CO2 Stress-Driven Room Temperature Ferromagnetism of Ultrathin 2D Gallium Oxide.

Spintronic devices work by manipulating the spin of electrons other than charge transfer, which is of revolutionary significance and can largely reduce energy consumption in the future. Herein, ultrathin two-dimensional (2D) non-van der Waals (non-vdW) γ-Ga2O3 with room temperature ferromagnetism is successfully obtained by using supercritical CO2 (SC CO2). The stress effect of SC CO2 under different pressures selectively modulates the orientation and strength of covalent bonds, leading to the change of atomic structure including lattice expansion, introduction of O vacancy, and transition of Ga-O coordination (GaO4 and GaO6). Magnetic measurements show that pristine γ-Ga2O3 is nonferromagnetic, whereas the SC CO2 treated γ-Ga2O3 exhibits obvious ferromagnetic behavior with an optimal magnetization of 0.025 emu g-1 and a Curie temperature of 300 K.

Tunable Chirality-Dependent Nonlinear Electrical Responses in 2D Tellurium.

Tellurium (Te) is an elemental semiconductor with a simple chiral crystal structure. Te in a two-dimensional (2D) form synthesized by a solution-based method shows excellent electrical, optical, and thermal properties. In this work, the chirality of hydrothermally grown 2D Te is identified and analyzed by hot sulfuric acid etching and high-angle tilted high-resolution scanning transmission electron microscopy. The gate-tunable nonlinear electrical responses, including the nonreciprocal electrical transport in the longitudinal direction and the nonlinear planar Hall effect in the transverse direction, are observed in 2D Te under a magnetic field. Moreover, the nonlinear electrical responses have opposite signs in left- and right-handed 2D Te due to the opposite spin polarizations ensured by the chiral symmetry. The fundamental relationship between the spin-orbit coupling and the crystal symmetry in two enantiomers provides a viable platform for realizing chirality-based electronic devices by introducing the degree of freedom of chirality into electron transport.

Comparative floral development in male and female plants of Palmer amaranth (Amaranthus palmeri).

PREMISE: Characterizing the developmental processes in the transition from hermaphroditism to unisexuality is crucial for understanding floral evolution. Amaranthus palmeri, one of the most devastating weeds in the United States, is an emerging model system for studying a dioecious breeding system and understanding the biological traits of this invasive weed. The objectives of this study were to characterize phases of flower development in A. palmeri and compare organogenesis of flower development in female and male plants. METHODS: Flower buds from male and female plants were dissected for light microscopy. Segments of male and female inflorescences at different stages of development were cut longitudinally and visualized using scanning electron microscopy. RESULTS: Pistillate flowers have two to three styles, one ovary with one ovule, and five obtuse tepals. Staminate flowers have five stamens with five acute tepals. Floral development was classified into 10 stages. The distinction between the two flower types became apparent at stage four by the formation of stamen primordia in staminate flowers, which developed female and male reproductive organs initially, as contrasted to pistillate flowers, which produced carpel primordia only. In staminate flowers, the putative carpel primordia changed little in size and remained undeveloped. CONCLUSIONS: Timing of inappropriate organ termination varies across the two sexes in A. palmeri. Our study suggests that the evolution of A. palmeri from a cosexual ancestral state to complete dioecy is still in progress since males exhibited transient hermaphroditism and females produced strictly pistillate flowers.

FLUXestimator: a webserver for predicting metabolic flux and variations using transcriptomics data.

