Observation on Switching Properties of WO3-Based H2 Sensor Regulated by Temperature and Gas Concentration.

Transition metal oxide semiconductors have great potential for use in H2 sensors, but in recent years, the strange phenomena about gas-sensitive performance associated with their special properties have been more widely discussed in research. In some cases, the resistance of transition metal oxide gas sensors will emerge with some changes contrary to their intrinsic semiconductor characteristics, especially in gas sensor research of WO3. Based on the hydrothermal synthesis of WO3, our work focuses on the abnormal change of tungsten oxide resistance to different gases at low temperature (80-200 °C) and high temperature (above 200 °C). Through in situ FT-IR and in situ XPS, combined with density functional theory calculations, a new reasonable explanation of WO3 is proposed for the abnormal resistance change caused by temperature and the strange response due to gas concentration. The occurrence of these findings can be attributed to the synergistic effect resulting from the presence of two contributing factors. One of them is attributed to the alteration in the surface valence state of WO3 induced by gas, resulting in the reduction of W6+. The other one is due to the reaction between gas and adsorbed oxygen on the surface of WO3. This work presents a novel and rational concept for addressing the reaction mechanism between gas and transition metal oxide semiconductors, thereby paving the way for the development of highly efficient gas sensors based on transition metal oxide semiconductors.

Enhancing Energy Density in Aqueous Ammonium-Ion Supercapacitors via CuCo2S4@MoS2 Core@Shell Heterostructure Design.

Aqueous ammonium-ion supercapacitors (AASCs) are recognized for their rapid charge-discharge capability, long cycle life, and excellent power density. However, they still confront the challenges of low energy density. To address the above issue, this work proposes a novel strategy involving the establishment of CuCo2S4@MoS2 core@shell heterostructures to enhance the capacity of electrode material. The double electric layer energy storage mechanism of the MoS2 shell facilitates the storage and provision of a substantial ammonium source for NH4 + insertion into CuCo2S4, thereby enhancing the electrochemical performance of AASCs. The density functional theory (DFT) calculations demonstrate that the CuCo2S4@MoS2 core@shell heterostructures exhibit better affinity for NH4 + and improved conductivity. Furthermore, the internal electric field at the heterojunction accelerates NH4 + transfer, thereby enhancing the pseudocapacitive behavior of CuCo2S4. Owing to the abundant active sites and pronounced pseudo-capacitance, the CuCo2S4@MoS2 electrode achieves a specific capacity of 2045 C g-1 at 1 A g-1. With activated carbon (AC) as the negative electrode, the fabricated CuCo2S4@MoS2//AC AASC device attains a specific capacity of 591 C g-1 and an energy density of 83.23 Wh kg-1. This work presents a promising new strategy for the next generation of AASCs.

Unraveling the Effect of Oxygen Vacancy on WO3 Surface for Efficient NO2 Detection at Low Temperature.

Oxygen vacancies (VO) in metal oxide semiconductors play an important role in improving gas-sensing performance of chemiresistive gas sensors. Nonetheless, there is still a lack of clear understanding of the inherent mechanism of the influence of oxygen vacancies on gas sensing due to generally focusing on the concentration of VO. Herein, oxygen vacancies were rationally modulated in WO3 nanoflower structures via an annealing process, resulting in a transformation of VO from neutral (VO0) to a doubly ionized (VO2+) state. Density functional theory (DFT) calculations indicate that VO2+ is significantly more efficient than VO0 for NO2 detection in competition with atmospheric O2. Benefiting from a high concentration of VO2+, the WO3-450 (WO3 annealed at 450 °C) sensor exhibits excellent sensing performance with an ultrahigh sensitivity (3674.1 to 5 ppm NO2), superior selectivity, and long-term stability (one month). Furthermore, the sensor with the wide range of concentration detection not only can detect NO2 gas with parts per million (ppm) but also can detect NO2 with parts per billion (ppb) level concentration, with a high sensibility reaching 2.8 to 25 ppb NO2 and over 100 to 100 ppb NO2. This study elucidates the oxygen vacancy mediated sensing mechanism toward NO2 and provides an effective strategy for the rational design of gas sensors with high sensing performance.

