RESUMEN
Constructing structural materials from sustainable raw materials is considered an efficient way to reduce the potential threat posed by plastics. Nevertheless, challenges remain regarding combining excellent mechanical and thermal properties, especially the balance of strength and toughness. Here, we report a 3D nanofiber network interfacial design strategy to strengthen and toughen all-natural structural materials simultaneously. The introduced protonated chitosan at the interface between the surface oxidized 3D nanonetwork of bacterial cellulose forms the interfacial interlocking structure of nanonetworks, achieving a robust physical connection and providing enough physical contact sites for chemical crosslinking. The obtained sustainable structural material successfully integrates excellent mechanical and thermal properties on the nanoscale of cellulose nanofibers, such as light weight, high strength, and superior thermal expansion coefficient. The relationship between structural design and comprehensive mechanical property improvement is analyzed in detail, providing a universal perspective to design sustainable high-performance structural materials from nanoscale building blocks.
RESUMEN
Electronic skin (e-skin) capable of acquiring environmental and physiological information has attracted interest for healthcare, robotics, and human-machine interaction. However, traditional 2D e-skin only allows for in-plane force sensing, which limits access to comprehensive stimulus feedback due to the lack of out-of-plane signal detection caused by its 3D structure. Here, a dimension-switchable bioinspired receptor is reported to achieve multimodal perception by exploiting film kirigami. It offers the detection of in-plane (pressure and bending) and out-of-plane (force and airflow) signals by dynamically inducing the opening and reclosing of sensing unit. The receptor's hygroscopic and thermoelectric properties enable the sensing of humidity and temperature. Meanwhile, the thermoelectric receptor can differentiate mechanical stimuli from temperature by the voltage. The development enables a wide range of sensory capabilities of traditional e-skin and expands the applications in real life.
Asunto(s)
Materiales Biomiméticos , Humanos , Materiales Biomiméticos/química , Dispositivos Electrónicos Vestibles , Temperatura , Biomimética/métodos , Humedad , Piel Artificial , Presión , Receptores Artificiales/químicaRESUMEN
The hinge of bivalve shells can sustain hundreds of thousands of repeating opening-and-closing valve motions throughout their lifetime. We studied the hierarchical design of the mineralized tissue in the hinge of the bivalve Cristaria plicata, which endows the tissue with deformability and fatigue resistance and consequently underlies the repeating motion capability. This folding fan-shaped tissue consists of radially aligned, brittle aragonite nanowires embedded in a resilient matrix and can translate external radial loads to circumferential deformation. The hard-soft complex microstructure can suppress stress concentration within the tissue. Coherent nanotwin boundaries along the longitudinal direction of the nanowires increase their resistance to bending fracture. The unusual biomineral, which exploits the inherent properties of each component through multiscale structural design, provides insights into the evolution of antifatigue structural materials.
Asunto(s)
Materiales Biocompatibles , Bivalvos , Animales , BiomineralizaciónRESUMEN
Engineering different two-dimensional materials into heterostructured membranes with unique physiochemical properties and molecular sieving channels offers an effective way to design membranes for fast and selective gas molecule transport. Here we develop a simple and versatile pyro-layering approach to fabricate heterostructured membranes from boron nitride nanosheets as the main scaffold and graphene nanosheets derived from a chitosan precursor as the filler. The rearrangement of the graphene nanosheets adjoining the boron nitride nanosheets during the pyro-layering treatment forms precise in-plane slit-like nanochannels and a plane-to-plane spacing of ~3.0 Å, thereby endowing specific gas transport pathways for selective hydrogen transport. The heterostructured membrane shows a high H2 permeability of 849 Barrer, with a H2/CO2 selectivity of 290. This facile and scalable technique holds great promise for the fabrication of heterostructures as next-generation membranes for enhancing the efficiency of gas separation and purification processes.
