RESUMEN
The vertical phase distribution of active layers plays a vital role in balancing exciton dissociation and charge transport for achieving efficient polymer solar cells (PSCs). The layer-by-layer (LbL) PSCs are commonly prepared by using sequential spin-coating method from donor and acceptor solutions with distinct solvents and solvent additives. The enhanced exciton dissociation is expected in the LbL PSCs with efficient charge transport in the relatively neat donor or acceptor layers. In this work, a series of LbL all-polymer solar cells (APSCs) were fabricated with PM6 as donor and PY-DT as acceptor, and triplet material m-Ir(CPmPB)3 is deliberately incorporated into PY-DT layer to prolong exciton lifetimes of active layers. The power conversion efficiency (PCE) of LbL APSCs is improved to 18.24% from 17.32% by incorporating 0.3 wt% m-Ir(CPmPB)3 in PY-DT layer, benefiting from the simultaneously enhanced short-circuit current density (JSC) of 25.17 mA cm-2 and fill factor (FF) of 74.70%. The enhancement of PCE is attributed to the efficient energy transfer of m-Ir(CPmPB)3 to PM6 and PY-DT, resulting in the prolonged exciton lifetime in the active layer and the increased exciton diffusion distance. The efficient energy transfer from m-Ir(CPmPB)3 to PM6 and PY-DT layer can be confirmed by the increased photoluminescence (PL) intensity and the prolonged PL lifetime of PM6 and PY-DT in PM6 + m-Ir(CPmPB)3 and PY-DT + m-Ir(CPmPB)3 films. This study indicates that the triplet material as solid additive has great potential in fabricating efficient LbL APSCs by prolonging exciton lifetimes in active layers.
RESUMEN
Organic polymer photocatalysts have achieved significant progress in photocatalytic hydrogen evolution, while developing the integrated organic polymers possessing the functions of photosensitizer, electron transfer mediator, and catalyst simultaneously is urgently needed and presents a great challenge. Considering that chalcogenoviologens are able to act as photosensitizers and electron-transfer mediators, a series of chalcogenoviologen-containing platinum(II)-based supramolecular polymers is designed, which exhibited strong visible light-absorbing ability and suitable bandgap for highly efficient photocatalytic hydrogen evolution without the use of a cocatalyst. The hydrogen evolution rate (HER) increases steadily with the decrease in an optical gap of the polymer. Among these "all-in-one" polymers, Se-containing 2D porous polymer exhibited the best photocatalytic performance with a HER of 3.09 mmol g-1 h-1 under visible light (>420 nm) irradiation. Experimental and theoretical calculations reveal that the distinct intramolecular charge transfer characteristics and heteroatom N in terpyridine unit promote charge separation and transfer within the molecules. This work could provide new insights into the design of metallo-supramolecular polymers with finely tuned components for photocatalytic hydrogen evolution from water.
RESUMEN
The development of high-performance electrocatalysts for energy conversion reactions is crucial for advancing global energy sustainability. The design of catalysts based on their electronic properties (e.g., work function) has gained significant attention recently. Although numerous reviews on electrocatalysis have been provided, no such reports on work function-guided electrocatalyst design are available. Herein, a comprehensive summary of the latest advancements in work function-guided electrocatalyst design for diverse electrochemical energy applications is provided. This includes the development of work function-based catalytic activity descriptors, and the design of both monolithic and heterostructural catalysts. The measurement of work function is first discussed and the applications of work function-based catalytic activity descriptors for various reactions are fully analyzed. Subsequently, the work function-regulated material-electrolyte interfacial electron transfer (IET) is employed for monolithic catalyst design, and methods for regulating the work function and optimizing the catalytic performance of catalysts are discussed. In addition, key strategies for tuning the work function-governed material-material IET in heterostructural catalyst design are examined. Finally, perspectives on work function determination, work function-based activity descriptors, and catalyst design are put forward to guide future research. This work paves the way to the work function-guided rational design of efficient electrocatalysts for sustainable energy applications.