Optimizing Surface State Electrons of Topological Semi-Metal by Atomic Doping for Enhanced Hydrogen Evolution Reaction.

Topological materials carrying topological surface states (TSSs) have extraordinary carrier mobility and robustness, which provide a new platform for searching for efficient hydrogen evolution reaction (HER) electrocatalysts. However, the majority of these TSSs originate from the sp band of topological quantum catalysts rather than the d band. Here, based on the density functional theory calculation, it is reported a topological semimetal Pd3Sn carrying TSSs mainly derived from d orbital and proposed that optimizing surface state electrons of Pd3Sn by introduction heteroatoms (Ni) can promote hybridization between hydrogen atoms and electrons, thereby reducing the Gibbs free energy (ΔGH) of adsorbed hydrogen and improving its HER performance. Moreover, this is well verified by electrocatalytic experiment results, the Ni-doped Pd3Sn (Ni0.1Pd2.9Sn) show much lower overpotential (-29 mV vs RHE) and Tafel slope (17 mV dec-1) than Pd3Sn (-39 mV vs RHE, 25 mV dec-1) at a current density of 10 mA cm-2. Significantly, the Ni0.1Pd2.9Sn nanoparticles exhibit excellent stability for HER. The electrocatalytic activity of Ni0.1Pd2.9Sn nanoparticles is superior to that of commercial Pt. This work provides an accurate guide for manipulating surface state electrons to improve the HER performance of catalysts.

In Situ Fabrication of Hierarchical CuO@CoNi-LDH Composite Structures for High-Performance Supercapacitors.

Layered double hydroxide (LDH) materials, despite their high theoretical capacity, exhibit significant performance degradation with increasing load due to their low conductivity. Simultaneously achieving both high capacity and high rate performance is challenging. Herein, we fabricated vertically aligned CuO nanowires in situ on the copper foam (CF) substrate by alkali-etching combined with the annealing process. Using this as a skeleton, electrochemical deposition technology was used to grow the amorphous α-phase CoNi-LDH nanosheets on its surface. Thanks to the high specific surface area of the CuO skeleton, ultrahigh loading (̃16.36 mg cm-2) was obtained in the fabricated CF/CuO@CoNi-LDH electrode with the cactus-like hierarchical structure, which enhanced the charge transfer and ion diffusion dynamics. The CF/CuO@CoNi-LDH electrode achieved a good combination of high areal capacitance (33.5 F cm-2) and high rate performance (61% capacitance retention as the current density increases 50 times). The assembled asymmetric supercapacitor device demonstrated a maximum potential window of 0-1.6 V and an energy density of 1.7 mWh cm-2 at a power density of 4 mW cm-2. This work provides a feasible strategy for the design and fabrication of high-mass-loading LDH composites for electrochemical energy storage applications.

Intercalation chemistry engineering strategy enabled high mass loading and ultrastable electrodes for High-Performance aqueous electrochemical energy storage devices.

Aqueous electrochemical energy storage devices (AEESDs) are considered one of the most promising candidates for large-scale energy storage infrastructure due to their high affordability and safety. Developing electrodes with the merits of high energy density and long lifespan remains a challenging issue toward the practical application of AEESDs. Research attempts at electrode materials, nanostructure configuration, and electronic engineering show the limitations due to the inherent contradictions associated with thicker electrodes and ion-accessible kinetics. Herein, we propose an intercalation chemistry engineering strategy to enhance the electrolyte ion (de)intercalation behaviors during the electrochemical charge-discharge. To validate this strategy, the prototypical model of a high-mass-loading MnO2-based electrode is used with controlled intercalation of Na+ and H2O. Theoretical and experimental results reveal that an optimal content of Na+ and H2O on the MnO2-based electrode exhibits superior electrochemical performance. Typically, the resultant electrode exhibits an impressive areal capacitance of 1551 mF/cm2 with a mass loading of 9.7 mg/cm2 (at 1 mA/cm2). Furthermore, the assembled full-cell with obtained MnO2-based electrode delivers a high energy density of 0.12 mWh/cm2 (at 20.02 mW/cm2) and ultra-high cycling stability with a capacitance retention percentage of 89.63 % (345 mF/cm2) even after 100,000 cycles (tested over 72 days).

