Long-Axis Rotation of Jaws of Bamboo Sharks (Chiloscyllium plagiosum) During Suction Feeding.

Long-axis rotation (LAR) of the jaws may be an important component of vertebrate feeding mechanisms, as it has been hypothesized to occur during prey capture or food processing across diverse vertebrate groups including mammals, ray-finned fishes, and sharks and rays. LAR can affect tooth orientation as well as muscle fiber direction and therefore muscle power during feeding. However, to date only a handful of studies have demonstrated this LAR in vivo. Here, we use XROMM to document LAR of the upper and lower jaws in white-spotted bamboo sharks, Chiloscyllium plagiosum, during suction feeding. As the lower jaw begins to depress for suction expansion, both the upper jaw (palatoquadrate) and lower jaw (Meckel's cartilage) evert, such that their toothed surfaces move laterally, and then they invert with jaw closing. Eversion has been shown to tense the dental ligament and erect the teeth in some sharks, but it is not clear how this tooth erection would contribute to suction feeding in bamboo sharks. Two recent XROMM studies have shown LAR of the lower jaws during mastication in mammals and stingrays and our study extends LAR to suction feeding and confirms its presence in shark species. Examples of LAR of the jaws are becoming increasingly widespread across vertebrates with unfused mandibular symphyses. Unfused lower jaws are the plesiomorphic condition for most vertebrate lineages and therefore LAR may be a common component of jaw mechanics unless the mandibular symphysis is fused.

3D Bioprinted Implants for Cartilage Repair in Intervertebral Discs and Knee Menisci.

Cartilage defects pose a significant clinical challenge as they can lead to joint pain, swelling and stiffness, which reduces mobility and function thereby significantly affecting the quality of life of patients. More than 250,000 cartilage repair surgeries are performed in the United States every year. The current gold standard is the treatment of focal cartilage defects and bone damage with nonflexible metal or plastic prosthetics. However, these prosthetics are often made from hard and stiff materials that limits mobility and flexibility, and results in leaching of metal particles into the body, degeneration of adjacent soft bone tissues and possible failure of the implant with time. As a result, the patients may require revision surgeries to replace the worn implants or adjacent vertebrae. More recently, autograft - and allograft-based repair strategies have been studied, however these too are limited by donor site morbidity and the limited availability of tissues for surgery. There has been increasing interest in the past two decades in the area of cartilage tissue engineering where methods like 3D bioprinting may be implemented to generate functional constructs using a combination of cells, growth factors (GF) and biocompatible materials. 3D bioprinting allows for the modulation of mechanical properties of the developed constructs to maintain the required flexibility following implantation while also providing the stiffness needed to support body weight. In this review, we will provide a comprehensive overview of current advances in 3D bioprinting for cartilage tissue engineering for knee menisci and intervertebral disc repair. We will also discuss promising medical-grade materials and techniques that can be used for printing, and the future outlook of this emerging field.

Skeletal kinematics of the hyoid arch in the suction-feeding shark Chiloscyllium plagiosum.

White-spotted bamboo sharks, Chiloscyllium plagiosum, generate strong suction-feeding pressures that rival the highest levels measured in ray-finned fishes. However, the hyostylic jaw suspension of these sharks is fundamentally different from the actinopterygian mechanism, including more mobile hyomandibulae, with the jaws and ceratohyal suspended from the hyomandibulae. Prior studies have proposed skeletal kinematics during feeding in orectolobid sharks from indirect measurements. Here, we tested these hypotheses using XROMM to measure cartilage motions directly. In agreement with prior hypotheses, we found extremely large retraction and depression of the ceratohyal, facilitated by large protraction and depression of the hyomandibula. Somewhat unexpectedly, XROMM also showed tremendous long-axis rotation (LAR) of both the ceratohyal and hyomandibula. This LAR likely increases the range of motion for the hyoid arch by keeping the elements properly articulated through their large arcs of motion. XROMM also confirmed that upper jaw protraction occurs before peak gape, similarly to actinopterygian suction feeders, but different from most other sharks in which jaw protrusion serves primarily to close the mouth. Early jaw protraction results from decoupling the rotations of the hyomandibula, with much of protraction occurring before peak gape with the other rotations lagging behind. In addition, the magnitudes of retraction and protraction of the hyoid elements are independent of the magnitude of depression, varying the shape of the mouth among feeding strikes. Hence, the large variation in suction-feeding behavior and performance may contribute to the wide dietary breadth of bamboo sharks.

