Strategies for the efficient biosynthesis of ß-carotene through microbial fermentation.

ß-Carotene is an orange fat-soluble compound, which has been widely used in fields such as food, medicine and cosmetics owing to its anticancer, antioxidant and cardiovascular disease prevention properties. Currently, natural ß-carotene is mainly extracted from plants and algae, which cannot meet the growing market demand, while chemical synthesis of ß-carotene cannot satisfy the pursuit for natural products of consumers. The ß-carotene production through microbial fermentation has become a promising alternative owing to its high efficiency and environmental friendliness. With the rapid development of synthetic biology and in-depth study on the synthesis pathway of ß-carotene, microbial fermentation has shown promising applications in the ß-carotene synthesis. Accordingly, this review aims to summarize the research progress and strategies of natural carotenoid producing strain and metabolic engineering strategies in the heterologous synthesis of ß-carotene by engineered microorganisms. Moreover, it also summarizes the adoption of inexpensive carbon sources to synthesize ß-carotene as well as proposes new strategies that can further improve the ß-carotene production.

Engineering industrial yeast for improved tolerance and robustness.

As an important cell factory, industrial yeast has been widely used for the production of compounds ranging from bulk chemicals to complex natural products. However, various adverse conditions including toxic products, extreme pH, and hyperosmosis etc., severely restrict microbial growth and metabolic performance, limiting the fermentation efficiency and diminishing its competitiveness. Therefore, enhancing the tolerance and robustness of yeasts is critical to ensure reliable and sustainable production of metabolites in complex industrial production processes. In this review, we provide a comprehensive review of various strategies for improving the tolerance of yeast cells, including random mutagenesis, system metabolic engineering, and material-mediated immobilization cell technology. It is expected that this review will provide a new perspective to realize the response and intelligent regulation of yeast cells to environmental stresses.

Transcriptomic Analysis Reveals the Potential Mechanisms for Improving Carotenoid Production in Rhodosporidium toruloides Z11 under Light Stress.

Carotenoids, as a type of tetraterpene compound, have been widely used in food, medical, and health areas owing to their antioxidant, immune enhancement, and disease risk reduction effects. Rhodosporidium toruloides is a promising oleaginous red yeast that can industrially synthesize carotenoids. In this study, the effects of different light exposure times and intervals on carotenoid production by R. toruloides Z11 were first investigated. Results showed that a higher carotenoid content (1.29 mg/g) can be achieved when R. toruloides Z11 was exposed to light for 12 h per day, which was increased by 1.98 times compared with that of dark cultivation. Transcriptome profiling revealed that light stress could effectively promote the gene expression levels of GGPS1 and AL1 in the carotenoid biosynthesis pathway and phr in the DNA photolysis pathway of R. toruloides. This work will provide a molecular foundation to further improve the production efficiency of carotenoids by genetic engineering.

Strategies for the biological synthesis of D-glucuronic acid and its derivatives.

D-glucuronic acid is a kind of glucose derivative, which has excellent properties such as anti-oxidation, treatment of liver disease and hyperlipidemia, and has been widely used in medicine, cosmetics, food and other fields. The traditional production methods of D-glucuronic acid mainly include natural extraction and chemical synthesis, which can no longer meet the growing market demand. The production of D-glucuronic acid by biocatalysis has become a promising alternative method because of its high efficiency and environmental friendliness. This review describes different production methods of D-glucuronic acid, including single enzyme catalysis, multi-enzyme cascade, whole cell catalysis and co-culture, as well as the intervention of some special catalysts. In addition, some feasible enzyme engineering strategies are provided, including the application of enzyme immobilized scaffold, enzyme mutation and high-throughput screening, which provide good ideas for the research of D-glucuronic acid biocatalysis.

Engineering Scheffersomyces segobiensis for palmitoleic acid-rich lipid production.