RESUMEN
Textile electronics are needed that can achieve strain-unaltered performance when they undergo irregular and repeated strain deformation. Such strain-unaltered textile electronics require advanced fibers that simultaneously have high functionalities and extreme robustness as fabric materials. Current synthetic nanocomposite fibers based on inorganic matrix have remarkable functionalities but often suffer from low robustness and poor tolerance against crack formation. Here, we present a design for a high-performance multifunctional nanocomposite fiber that is mechanically and electrically robust, which was realized by crosslinking titanium carbide (MXene) nanosheets with a slide-ring polyrotaxane to form an internal mechanically-interlocked network. This inorganic matrix nanocomposite fiber featured distinct strain-hardening mechanical behavior and exceptional load-bearing capability (toughness approaching 60 MJ m-3 and ductility over 27%). It retained 100% of its ductility after cyclic strain loading. Moreover, the high electrical conductivity (>1.1 × 105 S m-1 ) and electrochemical performance (>360 F cm-3 ) of the nanocomposite fiber can be well retained after subjecting the fiber to extensive (>25% strain) and long-term repeated (10 000 cycles) dimensional changes. Such superior robustness allowed for the fabrication of the nanocomposite fibers into various robust wearable devices, such as textile-based electromechanical sensors with strain-unalterable sensing performance and fiber-shaped supercapacitors with invariant electrochemical performance for 10 000 strain loading cycles.
RESUMEN
Bioinspired control of ion transport at the subnanoscale has become a major focus in the fields of nanofluidics and membrane separation. It is fundamentally important to achieve rectifying ion-specific transport in artificial ion channels, but it remains a challenge. Here, we report a previously unidentified metal-organic framework nanochannel (MOF NC) nanofluidic system to achieve unidirectional ultrafast counter-directional transport of alkaline metal ions and proton. This highly effective ion-specific rectifying transport behavior is attributed to two distinct mechanisms for metal ions and proton, elucidated by theoretical simulations. Notably, the MOF NC exhibits ultrafast proton conduction stemming from ultrahigh proton mobility, i.e., 11.3 × 10-7 m2 /V·s, and low energy barrier of 0.075 eV in MIL-53-COOH subnanochannels. Furthermore, the MOF NC shows excellent osmotic power-harvesting performance in reverse electrodialysis. This work expects to inspire further research into multifunctional biomimetic ion channels for advanced nanofluidics, biomimetics, and separation applications.
RESUMEN
There is an urgent need for developing electromechanical sensor with both ultralow detection limits and ultrahigh sensitivity to promote the progress of intelligent technology. Here we propose a strategy for fabricating a soft polysiloxane crosslinked MXene aerogel with multilevel nanochannels inside its cellular walls for ultrasensitive pressure detection. The easily shrinkable nanochannels and optimized material synergism endow the piezoresistive aerogel with an ultralow Young's modulus (140 Pa), numerous variable conductive pathways, and mechanical robustness. This aerogel can detect extremely subtle pressure signals of 0.0063 Pa, deliver a high pressure sensitivity over 1900 kPa-1, and exhibit extraordinarily sensing robustness. These sensing properties make the MXene aerogel feasible for monitoring ultra-weak force signals arising from a human's deep-lying internal jugular venous pulses in a non-invasive manner, detecting the dynamic impacts associated with the landing and take-off of a mosquito, and performing static pressure mapping of a hair.
Asunto(s)
Fenómenos Mecánicos , Animales , HumanosRESUMEN
The high fracture toughness of mollusk nacre is predominantly attributed to the structure-associated extrinsic mechanisms such as platelet sliding and crack deflection. While the nacre-mimetic structures are widely adopted in artificial ceramics, the extrinsic mechanisms are often weakened by the relatively low tensile strength of the platelets with a large aspect ratio, which makes the fracture toughness of these materials much lower than expected. Here, it is demonstrated that the fracture toughness of artificial nacre materials with high inorganic contents can be improved by residual stress-induced platelet strengthening, which can catalyze more effective extrinsic toughening mechanisms that are specific to the nacre-mimetic structures. Thereby, while the absolute fracture toughness of the materials is not comparable with advanced ceramic-based composites, the toughness amplification factor of the material reaches 16.1 ± 1.1, outperforming the state-of-the-art biomimetic ceramics. The results reveal that, with the merit of nacre-mimetic structural designs, the overall fracture toughness of the artificial nacre can be improved by the platelet strengthening through extrinsic toughening mechanisms, although the intrinsic fracture toughness may decrease at platelet level due to the strengthening. It is anticipated that advanced structural ceramics with exceeding performance can be fabricated through these unconventional strategies.
