of complications.

All-Arthroscopic Supraspinatus and Infraspinatus Muscle Advancement Leads to High Healing Rate and Excellent Outcomes in Patients With Massive, Retracted Rotator Cuff Tears, Even in Patients With Pseudoparalysis.

PURPOSE: To evaluate the clinical and radiographic outcomes of an all-arthroscopic rotator cuff repair technique involving muscle advancement and double-layer lasso loop (DLLL) repair for massive, retracted posterosuperior cuff tears. METHODS: This was a retrospective case series of patients with massive, retracted posterosuperior cuff tears who underwent the all-arthroscopic muscle advancement technique from March 2017 to September 2021, with a minimum follow-up of 12 months. Key steps included suprascapular nerve release, advancement of the supraspinatus and infraspinatus muscles, and DLLL repair. Preoperative and postoperative visual analog scale score for pain, American Shoulder and Elbow Surgeons (ASES) shoulder score, Constant score, University of California, Los Angeles (UCLA) shoulder score, active range of motion, and strength were compared. Preoperative and postoperative structural radiologic characteristics were analyzed. RESULTS: We evaluated 43 shoulders in 38 patients with a mean follow-up period of 18.8 months (range, 12-55 months). Of the 43 shoulders, 4 showed repair failure (9.3% retear rate). Visual analog scale, ASES, Constant, and UCLA scores significantly improved (P < .001) in patients who showed healing on postoperative magnetic resonance imaging (n = 39). ASES, Constant, and UCLA scores were significantly better in the healed group, with 100% exceeding the minimal clinically important difference for the ASES score and UCLA score and 84.2%, for Constant score. A lower proportion of patients in the retear group achieved the minimal clinically important difference. Active range of motion in all planes significantly improved for patients who had healed repairs (P < .001). Relative abduction strength, supraspinatus strength, and infraspinatus strength were at least 90% of those on the contralateral side. The recovery rate of pseudoparalysis (7 patients) was 100%. CONCLUSIONS: All-arthroscopic muscle advancement, coupled with DLLL repair, leads to a high healing rate with excellent clinical outcomes and recovery of strength to at least 90%, even in patients with pseudoparalysis. LEVEL OF EVIDENCE: Level IV, retrospective case series.

The Exeter-Trident THA with ceramic-on-ceramic-bearings: 10-year outcomes in 275 total hip arthroplasties.

AIMS: This study reports on the Exeter-Trident total hip arthroplasty (THA) using an alumina ceramic-on-ceramic bearing with 10-year clinical and radiographic follow-up. PATIENTS AND METHODS: Between January 2001 and January 2006, 275 THAs were performed. Mean age at surgery was 52.7 (17-86) years, with 84 patients (33.6%) aged <50 years. The primary outcome was all-cause construct survival at minimum 10 years. Secondary outcomes included functional and noise scores. Radiographs were compared between baseline and latest follow-up and assessed for component loosening, migration and lysis. RESULTS: No patient was lost to follow-up. Mean follow-up for surviving patients was 12.5 (9.5-15.6) years. Kaplan-Meier survival for all-cause revision was 94.0% (95% CI, 90.5-97.5) at 14.3 years. 2 patients had a femoral component fracture. All scores improved significantly at latest follow-up. HSS-NQ for 247 hips (90.2%) at mean 9.1 (7.0-14.4) years post implantation showed most hips (93.1%) reported no more than occasional noise. At minimum 5 years, radiolucency around the acetabular component was observed in 2 hips (0.8%), and lysis at the interface in 1 hip (0.4%). On the femoral side, endosteal lysis was observed in 7 hips. CONCLUSIONS: The Exeter-Trident THA with alumina ceramic-on-ceramic bearings performed well in this population. Patients are at low risk of revision in the first decade. However, there is a small risk of stem fracture as a late complication and some patients experience significant noise.

Mixed manufacturer dual mobility bearing and the Exeter V40 Stem: is it safe? Short-term results in primary and revision hip replacement.