Palmitoleic acid (POA; C16:1) is an essential high-value ω-7-conjugated fatty acid with beneficial bioactivities and potential applications in the nutraceutical and pharmaceutical industries. Previously, the oleaginous yeast Scheffersomyces segobiensis DSM27193 has been identified as a promising production host as an alternative for POA extraction from plant or animal sources. Here, the POA-producing capacity of this host was further expanded by optimizing the fermentation process and molecular strain engineering. Specifically, a dual fermentation strategy (O-S dynamic regulation strategy) focused on the substrate and dissolved oxygen concentration was designed to eliminate ethanol and pyruvate accumulation during fermentation. Key genes influencing POA production, such as jen, dgat, ole were identified on the transcriptional level and were subsequently over-expressed. Furthermore, the phosphoketolase (Xpk)/phosphotransacetylase (Pta) pathway was introduced to improve the yield of the precursor acetyl-CoA from glucose. The resulting cell factory SS-12 produced 7.3 g/L of POA, corresponding to an 11-fold increase compared to the wild type, presenting the highest POA titre reported using oleaginous yeast to date. An economic evaluation based on the raw materials, utilities and facility-dependent costs showed that microbial POA production using S. segobiensis can supersede the current extraction method from plant oil and marine fish. This study reports the construction of a promising cell factory and an effective microbial fermentation strategy for commercial POA production.

Strategies for the biological production of ectoine by using different chassis strains.

As an amino acid derivative and a typical compatible solute, ectoine can assist microorganisms in resisting high osmotic pressure. Own to its long-term moisturizing effects, ectoine shows extensive applications in cosmetics, medicine and other fields. With the rapid development of synthetic biology and fermentation engineering, many biological strategies have been developed to improve the ectoine production and simplify the production process. Currently, the microbial fermentation has been widely used for large scaling ectoine production. Accordingly, this review will introduce the metabolic pathway for ectoine synthesis and also comprehensively evaluate both wild-type and genetically modified strains for ectoine production. Furthermore, process parameters affecting the ectoine production efficiency and adoption of low cost substrates will be evaluated. Lastly, future prospects on the improvement of ectoine production will be proposed.

Microbial synthesis of pyrroloquinoline quinone.

Pyrroloquinoline quinone (PQQ) is a peptide-modified natural product. PQQ has important physiological functions such as anti-oxidation, anti-aging, and immunity enhancement. However, due to the lack of in-depth understanding of PQQ biosynthesis and regulation, inefficient PQQ production level limits its wide application. Accordingly, there is still an urgent need to develop high-yielding strains for synthesis of PQQ. This paper reviewed the research and development trends on the PQQ biosynthetic pathways, catalytic reaction mechanism of key enzymes, and the selection of high-yielding strains, which also prospects for the future construction of PQQ biosynthetic microbial cell factories.

Maximizing the benefits of biofilms in fermentation processes.

Biofilm-based fermentation has great potential, as it possesses inherent characteristics such as self-immobilization, high resistance to reactants, and long-term activity. This forum focuses on research targets for promoting biofilm engineering to maximize the beneficial features of biofilms and to effectively utilize them in biofilm-mediated fermentation.

Characterization of a novel esterase and construction of a Rhodococcus-Burkholderia consortium capable of catabolism bis (2-hydroxyethyl) terephthalate.

Bis (2-hydroxyethyl) terephthalate (BHET) is one of the main compounds produced by enzymatic hydrolysis or chemical depolymerization of polyethylene terephthalate (PET). However, the lack of understanding on BHET microbial metabolism is a main factor limiting the bio-upcycling of PET. In this study, BHET-degrading strains of Rhodococcus biphenylivorans GA1 and Burkholderia sp. EG1 were isolated and identified, which can grow with BHET as the sole carbon source. Furthermore, a novel esterase gene betH was cloned from strain GA1, which encodes a BHET hydrolyzing esterase with the highest activity at 30 °C and pH 7.0. In addition, the co-culture containing strain GA1 and strain EG1 could completely degrade high concentration of BHET, eliminating the inhibition on strain GA1 caused by the accumulation of intermediate metabolite ethylene glycol (EG). This work will provide potential strains and a feasible strategy for PET bio-upcycling.