RESUMEN
Porous carbon materials demonstrate extensive applications for their attractive characteristics. Mechanical flexibility is an essential property guaranteeing their durability. After decades of research efforts, compressive brittleness of porous carbon materials is well resolved. However, reversible stretchability remains challenging to achieve due to the intrinsically weak connections and fragile joints of the porous carbon networks. Herein, it is presented that a porous all-carbon material achieving both elastic compressibility and stretchability at large strain from -80% to 80% can be obtained when a unique long-range lamellar multi-arch microstructure is introduced. Impressively, the porous all-carbon material can maintain reliable structural robustness and durability under loading condition of cyclic compressing-stretching process, similar to a real metallic spring. The unique performance renders it as a promising platform for making smart vibration and magnetism sensors, even capable of operating at extreme temperatures. Furthermore, this study provides valuable insights for creating highly stretchable and compressible porous materials from other neat inorganic components for diverse applications in future.
RESUMEN
Metal-air fuel cells with high energy density, eco-friendliness, and low cost bring significantly high security to future power systems. However, the impending challenges of low power density and high-current-density stability limit their widespread applications. In this study, an ultrahigh-power-density Zn-air fuel cell with robust stability is highlighted. Benefiting from the water-resistance effect of the confined nanopores, the highly active cobalt cluster electrocatalysts reside in specific nanopores and possess stable triple-phase reaction areas, leading to the synergistic optimization of electron conduction, oxygen gas diffusion, and ion transport for electrocatalysis. As a result, the as-established Zn-air fuel cell shows the best stability under high-current-density discharging (>90 h at 100 mA cm-2 ) and superior power density (peak power density: >300 mW cm-2 , specific power: 500 Wgcat -1 ) compared to most reported non-noble-metal electrocatalysts. The findings will provide new insights in the rational design of electrocatalysts for advanced metal-air fuel cell systems.
RESUMEN
Sustainable structural materials with light weight, great thermal dimensional stability, and superb mechanical properties are vitally important for engineering application, but the intrinsic conflict among some material properties (e.g., strength and toughness) makes it challenging to realize these performance indexes at the same time under wide service conditions. Here, we report a robust and feasible strategy to process cellulose nanofiber (CNF) into a high-performance sustainable bulk structural material with low density, excellent strength and toughness, and great thermal dimensional stability. The obtained cellulose nanofiber plate (CNFP) has high specific strength [~198 MPa/(Mg m-3)], high specific impact toughness [~67 kJ m-2/(Mg m-3)], and low thermal expansion coefficient (<5 × 10-6 K-1), which shows distinct and superior properties to typical polymers, metals, and ceramics, making it a low-cost, high-performance, and environmental-friendly alternative for engineering requirement, especially for aerospace applications.
RESUMEN
The ultrafast water transport in graphene nanoplatelets (GNPs) coating is attributed to the low friction passages formed by pristine graphene and the hydrophilic functional groups which provide a strong interaction force to the water molecules. Here, we examine the influence of the supporting substrate on the ultrafast water transport property of multilayer graphene coatings experimentally and by computational modelling. Thermally cured GNPs manifesting ultrafast water permeation are coated on different substrate materials, namely aluminium, copper, iron and glass. The physical and chemical structures of the GNPs coatings which are affected by the substrate materials are characterized using various spectroscopy techniques. Experimentally, the water permeation and absorption tests evidence the significant influence of the substrate on the rapid water permeation property of GNPs-coating. The water transport rates of the GNPs coatings correspond to the wettability and the free surface energy of their substrates where the most hydrophilic substrate induces the highest water transport rate. In addition, we conduct molecular dynamics (MD) simulations to investigate the transport rate of water molecules through multilayer GNPs adjacent to different substrate materials. The MD simulations results agree well with the experimental results inferring the strong influence of the substrate materials on the fast water transport of GNPs. Therefore, selection of substrate has to be taken into consideration when the GNPs-coating is placed into applications.