The aim is to review clinical and radiological outcomes for all cases of primary and revision THA, combining a cemented stem (Exeter V40) with a dual mobility component from a different manufacturer (SERF Novae), to evaluate whether concerns regarding mixing components from different manufacturers are justified. We identified 72 hip replacements performed between May 2010 and December 2015 using the SERF Novae dual mobility cup with an Exeter V40 stem, the majority of which were cemented (90%) and revisions (58%). Patients were evaluated clinically and radiologically at a minimum of two years. There were five (6.9%) dislocations; three (4.2%) requiring revision - one of which was an intra-prosthetic disarticulation and two infections. No cases were lost to follow-up and 49 surviving cases were reviewed at a mean of 4.0 (range 1.8-8.1) years following surgery. Pain and functional outcome scores all improved. There were no radiological failures and no revisions for aseptic loosening of stem or cup. The combination of Exeter cemented stem with a dual mobility bearing from a different manufacturer results in acceptable short-term outcomes in terms of hip stability, revision rates and patient-reported measures.

Intraoperative cell salvage in revision hip arthroplasty.

Aims: The aim of this study was to perform a systematic review of the evidence for the use of intraoperative cell salvage in patients undergoing revision hip arthroplasty, and specifically to analyze the available data in order to quantify any associated reduction in the use of allogenic blood transfusion, and the volume which is used. Methods: An electronic search of MEDLINE (PubMed), Embase, Scopus, and the Cochrane Library was completed from the date of their inception to 24 February 2022, using a search strategy and protocol created in conjunction with the PRISMA statement. Inclusion criteria were patients aged > 18 years who underwent revision hip arthroplasty when cell salvage was used. Studies in which pre-donated red blood cells were used were excluded. A meta-analysis was also performed using a random effects model with significance set at p = 0.05. Results: Of the 283 studies which were identified, 11 were included in the systematic review, and nine in the meta-analysis. There was a significant difference (p < 0.001) in the proportion of patients requiring allogenic transfusion between groups, with an odds ratio of 0.331 (95% confidence interval (CI) 0.165 to 0.663) associated with the use of cell salvage. For a total of 561 patients undergoing revision hip arthroplasty who were treated with cell salvage, 247 (44.0%) required allogenic transfusion compared with 418 of 643 patients (65.0%) who were treated without cell salvage. For those treated with cell salvage, the mean volume of allogenic blood which was required was 1.95 units (390 ml) per patient (0.7 to 4.5 units), compared with 3.25 units (650 ml) per patient (1.2 to 7.0 units) in those treated without cell salvage. The mean difference of -1.91 units (95% CI -4.0 to 0.2) in the meta-analysis was also significant (p = 0.003). Conclusion: We found a a significant reduction in the need for allogenic blood transfusion when cell salvage was used in patients undergoing revision hip arthroplasty, supporting its routine use in these patients. Further research is required to determine whether this effect is associated with types of revision arthroplasty of differing complexity.

Three-Dimensional CT-Based Limb Length Evaluation Is Highly Dependent on Anatomical Landmark Selection and Pelvic Asymmetry.

Background: Pelvic skeletal asymmetry can result in rotational differences and morphologic bony prominence variance between the left and right hemipelvis. When selecting bony reference points for modern computed tomography-based robotic total hip arthroplasty planning, it is unclear which bony landmarks are the most reliable and accurate, especially in the presence of significant pelvic asymmetry. Methods: A retrospective study was conducted utilizing a database of computed tomography scans. Multiple bony landmarks in the pelvis and femur were selected for comparison, with the aim of measuring pelvic asymmetry. Specifically, the study measured the average difference in lateral offset between the left and right hemipelvis caused by pelvic asymmetry. Landmarks were also compared to determine the impact of pelvic asymmetry on hip length, femur length, and limb length discrepancies. Furthermore, a scenario was simulated in the software whereby a total hip replacement was inserted, potentially changing the hip length. The impact of pelvic reference point selection on the measurement of this simulated change in hip length was examined. Results: This study population showed widespread pelvic asymmetry. The anatomical landmarks of the opposite side cannot be relied upon for predicting the anatomy of the affected side. The center of rotation axis is more reliable than the inferior obturator foramen axis for hip length discrepancy due to pelvic asymmetry (P < .05). Conclusions: Current computer-assisted surgery THR software reports measurements of global offset and hip length that do not consider pelvic asymmetry. Surgeons are not given confidence ranges to represent the potential impact of asymmetry on the global offset and hip length values. Surgeons following these numbers to guide implant position may incur implant placement error should significant pelvic asymmetry be present in a given patient.

