RESUMEN
As the preferred anode material for sodium-ion batteries, hard carbon (HC) confronts significant obstacles in providing a long and dominant low-voltage plateau to boost the output energy density of full batteries. The critical challenge lies in precisely enhancing the local graphitization degree to minimize Na+ ad-/chemisorption, while effectively controlling the growth of internal closed nanopores to maximize Na+ filling. Unfortunately, traditional high-temperature preparation methods struggle to achieve both objectives simultaneously. Herein, a transient sintering-involved kinetically-controlled synthesis strategy is proposed that enables the creation of metastable HCs with precisely tunable carbon phases and low discharge/charge voltage plateaus. By optimizing the temperature and width of thermal pulses, the high-throughput screened HCs are characterized by short-range ordered graphitic micro-domains that possess accurate crystallite width and height, as well as appropriately-sized closed nanopores. This advancement realizes HC anodes with significantly prolonged low-voltage plateaus below 0.1 V, with the best sample exhibiting a high plateau capacity of up to 325 mAh g-1. The energy density of the HC||Na3V2(PO4)3 full battery can therefore be increased by 20.7%. Machine learning study explicitly unveils the "carbon phase evolution-electrochemistry" relationship. This work promises disruptive changes to the synthesis, optimization, and commercialization of HC anodes for high-energy-density sodium-ion batteries.
RESUMEN
The CO2 reduction reaction (CO2RR) is a promising method that can both mitigate the greenhouse effect and generate valuable chemicals. The 2D-M2C12 with high-density transition metal single atoms is a potential catalyst for various catalytic reactions. Using an effective strategy, we screened 1s-Mn2C12 as the most promising electrocatalyst for the CO2RR in the newly reported 2D-M2C12 family. A low applied potential of -0.17 V was reported for the CO2-to-CH4 conversion. The relative weak adsorption of H atom and H2O in the potential range of -0.2 to -0.8 V, ensures the preferential adsorption of CO2 and the following production of CH4. The different loading amounts of Mn atoms on γ-graphyne (GY) were also investigated. The Mn atoms prefer doping in the nonadjacent triangular pores instead of the adjacent ones due to the repulsive forces between d-orbitals when the Mn loading is less than 32.3 wt % (5Mn). As the Mn concentration further increases, adjacent Mn atoms begin to appear, and the Mn@GY becomes metallic or half-metallic. The presence of four adjacent Mn atoms increases the d-band center of Mn@GY, particularly the dz2 center involved in CO2 adsorption, thereby enhancing the adsorption capacity for CO2. These findings indicate that 1s-Mn2C12 with high Mn atomic loadings is an excellent CO2RR electrocatalyst, and it provides new insights for designing efficient CO2RR electrocatalyst.
RESUMEN
A high-throughput screening using density functional calculations is performed to search for stable boride superconductors from the existing materials database. The workflow employs the fast frozen-phonon method as the descriptor to evaluate the superconducting properties quickly. Twenty-three stable candidates were identified during the screening. The superconductivity was obtained earlier experimentally or computationally for almost all found binary compounds. Previous studies on ternary borides are very limited. Our extensive search among ternary systems confirmed superconductivity in known systems and found several new compounds. Among these discovered superconducting ternary borides, TaMo2B2 shows the highest superconducting temperature of â¼12 K. Most predicted compounds were synthesized previously; therefore, our predictions can be examined experimentally. Our work also demonstrates that the boride systems can have diverse structural motifs that lead to superconductivity.
RESUMEN
In our study, we investigated the influence of the local structure of amorphous Li-La-Zr-O (a-LLZO) on Li-ion conductivity using ab initio molecular dynamics (AIMD). A-LLZO has shown promising properties in inhibiting the growth of lithium dendrites, making it a potential candidate for solid electrolytes in all-solid-state lithium batteries. The low Li-ion conductivity of a-LLZO is currently limiting its practical applications. Our findings revealed that the homogeneous distribution of Zr-O polyhedra within the pristine structure of a-LLZO contributes to enhanced Li-ion conductivity. By reducing the interconnections among Zr-O polyhedra, the AIMD-simulated a-LLZO sample achieved a Li-ion conductivity of 5.78 × 10-4 S/cm at room temperature, which is slightly lower than that of cubic LLZO (c-LLZO) with a Li-ion conductivity of 1.63 × 10-3 S/cm. Furthermore, we discovered that Li-ion conductivity can be influenced by adjusting the elemental ratios within a-LLZO. This suggests that fine-tuning the composition of a-LLZO can potentially further enhance its Li-ion conductivity and optimize its performance as a solid electrolyte in lithium batteries.