Broadening Participation in the Society for Integrative and Comparative Biology.

SYNOPSIS: The goal of the Society for Integrative and Comparative Biology's Broadening Participation Committee (SICB BPC) is to increase the number of underrepresented group (URG) members within the society and to expand their capabilities as future researchers and leaders within SICB. Our short-term 10-year goal was to increase the recruitment and retention of URG members in the society by 10%. Our long-term 25-year goal is to increase the membership of URG in the society through recruitment and retention until the membership demographic mirrors that of the US Census. Our plans to accomplish this included establishment of a formal standing committee, establishment of a moderate budget to support BPC activities, hosting professional development workshops, hosting diversity and mentor socials, and obtaining grant funds to supplement our budget. This paper documents broadening participation activities in the society, discusses the effectiveness of these activities, and evaluates BPC goals after 5 years of targeted funded activities. Over the past 5 years, the number of URG members rose by 5.2% to a total of 16.2%, members who report ethnicity and gender increased by 25.2% and 18%, respectively, and the number of members attending BPC activities has increased to 33% by 2016. SICB has made significant advances in broadening participation, not only through increased expenditures, but also with a commitment by its members and leadership to increase diversity. Most members realize that increasing diversity will both improve the Society's ability to develop different approaches to tackling problems within integrative biology, and help solve larger global issues that are evident throughout science and technology fields. In addition, having URG members as part of the executive committee would provide other URG members role models within the society, as well as have a voice in the leadership that represents diversity and inclusion for all scientists.

Ontogeny of Feeding Mechanics in Smoothhound Sharks: Morphology and Cartilage Stiffness.

The diet of dusky smoothhound sharks, Mustelus canis, shifts over ontogeny from soft foods to a diet dominated by crabs. This may be accompanied by changes in the skeletal system that facilitates the capture and processing of large and bulky prey. The hyoid arch, for example, braces the jaws against the cranium, and generates suction for prey capture and intraoral transport. In this study, ontogenetic changes in the hyoid arch were investigated by quantifying size, mineralization, and stiffness to determine whether increasingly stiffer cartilages are associated with the dietary switch. Total length and length of the hyomandibula and ceratohyal cartilages over ontogeny were the proxy for body size. Cross-sectional area, percent mineralization, and second moment of area were quantified in 28 individuals spanning most of the natural size range. Mechanical compression tests were conducted to compare flexural stiffness to size. Our results show that the morphological characters tested for the hyomandibular and ceratohyal cartilages scales isometrically with length. While stiffness of the hyomandibular and ceratohyal cartilages scales isometrically with length when assessed on morphological characters alone (second moment of area), this relationship becomes allometric when mechanical properties are included (flexural stiffness). Thus, while the hyoid arch elements grow isometrically, the mechanical properties dictate a scaling relationship that dwarfs morphological characteristics. The various combinations of morphologies and ontogenetic trajectories of chondrichthyan species illustrate the tremendous flexibility that they possess in the functional organization of the feeding apparatus.

Mechanical properties of the hyomandibula in four shark species.