Incidence of Symptomatic Venous Thromboembolism (VTE) in 8,885 Elective Total Hip Arthroplasty Patients Receiving Post-operative Aspirin VTE Prophylaxis.

BACKGROUND: Venous thromboembolism (VTE) is a potentially reducible cause of morbidity and mortality in patients undergoing elective hip arthroplasty surgery. The balance of post-operative VTE prophylaxis and risk of post-operative haemorrhage remains at the forefront of surgeon's mind. The National Institute for Health and Care Excellence (NICE) published updated guidelines in 2018 which recommend the use of both mechanical and pharmacological methods in patients undergoing elective total hip arthroplasty (THA). OBJECTIVES: The aim of this study was to present the symptomatic VTE incidence in 8,885 patients who underwent THA between January 1998 and March 2018 with Aspirin as the primary agent for pharmacological thromboprophylaxis. Intermittent calf compression stockings are routinely used from the time of surgery until mobilization (usually the following day) with prophylactic doses of low molecular weight heparin (LMWH) during inpatient stay (from 2005 onwards) and then Aspirin 150mg once daily for six weeks on hospital discharge (or Aspirin only prior to 2005), with use of other therapies occasionally as required. METHODS: Analysis of prospective data collection from consecutive patients at a single institution undergoing THA was performed with the incidence of symptomatic deep vein thrombosis (DVT) and pulmonary embolism (PE) occurring within six months of the index operation as the primary outcome measure. Ninety-day all-cause mortality of this cohort of patients was also analysed. RESULTS: 8,885 patients were reviewed. This included 7230 primary, 224 complex primary and 1431 revision cases. The overall incidence of symptomatic VTE after elective THA was 1.11% (99/8885) - with the incidence of symptomatic DVT of 0.59% (52/8885) and the incidence of symptomatic PE of 0.53% (47/8885). There was no significant difference (χ2 test, p=0.239) in the symptomatic VTE incidence between primary (1.20% - 89/7230), complex primary (0.89% - 2/224) and revision cases (0.70% - 10/1431). The 90-day all-cause mortality was 0.88% (78/8885). Cardiovascular and respiratory disease were the main causes of death following surgery. Only 0.03% of deaths (n= 3) within 90 days of index surgery were due to PE. There was no significant difference (p=0.327) in length of stay (and hence amount of pharmacologic prophylaxis with LMWH received by patients before commencement of Aspirin) with the average length of stay for those patients who did not suffer a VTE of 6.8 days compared with 7.6 days for those who did suffer a VTE. CONCLUSION: Our results support the use of aspirin as an effective form of prophylaxis against symptomatic VTE following THA in contradiction to NICE and American Academy of Orthopaedic Surgery (AAOS) recommendations. It is not associated with an increased incidence in symptomatic DVT, PE or death compared to other published studies. The fact that it is inexpensive, readily available, requires no monitoring and does not pose an increased risk of bleeding are other advantages of using aspirin for VTE prophylaxis.

Survival of the Exeter V40 short revision (44/00/125) stem when used in primary total hip arthroplasty.

The Exeter V40 femoral stem is the most implanted stem in the National Joint Registry (NJR) for primary total hip arthroplasty (THA). In 2004, the 44/00/125 stem was released for use in 'cement-in-cement' revision cases. It has, however, been used 'off-label' as a primary stem when patient anatomy requires a smaller stem with a 44 mm offset. We aimed to investigate survival of this implant in comparison to others in the range when used in primary THAs recorded in the NJR. We analyzed 328,737 primary THAs using the Exeter V40 stem, comprising 34.3% of the 958,869 from the start of the NJR to December 2018. Our exposure was the stem, and the outcome was all-cause construct revision. We stratified analyses into four groups: constructs using the 44/00/125 stem, those using the 44/0/150 stem, those including a 35.5/125 stem, and constructs using any other Exeter V40 stem. In all 328,737 THAs using an Exeter V40 stem, the revision estimate was 2.8% (95% confidence interval (CI) 2.7 to 2.8). The 44/00/125 stem was implanted in 2,158 primary THAs, and the ten-year revision estimate was 4.9% (95% CI 3.6 to 6.8). Controlling for age, sex, year of operation, indication, and American Society of Anesthesiologists grade demonstrated an increased overall hazard of revision for constructs using the 44/00/125 stem compared to constructs using other Exeter V40 femoral stems (hazard ratio 1.8 (95% CI 1.4 to 2.3)). Although the revision estimate is within the National Institute for Health and Care Excellence ten-year benchmark, survivorship of constructs using the 44/00/125 stem appears to be lower than the rest of the range. Adjusted analyses will not take into account 'confounding by indication', e.g. patients with complex anatomy who may have a higher risk of revision. Surgeons and patients should be reassured but be aware of the observed increased revision estimate, and only use this stem when other implants are not suitable.

