RESUMEN
PURPOSE: To analyse the temperature of the corneal surface in keratoconus during corneal customized crosslinking (CXL) with a preserved epithelium (epi-on) under oxygen flow, and epi-off CXL in room air, and to assess the effect of pre-heating the oxygen. METHODS: This masked, intra-individual comparing randomized study included 14 participants with bilateral progressive keratoconus treated with bilateral CXL: one eye with epi-on CXL under a flow of 2.5 L/min oxygen; the fellow eye with epi-off CXL in room air. In a second setting involving 12 healthy participants, room-tempered oxygen was flushed over one eye and oxygen pre-heated to 37°C over the fellow eye. The corneal surface temperature was assessed with infrared photography. RESULTS: A reduction in corneal surface temperature was seen from the pre-treatment application of topical riboflavin in the epi-off group (-1.1 ± 1.0°C, p < 0.001). The temperature increased during the first half of the CXL treatment in both groups (+0.7 ± 1.2°C, p = 0.041 for epi-on; +0.7 ± 0.9°C, p = 0.023 for epi-off CXL, respectively). In epi-on CXL an overall temperature increase was seen during the treatment (+0.8 ± 1.2°C, p = 0.016). In the second setting, pre-heating the oxygen rendered a surface temperature increase of +1.8 ± 0.2°C (p < 0.001). CONCLUSION: In epi-off CXL, the application of topical room-tempered riboflavin decreases the corneal surface temperature, likely due to increased evaporation. A slight temperature increase is seen during CXL with both epi-on and epi-off CXL, albeit far below the corneal safety limit. The corneal temperature can, however, be increased by applying pre-heated oxygen, a possible approach to modify or augment the treatment effect in CXL.