RESUMEN
A commonly used strategy to tackle the unstable interfacial problem between Li1.3Al0.3Ti1.7(PO4)3 (LATP) and lithium (Li) is to introduce an interlayer. However, this strategy has a limited effect on stabilizing LATP during long-term cycling or under high current density, which is due in part to the negative impact of its internal defects (e.g., gaps between grains (GBs)) that are usually neglected. Here, control experiments and theoretical calculations show clearly that the GBs of LATP have higher electronic conductivity, which significantly accelerates its side reactions with Li. Thus, a simple LiCl solution immersion method is demonstrated to modify the GBs and their electronic states, thereby stabilizing LATP. In addition to LiCl filling, composite solid polymer electrolyte (CSPE) interlayering is concurrently introduced at the Li/LATP interface to realize the internal-external dual modifications for LATP. As a result, electron leakage in LATP can be strictly inhibited from its interior (by LiCl) and exterior (by CSPE), and such dual modifications can well protect the Li/LATP interface from side reactions and Li dendrite penetration. Notably, thus-modified Li symmetrical cells can achieve ultrastable cycling for more than 3500 h at 0.4 mA cm-2 and 1500 h at 0.6 mA cm-2, among the best cycling performance to date.
RESUMEN
Boron-carbon compounds have been shown to have feasible superconductivity. In our earlier paper [Zheng et al., Phys. Rev. B, 2023, 107, 014508], we identified a new conventional superconductor of LiB3C at 100 GPa. Here, we aim to extend the investigation of possible superconductivity in this structural framework by replacing Li atoms with 27 different cations from periods 3, 4, and 5 under pressures ranging from 0 to 100 GPa. Using the high-throughput screening method of zone-center electron-phonon interaction, we found that ternary compounds like CaB3C, SrB3C, TiB3C, and VB3C are promising candidates for superconductivity. The consecutive calculations using the full Brillouin zone confirm that they have a Tc of <31 K at moderate pressures. Our study demonstrates that fast screening of superconductivity by calculating zone-center electron-phonon coupling strength is an effective strategy for high-throughput identification of new superconductors.
RESUMEN
It remains a great challenge in condensed matter physics to develop a method to treat strongly correlated many-body systems with balanced accuracy and efficiency. We introduce an extended Gutzwiller (EG) method incorporating a manifold technique, which builds an effective manifold of the many-body Hilbert space, to describe the ground-state (GS) and excited-state (ES) properties of strongly correlated electrons. We systematically apply an EG projector onto the GS and ES of a non-interacting system. Diagonalization of the true Hamiltonian within the manifold formed by the resulting EG wavefunctions gives the approximate GS and ES of the correlated system. To validate this technique, we implement it on even-numbered fermionic Hubbard rings at half-filling with periodic boundary conditions, and compare the results with the exact diagonalization (ED) method. The EG method is capable of generating high-quality GS and low-lying ES wavefunctions, as evidenced by the high overlaps of wavefunctions between the EG and ED methods. Favorable comparisons are also achieved for other quantities including the total energy, the double occupancy, the total spin and the staggered magnetization. With the capability of accessing the ESs, the EG method can capture the essential features of the one-electron removal spectral function that contains contributions from states deep in the excited spectrum. Finally, we provide an outlook on the application of this method on large extended systems.
RESUMEN
We perform a high-throughput screening on phonon-mediated superconductivity in a ternary metal diboride structure with alkali, alkaline earth, and transition metals. We find 17 ground states and 78 low-energy metastable phases. From fast calculations of zone-center electron-phonon coupling, 43 compounds are revealed to show electron-phonon coupling strength higher than that of MgB2. An anticorrelation between the energetic stability and electron-phonon coupling strength is identified. We suggest two phases, i.e., Li3ZrB8 and Ca3YB8, to be synthesized, which show reasonable energetic stability and superconducting critical temperature.