Sharks have cartilaginous elements that support the jaws and are subjected to variable loads. The aim of this study was to understand how these elements, the hyomandibulae, respond to compressive loads, and to describe the structural level mechanical properties of mineralized cartilage. Mechanical stiffness and effective Poisson's ratio of the hyomandibular cartilage were measured in four species of sharks (white-spotted bamboo, Chiloscyllium plagiosum; spiny dogfish, Squalus acanthias; sandbar, Carcharhinus plumbeus; and dusky smoothhound, Mustelus canis). The former two are suction feeders, while the latter two are bite feeders. The hyomandibulae of suction feeders were expected to be stiffer because of the increased loads on their hyomandibulae. Bamboo sharks, as the strongest suction feeders, have the stiffest hyomandibula with a stiffness of 106.12 MPa. The stiffness of spiny dogfish, sandbar sharks, and dusky smoothhounds were 41.58, 58.00, and 49.62 MPa, respectively. The proportion of the minerals found in the cross-section of the hyomandibula determines the elements stiffness. Effective Poisson's ratio was measured at low axial strains and was highly variable ranging from 2.3 × 10(-5) to 4.3 × 10(-1). This implies that the behavior of the hyomandibulae under load will be very different in different species. Furthermore, this wide range of values for the ratio has potential implications for modeling techniques, such as finite element modeling, which use Poisson's ratio as a fundamental input.

Function of dorsal fins in bamboo shark during steady swimming.

To gain insight into the function of the dorsal fins in white-spotted bamboo sharks (Orectolobiformes: Hemiscyillidae) during steady swimming, data on three-dimensional kinematics and electromyographic recordings were collected. Bamboo sharks were induced to swim at 0.5 and 0.75 body lengths per second in a laminar flow tank. Displacement, lag and angles were analyzed from high-speed video images. Onset, offset, duration, duty cycle and asynchrony index were calculated from three muscle implants on each side of each dorsal fin. The dorsal fins were displaced more laterally than the undulating body. In addition, the dorsal tips had larger lateral displacement than the trailing edges. Increased speed was accompanied by an increase in tail beat frequency with constant tail beat amplitude. However, lateral displacement of the fins and duration of muscle bursts remained relatively constant with increased speed. The range of lateral motion was greater for the second dorsal fin (mean 33.3°) than for the first dorsal fin (mean 28.4°). Bending within the fin was greater for the second dorsal fin (mean 43.8°) than for the first dorsal fin (mean 30.8°). Muscle onset and offset among implants on the same side of each dorsal fin was similar. Three-dimensional conformation of the dorsal fins was caused by interactions between muscle activity, material properties, and incident flow. Alternating bilateral activity occurred in both dorsal fins, further supporting the active role of these hydrofoils in thrust production during steady swimming. The dorsal fins in bamboo sharks are capable of thrust production during steady swimming and do not appear to function as stabilizing structures.

Anatomy of the feeding apparatus of the lemon shark, Negaprion brevirostris.

The anatomy of the feeding apparatus of the lemon shark, Negaprion brevirostris, is investigated by gross dissection, computer axial tomography, and histological staining. The muscles and ligaments of the head associated with feeding are described. The upper and lower jaws are suspended by the hyoid arch, which in turn is braced against the chondrocranium by a complex series of ligaments. In addition, various muscles and the integument contribute to the suspension and stability of the jaws. The dual jaw joint is comprised of lateral and medial quadratomandibular joints that resist lateral movement of the upper and lower jaws on one another. This is important during feeding involving vigorous head shaking. An elastic ethmoplatine ligament that unites the anterior portion of the upper jaw to the neurocranium is involved with upper jaw retraction. The quadratomandibularis muscle is divided into four divisions with a bipinnate fiber arrangement of the two large superficial divisions. This arrangement would permit a relatively greater force per unit volume and reduce muscle bulging of the jaw adductor muscle in the spatially confined cheek region. Regions of relatively diffuse integumental ligaments overlying the adductor mandibulae complex and the levator palatoquadrati muscle, interspersed with localized regions of longer tendonlike attachments between the skin and the underlying muscle, permit greater musculoskeletal movement relative to the skin. The nomenclature of the hypobranchial muscles is discussed. In this shark they are comprised of the unsegmented coracomandibularis and coracohyoideus, and the segmented coracoarcualis. © 1995 Wiley-Liss, Inc.