Soft Gel Filler Embedded Elastomer with Surfactant Improved Interface for Dielectric Elastomer Actuators.

Stretchable materials are the foundation of dielectric actuators (DEAs) for artificial muscle. However, the inadequate dielectric constant of stretchable materials has always greatly limited the performance of artificial muscle. Recently, soft fillers have been proposed to improve the dielectric property and preserve the stretchability for softness, aiming to avoid the stiffening effect of traditional rigid fillers. As composites, an amount of interfacial region is generated, which remarkably affects composites' performance from dielectrics to mechanics. Herein, we demonstrate that the size effect, interfacial binding, and compatibility have a great impact on soft filler doped composites. Particularly, according to the liquid characteristics of soft fillers, we explore an interfacial modification method using surfactants. Composite breakdown strength is thus enhanced 2.2-fold from that in the control group due to the reduction of mismatch between fillers and matrix. Moreover, surfactants alleviate the well-known stiffening effect in small fillers. The area strain of the composites reaches 10.3 ± 0.4% at a low electric field of 7 MV/m, and a soft micropump is successfully assembled. These findings demonstrate a unique and combined interfacial influence of soft filler doped elastomer, which promotes the advancements of the dielectric elastomer artificial muscle.

Recent advances in cotton fabric-based photocatalytic composites for the degradation of organic contaminants.

Cotton is one of the oldest and most widely used natural fibers in the world. It enables a wide range of applications due to its excellent moisture absorption, thermal insulation, heat resistance, and durability. Benefiting from current developments in textile technology and materials science, people are constantly seeking more comfortable, more beautiful and more versatile cotton fabrics. As the second skin of body, clothing not only provides the basic needs of wear but also increases the protection of body against different environmental stimuli. In this article, a comprehensive review is proposed regarding research activities of systematically summarise the development and research of cotton fabric-based photocatalytic composites for the degradation of organic contaminants in the area of self-cleaning, degradation of gaseous contaminants, pathogenic bacteria or viruses, and chemical warfare agents. Specifically, we begin with a brief exposition of the background and significance of cotton fabric-based photocatalytic composites. Next, a systematical review on cotton fabric-based photocatalytic composites is provided according to their mechanisms and advanced applications. Finally, a simple summary and analysis concludes the current limitations and future directions in these composites for the degradation of organic contaminants.

Fluorine-free nanoparticle coatings on cotton fabric: comparing the UV-protective and hydrophobic capabilities of silica vs. silica-ZnO nanostructures.

Robust, hydrophobic woven cotton fabrics were obtained through the sol-gel dip coating of two different nanoparticle (NP) architectures; silica and silica-ZnO. Water repellency values as high as 148° and relatively low tilt angles for fibrous fabrics (12°) were observed, without the need for fluorinated components. In all cases, this enhanced functionality was achieved with the broad retention of water vapor permeability characteristics, i.e., less than 10% decrease. NP formation routes indicated direct bonding interactions in both the silica and silica-ZnO structures. The physico-chemical effects of NP-compatibilizer (i.e., polydimethoxysilane (PDMS) and n-octyltriethoxysilane (OTES) at different ratios) coatings on cotton fibres indicate that compatibilizer-NP interactions are predominantly physical. Whenever photoactive ZnO-containing additives were used, there was a minor decrease in hydrophobic character, but order of magnitude increases in UV-protective capability (i.e., UPF > 384); properties which were absent in non-ZnO-containing samples. Such water repellency and UPF capabilities were stable to both laundering and UV-exposure, resisting the commonly encountered UV-induced wettability transitions associated with photoactive ZnO. These results suggest that ZnO-containing silica NP coatings on cotton can confer both excellent and persistent surface hydrophobicity as well as UV-protective capability, with potential uses in wearables and functional textiles applications.

Applications of waste polyethylene terephthalate (PET) based nanostructured materials: A review.