Boosting Charge Transport and Catalytic Performance in MoS2 by Zn2+ Intercalation Engineering for Lithium-Sulfur Batteries.

Transition metal dichalcogenides (TMDs) have been widely studied as catalysts for lithium-sulfur batteries due to their good catalytic properties. However, their poor electronic conductivity leads to slow sulfur reduction reactions. Herein, a simple Zn2+ intercalation strategy was proposed to promote the phase transition from semiconducting 2H-phase to metallic 1T-phase of MoS2. Furthermore, the Zn2+ between layers can expand the interlayer spacing of MoS2 and serve as a charge transfer bridge to promote longitudinal transport along the c-axis of electrons. DFT calculations further prove that Zn-MoS2 possesses better charge transfer ability and stronger adsorption capacity. At the same time, Zn-MoS2 exhibits excellent redox electrocatalytic performance for the conversion and decomposition of polysulfides. As expected, the lithium-sulfur battery using Zn0.12MoS2-carbon nanofibers (CNFs) as the cathode has high specific capacity (1325 mAh g-1 at 0.1 C), excellent rate performance (698 mAh g-1 at 3 C), and outstanding cycle performance (it remains 604 mAh g-1 after 700 cycles with a decay rate of 0.045% per cycle). This study provides valuable insights for improving electrocatalytic performance of lithium-sulfur batteries.

Boosting Polysulfide Redox Kinetics by Temperature-Induced Metal-Insulator Transition Effect of Tungsten-Doped Vanadium Dioxide for High-Temperature Lithium-Sulfur Batteries.

The practical application of Li-S batteries is still severely restricted by poor cyclic performance caused by the intrinsic polysulfides shuttle effect, which is even more severe under the high-temperature condition owing to the inevitable increase of polysulfides' solubility and diffusion rate. Herein, tungsten-doped vanadium dioxide (W-VO2) micro-flowers are employed with first-order metal-insulator phase transition (MIT) property as a robust and multifunctional modification layer to hamper the shuttle effect and simultaneously improve the thermotolerance of the common separator. Tungsten doping significantly reduces the transition temperature from 68 to 35 °C of vanadium dioxide, which renders the W-VO2 easier to turn from the insulating monoclinic phase into the metallic rutile phase. The systematic experiments and theoretical analysis demonstrate that the temperature-induced in-suit MIT property endows the W-VO2 catalyst with strong chemisorption against polysulfides, low energy barrier for liquid-to-solid conversion, and outstanding diffusion kinetics of Li-ion under high temperatures. Benefiting from these advantages, the Li-S batteries with W-VO2 modified separator exhibit significantly improved rate and long-term cyclic performance under 50 °C. Remarkably, even at an elevated temperature (80 °C), they still exhibit superior electrochemical performance. This work opens a rewarding avenue to use phase-changing materials for high-temperature Li-S batteries.

Interlayer and Phase Engineering Modifications of K-MoS2@C Nanoflowers for High-Performance Degradable Zn-Ion Batteries.