RESUMEN
The construction of biological proton channel analogues has attracted substantial interest owing to their wide potential in separation of ions, sensing, and energy conversion. Here, metal-organic framework (MOF)/polymer heterogeneous nanochannels are presented, in which water molecules are confined to disordered clusters in the nanometer-sized polymer regions and to ordered chains with unique molecular configurations in the 1D sub-1-nm porous MOF regions, to realize unidirectional, fast, and selective proton transport properties, analogous to natural proton channels. Given the nano-to-subnano confined water junctions, experimental proton conductivities in the polymer-to-MOF direction of the channels are much higher than those in the opposite direction, showing a high rectification up to 500 and one to two orders of magnitude enhancement compared to the conductivity of proton transport in bulk water. The channels also show a good proton selectivity over other cations. Theoretical simulations further reveal that the preferential and fast proton conduction in the nano-to-subnano channel direction is attributed to extremely low energy barriers for proton transport from disordered to ordered water clusters. This study opens a novel approach to regulate ion permeability and selectivity of artificial ion channels.
RESUMEN
Bio-sourced nanocellulosic materials are promising candidates for spinning high-performance sustainable macrofibers for advanced applications. Various strategies have been pursued to gain nanocellulose-based macrofibers with improved strength. However, nearly all of them have been achieved at the expense of their elongation and toughness. Inspired by the widely existed hierarchical helical and nanocomposite structural features in biosynthesized fibers exhibiting exceptional combinations of strength and toughness, we report a design strategy to make nanocellulose-based macrofibers with similar characteristics. By combining a facile wet-spinning process with a subsequent multiple wet-twisting procedure, we successfully obtain biomimetic hierarchical helical nanocomposite macrofibers based on bacterial cellulose nanofibers, realizing impressive improvement in their tensile strength, elongation and toughness simultaneously. The achievement certifies the validity of the bioinspired hierarchical helical and nanocomposite structural design proposed here. This bioinspired design strategy provides a potential platform for further optimizing or creating many more strong and tough nanocomposite fiber materials for diverse applications.
RESUMEN
Integrating thermodynamically favorable ethanol reforming reactions with hybrid water electrolysis will allow room-temperature production of high-value organic products and decoupled hydrogen evolution. However, electrochemical reforming of ethanol has not received adequate attention due to its low catalytic efficiency and poor selectivity, which are caused by the multiple groups and chemical bonds of ethanol. In addition to the thermodynamic properties affected by the electronic structure of the catalyst, the dynamics of molecule/ion dynamics in electrolytes also play a significant role in the efficiency of a catalyst. The relatively large size and viscosity of the ethanol molecule necessitates large channels for molecule/ion transport through catalysts. Perforated CoNi hydroxide nanosheets are proposed as a model catalyst to synergistically regulate the dynamics of molecules and electronic structures. Molecular dynamics simulations directly reveal that these nanosheets can act as a "dam" to enrich ethanol molecules and facilitate permeation through the nanopores. Additionally, the charge transfer behavior of heteroatoms modifies the local charge density to promote molecular chemisorption. As expected, the perforated nanosheets exhibit a small potential (1.39 V) and high Faradaic efficiency for the conversion of ethanol into acetic acid. Moreover, the concept in this work provides new perspectives for exploring other molecular catalysts.