While polyethylene terephthalate (PET) has enjoyed widespread use, a large volume of plastic waste has also been produced as a result, which is detrimental to the environment. Traditional treatment of plastic waste, such as landfilling and incinerating waste, causes environmental pollution and poses risks to public health. Recycling PET waste into useful chemicals or upcycling the waste into high value-added materials can be remedies. This review first provides a brief introduction of the synthesis, structure, properties, and applications of virgin PET. Then the conversion process of waste PET into high value-added materials for different applications are introduced. The conversion mechanisms (including degradation, recycling and upcycling) are detailed. The advanced applications of these upgraded materials in energy storage devices (supercapacitors, lithium-ion batteries, and microbial fuel cells), and for water treatment (to remove dyes, heavy metals, and antibiotics), environmental remediation (for air filtration, CO2 adsorption, and oil removal) and catalysis (to produce H2, photoreduce CO2, and remove toxic chemicals) are discussed at length. In general, this review details the exploration of advanced technologies for the transformation of waste PET into nanostructured materials for various applications, and provides insights into the role of high value-added waste products in sustainability and economic development.

Fibrous Zr-MOF Nanozyme Aerogels with Macro-Nanoporous Structure for Enhanced Catalytic Hydrolysis of Organophosphate Toxins.

Metal-organic frameworks (MOFs) with Lewis acid catalytic sites, such as zirconium-based MOFs (Zr-MOFs), comprise a growing class of phosphatase-like nanozymes that can degrade toxic organophosphate pesticides and nerve agents. Rationally engineering and shaping MOFs from as-synthesized powders into hierarchically porous monoliths is essential for their use in emerging applications, such as filters for air and water purification and personal protection gear. However, several challenges still limit the production of practical MOF composites, including the need for sophisticated reaction conditions, low MOF catalyst loadings in the resulting composites, and poor accessibility to MOF-based active sites. To overcome these limitations, a rapid synthesis method is developed to introduce Zr-MOF nanozyme coating into cellulose nanofibers, resulting in the formation of processable monolithic aerogel composites with high MOF loadings. These composites contain Zr-MOF nanozymes embedded in the structure, and hierarchical macro-micro porosity enables excellent accessibility to catalytic active sites. This multifaceted rational design strategy, including the selection of a MOF with many catalytic sites, fine-tuning the coating morphology, and the fabrication of a hierarchically structured monolithic aerogel, renders synergistic effects toward the efficient continuous hydrolytic detoxification of organophosphorus-based nerve agent simulants and pesticides from contaminated water.

4-Electron redox enabled by a perylene diimide containing side-chain amines for efficient organic cathode development.

A perylene diimide containing side-chain amines (PDIN) was studied as an organic cathode for application in lithium batteries, showing a high capacity of 174 mA h g-1. The chemical structures, experimental results, and calculation analyses verify that PDIN performed a 4-electron redox reaction jointly involving its CO and side-chain amine groups. This study promotes the development of organic cathodes with multi-electron redox reactions.

A Cross-Plane Design for Wearable Thermoelectric Generators with High Stretchability and Output Performance.

Stretchable wearable thermoelectric (TE) generators (WTEGs) without compromising output performance for real wearables have attracted much attention recently. Herein, a 3D thermoelectric generator with biaxial stretchability is constructed on the device level. Ultraflexible inorganic Ag/Ag2 Se strips are sewn into the soft purl-knit fabric, in which the thermoelectric legs are aligned in the direction of vertical heat flux. A stable and sufficient temperature gradient of 5.2 °C across the WTEG is therefore achieved when contacted with the wrist at a room temperature of 26.3 °C. The prepared TEG generates a high power density of 10.02 W m-2 at a vertical temperature gradient of 40 K. Meanwhile, the reliable energy harvesting promises a variation of less than 10% under the biaxial stretching up to 70% strain via leveraging the combined effects of the stretchability of knit fabric and geometry of TE strips. The knit fabric-supported TEG enables a seamless conformation to the skin as well as efficient body heat harvesting, which can provide sustainable energy to low power consumption wearable electronics.

Guanidine-containing double-network silks with enhanced tensile and antibacterial property.

The bacterial infection of surgical wounds results in prolonged hospitalization and even death of patients, calling for antibacterial function in modern suture products. To tackle this challenge, cationic guanidine-containing copolymer was synthesized, exhibiting antibacterial potency over 5 log reduction against both Gram-positive S. aureus and Gram-negative E. coli. Furthermore, we developed a double-network silk suture by integrating a guanidine-containing copolymer network into the silk fibroin network. This suture exhibited biocidal activity against S. aureus and E. coli, and superior strength compared to the commercial product in both dry and wet conditions. These results may bring general benefits to public health and medical equipment sustainability.

Terahertz polarization and chirality modulation induced by asymmetry inversion combining chiral metasurface and liquid crystal anisotropy.