RESUMEN
Cancer is one of the major noncommunicable diseases, responsible for millions of deaths every year worldwide. Though various cancer detection and treatment modalities are available today, many deaths occur owing to its late-stage detection and metastatic nature. Noninvasive detection using luminescence-based imaging tools is considered one of the promising techniques owing to its low cost, high sensitivity, and brightness. Moreover, these tools are unique and valuable as they can detect even the slightest changes in the cellular microenvironment. To achieve this, a fluorescent probe with strong tumor uptake and high spatial and temporal resolution, especially with high water solubility, is highly demanded. Recently, several water-soluble molecules with emission windows in the visible (400-700 nm), first near-infrared (NIR-I, 700-1000 nm), and second near-infrared (NIR-II, 1000-1700 nm) windows have been reported in literature. This review highlights recently reported water-soluble small organic fluorophores/dyes with applications in cancer diagnosis and therapeutics. We systematically highlight and describe the key concepts, structural classes of fluorophores, strategies for imparting water solubility, and applications in cancer therapy and diagnosis, i.e., theragnostics. We discuss examples of water-soluble fluorescent probes based on coumarin, xanthene, boron-dipyrromethene (BODIPY), and cyanine cores. Some other emerging classes of dyes based on carbocyclic and heterocyclic cores are also discussed. Besides, emerging molecular engineering methods to obtain such fluorophores are discussed. Finally, the opportunities and challenges in this research area are also delineated.
Asunto(s)
Colorantes Fluorescentes , Neoplasias , Solubilidad , Agua , Colorantes Fluorescentes/química , Humanos , Neoplasias/diagnóstico por imagen , Neoplasias/diagnóstico , Agua/química , Imagen ÓpticaRESUMEN
Luminescent organic radicals, especially those with photoactivated circularly polarized luminescence (CPL) features, hold great significance for cutting-edge optoelectronic applications, but their development still remains a challenge. In this study, we propose a novel strategy to achieve photoactivated CPL radicals by bonding two phosphine centers within an axial chiral system, yielding a compound of R/S-5,5-bis(diphenylphosphino)-4,4'-bibenzo[d][1,3]dioxole (R/S-BDP). The photoactivated R/S-BDP molecules in polymer matrix display a robust quantum yield of 19.8 % and a dissymmetry factor (glum) of 1.2×10-4, marking this work as the first example of photoactivated CPL radicals. Furthermore, the glum is improved to 1.0×10-2 by using a liquid crystal as host. Experimental and theoretical analyses reveal that R/S-BDP molecules, endowed with double phosphine cores in axial chirality, offer a direct way for intramolecular electron transfer upon photoirradiation. This leads to the generation of radical ionic pairs, which subsequently trigger the donor-acceptor arrangement through intermolecular electron transfer, thereby resulting in stable radical emission. The extended photoactivated BDP-F exhibits a remarkably high quantum efficiency of 57.8%. Ultimately, the distinctive photo-responsive CPL radical luminescence has been successfully used for information displays and anti-counterfeiting.
RESUMEN
2D conjugated metal-organic frameworks (c-MOFs) have emerged as promising materials for (opto)electronic applications due to their excellent charge transport properties originating from the unique layered-stacked structures with extended in-plane conjugation. The further advancement of MOF-based (opto)electronics necessitates the development of novel 2D c-MOF thin films with high quality. Cu-HHHATN (HHHATN: hexahydroxyl-hexaazatrinaphthylene) is a recently reported 2D c-MOF featuring high in-plane conjugation, strong interlayer π-π stacking, and multiple coordination sites, while the production of its thin-film form has not yet been reported. Herein, large-area Cu-HHHATN thin films with preferential orientation, high uniformity, and smooth surfaces are realized by using a convenient layer-by-layer growth method. Flexible photodetectors are fabricated, showing broadband photoresponse ranging from UV to short-wave infrared (370 to 1450 nm). The relatively long relaxation time of photocurrent, which arises from the trapping of photocarriers, renders the device's synaptic plasticity similar to that of biological synapses, promising its use in neuromorphic visual systems. This work demonstrates the great potential of Cu-HHHATN thin films in flexible optoelectronic devices for various applications.
RESUMEN
To reduce the mortality and morbidity associated with cancer, new cancer theranostics are in high demand and are an emerging area of research. To achieve this goal, we report the synthesis and characterization of piperazine-linked 1,8-naphthalimide-arylsulfonyl derivatives (SA1-SA7). These compounds were synthesized in good yields following a two-step protocol and characterized using multiple analytical techniques. In vitro cytotoxicity and fluorescent cellular imaging of the compounds were assessed against non-cancerous fibroblast (3T3) and breast cancer (4T1) cell lines. Although the former study indicated the safe nature of the compounds (viability = 82-95% at 1 µg/mL), imaging studies revealed that the designed probes had good membrane permeability and could disperse in the whole cell cytoplasm. In silico studies, including molecular docking, molecular dynamics (MD) simulation, and ADME/Tox results, indicated that the compounds had the ability to target CAIX-expressing cancers. These findings suggest that piperazine-linked 1,8-naphthalimide-arylsulfonyl derivatives are potential candidates for cancer theranostics and a valuable backbone for future research.