Quantitative assessment of single cell fluxome is critical for understanding the metabolic heterogeneity in diseases. Unfortunately, laboratory-based single cell fluxomics is currently impractical, and the current computational tools for flux estimation are not designed for single cell-level prediction. Given the well-established link between transcriptomic and metabolomic profiles, leveraging single cell transcriptomics data to predict single cell fluxome is not only feasible but also an urgent task. In this study, we present FLUXestimator, an online platform for predicting metabolic fluxome and variations using single cell or general transcriptomics data of large sample-size. The FLUXestimator webserver implements a recently developed unsupervised approach called single cell flux estimation analysis (scFEA), which uses a new neural network architecture to estimate reaction rates from transcriptomics data. To the best of our knowledge, FLUXestimator is the first web-based tool dedicated to predicting cell-/sample-wise metabolic flux and metabolite variations using transcriptomics data of human, mouse and 15 other common experimental organisms. The FLUXestimator webserver is available at http://scFLUX.org/, and stand-alone tools for local use are available at https://github.com/changwn/scFEA. Our tool provides a new avenue for studying metabolic heterogeneity in diseases and has the potential to facilitate the development of new therapeutic strategies.

Tunable Circular Photogalvanic and Photovoltaic Effect in 2D Tellurium with Different Chirality.

Chirality arises from the asymmetry of materials, where two counterparts are the mirror image of each other. The interaction between circular-polarized light and quantum materials is enhanced in chiral space groups due to the structural chirality. Tellurium (Te) possesses the simplest chiral crystal structure, with Te atoms covalently bonded into a spiral atomic chain (left- or right-handed) with a periodicity of 3. Here, we investigate the tunable circular photoelectric responses in 2D Te field-effect transistors with different chirality, including the longitudinal circular photogalvanic effect induced by the radial spin texture (electron-spin polarization parallel to the electron momentum direction) and the circular photovoltaic effect induced by the chiral crystal structure (helical Te atomic chains). Our work demonstrates the controllable manipulation of the chirality degree of freedom in materials.

Wearable chemical sensors based on 2D materials for healthcare applications.

Chemical sensors worn on the body could make possible the continuous, noninvasive, and accurate monitoring of vital human signals, which is necessary for remote health monitoring and telemedicine. Attractive for creating high-performance, wearable chemical sensors are atomically thin materials with intriguing physical features, abundant chemistry, and high surface-to-volume ratios. These advantages allow for appropriate material-analyte interactions, resulting in a high level of sensitivity even at trace analyte concentrations. Previous review articles covered the material and device elements of 2D material-based wearable devices extensively. In contrast, little research has addressed the existing state, future outlook, and promise of 2D materials for wearable chemical sensors. We provide an overview of recent advances in 2D-material-based wearable chemical sensors to overcome this deficiency. The structure design, manufacturing techniques, and mechanisms of 2D material-based wearable chemical sensors will be evaluated, as well as their applicability in human health monitoring. Importantly, we present a thorough review of the current state of the art and the technological gaps that would enable the future design and nanomanufacturing of 2D materials and wearable chemical sensors. Finally, we explore the challenges and opportunities associated with designing and implementing 2D wearable chemical sensors.

Characterization of the synergistic inhibitory effect of cyanidin-3-O-glucoside and catechin on pancreatic lipase.

This study aimed to identify novel pancreatic lipase (PL) inhibitors using affinity ultrafiltration combined with spectroscopy and molecular docking. Cyanidin-3-O-glucoside (C3G; IC50: 0.268 mg/mL) and catechin (IC50: 0.280 mg/mL) were shown to be potent PL inhibitors extracted from black rice and adzuki bean coat extracts. Isobologram analysis revealed that the combined use of C3G and catechin at a ratio of 2:3 had a remarkable synergistic effect (IC50 of the mixture: 0.201 mg/mL). The inhibitory mechanism of C3G-catechin mixture was of mixed type. The C3G-catechin mixture had a great impact on PL secondary structures. Molecular docking analysis further demonstrated that these polyphenols formed hydrophobic interactions and hydrogen bonds with amino acid residues in the binding pocket of PL. Collectively, C3G and catechin were shown to inhibit PL in a synergistic manner and can be potentially used for the development of food supplements for obesity prevention.

Enhanced Performance of Triboelectric Nanogenerators and Sensors via Cold Spray Particle Deposition.