RESUMEN
We introduce a rotationally invariant approach combined with the Gutzwiller conjugate gradient minimization method to study correlated electron systems. In the approach, the Gutzwiller projector is parametrized based on the number of electrons occupying the onsite orbitals instead of the onsite configurations. The approach efficiently groups the onsite orbitals according to their symmetry and greatly reduces the computational complexity, which yields a speedup of20â¼50×in the minimal basis energy calculation of dimers. The computationally efficient approach promotes more accurate calculations beyond the minimal basis that is inapplicable in the original approach. A large-basis energy calculation of F2demonstrates favorable agreements with standard quantum-chemical calculations Bytautaset al(2007J. Chem. Phys.127164317).
RESUMEN
Silicene, a competitive two-dimensional (2D) material for future electronic devices, has attracted intensive attention in condensed matter physics. Utilizing an adaptive genetic algorithm (AGA), we identify a topological allotrope of silicene, named tilted penta (tPenta) silicene. Based on first-principles calculations, the geometric and electronic properties of tPenta silicene and its isoelectronic substitutions (Ge, Sn) are investigated. Our results indicate that tPenta silicene exhibits a semimetallic state with distorted Dirac cones in the absence of spin-orbit coupling (SOC). When SOC is considered, it shows semiconducting behavior with a gap opening of 2.4 meV at the Dirac point. Based on the results of invariant ( = 1) and the helical edge states, we demonstrate that tPenta silicene is a topological insulator. Furthermore, the effect of isoelectronic substitutions on tPenta silicene is studied. Two stoichiometric phases, i.e., tPenta Si0.333Ge0.667 and tPenta Si0.333Sn0.667 are found to retain the geometric framework of tPenta silicene and exhibit high stabilities. Our calculations show that both tPenta Si0.333Ge0.667 and tPenta Si0.333Sn0.667 are QSH insulators with enlarged band gaps of 32.5 meV and 94.3 meV, respectively, at the HSE06 level, offering great potential for practical applications at room temperature.
RESUMEN
Charge compensation mechanisms in the delithiation processes of LiNi1/3Co1/3Mn1/3O2 (NCM111) are compared in detail by the first-principles calculations with GGA and GGA+U methods under different U values reported in the literature. The calculations suggested that different sets of U values lead to different charge compensation mechanisms in the delithiation process. Co3+/Co4+ couples were shown to dominate the redox reaction for 1 ≥ x ≥ 2/3 by using the GGA+U 1 method (U 1 = 6.0 3.4 3.9 for Ni, Co, and Mn, respectively). However, by using the GGA+U 2 (U 2 = 6.0 5.5 4.2) method, the results indicated that the redox reaction of Ni2+/Ni3+ took place in the range of 1 ≥ x ≥ 2/3. Therefore, according to our study, experimental charge compensation processes during delithiation are of great importance to evaluate the theoretical calculations. The results also indicated that all the GGA+U i (i = 1, 2, 3) schemes predicted better voltage platforms than the GGA method. The oxygen anionic redox reactions during delithiation are also compared with GGA+U calculations under different U values. The electronic density of states and magnetic moments of transition metals have been employed to illustrate the redox reactions during the lithium extractions in NCM111. We have also investigated the formation energies of an oxygen vacancy in NCM111 under different values of U, which is important in understanding the possible occurrence of oxygen release. The formation energy of an O vacancy is essentially dependent on the experimental conditions. As expected, the decreased temperature and increased oxygen partial pressure can suppress the formation of the oxygen vacancy. The calculations can help improve the stability of the lattice oxygen.
RESUMEN
We review our recent work on the Gutzwiller conjugate gradient minimization method, anab initioapproach developed for correlated electron systems. The complete formalism has been outlined that allows for a systematic understanding of the method, followed by a discussion of benchmark studies of dimers, one- and two-dimensional single-band Hubbard models. In the end, we present some preliminary results of multi-band Hubbard models and large-basis calculations of F2to illustrate our efforts to further reduce the computational complexity.