A biomechanical analysis of double-screw, double-button, and screw-button fixation constructs in patient-specific instrument-guided Latarjet procedure.

BACKGROUND: The Latarjet coracoid transfer procedure reliably stabilizes the glenohumeral joint for shoulder instability. However, complications such as graft osteolysis, nonunion and fracture continue to affect patient clinical outcomes. The double-screw (SS) construct is regarded as the gold standard method of fixation. SS constructs are associated with graft osteolysis. More recently, a double-button technique (BB) has been suggested to minimize graft-related complications. However, BB constructs are associated with fibrous nonunion. To mitigate this risk, a single screw combined with a single button (SB) construct has been proposed. It is thought that this technique incorporates the strength of the SS construct and allows micromotion superiorly to mitigate stress shielding-related graft osteolysis. AIMS: The primary aim of this study was to compare the failure load of SS, BB, and SB constructs under a standardized biomechanical loading protocol. The secondary aim was to characterize the displacement of each construct throughout testing. METHODS: Computed tomography scans of 20 matched-pair cadaveric scapulae were performed. Specimens were harvested and dissected free of soft tissue. SS and BB techniques were randomly assigned to specimens for matched-pair comparison with SB trials. A patient-specific instrument (PSI)-guided Latarjet procedure was performed on each scapula. Specimens were tested using a uniaxial mechanical testing device under cyclic loading (100 cycles, 1 Hz, 200 N/s) followed by a load-to-failure protocol (0.5 mm/s). Construct failure was defined by graft fracture, screw avulsion, and/or graft displacement of more than 5 mm. RESULTS: Forty scapulae from 20 fresh frozen cadavers with a mean age of 69.3 years underwent testing. On average, SS constructs failed at 537.8 N (SD 296.8), whereas BB constructs failed at 135.1 N (SD 71.4). SB constructs required a significantly greater load to fail compared with BB constructs (283.5 N, SD 162.8, P = .039). Additionally, SS (1.9 mm, IQR 0.87) had a significantly lower maximum total graft displacement during the cyclic loading protocol compared with SB (3.8 mm, IQR 2.4, P = .007) and BB (7.4 mm, IQR 3.1, P < .001) constructs. CONCLUSION: These findings support the potential of the SB fixation technique as a viable alternative to SS and BB constructs. Clinically, the SB technique could reduce the incidence of loading-related graft complications seen in the first 3 months of BB Latarjet cases. The study is limited to time-specific results and does not account for bone union or osteolysis.

Downsizing and minimising medialisation of the acetabular component: Novel technique to preserve bone in THA.

Standard practice for acetabular component placement in total hip arthroplasty (THA) is to medialise the acetabular component. Bone preservation techniques during primary THA are beneficial for possible future revisions. The goal of this study is to examine the effect of downsizing and minimising medialisation of the acetabular component on bone resection volume. The volume of bone resected during acetabular preparation for different sizes of components was calculated and the volume of bone preserved by downsizing the cup was determined. Minimising medialisation of the acetabular component by 1-3 mm from the true floor was calculated. Absolute values and percentage of bone volume preserved when acetabular components are downsized or less medialised is presented. Downsizing the acetabular component by one size (2 mm) preserves between 2.6 cm3 (size 40 vs 42) and 8.4 cm3 (size 72 vs 74) of bone volume and consistently reduces resected bone volume by at least 35% (range 35.2%-37.5%). Similarly, reducing medialisation of a 56 mm acetabular cup (as an example of a commonly implanted component) by 3 mm reduces bone loss by 5.9 cm3- 44% less bone volume resection. Downsizing and minimising medialisation of the cup in THA substantially preserves bone which may benefit future revision surgeries. Surgeons could consider implanting the smallest acceptable acetabular shell to preserve bone without compromising on head size.