In this study, a high-performance triboelectric nanogenerator (TENG) is developed based on cold spray (CS) deposition of composite material layers. Composite layers were fabricated by cold spraying of micron-scale tin (Sn) particles on aluminum (Al) and polytetrafluoroethylene (PTFE) films, which led to improved TENG performance owing to functionalized composite layers as friction layers and electrodes, respectively. As-sprayed tin composite layers not only enhanced the flow of charges by strong adhesion to the target layer but also formed a nano-microstructure on the surface of the layers, thereby increasing the surface area during friction. More importantly, the electricity generation performance was improved more than 6 times as compared to the TENG without CS deposition on it. From parametric studies, the TENG using the cold-sprayed composite layer produced an electrical potential of 1140 V for a simple structure with a 25.4 × 25.4 mm2 contact area. We also optimize the geometry and fabrication process of the TENG to increase the manufacturing efficiency while reducing the processing cost. The resultant sprayed layers and structures exhibited sustainable robustness by showing consistent electrical performance after the mechanical adhesion test. The proposed manufacturing approach is also applicable for processing three-dimensional (3D) complex layers owing to the technological convergence of a cold spray gun attached to a robotic arm, which makes possible to fabricate the 3D TENG. To elaborate, a composite layer having the shape of a 3D ball is produced, and the exercise status of the ball is monitored in real-time. The fabricated 3D ball using the TENG transmitted a distinguishable signal in real-time according to the state of the ball. The proposed TENG sensing system can be utilized as a self-powered sensor without the need of a battery, amplifier, and rectifier. The results of this study can potentially provide insights for the practical material design and fabrication of self-powered TENG systems.

Green Innovation, Corporate Environmental Ethics, and Competitive Advantages of Chinese Automobile Industry During COVID-19: Corporate Environmental Management as Moderator.

Objective: The main purpose of this study is to investigate the impact of green product and process innovation on the competitive advantages of the Chinese automobile industry during coronavirus disease 2019 (COVID-19). This study also examined the mediating role of corporate environmental ethics (CEE) and the moderating role of corporate environmental management in the relationship between the green product and process innovation on the competitive advantages of the Chinese automobile industry during COVID-19. Methods: This study used a quantitative approach of research with the cross-sectional method for the collection of data. This study also used purposive sampling for the collection of data from the production managers of the automobile industry of China. The structural equation modeling-partial least squares (SEM-PLS) is used to analyze the data. Results: The results of direct effects indicated that green product innovation has a significant and positive effect on the corporate advantages (ß = 0.294, t = 2.868) and green process innovation also has a significant and positive effect on the corporate advantages (ß = 0.350, t = 3.276). Moreover, green product innovation has also a significant effect on corporate advantages (ß = 0.334, t = 4.258) and green product innovation has also a significant effect on corporate advantages (ß = 0.269, t = 3.202). Significance: The research in this domain about the antecedents of green innovation is still minimal in the previous literature. One of the antecedents of the green innovation, corporate environmental ethics is discussed in this study; thus, it provides the understanding of green innovation as the mediator which would mediate the relationship between corporate environmental ethics and competitive advantage in the auto manufacturing industry of China. Novelty: This study is among very few to examine the relationship between green innovation, corporate environmental ethics, corporate environmental management, and competitive advantages of the Chinese automobile industry during COVID-19.

High-Performance Piezo-Electrocatalytic Sensing of Ascorbic Acid with Nanostructured Wurtzite Zinc Oxide.