RESUMEN
Among the promising high-capacity anode materials, SnO2 represents a classic and important candidate that involves both conversion and alloying reactions toward Li storage. However, the inferior reversibility of conversion reactions usually results in low initial Coulombic efficiency (ICE, ≈60%), small reversible capacity, and poor cycling stability. Here, it is demonstrated that by carefully designing the interface structure of SnO2 -Mo, a breakthrough comprehensive performance with ultrahigh average ICE of 92.6%, large capacity of 1067 mA h g-1 , and 100% capacity retention after 700 cycles can be realized in a multilayer Mo/SnO2 /Mo electrode. Furthermore, high capacity retentions are also achieved in pouch-type Mo/SnO2 /Mo||Li half cells and Mo/SnO2 /Mo||LiFePO4 full cells. The amorphous SnO2 /Mo interfaces, which are induced by redistribution of oxygen between SnO2 and Mo, can precisely adjust the reversible capacity and cycling stability of the multilayers, while the stable capacities are parabolic with the interfacial density. Theoretical calculations and in/ex situ investigation reveal that oxygen redistribution in SnO2 /Mo heterointerfaces boosts Li-ion transport kinetics by inducing a built-in electric field and improves the reaction reversibility of SnO2 . This work provides a new understanding of interface-performance relationship of metal-oxide hybrid electrodes and pivotal guidance for creating high-performance Li-ion batteries.
RESUMEN
The formation of oxygen vacancies could affect various properties of oxides. Herein we have investigated the formation energies of an oxygen vacancy (VO) with the relevant charge states in bulk Pnma-Li2FeSiO4 using first-principles calculations. The formation energies of the VO are essentially dependent on the atomic chemical potentials that represent the experimental conditions. The calculated formation energies of an oxygen vacancy in different charge states indicate that it would be energetically favorable to fully ionize the oxygen vacancy in Li2FeSiO4. The presence of VO is accompanied by a distinct redistribution of the electronic charge densities only around the Fe and Si ions next to the O-vacancy site, which shows a very local influence on the host material arising from VO. This local characteristic is also confirmed by the calculated partial densities of states (PDOS). We also studied the influence of substitutional (MnFe and CoFe) and cation vacancy defects (i.e., VFe and VLi) in the vicinity of an O-vacancy on the formation of an O-vacancy, respectively. We find that the calculated interaction energies between these defects and the oxygen vacancy are all negative, which implies that the formation of an oxygen vacancy becomes easier when the above defects are introduced. Compared to the substitutional defects, the interaction energies between the vacancy defects and the oxygen vacancy are significantly larger. Among them, the interaction energy between VFe and VO is the largest.
RESUMEN
Layered transition metal oxides are the most important cathode materials for Li/Na/K ion batteries. Suppressing undesirable phase transformations during charge-discharge processes is a critical and fundamental challenge towards the rational design of high-performance layered oxide cathodes. Here we report a shale-like NaxMnO2 (S-NMO) electrode that is derived from a simple but effective water-mediated strategy. This strategy expands the Na+ layer spacings of P2-type Na0.67MnO2 and transforms the particles into accordion-like morphology. Therefore, the S-NMO electrode exhibits improved Na+ mobility and near-zero-strain property during charge-discharge processes, which leads to outstanding rate capability (100 mAh g-1 at the operation time of 6 min) and cycling stability (>3000 cycles). In addition, the water-mediated strategy is feasible to other layered sodium oxides and the obtained S-NMO electrode has an excellent tolerance to humidity. This work demonstrates that engineering the spacings of alkali-metal layer is an effective strategy to stabilize the structure of layered transition metal oxides.
RESUMEN
Two-dimensional (2D) B-C compounds possess rich allotropic structures with many applications. Obtaining new 2D B4C3 structures is highly desirable due to the novel applications of three-dimensional (3D) B4C3 in protections. In this work, we proposed a new family of 2D B4C3 from the first-principles calculations. Distinct from previous observations, this family of 2D B4C3 consists of bonded 2D B4C3 bilayers. Six different types of bilayers with distinct bonded structures are found. The phonon spectrum calculations and ab initio molecular dynamics simulations at room temperature demonstrate their dynamic and thermal stabilities. Low formation energies suggest the high possibility of realizing such structures in experiments. Rich electronic structures are found, and the predicted Young's moduli are even higher than those of the previous ones. It is revealed that the unique electronic and mechanical properties are rooted in the bonding structures, indicating the prompting applications of this family of 2D B4C3 materials in photovoltaics, nanoelectronics, and nanomechanics.