Anterior deltoid muscle reflection using a deltopectoral approach is safe and does not influence outcome of reverse shoulder arthroplasty.

BACKGROUND: The deltopectoral approach is well accepted for shoulder arthroplasty procedures. The extended deltopectoral approach with detachment of the anterior deltoid from the clavicle allows increased joint exposure and can protect the anterior deltoid from traction injury. The efficacy of this extended approach has been demonstrated in anatomic total shoulder replacement surgery. However, this has not been shown in reverse shoulder arthroplasty (RSA). The primary aim of this study was to evaluate the safety of the extended deltopectoral approach in RSA. The secondary aim was to evaluate the performance of the deltoid reflection approach in terms of complications and surgical, functional, and radiologic outcomes up to 24 months after surgery. METHODS: A prospective, nonrandomized comparative study was performed between January 2012 and October 2020 including 77 patients in the deltoid reflection group and 73 patients in the comparative group. The decision for inclusion was based on patient and surgeon factors. Complications were recorded. Patients were followed up for ≥24 months to evaluate their shoulder function and undergo ultrasound evaluation. Functional outcome measures included the Oxford Shoulder Score, Disabilities of the Arm, Shoulder and Hand score, American Shoulder and Elbow Surgeons score, pain intensity (rated on visual analog scale [VAS] from 0 to 100), and range of motion (forward flexion, abduction, and external rotation). A regression analysis was performed to evaluate any factors of influence on the VAS score. RESULTS: There were no significant differences in the complication rate between the 2 groups (14.5% in deltoid reflection group and 13.8% in comparative group, P = .915). Ultrasound evaluation was available in 64 patients (83.1%), and no proximal detachment was observed. In addition, there were no significant differences in functional outcome measures both preoperatively and at 24 months after surgery between the groups assessed based on the mean VAS pain score, Oxford Shoulder Score, Disabilities of the Arm, Shoulder and Hand score, American Shoulder and Elbow Surgeons score, forward flexion, abduction, and external rotation. Adjustment for possible confounders in a regression model indicated that only prior surgery significantly influenced the VAS pain score after surgery (P = .031; 95% confidence interval, 0.574-11.67). Deltoid reflection (P = .068), age (P = .466), sex (P = .936), use of glenoid graft (P = .091), prosthesis manufacturer (P = .382), and preoperative VAS score (P = .362) were not of influence. DISCUSSION: The results of this study show that an extended deltopectoral approach for RSA is safe. Selected reflection of the anterior deltoid muscle improved exposure and prevented anterior deltoid muscle injury followed by reattachment. Patients had similar functional scores preoperatively and at 24 months postoperatively compared with a comparative group. Furthermore, ultrasound evaluation showed intact reattachments.

Partial retention of the acetabular cement mantle in aseptic revision hip arthroplasty: is it a viable option?

INTRODUCTION: Choosing the most appropriate reconstruction method when addressing a cemented cup at hip revision surgery can be a difficult decision. The aim of this study is to look into the practice and results of retaining a well-fixed medial acetabular cement mantle while removing loose superolateral cement. This practice goes against a preconceived principle that if some of the cement is loose it must all be removed. So far, no significant series looking at this is available in the literature. METHODS: We assessed a cohort of 27 patients in our institution where this practice was carried out and assessed their outcomes clinically and radiographically. RESULTS: Of the 27 patients, 24 had follow-up ⩾2 years (2.9-17.8, mean 9.3 years). There was 1 subsequent revision for aseptic loosening at 11.9 years, 1 first-stage revision of both stem and cup for infection at 1 month, and 2 patients died without a 2-year review. 2 patients did not have radiographs available for review. 2 of the 22 patients with radiographs available had changes in lucent lines, which were not clinically significant. CONCLUSION: Based on these results we conclude that retaining well-fixed medial cement during socket revision is a viable reconstruction option in carefully selected cases.

Achieving Target Cemented Femoral Stem Anteversion Using a 3-Dimensional Model.