Asunto(s)
Naftalimidas , Neoplasias , Humanos , Simulación del Acoplamiento Molecular , Piperazina , Imagen MolecularRESUMEN
Eagle jugular syndrome is an uncommon condition caused by compression of an elongated styloid process onto the internal jugular vein. Its presentation is non-specific but may represent in severe clinical consequences including venous thrombosis and intracranial haemorrhage. Thorough understanding of local anatomy is important in understanding the pathogenesis and establishing the diagnosis. Our case reported here illustrates the use of multimodality imaging, including dynamic Computer tomography manoeuvre, in identifying the site of obstruction and guidance towards successful surgical treatment.
Asunto(s)
Águilas , Hipertensión Intracraneal , Osificación Heterotópica , Hueso Temporal/anomalías , Humanos , Animales , Hipertensión Intracraneal/diagnóstico por imagen , Hipertensión Intracraneal/etiología , Hipertensión Intracraneal/cirugía , Hueso Temporal/diagnóstico por imagen , Hueso Temporal/cirugía , Imagen MultimodalRESUMEN
A simple and efficient method for the ruthenium-catalyzed 1,6-hydroalkylation of para-quinone methides (p-QMs) with ketones via the in situ activation of C(sp3)-H bonds has been disclosed. Without the need for preactivation of the substrates and oxidant, a broad range of p-QMs and ketones are well tolerated, producing the expected 1,6-hydroalkylation products with moderate to good yields. Step-by-step control experiments and DFT calculation were conducted systematically to gain insights for the plausible reaction mechanism. This finding may have potential application in the selective diarylmethylation of ketones at the α-C position in organic synthesis.
RESUMEN
Two new organo-europium complexes (OEuCs) [Eu(btfa)3(Bathphen)] (OEuC-1) and [Eu(tta)3(Bathphen)] (OEuC-2) where btfa and tta are the anions of 4,4,4-trifluoro-1-phenyl-1,3-butanedione and 2-thenoyltrifluoroacetone while Bathphen = Bathophenanthroline have been synthesized and characterized. Both complexes in the solid state exhibit strong red emissions with photoluminescence quantum yields (PLQYs) of 80% ± 10%. These complexes were tested as dopants in the emitting layer (EML) to fabricate red organic light emitting diodes (R-OLEDs). Through device engineering involving the amalgamation of appropriate host materials and complexes, we have achieved exceptional overall R-OLED performance for an OEuC-2 based device, with maximum current efficiency (CEmax) = 9.91 cd A-1, maximum power efficiency (PEmax) = 9.15 lm W-1, maximum external quantum efficiency (EQEmax.) = 6.24%, brightness (B) of 545 cd m-2, and (CIE)x,y = 0.620, 0.323 at J = 10 mA cm-2.
RESUMEN
Narrow-band deep-blue organic light-emitting diodes (OLEDs) have played a key role in the field of high-quality full-color displays. However, because of the considerable challenges of inherent band gaps, unbalanced carrier injection and the lack of molecular structures, narrow-band deep-blue emitters develop slowly compared with red- and green-emitting materials. Encouragingly, with the continuous efforts of scientists in recent years, great progress has been made in the molecule design and material synthesis of highly efficient narrow-band deep-blue emitters. The typical deep-blue emitters which exhibit narrow emission with a full width at half maximum of < 50 nm are summarized in this article. They are divided into the three categories: fluorescence, phosphorescence and thermally activated delayed fluorescence. The methods of molecular design for realizing narrow-band deep-blue emission are described in detail and future research directions are also discussed in this article.
RESUMEN
A copper-catalyzed aerobic oxidative/decarboxylative phosphorylation of aryl acrylic acids with P(III)-nucleophiles via the Michaelis-Arbuzov rearrangement for the synthesis of ß-ketophosphine oxides, ß-ketophosphinates, and ß-ketophosphonates is reported. The present reaction could be conducted effectively without the use of a ligand and a base. Various kinds of aryl acrylic acids and P(III)-nucleophiles are tolerated in the transformation, generating the desired ß-keto-organophosphorus compounds as a valuable class of phosphorus-containing intermediates with good to excellent yields. In addition, the possible mechanism and kinetic studies for the reaction have been explored by step-by-step control experiments and competitive experiments, and the results proved that this transformation may follow second-order chemical kinetics as well as involve a radical process.