2D transition metal dichalcogenides (TMDs) have garnered significant interest as cathode materials for aqueous zinc-ion batteries (AZIBs) due to their open transport channels and abundant Zn2+ intercalation sites. However, unmodified TMDs exhibit low electrochemical activity and poor kinetics owing to the high binding energy and large hydration radius of divalent Zn2+. To overcome these limitations, an interlayer engineering strategy is proposed where K+ is preintercalated into K-MoS2 nanosheets, which then undergo in situ growth on carbon nanospheres (denoted as K-MoS2@C nanoflowers). This strategy stimulates in-plane redox-active sites, expands the interlayer spacing (from 6.16 to 9.42 Å), and induces the formation of abundant MoS2 1T-phase. The K-MoS2@C cathode demonstrates excellent redox activity and fast kinetics, attributed to the potassium ions acting as a structural "stabilizer" and an electrostatic interaction "shield," accelerating charge transfer, promoting Zn2+ diffusion, and ensuring structural stability. Meanwhile, the carbon nanospheres serve as a 3D conductive network for Zn2+ and enhance the cathode's hydrophilicity. More significantly, the outstanding electrochemical performance of K-MoS2@C, along with its superior biocompatibility and degradability of its related components, can enable an implantable energy supply, providing novel opportunities for the application of transient electronics.

A soft implantable energy supply system that integrates wireless charging and biodegradable Zn-ion hybrid supercapacitors.

The advent of implantable bioelectronic devices offers prospective solutions toward health monitoring and disease diagnosis and treatments. However, advances in power modules have lagged far behind the tissue-integrated sensor nodes and circuit units. Here, we report a soft implantable power system that monolithically integrates wireless energy transmission and storage modules. The energy storage unit comprises biodegradable Zn-ion hybrid supercapacitors that use molybdenum sulfide (MoS2) nanosheets as cathode, ion-crosslinked alginate gel as electrolyte, and zinc foil as anode, achieving high capacitance (93.5 mF cm-2) and output voltage (1.3 V). Systematic investigations have been conducted to elucidate the charge storage mechanism of the supercapacitor and to assess the biodegradability and biocompatibility of the materials. Furthermore, the wirelessly transmitted energy can not only supply power directly to applications but also charge supercapacitors to ensure a constant, reliable power output. Its power supply capabilities have also been successfully demonstrated for controlled drug delivery.

Three-Dimensional Polypyrrole-Decorated CuCo2S4 Nanowires Anchored on Nickel Foam: A Promising Electrode for High-Performance Supercapacitors.

The exploitation of high-performance supercapacitors is crucial to promote energy storage technologies. Benefiting from the three-dimensional conductive micronanostructures and high specific capacity of the PPy@CuCo2S4@NF (polypyrrole/copper cobalt sulfide/nickel foam) composite electrode, this electrode exhibits a high specific capacity of 1403.21 C g-1 at 1 A g-1 and a capacitance retention of 85.79% after 10,000 cycles at 10 A g-1. The assembled PPy@CuCo2S4@NF//AC aqueous hybrid supercapacitor (AHSC) reveals a wide operating potential window of 1.5 V and achieves a high specific capacity of 322.52 C g-1 at 1 A g-1 and a capacitance retention of 86.84% after 15,000 cycles at 10 A g-1. The AHSC also exhibits a high power density of 733.69 W kg-1 at an energy density of 67.19 W h kg-1, surpassing those of previously reported spinel-based supercapacitors. Ex situ X-ray diffraction and X-ray photoelectron spectroscopy results show that the CuCo2S4 spinel structure changes to CuS2 and CoS2 cube structures, and the oxidation states of Cu and Co increase during charging and discharging processes. Density functional theory calculations suggest a superior conductivity for CuCo2S4 compared to that for CuCo2O4, demonstrating that CuCo2S4 has superior electrochemical performance. These findings attest to the considerable potential of the spinel materials for advanced energy storage applications.

Manipulating Sulfur Conversion Kinetics through Interfacial Built-In Electric Field Enhanced Bidirectional Mott-Schottky Electrocatalysts in Lithium-Sulfur Batteries.