We experimentally demonstrate a dynamic terahertz (THz) chiral device based on a composite structure of anisotropic liquid crystals (LCs) sandwiched between a bilayer metasurface. The device supports the symmetric mode and antisymmetric mode under the incidence of left- and right-circular polarized waves, respectively. The different coupling strengths of the two modes reflect the chirality of the device, and the anisotropy of the LCs can change the coupling strength of the modes, which brings tunability to the chirality of the device. The experimental results show that the circular dichroism of the device can be dynamically controlled from 28 dB to -32 dB (i.e., inversion regulation) at approximately 0.47 THz and from -32 dB to 1 dB (i.e., switching regulation) at approximately 0.97 THz. Moreover, the polarization state of the output wave is also tunable. Such flexible and dynamic manipulation of THz chirality and polarization might build an alternative pathway for complex THz chirality control, high-sensitivity THz chirality detection, and THz chiral sensing.

Large-area ultra-thin GO nanofiltration membranes prepared by a pre-crosslinking rod coating technique.

In existing separation membranes, it is difficult to quickly produce large-area graphene oxide (GO) nanofiltration membranes with high permeability and high rejection, which is the bottleneck of industrialization. In this study, a pre-crosslinking rod-coating technique is reported. A GO-P-Phenylenediamine (PPD) suspension was obtained by chemically crosslinking GO and PPD for 180 min. After scraping and coating with a Mayer rod, the ultra-thin GO-PPD nanofiltration membrane with an area of 400 cm2 and a thickness of 40 nm was prepared in 30 s. The PPD formed an amide bond with GO to improve its stability. It also increased the layer spacing of GO membrane, which could improve the permeability. The prepared GO nanofiltration membrane had a 99 % rejection rate for dyes such as methylene blue, crystal violet, and Congo red. Meanwhile, the permeation flux reached to 42 LMH/bar, which was 10 times that of the GO membrane without PPD crosslinking, and it still maintained excellent stability under strongly acidic and basic conditions. This work successfully solved the problems of GO nanofiltration membranes, including the large-area fabrication, high permeability and high rejection.

Platelet-rich plasma-loaded bioactive chitosan@sodium alginate@gelatin shell-core fibrous hydrogels with enhanced sustained release of growth factors for diabetic foot ulcer healing.

The ability of autologous platelet-rich plasma (PRP) gel to promote rapid wound healing without immunological rejection has opened new avenues for the treatment of diabetic foot wounds. However, PRP gel still suffers from the quick release of growth factors (GFs) and requires frequent administration, thus resulting in decreased wound healing efficiency, higher cost as well as greater pain and suffering for the patients. In this study, the flow-assisted dynamic physical cross-linked coaxial microfluidic three-dimensional (3D) bio-printing technology, combined with the calcium ion chemical dual cross-linking method was developed to design PRP-loaded bioactive multi-layer shell-core fibrous hydrogels. The prepared hydrogels exhibited outstanding water absorption-retention capacity, good biocompatibility as well as a broad-spectrum antibacterial effect. Compared with clinical PRP gel, these bioactive fibrous hydrogels displayed a sustained release of GFs, reducing the administration frequency by 33 % availably during the wound treatment, but more prominent therapeutic effects such as effective reduced inflammation, in addition to promoting the growth of granulation tissue and angiogenesis, the formation of high-density hair follicles, and the generation of regular ordered and high-density collagen fiber network, which suggested great promise as exceptional candidates for treatment of diabetic foot ulcer in clinical settings.

Improving Generalizability of Spectral Reflectance Reconstruction Using L1-Norm Penalization.

Spectral reflectance reconstruction for multispectral images (such as Weiner estimation) may perform sub-optimally when the object being measured has a texture that is not in the training set. The accuracy of the reconstruction is significantly lower without training samples. We propose an improved reflectance reconstruction method based on L1-norm penalization to solve this issue. Using L1-norm, our method can provide the transformation matrix with the favorable sparse property, which can help to achieve better results when measuring the unseen samples. We verify the proposed method by reconstructing spectral reflection for four types of materials (cotton, paper, polyester, and nylon) captured by a multispectral imaging system. Each of the materials has its texture and there are 204 samples in each of the materials/textures in the experiments. The experimental results show that when the texture is not included in the training dataset, L1-norm can achieve better results compared with existing methods using colorimetric measure (i.e., color difference) and shows consistent accuracy across four kinds of materials.