Background: Total hip arthroplasty aims to provide patients with a pain-free and stable hip joint through optimization of biomechanics such as femoral anteversion. There are studies evaluating the limits of cementless stem version, however, none assessing the range of version achieved by a cemented collarless stem. A computed tomography (CT)-based study was performed, utilizing a contemporary robotic planning platform to assess the amount of rotation afforded by a cemented collarless stem, whilst maintaining native biomechanics. Methods: The study utilized 36 cadaveric hips. All had CT scans of the pelvis and hip joints. The CT scans were then loaded into a contemporary robotic planning platform. A stem that restored the patients native femoral offset was selected and positioned in the virtual femur. The stem was rotated while checking for cortical contact at the level of the neck cut. Cortical contact was regarded as the rotation limit, assessed in both anteversion and retroversion. Target range for stem anteversion was 10°-20°. Failure to achieve target version triggered a sequence of adjustments to simulate surgical decisions. Results: Native femoral offset and target version range was obtained in 29 of 36 (80.5%) cases. Following an adjustment sequence, 4 further stems achieved target anteversion with a compromise in offset of 2.3 mm. Overall 33 of 36 (91.7%) stems achieved the target anteversion range of 10°-20°. Conclusions: Target femoral stem anteversion can be achieved using a cemented, collarless stem in a CT-based 3-dimensional model in 80.5% of hips. With a small compromise in offset (mean 2.3 mm), this can be increased to 91.7%.

The Cost Effectiveness of Unicompartmental versus Total Knee Arthroplasty.

This study examines the potential cost savings for the health system and the community in a broadly accessible model through the increased utilization of unicompartmental knee arthroplasty (UKA) using robotic arm-assisted UKA (raUKA) versus conventional total knee arthroplasty (cTKA). We retrospectively reviewed 240 patients where the first 120 consecutive raUKA performed during this period were matched to 120 cTKAs. Clinical data from the medical records and costs for procedure for each component were collected. Bivariate analyses were performed on the data to determine if there were statistically significant differences by surgery type in clinical outcomes and financial costs. There was a significantly lower cost incurred for raUKA versus cTKA with an average saving of AU$7,179 per case. The operating time (86.0 vs. 75.9 minutes; p = 0.004) was significantly higher for raUKA, but the length of stay was significantly lower (1.8 vs. 4.8 days; p < 0.001). There was a significant difference in the use of opioids between raUKA and cTKA (125.0 morphine equivalent [ME] vs. 522.1 ME, p < 0.001). This study demonstrated that the use of raUKA rather than cTKA in suitably indicated patients may realize significant cost savings.

Is rationing of total hip arthroplasty justified? Working to optimize patient accessibility to surgery using long-term patient-reported outcome data.

AIMS: The aim of this study was to assess medium-term improvements following total hip arthroplasty (THA), and to evaluate what effect different preoperative Oxford Hip Score (OHS) thresholds for treatment may have on patients' access to THA and outcomes. METHODS: Patients undergoing primary THA at our institution with an OHS both preoperatively and at least four years postoperatively were included. Rationing thresholds were explored to identify possible deprivation of OHS improvement. RESULTS: Overall, 2,341 patients were included. Mean OHS was 19.7 (SD 8.2) preoperatively and 39.7 (SD 9.8) at latest follow-up. An improvement of at least eight-points, the minimally important change (MIC), was seen in 2,072 patients (88.5%). The mean improvement was 20.0 points (SD 10.5). If a rationing threshold of OHS of 20 points had been enforced, 90.8% of those treated would have achieved the MIC, but only 54.3% of our cohort would have had access to surgery; increasing this threshold to 32 would have enabled 89.5% of those treated to achieve the MIC while only depriving 6.5% of our cohort. The 'rationed' group of OHS > 20 had significantly better OHS at latest follow-up (42.6 vs 37.3; p < 0.001), while extending the rationing threshold above 32 showed postoperative scores were more significantly affected by the ceiling effect of the OHS. CONCLUSION: The OHS was not designed as a tool to ration healthcare, but if it had been used at our institution for this cohort, applying an OHS threshold of 20 to routine THA access would have excluded nearly half of patients from having a THA; a group in which over 85% had a significant improvement in OHS. Where its use for rationing is deemed necessary, use of a higher threshold may be more appropriate to ensure a better balance between patient access to treatment and chances of achieving good to excellent outcomes. Cite this article: Bone Jt Open 2022;3(3):196-204.

Cement-in-cement revision of the femur in infected hip arthroplasty in 89 patients across two centres.