Efficient electrocatalysts and catalytic mechanisms remain a pressing need in Li-S electrochemistry to address lithium polysulfide (LiPS) shuttling and enhance conversion kinetics. This study presents the development of multifunctional VO2@rGO heterostructures, incorporating interfacial built-in electric field (BIEF) enhancement, as a Mott-Schottky electrocatalyst for Li-S batteries. Electrochemical experiments and theoretical analysis demonstrate that the interfacial BIEF between VO2 and rGO induces self-driven charge redistribution, resulting in accelerated charge transport rates, enhanced LiPS chemisorption, reduced energy barriers for Li2S nucleation/decomposition, and improved Li-ion diffusion behavior. The Mott-Schottky electrocatalyst, combining the strengths of VO2's anchoring ability, rGO's metallic conductivity, and BIEF's optimized charge transport, exhibits an outstanding "trapping-conversion" effect. The modified Li-S battery with a VO2@rGO-modified separator achieves a highly reversible capacity of 558.0 mAh g-1 at 2 C over 600 cycles, with an average decay rate of 0.048% per cycle. This research offers valuable insights into the design of Mott-Schottky electrocatalysts and their catalytic mechanisms, advancing high-efficiency Li-S batteries and other multielectron energy storage and conversion devices.

Ferroelectric-Enhanced cathode kinetics toward High-Performance aqueous Zinc-Ion batteries.

Rechargeable aqueous zinc ion batteries (AZIBs) offer promising potential for large-scale energy storage systems due to their high affordability and safety. However, their practical applications are hindered by the undesired rate capability and cycling stability of the used cathode, attributed to sluggish ions kinetics during charge-discharge process. Herein, we propose an electric field balancing strategy to regulate the electrolyte ions behavior by constructing a ferroelectric interface on the cathode surface using a prototypical of MnO2-based cathode. An appropriate thickness coating of ferroelectric materials coating (i.e., ß-PVDF) on the MnO2 surface is theoretically and experimentally demonstrated to enhance the ion kinetics due to the optimized electrical distribution during electrochemical operations. Further comprehensive electrochemical mechanism studies reveal that the ferroelectric interface on the MnO2@ß-PVDF not only promotes the diffusion of Zn2+ but also reduces the electrochemical overpotential (17.6 mV), resulting in improved electrochemical reversibility and capacity performance. The resultant MnO2@ß-PVDF cathode exhibits the highest capacity of 277.6 mAh g-1 (at 0.1 A g-1) and capacity retention of 68.6% after 120 cycles, surpassing both the pristine MnO2 and non-ferroelectric materials coated MnO2 electrodes. This success presents a new approach to enhance the overall electrochemical performance of the cathodes for the practical application of AZIBs.

Modulating d-Band Electronic Structures of Molybdenum Disulfide via p/n Doping to Boost Polysulfide Conversion in Lithium-Sulfur Batteries.

Polysulfide shuttle effect and sluggish sulfur reaction kinetics severely impede the cycling stability and sulfur utilization of lithium-sulfur (Li-S) batteries. Modulating d-band electronic structures of molybdenum disulfide electrocatalysts via p/n doping is promising to boost polysulfide conversion and suppress polysulfide migration in lithium-sulfur batteries. Herein, p-type V-doped MoS2 (V-MoS2 ) and n-type Mn-doped MoS2 (Mn-MoS2 ) catalysts are well-designed. Experimental results and theoretical analyses reveal that both of them significantly increase the binding energy of polysulfides on the catalysts' surface and accelerate the sluggish conversion kinetics of sulfur species. Particularly, the p-type V-MoS2 catalyst exhibits a more obvious bidirectional catalytic effect. Electronic structure analysis further demonstrates that the superior anchoring and electrocatalytic activities are originated from the upward shift of the d-band center and the optimized electronic structure induced by duplex metal coupling. As a result, the Li-S batteries with V-MoS2 modified separator exhibit a high initial capacity of 1607.2 mAh g-1 at 0.2 C and excellent rate and cycling performance. Moreover, even at a high sulfur loading of 6.84 mg cm-2 , a favorable initial areal capacity of 8.98 mAh cm-2 is achieved at 0.1 C. This work may bring widespread attention to atomic engineering in catalyst design for high-performance Li-S batteries.

Enhancement of Light and X-ray Charging in Persistent Luminescence Nanoparticle Scintillators Zn2SiO4:Mn2+, Yb3+, Li.