Biomimetic three-layer hierarchical scaffolds for efficient water management and cell recruitment.

Taking inspiration from the structures of roots, stems and leaves of trees in nature, a biomimetic three-layered scaffold was designed for efficient water management and cell recruitment. Using polycaprolactone (PCL) and polyacrylonitrile (PAN) as raw materials, radially oriented nanofiber films and multistage adjustable nanofiber films were prepared through electrospinning technology as the base skin-friendly layer (roots) and middle unidirectional moisture conductive material (stems), the porous polyurethane foam was integrated as the outer moisturizing layer (leaves). Among which, radially oriented nanofiber films could promote the directional migration of fibroblasts and induce cell morphological changes. For the spatially hierarchically nanofiber films, the unidirectional transport of liquid was effectively realized. While the porous polyurethane foam membrane could absorb 9 times its weight in biofluid and retain moisture for up to 10 h. As a result, the biomimetic three-layered scaffolds with different structures can promote wound epithelization and drain biofluid while avoiding wound inflammation caused by excessive biofluid, which is expected to be applied in the field of skin wounds.

Synthesis and photochromism of catechol-containing symmetrical azobenzene compounds.

Symmetrical azobenzene derivatives with two catechol groups, 1d-4d, were synthesized as kinds of novel compounds, and the structures were confirmed using mass spectrometry and nuclear magnetic resonance spectroscopy. These compounds could attain photostationary state rapidly in solution upon UV irradiation, and their photochromism had good reversibility. Substituents and their positions on azobenzene chromophore had obvious influence on the maximum absorption and photochromic performances of these as-synthesized compounds. Electron-donating group on ortho positions could contribute to the redshift π-π* band. The sulfonamide group that is bonded to dopamine molecules and azobenzene rings caused a negligible n-π* transition of cis isomer, resulting in photobleaching upon UV irradiation. Among the four compounds, 4d had the strongest electron-donating ortho-methoxy substituents and lower planarity; thus its absorption could decrease more significantly upon UV irradiation of the same intensity, and its cis-to-trans conversion could be up to 63%. Furthermore, owing to the presence of catechol groups, 4d showed an effective affinity and adhesion to substrate, and on the surface of substrate, a weak colour change could be observed upon UV irradiation, but the reversibility was poorer than that in solution.

Novel and Sustainable Colorants Developed via Incorporating Azo Chromophores into Dopamine Molecules.

Inspired by the application of dopamine as an "anchor" and UV absorber, novel sustainable colorants with biscatecholic structure were synthesized through a simple incorporation of simple azo chromophores with dopamine. Their structures were confirmed using MS and NMR analyses, and their application on textile materials was investigated. Compared to the simple azo chromophores with almost no coloring ability on fabrics, the biscatecholic colorants could color different fabrics effectively, mainly through self-polymerization only in the presence of a trace amount of organic base at room temperature, which is environmentally friendly in terms of saving resources and alleviating chemical pollution. Meanwhile, the UV resistance of colored fabrics was enhanced significantly, showing the advantage of protecting wearers from UV damage.

A multifunctional 3D dressing unit based on the core-shell hydrogel microfiber for diabetic foot wound healing.

The healing mechanism of diabetic foot wounds is very complicated, and it is difficult for a single-function medical dressing to achieve good therapeutic effects. We propose a simple coaxial biological 3D printing technology, which uses one-step 3D deposition to continuously produce multifunctional medical dressings on the basis of core-shell hydrogel fibers. These dressings have good biocompatibility, controlled drug-release performance, excellent water absorption and retention, and antibacterial and anti-inflammatory functions. In vivo experiments with type 2 diabetic rats were performed over a 14-day period to compare the performance of the multifunctional 3D dressing with a gauze control; the multifunctional 3D dressing reduced inflammation, effectively increased the post-healing thickness of granulation tissue, and promoted the formation of blood vessels, hair follicles, and highly oriented collagen fiber networks. Therefore, the proposed multifunctional dressing is expected to be suitable for clinical applications for healing diabetic foot wounds.

Circadian humidity fluctuation induced capillary flow for sustainable mobile energy.