RESUMEN
Superelastic carbon aerogels have been widely explored by graphitic carbons and soft carbons. These soft aerogels usually have delicate microstructures with good fatigue resistance but ultralow strength. Hard carbon aerogels show great advantages in mechanical strength and structural stability due to the sp3 -C-induced turbostratic "house-of-cards" structure. However, it is still a challenge to fabricate superelastic hard carbon-based aerogels. Through rational nanofibrous structural design, the traditional rigid phenolic resin can be converted into superelastic hard carbon aerogels. The hard carbon nanofibers and abundant welded junctions endow the hard carbon aerogels with robust and stable mechanical performance, including superelasticity, high strength, extremely fast recovery speed (860 mm s-1 ), low energy-loss coefficient (<0.16), long cycle lifespan, and heat/cold-endurance. These emerging hard carbon nanofiber aerogels hold a great promise in the application of piezoresistive stress sensors with high stability and wide detection range (50 kPa), as well as stretchable or bendable conductors.
RESUMEN
Woods provide bioinspiration for engineering materials due to their superior mechanical performance. We demonstrate a novel strategy for large-scale fabrication of a family of bioinspired polymeric woods with similar polyphenol matrix materials, wood-like cellular microstructures, and outstanding comprehensive performance by a self-assembly and thermocuring process of traditional resins. In contrast to natural woods, polymeric woods demonstrate comparable mechanical properties (a compressive yield strength of up to 45 MPa), preferable corrosion resistance to acid with no decrease in mechanical properties, and much better thermal insulation (as low as ~21 mW m-1 K-1) and fire retardancy. These bioinspired polymeric woods even stand out from other engineering materials such as cellular ceramic materials and aerogel-like materials in terms of specific strength and thermal insulation properties. The present strategy provides a new possibility for mass production of a series of high-performance biomimetic engineering materials with hierarchical cellular microstructures and remarkable multifunctionality.
RESUMEN
Polymer flooding is a promising chemical enhanced oil recovery (EOR) method, which realizes more efficient extraction in porous formations characterized with nanoscale porosity and complicated interfaces. Understanding the molecular mechanism of viscoelastic polymer EOR in nanopores is of great significance for the advancement of oil exploitation. Using molecular dynamics simulations, we investigated the detailed process of a viscoelastic polymer displacing oil at the atomic scale. We found that the interactions between polymer chains and oil provide an additional pulling effect on extracting the residual oil trapped in dead-end nanopores, which plays a key role in increasing the oil displacement efficiency. Our results also demonstrate that the oil displacement ability of polymer can be reinforced with the increasing chain length and viscoelasticity. In particular, a polymer with longer chain length exhibits stronger elastic property, which enhances the foregoing pulling effect. These findings can help to enrich our understanding on the molecular mechanism of polymer enhanced oil recovery and provide guidance for oil extraction engineering.
RESUMEN
The clean-up of viscous crude-oil spills is a global challenge. Hydrophobic and oleophilic oil sorbents have been demonstrated as promising candidates for oil-spill remediation. However, the sorption speeds of these oil sorbents for viscous crude oil are rather limited. Herein we report a Joule-heated graphene-wrapped sponge (GWS) to clean-up viscous crude oil at a high sorption speed. The Joule heat of the GWS reduced in situ the viscosity of the crude oil, which prominently increased the oil-diffusion coefficient in the pores of the GWS and thus speeded up the oil-sorption rate. The oil-sorption time was reduced by 94.6% compared with that of non-heated GWS. Besides, the oil-recovery speed was increased because of the viscosity decrease of crude oil. This in situ Joule self-heated sorbent design will promote the practical application of hydrophobic and oleophilic oil sorbents in the clean-up of viscous crude-oil spills.
RESUMEN
Reconfiguring the permanent shape of elastomeric microparticles has been impossible due to the incapability of plastic deformation in these materials. To address this limitation, we synthesize the first instance of microparticles comprising a covalent adaptable network (CAN). CANs are cross-linked polymer networks capable of reconfiguring their network topology, enabling stress relaxation and shape changing behaviors, and reversible addition-fragmentation chain transfer (RAFT) is the corresponding dynamic chemistry used in this work to enable CAN-based microparticles. Using nanoimprint lithography to apply controllable deformations we demonstrate that upon light stimulation microparticles are able to reconfigure their shape to permanently fix large aspect ratios and nanoscale surface topographies.