RESUMEN
One-dimensional (1D) selenium and tellurium crystalize in helical chainlike structures and thus exhibit fascinating properties. By performing first-principles calculations, we have researched the linear and nonlinear optical (NLO) properties of 1D Se and Te, and find that both systems exhibit pronounced NLO responses. In particular, 1D Se is found to possess a large second-harmonic generation coefficient with the χ value being up to 7 times larger than that of GaN, and is even several times larger than that of the bulk counterpart. On the other hand, 1D Te also produces significant NLO susceptibility χ which exceeds that of bulk GaN by 5 times. Furthermore, 1D Te is shown to possess a prominent linear electro-optic coefficient rxxx(0). In particular, the Te chain exhibits a large shift current response and the maximum is twice as large as the maximal photovoltaic responses obtained from BaTiO3. Therefore, 1D Se and Te may find potential applications in solar energy conversion, electro-optical switches, and so on. Finally, the much stronger NLO effects of 1D Se and Te are attributed to their one-dimensional structures with high anisotropy, strong covalent bonding and lone-pair electrons. These findings will contribute further to experimental studies and the search for excellent materials with large NLO effects.
RESUMEN
Li2MnO3 is a critical member of the Li-rich Mn-based layered material. To understand the process of electrochemical reaction in the monoclinic Li2MnO3, the structural evolution is investigated through the first-principles calculations based on density functional theory. During the delithiation process, a phase transformation together with a new trigonal phase at x = 0.5 (LixMnO3) has been reported, which belongs to the space group P3[combining macron]1m. Lithium ions are embedded in Li0.5MnO3 until the trigonal Li2MnO3 phase is formed with the P3[combining macron]1m symmetry preserved. Phonon and molecular dynamics simulations verify that this trigonal Li2MnO3 is dynamically and thermodynamicaly stable. Furthermore, our calculated results reveal that it has high conductivity of 0.36 S cm-1 in the ab plane, which proves that this trigonal Li2MnO3 is a promising lithium superionic conductor.
RESUMEN
In this work, Li-rich Li1.2Mn0.43+Mnx4+Ti0.4-xO2 (LMMxTO, 0 ≤ x ≤ 0.4) oxides have been studied for the first time. X-ray diffraction (XRD) patterns show a cation-disordered rocksalt structure when x ranges from 0 to 0.2. After Mn4+ substitution, LMM0.2TO delivers a high specific capacity of 322 mAh g-1 at room temperature (30 °C, 30 mA g-1) and even 352 mAh g-1 (45 °C, 30 mA g-1) with an energy density of 1041 Wh kg-1. The reason for such a high capacity of LMM0.2TO is ascribed to the increase of both cationic (Mn) and anionic (O) redox after Mn4+ substitution, which is proved by dQ/dV curves, X-ray absorption near edge structure, DFT calculations, and in situ XRD results. In addition, the roles of Mn3+ and Ti4+ in LMM0.2TO are also discussed in detail. A ternary phase diagram is established to comprehend and further optimize the earth-abundant Mn3+-Mn4+-Ti4+ system. This work gives an innovative strategy to improve the energy density, broadening the ideas of designing Li-rich materials with better performance.
RESUMEN
Due to the high cost and insufficient resources of lithium, alternative sodium-ion batteries have been widely investigated for large-scale applications. NaFePO4 has the highest theoretical capacity of 154 mA h g-1 among the iron-based phosphates, which makes it an attractive cathode material for Na-ion batteries. Experimentally, LiFePO4 has been highly successful as a cathode material in Li-ion batteries because its olivine crystal structure provides a stable framework during battery cycling. In NaFePO4, maricite replaces olivine as the most stable phase. However, the maricite phase is experimentally found to be electrochemically inactive under normal battery operating voltages (0-4.5 V). We found that partial substitutions of Na with Li stabilize the olivine structure and may be a way to improve the performance of NaFePO4 cathodes. Using the previously developed structural LiFePO4 database, we examined the low-energy crystal structures in the system when we replace Li with Na. The known maricite and olivine NaFePO4 phases are reconfirmed and an unreported phase with energy between them is identified by our calculations. Besides, the Li-doped olivine type compound LixNa1-xFePO4 with mixed alkali ions retains better energetic stability compared with the other two types of structures of the same composition, as long as the proportion of Li exceeds 0.25. The thermodynamic stability of o-type LixNa1-xFePO4 can be further improved at finite temperatures. The primary limitation of the calculations is that we mainly focus on the zero-temperature condition; however, the relative stability of the structures may vary depending on the ambient temperature.