Circadian humidity fluctuation is an important factor that affects human life all over the world. Here we show that spherical cap-shaped ionic liquid drops sitting on nanowire array are able to continuously output electricity when exposed to outdoor air, which we attribute to the daily humidity fluctuation induced directional capillary flow. Specifically, ionic liquid drops could absorb/desorb water around the liquid/vapor interface and swell/shrink depending on air humidity fluctuation. While pinning of the drop by nanowire array suppresses advancing/receding of triple-phase contact line. To maintain the surface tension-regulated spherical cap profile, inward/outward flow arises for removing excess fluid from the edge or filling the perimeter with fluid from center. This moisture absorption/desorption-caused capillary flow is confirmed by in-situ microscope imaging. We conduct further research to reveal how environmental humidity affects flow rate and power generation performance. To further illustrate feasibility of our strategy, we combine the generators to light up a red diode and LCD screen. All these results present the great potential of tiny humidity fluctuation as an easily accessible anytime-and-anywhere small-scale green energy resource.

3D PCL/collagen nanofibrous medical dressing for one-time treatment of diabetic foot ulcers.

Nanofibrous dressings exhibit high specific surface areas, good histocompatibility, enhanced wound healing, and reduced inflammation, which have broad technological implications for treating diabetic foot ulcers (DFUs). However, current nanofibrous dressings still suffer from high resistance to cell infiltration and multiple dressing changes. In this study, polycaprolactone (PCL) and collagen were adopted as electrospinning materials to prepare a 3D PCL/Collagen (PC) nanofibrous dressing (3D-PC) using aqueous phase fibre reassembly technology. The matrix metalloproteinases (MMPs) inhibitor doxycycline hyclate (DCH)-loaded halloysite nanotubes (HNTs) (DCH@HNTs) and antibacterial agent cephalexin (CEX) were loaded onto the dressing to prepare a multifunctional 3D drug-loaded PCL/Collagen nanofibrous dressing to promote DFU wound healing. The obtained 3D nanofibrous dressing exhibited high water absorption capacity and swelling capacity. It showed good antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) in vitro antibacterial test. In addition, the 3D nanofibrous dressing demonstrated good biocompatibility. It could significantly reduce the frequency of dressing changes and improve the healing of DFU wounds compared with the conventional multiple dressing changes method, suggesting a potential candidate for healing diabetic wounds.

Charge-controllable mussel-inspired magnetic nanocomposites for selective dye adsorption and separation.

Magnetic polydopamine (PDA) nanocomposites were prepared with a facile and sustainable synthetic method. The as-synthesized polymer-based hybrid composites inherited the intrinsic adhesiveness contributed by catechol and amino moieties of PDA as well as the magnetic property of Fe3O4. With the unique properties of PDA, the surface charges of Fe3O4@PDA could be easily tuned by pH for smart adsorption-desorption behaviors. Four commercially available dyestuffs including crystal violet, rhodamine B, direct blue 71 and orange G with different structures and surface charges in solution were selected to investigate the adsorption ability and universality of Fe3O4@PDA in wastewater treatment. It was found that the nanocomposites could successfully adsorb these cationic and anionic dyes under suitable pH conditions. This confirmed the ability of the nanoadsorbents for the removal of common textile dyes. The dispersed magnetic nanoadsorbents also demonstrated the ease of collection from dye mixtures, and the possibility of reusing them for several cycles. Selective dye separation was found to be achievable via simple charge control without large consumption of organic solvent and energy. These bio-inspired nanocomposite adsorbents have shown high potential in wastewater treatment and selective recovery of dye waste, especially for wastewater containing ionic dyes.

Environmentally Benign Biosynthesis of Hierarchical MOF/Bacterial Cellulose Composite Sponge for Nerve Agent Protection.

The fabrication of MOF polymer composite materials enables the practical applications of MOF-based technology, in particular for protective suits and masks. However, traditional production methods typically require organic solvent for processing which leads to environmental pollution, low-loading efficiency, poor accessibility, and loss of functionality due to poor solvent resistance properties. For the first time, we have developed a microbial synthesis strategy to prepare a MOF/bacterial cellulose nanofiber composite sponge. The prepared sponge exhibited a hierarchically porous structure, high MOF loading (up to ≈90 %), good solvent resistance, and high catalytic activity for the liquid- and solid-state hydrolysis of nerve agent simulants. Moreover, the MOF/ bacterial cellulose composite sponge reported here showed a nearly 8-fold enhancement in the protection against an ultra-toxic nerve agent (GD) in permeability studies as compared to a commercialized adsorptive carbon cloth. The results shown here present an essential step toward the practical application of MOF-based protective gear against nerve agents.