Persistent luminescence nanoparticle scintillators (PLNS) have been attempted for X-ray-induced photodynamic therapy (X-PDT) because persistent luminescence after ceasing radiation can make PLNS use less cumulative irradiation time and dose to generate the same amount of reactive oxygen species (ROS) compared with conventional scintillators to combat cancer cells. However, excessive surface defects in PLNS reduce the luminescence efficiency and quench the persistent luminescence, which is fatal to the efficacy of X-PDT. Herein, the PLNS of SiO2@Zn2SiO4:Mn2+, Yb3+, Li+ was designed by the energy trap engineering and synthesized by a simple template method, which has excellent X-ray and UV-excited persistent luminescence and continuously tunable emission spectra from 520 to 550 nm. Its luminescence intensity and afterglow time are more than 7 times that of the reported Zn2SiO4:Mn2+ used for X-PDT. By loading a Rose Bengal (RB) photosensitizer, an effective persistent energy transfer from the PLNS to photosensitizer is observed even after the removal of X-ray irradiation. The X-ray dose of nanoplatform SiO2@Zn2SiO4:Mn2+, Yb3+, Li+@RB in X-PDT of HeLa cancer cells was reduced to 0.18 Gy compared to the X-ray dose of 1.0 Gy for Zn2SiO4:Mn for X-PDT. This indicates that the Zn2SiO4:Mn2+, Yb3+, Li+ PLNS have great potential for X-PDT applications.

A Biocompatible Supercapacitor Diode with Enhanced Rectification Capability toward Ion/Electron-Coupling Logic Operations.

The main challenge faced by the forthcoming human-computer interaction is that biological systems and electronic devices adopt two different information carriers, i.e., ions and electrons, respectively. To bridge the gap between these two systems, developing ion/electron-coupling devices for logic operation is a feasible and effective approach. Accordingly, herein a supercapacitor-based ionic diode (CAPode) that takes electrochemically amorphized molybdenum oxide as the working electrode is developed. Benefiting from its unique size and charge dual ion-sieving effects, the molybdenum oxide electrode exhibits a record-high rectification ratio of 136, which is over 10 times higher than those of reported systems. It also delivers an ultrahigh specific capacitance of 448 F g⁻1 and an excellent cycling stability of up to 20 000 cycles, greatly outperforming those of previous works. These excellent rectification capability and electrochemical performances allow the as-built CAPode to work well in AND and OR logic gates, validating great potential in ion/electron-coupling logic operations. More attractively, the superior biocompatibilities of molybdenum oxide and relevant constituent materials enable the constructed CAPode to be applied as bioelectronics without regard to biosafety, paving a new way toward forthcoming human-computer interaction.

High-Performance Biodegradable Energy Storage Devices Enabled by Heterostructured MoO3 -MoS2 Composites.

Biodegradable implantable devices are of growing interest in biosensors and bioelectronics. One of the key unresolved challenges is the availability of power supply. To enable biodegradable energy-storage devices, herein, 2D heterostructured MoO3 -MoS2 nanosheet arrays are synthesized on water-soluble Mo foil, showing a high areal capacitance of 164.38 mF cm-2 (at 0.5 mA cm-2 ). Employing the MoO3 -MoS2 composite as electrodes of a symmetric supercapacitor, an asymmetric Zn-ion hybrid supercapacitor, and an Mg primary battery are demonstrated. Benefiting from the advantages of MoO3 -MoS2 heterostructure, the Zn-ion hybrid supercapacitors deliver a high areal capacitance (181.86 mF cm-2 at 0.5 mA cm-2 ) and energy density (30.56 µWh cm-2 ), and the Mg primary batteries provide a stable high output voltage (≈1.6 V) and a long working life in air/liquid environment. All of the used materials exhibit desirable biocompatibility, and these fabricated devices are also fully biodegradable. Demonstration experiments display their potential applications as biodegradable power sources for various electronic devices.

A stable and high-energy aqueous aluminum based battery.