Nanostructured piezoelectric semiconductors offer unprecedented opportunities for high-performance sensing in numerous catalytic processes of biomedical, pharmaceutical, and agricultural interests, leveraging piezocatalysis that enhances the catalytic efficiency with the strain-induced piezoelectric field. Here, a cost-efficient, high-performance piezo-electrocatalytic sensor for detecting l-ascorbic acid (AA), a critical chemical for many organisms, metabolic processes, and medical treatments, is designed and demonstrated. Zinc oxide (ZnO) nanorods and nanosheets are prepared to characterize and compare their efficacy for the piezo-electrocatalysis of AA. The electrocatalytic efficacy of AA is significantly boosted by the piezoelectric polarization induced in the nanostructured semiconducting ZnO catalysts. The charge transfer between the strained ZnO nanostructures and AA is elucidated to reveal the mechanism for the related piezo-electrocatalytic process. The low-temperature synthesis of high-quality ZnO nanostructures allows low-cost, scalable production, and integration directly into wearable electrocatalytic sensors whose performance can be boosted by otherwise wasted mechanical energy from the working environment, for example, human-generated mechanical signals.

Enhancement of patterned triboelectric output performance by an interfacial polymer layer for energy harvesting application.

Efficaciously scavenging waste mechanical energy from the environment is an emerging field in the self-powered and self-governing electronics systems which solves battery limitations. It demonstrates enormous potential in various fields such as wireless devices, vesture, and portable electronic devices. Different surface textured PET triboelectric nanogenerators (TENGs) were developed by the laser pattern method in the previous work, with the line textured TENG device showing improved performance due to a larger surface contact area. Here, a polyethylene oxide (PEO) and polyvinyl alcohol (PVA) coated line patterned PET-based TENG was developed for the conversion of mechanical energy into useful electric energy. The PEO layer boosted the TENG output to 4 times higher than that of the PA6-laser patterned PET TENG device (our previous report) and 2-fold higher than that of a pristine line patterned TENG. It generated an open-circuit voltage, short circuit current, and instantaneous power density of 131 V, 2.32 µA, and 41.6 µW cm-2, respectively. The as-fabricated device was tested for 10 000 cycles for reliability evaluation, which shows no significant performance degradation. In addition, the device was deployed to power 10 LEDs with high intensity. Thus, this device can be used for ambient mechanical energy conversion and to power micro and nano-electronic devices.

Magnetically Aligned Ultrafine Cobalt Embedded 3D Porous Carbon Metamaterial by One-Step Ultrafast Laser Direct Writing.

Spatial manipulation of nanoparticles (NPs) in a controlled manner is critical for the fabrication of 3D hybrid materials with unique functions. However, traditional fabrication methods such as electron-beam lithography and stereolithography are usually costly and time-consuming, precluding their production on a large scale. Herein, for the first time the ultrafast laser direct writing is combined with external magnetic field (MF) to massively produce graphene-coated ultrafine cobalt nanoparticles supported on 3D porous carbon using metal-organic framework crystals as precursors (5 × 5 cm2 with 10 s). The MF-confined picosecond laser scribing not only reduces the metal ions rapidly but also aligns the NPs in ultrafine and evenly distributed order (from 7.82 ± 2.37 to 3.80 ± 0.84 nm). ≈400% increment of N-Q species within N compositionis also found as the result of the special MF-induced laser plasma plume. (). The importance of MF is further exmined by electrochemical water-splitting tests. Significant overpotential improvements of 90 and 150 mV for oxygen evolution reaction and hydrogen evolution reaction are observed, respectively, owing to the MF-induced alignment of the NPs and controlled elemental compositions. This work provides a general bottom-up approach for the synthesis of metamaterials with high outputs yet a simple setup.

Emerging beyond-graphene elemental 2D materials for energy and catalysis applications.

Elemental two-dimensional (2D) materials have emerged as promising candidates for energy and catalysis applications due to their unique physical, chemical, and electronic properties. These materials are advantageous in offering massive surface-to-volume ratios, favorable transport properties, intriguing physicochemical properties, and confinement effects resulting from the 2D ultrathin structure. In this review, we focus on the recent advances in emerging energy and catalysis applications based on beyond-graphene elemental 2D materials. First, we briefly introduce the general classification, structure, and properties of elemental 2D materials and the new advances in material preparation. We then discuss various applications in energy harvesting and storage, including solar cells, piezoelectric and triboelectric nanogenerators, thermoelectric devices, batteries, and supercapacitors. We further discuss the explorations of beyond-graphene elemental 2D materials for electrocatalysis, photocatalysis, and heterogeneous catalysis. Finally, the challenges and perspectives for the future development of elemental 2D materials in energy and catalysis are discussed.