RESUMEN
A pair of high-efficiency deep-red emissive ionic iridophosphors (Ira and Irb) showing high photoluminescence quantum yields (PLQYs) are rationally designed by using 1-(thiophen-2-yl)isoquinoline as the cyclometalating ligand. Two bulky tetraarylborate anions (tetraphenylborate and tetrakis(3,5-bis(trifluoromethyl)phenyl)borate) are selected to improve their PLQYs in both solution and aggregated states, which enables efficient electroluminescence via a solution-processed approach. The variation of the tetraarylborate anions also aims to tune the photophysical properties of these deep-red emissive iridophosphors. Both ionic iridophosphors emit intense deep-red room-temperature phosphorescence in both solution and aggregated states. The phosphorescence spectra of both complexes are similar (630 nm with a shoulder emission of 686 nm) in CH2Cl2, originating from the same cationic species of the complexes. Both complexes show high PLQYs in CH2Cl2 (0.41 for Ira, 0.43 for Irb) and neat films (0.27 for Ira, 0.34 for Irb). Moreover, they serve as triplet emitters to evaluate their performance in solution-processed deep-red electroluminescent devices. The maximum external quantum efficiencies for the deep-red electroluminescence are 7.3% with an emission maximum of 649 nm for Ira, and 10.2% with an emission maximum of 635 nm for Irb, respectively, implying that they are good candidates for high-performance electroluminescence.
RESUMEN
Two novel nona-coordinated Eu(III) complexes [Eu(btfa)3 (Ph-TerPyr)] (Eu-1) and [Eu(NTA)3 (Ph-TerPyr)] (Eu-2) have been synthesized and characterized. The structure of the complexes was elucidated by density functional theory (DFT) methods. The experimental photophysical properties of the complexes were investigated and complemented with theoretical calculations. Effective energy transfer (ET) pathways for the sensitized red luminescence is discussed. The complexes were tested as emitting layers (EML) in organic light emitting diodes (OLEDs). At the optimum doping concentration of 4â wt.%, the double-EML OLEDs of Eu-1 exhibited red electroluminescence (EL) with an EQE of 4.0 % and maximum brightness (B)=1179â cd/m2 , maximum current efficiency (ηc )=5.64â cd/A, and maximum power efficiency (ηp )=4.78â lm/W at the current density (J) of 10â mA/cm2 . Interestingly, the double-EML OLEDs of Eu-2 at the optimum concentration of 3â wt.%, displayed an outstanding EL performance with EQE of 7.32 % and B=838â cd/m2 , ηc =10.19â cd/A and ηp =10.33â lm/W at J=10â mA/cm2 . The EL performance of this device is among the best reported for devices incorporating a europium complex as a red emitter.
RESUMEN
Inspired by the significant advantages of the bottom-up synthesis whose structures and functionalities can be customized by the selection of molecular components, a 2D metal-organic framework (MOF) nanosheet Co-BTB-LB has been synthesized by a liquid-liquid interface-assisted method. The as-prepared Co-BTB-LB is identified by scanning electron microscopy/energy dispersive spectroscopy (SEM/EDX) and X-ray photoelectron spectroscopy (XPS), and the sheet-like structure is verified by scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), and atomic force microscopy (AFM). Co-BTB-LB electrode exhibits an excellent capacity of 4969.3 F g-1 at 1 A g-1 and good cycling stability with 75% capacity retention after 1000 cycles. The asymmetric supercapacitor device with Co-BTB-LB as the positive electrode shows a maximum energy density of 150.2 Wh kg-1 at a power density of 1619.2 W kg-1 and good cycling stability with a capacitance retention of 97.1% after 10000 cycles. This represents a state-of-the-art performance reported for asymmetric supercapacitor device using electroactive bottom-up metal-complex nanosheet, which will clearly lead to a significant expansion of the applicability of this type of 2D nanomaterials.
