Salt-rejecting 3D cone flowing evaporator based on bilayer photothermal paper for high-performance solar seawater desalination.

Solar energy-driven water evaporation technology is a promising, low-cost and sustainable approach to alleviate the global clean water shortage, but usually suffers from low water evaporation rate and severe salt deposition on the water evaporation surface. In this work, a hydrophilic bilayer photothermal paper-based three-dimensional (3D) cone flowing evaporator was designed and prepared for stable high-performance seawater desalination with excellent salt-rejecting ability. The as-prepared bilayer photothermal paper consisted of MXene (Ti3C2Tx) and HAA (ultralong hydroxyapatite nanowires, poly(acrylic acid), and poly(acrylic acid-2-hydroxyethyl ester)). The accordion-like multilayered MXene acted as the efficient solar light absorber, and ultralong hydroxyapatite (HAP) nanowires served as the thermally insulating and supporting skeleton with a porous networked structure. A siphon effect-driven unidirectional fluid transportation unit in the 3D cone flowing evaporator could guide the concentrated saline flowing away from the evaporating surface to prevent salt deposition on the evaporation surface, avoiding severe deterioration of the performance in solar water evaporation. Furthermore, combining high solar light absorption and high photothermal conversion efficiencies, low water evaporation enthalpy (1838 ±â€¯11 J g-1), and additional energy taken from the ambient environment, the as-prepared cone flowing evaporator exhibited a high water evaporation rate of 3.22 ±â€¯0.20 kg m-2 h-1 for real seawater under one sun illumination (1 kW m-2), which was significantly higher than many values reported in the literature. This study provides an effective approach for designing high-performance solar energy-driven water evaporators for sustainable seawater desalination and wastewater purification.

Ultralong Nanowires of Cadmium Phosphate Hydroxide Synthesized Using a Cadmium Oleate Precursor Hydrothermal Method and Sulfidation Conversion to Ultralong CdS Nanowires.

Ultralong nanowires with ultrahigh aspect ratios exhibit high flexibility, and they are promising for applications in various fields. Herein, a cadmium oleate precursor hydrothermal method is developed for the synthesis of ultralong nanowires of cadmium phosphate hydroxide. In this method, water-soluble cadmium salt is used as the cadmium source, water-soluble phosphate is used as the phosphorus source, and sodium oleate is adopted as a reactant to form cadmium oleate precursor and as a structure-directing agent. By using this method, ultralong nanowires of cadmium phosphate hydroxide are successfully synthesized using CdCl2, sodium oleate, and NaH2PO4 as reactants in an aqueous solution by hydrothermal treatment at 180 °C for 24 h. In addition, a new type of flexible fire-resistant inorganic paper with good electrical insulation performance is fabricated using ultralong nanowires of cadmium phosphate hydroxide. As an example of the extended application of this synthetic method, ultralong nanowires of cadmium phosphate hydroxide can be converted to ultralong CdS nanowires through a convenient sulfidation reaction. In this way, ultralong CdS nanowires are successfully synthesized by simple sulfidation of ultralong nanowires of cadmium phosphate hydroxide under mild conditions. The as-prepared ultralong nanowires of cadmium phosphate hydroxide are promising for applications as the precursors and templates for synthesizing other inorganic ultralong nanowires and have wide applications in various fields.

Engineering Copper-Containing Nanoparticles-Loaded Silicene Nanosheets with Triple Enzyme Mimicry Activities and Photothermal Effect for Promoting Bacteria-Infected Wound Healing.

Skin wounds accompanied by bacterial infections threaten human health, and conventional antibiotic treatments are ineffective for drug-resistant bacterial infections and chronically infected wounds. The development of non-antibiotic-dependent therapeutics is highly desired but remains a challenging issue. Recently, 2D silicene nanosheets with considerable biocompatibility, biodegradability, and photothermal-conversion performance have received increasing attention in biomedical fields. Herein, copper-containing nanoparticles-loaded silicene (Cu2.8O@silicene-BSA) nanosheets with triple enzyme mimicry catalytic (peroxidase, catalase, and oxidase-like) activities and photothermal function are rationally designed and fabricated for efficient bacterial elimination, angiogenesis promotion, and accelerated wound healing. Cu2.8O@silicene-BSA nanosheets display excellent antibacterial activity through synergistic effects of reactive oxygen species generated from multiple catalytic reactions, intrinsic bactericidal activity of released Cu2+ ions, and photothermal effects, achieving high antibacterial efficiencies on methicillin-resistant Staphylococcus aureus (MRSA) of 99.1 ± 0.7% in vitro and 97.2 ± 1.6% in vivo. In addition, Cu2.8O@silicene-BSA nanosheets exhibit high biocompatibility for promoting human umbilical vein endothelial cell (HUVEC) proliferation and angiogenic differentiation. In vivo experiments reveal that Cu2.8O@silicene-BSA nanosheets with synergistic photothermal/chemodynamic therapeutics effectively accelerate MRSA-infected wound healing by eliminating bacteria, alleviating inflammation, boosting collagen deposition, and promoting angiogenesis. This research presents a promising strategy to engineer photothermal-assisted nanozyme catalysis for bacteria-invaded wound healing.

Sparganosis of a thoracic vertebra misdiagnosed as bone metastasis from lung cancer.