Artificial multi-enzyme cascades and whole-cell transformation for bioconversion of C1 compounds: Advances, challenge and perspectives.

Artificial multi-enzyme cascades bear great potential for bioconversion of C1 compounds to value-added chemicals. Over the past decade, massive efforts have been devoted to constructing multi-enzyme cascades to produce glycolic acid, rare functional sugars and even starch from C1 compounds. However, in contrast to traditional fermentation utilizing C1 compounds with the expectation of competitive economic performance in future industrialization, multi-enzyme cascades systems in the proof-of-concept phase are facing the challenges of upscaling. Here, we offered an overview of the recent advances in the construction of in vitro multi-enzyme cascades and whole-cell transformation using C1 compounds as substrate. In addition, the existing challenges and possible solutions were also discussed aiming to combine the strengths of in vitro and in vivo multi-enzyme cascades systems for upscaling.

Isolation of a newly Trichoderma asperellum LYS1 with abundant cellulase-hemicellulase enzyme cocktail for lignocellulosic biomass degradation.

As the most abundant and renewable natural resource in the world, lignocellulose is a promising alternative to fossil energy to relieve environmental concerns and resource depletion. However, due to its recalcitrant structure, strains with efficient degradation capability still need exploring. In this study, a fungus was successfully isolated from decayed wood and named as Trichoderma asperellum LYS1 by phylogenetic and draft genomic analysis. The further investigations showed that strain LYS1 had an outstanding performance on lignocellulose degradation, especially for hemicellulose-rich biomass. After the analysis of encoded CAZymes, mainly on GH family, a large amount of genes coding ß-glucosidase and xylanase may contribute to the high degradation of cellulose and hemicellulose. Collectively, the results generated in this study demonstrated that T. asperellum LYS1 is a potential cell factory for lignocellulose biorefinery.

Cofactor Metabolic Engineering of Escherichia coli for Aerobic L-Malate Production with Lower CO2 Emissions.

Escherichia coli has been engineered for L-malate production via aerobic cultivation. However, the maximum yield obtained through this mode is inferior to that of anaerobic fermentation due to massive amounts of CO2 emissions. Here, we aim to address this issue by reducing CO2 emissions of recombinant E. coli during aerobic L-malate production. Our findings indicated that NADH oxidation and ATP-synthesis-related genes were down-regulated with 2 g/L of YE during aerobic cultivations of E. coli E23, as compared to 5 g/L of YE. Then, E23 was engineered via the knockout of nuoA and the introduction of the nonoxidative glycolysis (NOG) pathway, resulting in a reduction of NAD+ and ATP supplies. The results demonstrate that E23 (ΔnuoA, NOG) exhibited decreased CO2 emissions, and it produced 21.3 g/L of L-malate from glucose aerobically with the improved yield of 0.43 g/g. This study suggests that a restricted NAD+ and ATP supply can prompt E. coli to engage in incomplete oxidization of glucose, leading to the accumulation of metabolites instead of utilizing them in cellular respiration.

[Advances in biotransformation of methanol into chemicals].

Methanol has become an attractive substrate for the biomanufacturing industry due to its abundant supply and low cost. The biotransformation of methanol to value-added chemicals using microbial cell factories has the advantages of green process, mild conditions and diversified products. These advantages may expand the product chain based on methanol and alleviate the current problem of biomanufacturing, which is competing with people for food. Elucidating the pathways involving methanol oxidation, formaldehyde assimilation and dissimilation in different natural methylotrophs is essential for subsequent genetic engineering modification, and is more conducive to the construction of novel non-natural methylotrophs. This review discusses the current status of research on methanol metabolic pathways in methylotrophs, and presents recent advances and challenges in natural and synthetic methylotrophs and their applications in methanol bioconversion.