Aqueous aluminum ion batteries (AAIBs) have received growing attention because of their low cost, safe operation, eco-friendliness, and high theoretical capacity. However, one of the biggest challenges for AAIBs is the poor reversibility due to the presence of an oxide layer and the accompanying hydrogen evolution reaction. Herein, we develop a strongly hydrolyzed/polymerized aluminum-iron hybrid electrolyte to improve the electrochemical behavior of AAIBs. On the one hand, the designed electrolyte enables aluminum ion intercalation/deintercalation on the cathode while stable deposition/stripping of aluminium occurs on the anode. On the other hand, the electrolyte contributes to the electrochemical energy storage through an iron redox reaction. These two reactions are parallel and coupled through an Fe-Al alloy on the anode, thus enhancing the reversibility and energy density of AAIBs. As a result, this hybrid-ion battery delivers a specific volumetric capacity of 35 A h L-1 at the current density of 1.0 mA cm-2, and remarkable stability with a capacity retention of 90% over 500 cycles. Furthermore, the hybrid-ion battery achieves a high energy density of approximately 42 W h L-1 with an average operating voltage of 1.1 V. This green electrolyte for high-energy AAIBs holds promises for large-scale energy storage applications.

Role of N in Transition-Metal-Nitrides for Anchoring Platinum-Group Metal Atoms toward Single-Atom Catalysis.

Single-atom catalysts (SACs) with a maximum atom utilization efficiency have received growing attention in heterogeneous catalysis. The supporting substrate that provides atomic-dispersed anchoring sites and the local electronic environment in these catalysts is crucial to their activity and stability. Here, inspired by N-doped graphene substrate, the role of N is explored in transition metal nitrides for anchoring single metal atoms toward single-atom catalysis. A pore-rich metallic vanadium nitride (VN) nanosheet is fabricated as one supporting-substrate example, whose surface features abundant unsaturated N sites with lower binding energy than that of widely used N-doped graphene. Impressively, it is found that this support can anchor nearly all platinum-group single atoms (e.g., platinum, palladium, iridium, and ruthenium), and even be extendable to multiple SACs, i.e., binary (Pt/Pd) and ternary (Pt/Pd/Ir). As a proof-of-concept application for hydrogen production, Pt-based SAC (Pt1 -VN) performs excellently, exhibiting a mass activity up to 22.55 A mg-1 Pt at 0.05 V and a high turnover frequency value close to 0.350 H2 s-1 , superior to commercial platinum/carbon catalyst. The catalyst's durability can be further improved by using binary (Pt1 Pd1 -VN) SAC. This work provides inexpensive and durable nitride-based support, giving a possible pathway for universally constructing platinum-group SACs.

Achieving high-rate and durable aqueous rechargeable Zn-Ion batteries by enhancing the successive electrochemical conversion reactions.

The mild electrolyte working environment of rechargeable aqueous Zn-ion batteries (AZIBs) features its promising characteristic and potential application for large-scale energy storage system. However, the poor cycling stability significantly hinders the broad application of AZIBs due to the complex electrochemical conversion reactions during charge-discharge process. Herein, we propose a strategy to improve the electrochemical performance of AZIB by enhancing the successive electrochemical conversion reactions. With a rational design of electrode, an even homogeneous electric field can be achieved in the cathode side, resulting to significantly enhanced efficiency of successive electrochemical conversion reactions. Charge storage mechanism studies reveal that the reversibility behaviors of byproducts alkaline zinc sulfate (ZHS) can dramatically determine the H+/Zn2+ de/intercalation process, and a high reversibility characteristic ensures the facilitated electrochemical kinetics. As expected, the resultant AZIB possesses outstanding electrochemical performance with a high specific capacity of 425.08 mAh⋅g-1 at 0.1 A⋅g-1, an excellent rate capacity of about 60% (246.6 mAh⋅g-1 at 1 A⋅g-1) and superior cycling stability of 93.7% after 3000 cycles (at 3 A⋅g-1). This effective strategy and thinking proposed here may open a new avenue for the development of high-performing AZIBs.