Bilayer Quantum Hall States in an n-Type Wide Tellurium Quantum Well.

Tellurium (Te) is a narrow bandgap semiconductor with a unique chiral crystal structure. The topological nature of electrons in the Te conduction band can be studied by realizing n-type doping using atomic layer deposition (ALD) technique on two-dimensional (2D) Te film. In this work, we fabricated and measured the double-gated n-type Te Hall-bar devices, which can operate as two separate or coupled electron layers controlled by the top gate and back gate. Profound Shubnikov-de Haas (SdH) oscillations are observed in both top and bottom electron layers. Landau level hybridization between two layers, compound and charge-transferable bilayer quantum Hall states at filling factor ν = 4, 6, and 8, are analyzed. Our work opens the door for the study of Weyl physics in coupled bilayer systems of 2D materials.

Atomic-layered Pt clusters on S-vacancy rich MoS2-x with high electrocatalytic hydrogen evolution.

Developing suitable supports to maximize the atomic utilization efficiency of platinum group metals is of great significance to hydrogen evolution from water splitting. Herein, we report a fully exposed Pt cluster supported on an S-vacancy rich MoS2-x support (Pt/Sv-MoS2-x) by a facile impregnation method. Pt/Sv-MoS2-x exhibits an outstanding electrochemical HER performance with a low overpotential of 26.6 mV at a current density of 10 mA cm-2, a small Tafel slope of 34.8 mV dec-1 and good durability. Most importantly, the mass activity of Pt is an order of magnitude more active than that of commercial Pt/C at an overpotential of 0.08 V. We attribute this exceptional HER catalytic performance to the fact that platinum and Sv-MoS2-x act in synergy to accelerate the reaction kinetics.

Amorphous-MoO3-x/MoS2 heterostructure: in situ oxidizing amorphization of S-vacancy MoS2 for enhanced alkaline hydrogen evolution.

Cost-effective and durable electrocatalysts for the alkaline hydrogen evolution reaction (HER) are urgently required. The slow HER kinetics suppressed by water dissociation hinder the application of catalysts in alkaline media. Herein, we constructed an amorphous heterostructure that combined amorphous-MoO3-x (A-MoO3-x) and MoS2 by in situ oxidizing amorphization of S-vacancy MoS2. The optimal A-MoO3-x/MoS2 catalyst exhibited a competitive HER overpotential of -146 mV at η = -10 mA cm-2. DFT calculations indicate that A-MoO3-x can reduce the energy barriers of water dissociation and H2 formation, and the heterointerfaces can facilitate charge transfer.

Ultrafast photoinduced band splitting and carrier dynamics in chiral tellurium nanosheets.

Trigonal tellurium (Te) is a chiral semiconductor that lacks both mirror and inversion symmetries, resulting in complex band structures with Weyl crossings and unique spin textures. Detailed time-resolved polarized reflectance spectroscopy is used to investigate its band structure and carrier dynamics. The polarized transient spectra reveal optical transitions between the uppermost spin-split H4 and H5 and the degenerate H6 valence bands (VB) and the lowest degenerate H6 conduction band (CB) as well as a higher energy transition at the L-point. Surprisingly, the degeneracy of the H6 CB (a proposed Weyl node) is lifted and the spin-split VB gap is reduced upon photoexcitation before relaxing to equilibrium as the carriers decay. Using ab initio density functional theory (DFT) calculations, we conclude that the dynamic band structure is caused by a photoinduced shear strain in the Te film that breaks the screw symmetry of the crystal. The band-edge anisotropy is also reflected in the hot carrier decay rate, which is a factor of two slower along the c-axis than perpendicular to it. The majority of photoexcited carriers near the band-edge are seen to recombine within 30 ps while higher lying transitions observed near 1.2 eV appear to have substantially longer lifetimes, potentially due to contributions of intervalley processes in the recombination rate. These new findings shed light on the strong correlation between photoinduced carriers and electronic structure in anisotropic crystals, which opens a potential pathway for designing novel Te-based devices that take advantage of the topological structures as well as strong spin-related properties.