Construction of Coculture System Containing Escherichia coli with Different Microbial Species for Biochemical Production.

Microbial synthesis of target chemicals usually involves multienzymatic reactions in vivo, especially for compounds with a long metabolic pathway. However, when various genes are introduced into one single strain, it leads to a heavy metabolic burden. In contrast, the microbial coculture system can allocate metabolic pathways into different hosts, which will relieve the metabolic burdens. Escherichia coli is the most used chassis to synthesize biofuels and chemicals owing to its well-known genetics, high transformation efficiency, and easy cultivation. Accordingly, cocultures containing the cooperative E. coli with other microbial species have received great attention. In this review, the individual applications and boundedness of different combinations will be summarized. Additionally, the strategies for the self-regulation of population composition, which can help enhance the stability of a coculture system, will also be discussed. Finally, perspectives for the cocultures will be proposed.

Customized spatial niches for synthetic microbial consortia.

The construction of synthetic microbial consortia has been considered a new frontier. However, maintaining artificial microbial communities remains challenging because the dominant strain eventually outcompetes the others. Inspired by natural ecosystems, one promising approach to assemble stable consortia is to construct spatial niches partitioning subpopulations and overlapping abiotic requirements.

Construction of stable microbial consortia for effective biochemical synthesis.

Microbial consortia can complete otherwise arduous tasks through the cooperation of multiple microbial species. This concept has been applied to produce commodity chemicals, natural products, and biofuels. However, metabolite incompatibility and growth competition can make the microbial composition unstable, and fluctuating microbial populations reduce the efficiency of chemical production. Thus, controlling the populations and regulating the complex interactions between different strains are challenges in constructing stable microbial consortia. This Review discusses advances in synthetic biology and metabolic engineering to control social interactions within microbial cocultures, including substrate separation, byproduct elimination, crossfeeding, and quorum-sensing circuit design. Additionally, this Review addresses interdisciplinary strategies to improve the stability of microbial consortia and provides design principles for microbial consortia to enhance chemical production.

Electroactive microorganisms synthesizing iron sulfide nanoparticles for enhanced hexavalent chromium removal in microbial fuel cells.

Microbial fuel cells (MFCs) have been considered a promising technology for Cr6+ removal, but they are limited by Cr6+-reducing biocathodes with low extracellular electron transfer (EET) and poor microbial activity. In this study, three kinds of nano-FeS hybridized electrode biofilms, obtained through synchronous biosynthesis (Sy-FeS), sequential biosynthesis (Se-FeS) and cathode biosynthesis (Ca-FeS), were applied as biocathodes for Cr6+ removal in MFCs. The Ca-FeS biocathode exhibited the best performance due to the superior properties of biogenic nano-FeS (e.g., more synthetic amount, smaller particle size, better dispersion). The MFC with the Ca-FeS biocathode achieved the highest power density (42.08 ± 1.42 mW/m2) and Cr6+ removal efficiency (99.18 ± 0.1 %), which were 1.42 and 2.08 times as high as those of the MFC with the normal biocathode, respectively. The synergistic effects of nano-FeS and microorganisms enhanced the bioelectrochemical reduction of Cr6+, first realizing deep reduction of Cr6+ to Cr0 in biocathode MFCs. This significantly alleviated the cathode passivation caused by Cr3+ deposition. In addition, the hybridized nano-FeS as "armor" layers protected the microbes from toxic attack by Cr6+, improving the biofilm physiological activity and extracellular polymeric substances (EPS) secretion. The hybridized nano-FeS as "electron bridges" facilitated the microbial community to form a balanced, stable and syntrophic ecological structure. This study proposes a novel strategy through the cathode in-situ biosynthesis of nanomaterials to fabricate hybridized electrode biofilms with enhanced EET and microbial activity for toxic pollutant treatment in bioelectrochemical systems.