AIMS: Femoral cement-in-cement revision is a well described technique to reduce morbidity and complications in hip revision surgery. Traditional techniques for septic revision of hip arthroplasty necessitate removal of all bone cement from the femur. In our two centres, we have been using a cement-in-cement technique, leaving the distal femoral bone cement in selected patients for septic hip revision surgery, both for single and the first of two-stage revision procedures. A prerequisite for adoption of this technique is that the surgeon considers the cement mantle to be intimately fixed to bone without an intervening membrane between cement and host bone. We aim to report our experience for this technique. METHODS: We have analyzed patients undergoing this cement-in-cement technique for femoral revision in infection, and present a consecutive series of 89 patients. Follow-up was undertaken at a mean of 56.5 months (24.0 to 134.7) for the surviving cases. RESULTS: Seven patients (7.9%) required further revision for infection. Ten patients died of causes unrelated to their infection before their two-year review (mean 5.9 months; 0.9 to 18.6). One patient was lost to follow-up at five months after surgery, and two patients died of causes unrelated to their hip shortly after their two-year review was due without attending. Of the remaining patients, 69 remained infection-free at final review. Radiological review confirms the mechanical success of the procedure as previously described in aseptic revision, and postoperative Oxford Hip Scores suggest satisfactory functional outcomes. CONCLUSION: In conclusion, we found that retaining a well-fixed femoral cement mantle in the presence of infection and undertaking a cement-in-cement revision was successful in 82 of the patients (92.1%) in our series of 89, both in terms of eradication of infection and component fixation. These results are comparable to other more invasive techniques and offer significant potential benefits to the patient. Cite this article: Bone Joint J 2022;104-B(2):212-220.

Ankle fracture management using smartphone multimedia messaging service (MMS) imaging - How reliable and to what point?

BACKGROUND: The use of smartphones and multimedia messaging service (MMS) continues to increase in day to day orthopaedic clinical practice. However, there is limited evidence to support the safe utilisation of MMS. OBJECTIVES: The aim of this study was to correlate the performance of MMS imaging to picture archiving and communication systems (PACS) imaging within the setting of diagnosis and management of ankle fractures. METHODS: The ankle fracture radiograph series of 82 consecutive patients were evaluated by five orthopaedic consultant specialists. A questionnaire regarding diagnosis and preferred management was completed separately for each patient using smartphone and PACS images. Statistical analysis was performed using Intraclass Correlation Coefficient (ICC). RESULTS: Ankle fracture diagnosis showed strong to excellent correlation both inter- and intraobserver MMS vs PACS when using the Weber (0.815, 0.988), Anatomical (0.858, 0.988), and AO classification systems (0.855, 0.985). MMS was less reliable than PACS in determining many management options. CONCLUSION: The reliability of ankle fracture classification using MMS image viewing was not significantly different to interpretation on PACS workstations. Smartphone use in ankle fracture classification is supported by this study. Smartphone use was less accurate than PACS in devising management plans and future use should be limited to making only initial plans that must be corroberated with PACS and intraoperative findings prior to definitive fixation.

B2 or not B2? That is the question: a review of periprosthetic fractures around cemented taper-slip femoral components.

AIMS: Periprosthetic fractures (PPFs) around cemented taper-slip femoral prostheses often result in a femoral component that is loose at the prosthesis-cement interface, but where the cement-bone interface remains well-fixed and bone stock is good. We aim to understand how best to classify and manage these fractures by using a modification of the Vancouver classification. METHODS: We reviewed 87 PPFs. Each was a first episode of fracture around a cemented femoral component, where surgical management consisted of revision surgery. Data regarding initial injury, intraoperative findings, and management were prospectively collected. Patient records and serial radiographs were reviewed to determine fracture classification, whether the bone cement was well fixed (B2W) or loose (B2L), and time to fracture union following treatment. RESULTS: In total, 47 B2W fractures (54.0%) and one B3 fracture (1.1%) had cement that remained well-fixed at the cement-bone interface. These cases were treated with cement-in-cement (CinC) revision arthroplasty. Overall, 43 fractures with follow-up united, and two patients sustained further fractures secondary to nonunion and required further revision surgery. A total of 19 B2L fractures (21.8%) and 19 B3 fractures (21.8%) had cement that was loose at the cement-bone interface. These cases were managed by revision arthroplasty with either cemented or uncemented femoral components, or proximal femoral arthroplasty. One case could not be classified. CONCLUSION: We endorse a modification of the original Vancouver system to include a subclassification of B2 fractures around cemented femoral prostheses to include B2W (where cement is well-fixed to bone) and B2L (where the cement is loose). Fractures around taper-slip design stems are more likely to fracture in a B2W pattern compared to fractures around composite beam design stems which are more likely to fracture in a B2L pattern. B2W fractures can reliably be managed with CinC revision. Cite this article: Bone Joint J 2021;103-B(1):71-78.