Quantum Hall effect of Weyl fermions in n-type semiconducting tellurene.

Dirac and Weyl nodal materials can host low-energy relativistic quasiparticles. Under strong magnetic fields, the topological properties of Dirac/Weyl materials can directly be observed through quantum Hall states. However, most Dirac/Weyl nodes generically exist in semimetals without exploitable band gaps due to their accidental band-crossing origin. Here, we report the first experimental observation of Weyl fermions in a semiconductor. Tellurene, the two-dimensional form of tellurium, possesses a chiral crystal structure which induces unconventional Weyl nodes with a hedgehog-like radial spin texture near the conduction band edge. We synthesize high-quality n-type tellurene by a hydrothermal method with subsequent dielectric doping and detect a topologically non-trivial π Berry phase in quantum Hall sequences. Our work expands the spectrum of Weyl matter into semiconductors and offers a new platform to design novel quantum devices by marrying the advantages of topological materials to versatile semiconductors.

Strain-Engineered Anisotropic Optical and Electrical Properties in 2D Chiral-Chain Tellurium.

Atomically thin materials, leveraging their low-dimensional geometries and superior mechanical properties, are amenable to exquisite strain manipulation with a broad tunability inaccessible to bulk or thin-film materials. Such capability offers unexplored possibilities for probing intriguing physics and materials science in the 2D limit as well as enabling unprecedented device applications. Here, the strain-engineered anisotropic optical and electrical properties in solution-grown, sub-millimeter-size 2D Te are systematically investigated through designing and introducing a controlled buckled geometry in its intriguing chiral-chain lattice. The observed Raman spectra reveal anisotropic lattice vibrations under the corresponding straining conditions. The feasibility of using buckled 2D Te for ultrastretchable strain sensors with a high gauge factor (≈380) is further explored. 2D Te is an emerging material boasting attractive characteristics for electronics, sensors, quantum devices, and optoelectronics. The results suggest the potential of 2D Te as a promising candidate for designing and implementing flexible and stretchable devices with strain-engineered functionalities.

Holistically Engineered Polymer-Polymer and Polymer-Ion Interactions in Biocompatible Polyvinyl Alcohol Blends for High-Performance Triboelectric Devices in Self-Powered Wearable Cardiovascular Monitorings.

The capability of sensor systems to efficiently scavenge their operational power from stray, weak environmental energies through sustainable pathways could enable viable schemes for self-powered health diagnostics and therapeutics. Triboelectric nanogenerators (TENG) can effectively transform the otherwise wasted environmental, mechanical energy into electrical power. Recent advances in TENGs have resulted in a significant boost in output performance. However, obstacles hindering the development of efficient triboelectric devices based on biocompatible materials continue to prevail. Being one of the most widely used polymers for biomedical applications, polyvinyl alcohol (PVA) presents exciting opportunities for biocompatible, wearable TENGs. Here, the holistic engineering and systematic characterization of the impact of molecular and ionic fillers on PVA blends' triboelectric performance is presented for the first time. Triboelectric devices built with optimized PVA-gelatin composite films exhibit stable and robust triboelectricity outputs. Such wearable devices can detect the imperceptible skin deformation induced by the human pulse and capture the cardiovascular information encoded in the pulse signals with high fidelity. The gained fundamental understanding and demonstrated capabilities enable the rational design and holistic engineering of novel materials for more capable biocompatible triboelectric devices that can continuously monitor vital physiological signals for self-powered health diagnostics and therapeutics.