Enhanced ß-carotene production in Yarrowia lipolytica through the metabolic and fermentation engineering.

ß-Carotene is a kind of high-value tetraterpene compound, which shows various applications in medical, agricultural, and industrial areas owing to its antioxidant, antitumor, and anti-inflammatory activities. In this study, Yarrowia lipolytica was successfully metabolically modified through the construction and optimization of ß-carotene biosynthetic pathway for ß-carotene production. The ß-carotene titer in the engineered strain Yli-C with the introduction of the carotenogenesis genes crtI, crtE, and crtYB can reach 34.5 mg/L. With the overexpression of key gene in the mevalonate pathway and the enhanced expression of the fatty acid synthesis pathway, the ß-carotene titer of the engineered strain Yli-CAH reached 87 mg/L, which was 152% higher than that of the strain Yli-C. Through the further expression of the rate-limiting enzyme tHMGR and the copy number of ß-carotene synthesis related genes, the ß-carotene production of Yli-C2AH2 strain reached 117.5 mg/L. The final strain Yli-C2AH2 produced 2.7 g/L ß-carotene titer by fed-batch fermentation in a 5.0-L fermenter. This research will greatly speed up the process of developing microbial cell factories for the commercial production of ß-carotene. ONE-SENTENCE SUMMARY: In this study, the ß-carotene synthesis pathway in engineered Yarrowia lipolytica was enhanced, and the fermentation conditions were optimized for high ß-carotene production.

Report of genome sequence of Rhodococcus biphenylivorans strain GA1, an isolate capable of efficiently degrading lignin and its derivates.

Rhodococcus biphenylivorans GA1 was successfully isolated, which can efficiently degrade alkali lignin and a variety of lignin-derived aromatic compounds as the sole carbon source. Whole genome sequencing of strain GA1 showed that it possessed G + C content of 68% with the size of 6.0 Mb and 4319 putative open reading frames (ORFs). Four replicons consisting of one circular chromosome (ChrA1) and three circular plasmids (pGA1, pGA2, pGA3) were found. Among these annotated proteins, lignin depolymerizing peroxidases (Dyp) and two lignin-derived aromatic compounds cleavage dioxygenases, protocatechuate 3,4-dioxygenase(P34D) and catechol-1,2-dioxygenase (C12D) play key roles in the catabolism of lignin.

Improved performance of Cr(vi)-reducing microbial fuel cells by nano-FeS hybridized biocathodes.

Biocathode microbial fuel cells (MFCs) show promise for Cr(vi)-contaminated wastewater treatment. However, biocathode deactivation and passivation caused by highly toxic Cr(vi) and nonconductive Cr(iii) deposition limit the development of this technology. A nano-FeS hybridized electrode biofilm was fabricated by simultaneously feeding Fe and S sources into the MFC anode. This bioanode was then reversed as the biocathode to treat Cr(vi)-containing wastewater in a MFC. The MFC obtained the highest power density (40.75 ± 0.73 mW m-2) and Cr(vi) removal rate (3.99 ± 0.08 mg L-1 h-1), which were 1.31 and 2.00 times those of the control, respectively. The MFC also maintained high stability for Cr(vi) removal in three consecutive cycles. These improvements were due to synergistic effects of nano-FeS with excellent properties and microorganisms in the biocathode. The mechanisms were: (1) the accelerated electron transfer mediated by nano-FeS 'electron bridges' strengthened bioelectrochemical reactions, firstly realizing deep reduction of Cr(vi) to Cr(0) and thus effectively alleviating cathode passivation; (2) nano-FeS as 'armor' layers improved cellular viability and extracellular polymeric substance secretion; (3) the biofilm selectively enriched a diversity of bifunctional bacteria for electrochemical activity and Cr(vi) removal. This study provides a new strategy to obtain electrode biofilms for sustainable treatment of heavy metal wastewater.