Asunto(s)
Complejos de Coordinación , Estructuras Metalorgánicas , Cobalto , Electrodos , Microscopía de Fuerza AtómicaRESUMEN
Developing deep-blue thermally activated delayed fluorescence (TADF) emitters with both high efficiency and color purity remains a formidable challenge. Here, we proposed a design strategy by integrating asymmetric oxygen-boron-nitrogen (O-B-N) multi-resonance (MR) unit into traditional N-B-N MR molecules to form a rigid and extended O-B-N-B-N MR π-skeleton. Three deep-blue MR-TADF emitters of OBN, NBN and ODBN featuring asymmetric O-B-N, symmetric N-B-N and extended O-B-N-B-N MR units were synthesized through the regioselective one-shot electrophilic C-H borylation at different positions of the same precursor. The proof-of-concept emitter ODBN exhibited respectable deep-blue emission with Commission International de l'Eclairage coordinate of (0.16, 0.03), high photoluminescence quantum yield of 93 % and narrow full width at half maximum of 26â nm in toluene. Impressively, the simple trilayer OLED employing ODBN as emitter achieved a high external quantum efficiency up to 24.15 % accompanied by a deep blue emission with the corresponding CIE y coordinate below 0.1.
RESUMEN
The design and development of functional materials with real-life applications are highly demanding. Understanding and controlling inter- and intra-molecular interactions provide opportunities to design new materials. A judicious manipulation of the molecular structure significantly alters such interactions and can boost selected properties and functions of the material. There is burgeoning evidence of the beneficial effects of non-covalent interactions (NCIs), showing that manipulating NCIs may generate functional materials with a wide variety of physical properties leading to applications in catalysis, drug delivery, crystal engineering, etc. This prompted us to review the implications of NCIs on the molecular packing, optical properties, and applications of functional π-conjugated materials. To this end, this tutorial review will cover different types of interactions (electrostatic, π-interactions, metallophilic, etc.) and their impact on π-conjugated materials. Attempts have also been made to delineate the effects of weak interactions on opto-electronic (O-E) applications.
RESUMEN
The excited-state manipulation of the phosphorescent iridium(III) complexes plays a vital role in their photofunctional applications. The development of the molecular design strategy promotes the creative findings of novel iridium(III) complexes. The current molecular design strategies for iridium(III) complexes mainly depend on the selective cyclometalation of the ligands with the iridium(III) ion, which is governed by the steric hindrance of the ligand during the cyclometalation. Herein, a new molecular design strategy (i.e., random cyclometalation strategy) is proposed for the effective excited-state manipulation of phosphorescent cyclometalated iridium(III) complexes. Two series of new and separable methoxyl-functionalized isomeric iridium(III) complexes are accessed by a one-pot synthesis via random cyclometalation, resulting in a dramatic tuning of the phosphorescence peak wavelength (â¼57 nm) and electrochemical properties attributed to the high sensitivity of their excited states to the position of the methoxyl group. These iridium(III) complexes show intense phosphorescence ranging from the yellow (567 nm) to the deep-red (634 nm) color with high photoluminescence quantum yields of up to 0.99. Two deep-red emissive iridium(III) complexes with short decay lifetimes are further utilized as triplet emitters to afford efficient solution-processed electroluminescence with reduced efficiency roll-offs.
RESUMEN
Two-dimensional metal-organic frameworks (2D MOFs) can be used as the cathodes for high-performance zinc-ion battery due to their large one-dimensional channels. However, the conventionally poor electrical conductivity and low structural stability hinder their advances. Herein, we report an alternately stacked MOF/MX heterostructure, exhibiting the 2D sandwich-like structure with abundant active sites, improved electrical conductivity and exceptional structural stability. Ex situ characterizations and theoretical calculations reveal a reversible intercalation mechanism of zinc ions and high electrical conductivity in the 2D heterostructure. Electrochemical tests confirm excellent Zn2+ migration kinetics and ideal pseudocapacitive behaviors. As a consequence, Cu-HHTP/MX shows a superior rate performance (260.1â mAh g-1 at 0.1â A g-1 and 173.1â mAh g-1 at 4â A g-1 ) and long-term cycling stability of 92.5 % capacity retention over 1000â cycles at 4â A g-1 .
RESUMEN
A mild and efficient Zn(II)-catalyzed regioselective 1,6-hydroarylation of para-quinone methides (p-QMs) with electron-rich arenes protocol is reported. A variety of electron-rich arenes and para-quinone methides are well tolerated under mild conditions, delivering a broad range of triarylmethanes in good to excellent yields. The present method also works well for the hydroarylation of p-QMs with other nucleophiles, such as aniline, indole and phenol derivatives, offering the corresponding triarylmethanes with good yields under the standard conditions. The possible mechanism for the formation of C(sp3 )-C(sp2 ) bonds in hydroarylation reactions has been explored by step-by-step control experiments, and the reaction may follow a second-order manner in a chemical kinetic study.