Which Pre- and Postoperative Coronal Plane Laxity Parameters Influence Patient Satisfaction and Function after Primary Total Knee Arthroplasty?

Soft tissue balancing, while accepted as crucial to total knee arthroplasty (TKA) outcomes, is incompletely defined as the subject of broad recommendations. We analyzed 120 computer-assisted, posterior stabilized TKA undertaken for osteoarthritis. Coronal plane laxity was measured, in the 91 varus and 29 valgus knees, prior to any bone resection or soft tissue release, and again after implant insertion. Soft tissue laxity parameters were correlated to the American Knee Society Score (2011) at a minimum follow-up of 12 months with a focus on patient function and satisfaction. Thirteen specific laxity parameters showed a significant correlation to satisfaction, one parameter correlated to function, and another to both functional and satisfaction outcomes. Most correlations were weak, the strongest related to postoperative decreases in coronal plane laxity. Greater preoperative varus but not valgus deformity was associated with higher satisfaction scores. Additionally, 30 patients who reported 40 of 40 satisfaction and that their TKA knee felt normal at all times did not have soft tissue balancing parameters distinguishing them from other subjects. Patient satisfaction and function outcomes demonstrated limited correlation to coronal plane soft tissue parameters. It appears that optimizing TKA satisfaction and function is not as simple as producing a narrow range of coronal laxity parameters. The ongoing debate around optimal coronal plane alignment and its subsequent effect on coronal plane soft tissues may not be as independently important as currently argued. Soft tissue balance may need to be considered as a more complex global envelope.

Diagnosis of overweight or obese malnutrition spells DOOM for hip fracture patients: A prospective audit.

BACKGROUND/AIMS: Crude diagnostic parameters such as BMI limit recognition of malnutrition in overweight and obese patients. This study applied a robust malnutrition diagnostic measure to investigate whether malnutrition impacts clinical outcomes in overweight or obese hip fracture inpatients. METHODS: A prospective, consecutive 12-month audit of inpatients admitted to a dedicated hip fracture unit with a BMI of ≥25 for surgical intervention. Univariate and logistic regression analyses were performed to investigate the relationship of demographics (age, gender), comparative measures (type of fracture, Charlson Comorbidity Index (CCI) on admission, time to surgery, type of surgery and anaesthesia, nutrition status) and outcome measures (delirium, time to mobilise post-operatively, length of stay, 12-month mortality). Malnutrition was defined using the International Classification of Diseases, Tenth Revision - Australian Modification protein-energy malnutrition criteria. RESULTS: 127 overweight or obese hip fracture patients for surgical intervention were included in analyses. Patients were predominantly older females (median 81.0, range 48-97 years; 66.9%). Malnutrition prevalence was not infrequent (18.3%) despite the median BMI of 28.3 (range 25.0-63.9). Mortality at 12-months (17.3%) was lower than routinely reported across broader hip fracture populations. Logistic regression modelling demonstrated that malnutrition increased the likelihood of 12-month mortality (OR: 4.47, 95% CI 1.27-15.77; p = 0.020), post-operative delirium (OR: 3.64, 95% CI 1.00 to 13.33; p = 0.051), and delayed post-operative mobility (OR: 3.29, 95% CI 1.05 to 10.31; p = 0.041), in overweight or obese hip fracture patients. Length of stay demonstrated poor association with all predictor measures. CONCLUSION: Hip fracture patients who are both overweight or obese, and malnourished, have significantly and substantially worse clinical outcomes than their well-nourished, albeit overweight or obese, counterparts. Comprehensive nutrition assessment measures should be applied to all hip fracture inpatients to ensure appropriate clinical nutrition care is appropriately directed.