Sparganosis is a rare parasitic infection caused by plerocercoid tapeworm larvae. We described a case of a 27-year-old man presenting with numbness in both legs and masses in the right lung and spine, initially thought to have spinal metastasis from lung cancer. However, after pathological and parasitological examinations, the patient was found to have spinal sparganosis, likely due to a history of consuming raw frogs. The patient was successfully treated with praziquantel, resulting in the recovery of muscle strength in his legs. This case highlights the importance of considering spinal sparganosis as a differential diagnosis in patients with spinal masses, especially those with a history of consuming raw or undercooked frogs. Accurate diagnosis and early treatment are crucial for managing this infection.

Bioinspired Aerogel with Vertically Ordered Channels and Low Water Evaporation Enthalpy for High-Efficiency Salt-Rejecting Solar Seawater Desalination and Wastewater Purification.

Solar energy-driven water evaporation is a promising sustainable strategy to purify seawater and contaminated water. However, developing solar evaporators with high water evaporation rates and excellent salt resistance still faces a great challenge. Herein, inspired by the long-range ordered structure and water transportation capability of lotus stem, a biomimetic aerogel with vertically ordered channels and low water evaporation enthalpy for high-efficiency solar energy-driven salt-resistant seawater desalination and wastewater purification is developed. The biomimetic aerogel consists of ultralong hydroxyapatite nanowires as heat-insulating skeletons, polydopamine-modified MXene as a photothermal material with broadband sunlight absorption and high photothermal conversion efficiency, polyacrylamide, and polyvinyl alcohol as reagents to lower the water evaporation enthalpy and as glues to enhance the mechanical performance. The honeycomb porous structure, unidirectionally aligned microchannels, and nanowire/nanosheet/polymer pore wall endow the biomimetic aerogel with excellent mechanical properties, rapid water transportation, and excellent solar water evaporation performance. The biomimetic aerogel exhibits a high water evaporation rate (2.62 kg m-2  h-1 ) and energy efficiency (93.6%) under one sun irradiation. The superior salt-rejecting ability of the designed water evaporator enables stable and continuous seawater desalination, which is promising for application in water purification to mitigate the global water crisis.

Customized Cellulose Fiber Paper Enabled by an In Situ Growth of Ultralong Hydroxyapatite Nanowires.

Cellulose fiber (CF) paper is a low-cost, sustainable, and flexible substrate, which has gained increasing interest recently. Before practical usage, the functionalization of the pristine CF paper is indispensable to meet requirements of specific applications. Different from conventional surface modification or physical mixing methods, we report in situ growth of ultralong hydroxyapatite nanowires (HAPNWs) with lengths larger than 10 µm on the CF paper. HAPNWs are radially aligned on the surface of CFs, creating a micro/nanoscale hierarchical structure. By means of the excellent ion exchange ability of HAP and the hierarchical structure, the functions of the CF paper can be easily customized. As a proof-of-concept, we demonstrate two kinds of functional CF paper: (1) the photoluminescent CF paper by doping Eu3+ and Tb3+ ions into the crystal lattice of HAPNWs and (2) the superhydrophobic CF paper by coating poly(dimethylsiloxane) on the HAPNW hierarchical structure, which can be applied for self-cleaning and oil/water separation. It is expected that an in situ growth of ultralong HAPNWs will provide an instructive guideline for designing a CF paper with specific functions.

Flexible Salt-Rejecting Photothermal Paper Based on Reduced Graphene Oxide and Hydroxyapatite Nanowires for High-Efficiency Solar Energy-Driven Vapor Generation and Stable Desalination.

Vapor generation using solar energy is emerging as an efficient technology for wastewater purification and seawater desalination to relieve global water crisis. However, salt deposition on the evaporation surface seriously impairs the long-term steady water evaporation performance. Herein, the flexible salt-rejecting photothermal paper comprising reduced graphene oxide (rGO) and ultralong hydroxyapatite nanowires (HNs) has been developed for high-performance solar energy-driven water evaporation and stable desalination of seawater. The rGO/HN photothermal paper has advantages such as the hierarchical porous structure, interconnected channels, high mechanical strength, high efficiencies of solar light absorption and photothermal conversion, fast water transportation, and good heat insulation and salt-rejecting properties. Furthermore, the hydrophilicity and hydrophobicity of the rGO/HN photothermal paper can be adjusted by regulating the thermal treatment time. The water evaporation rate and energy efficiency of the hydrophilic rGO/HN photothermal paper are 1.48 kg m-2 h-1 and 89.2%, respectively, under 1 sun illumination (1 kW m-2). The hydrophobic rGO/HN photothermal paper shows a long-time stable water evaporation and salt-rejecting performance in the process of seawater desalination. The flexible salt-rejecting rGO/HN photothermal paper can produce clean water from wastewater and seawater with high rejection rates of organic dyes, metal ions, and salt ions, and it is promising for applications in water purification and seawater desalination.

A salt-resistant Janus evaporator assembled from ultralong hydroxyapatite nanowires and nickel oxide for efficient and recyclable solar desalination.

Solar energy-driven interfacial water evaporation is a promising energy utilization technology in the field of seawater desalination and water purification. However, the accumulation of salt on the heating surface severely impairs the water evaporation performance and long-time stability. Herein, we demonstrate a new kind of photothermal paper comprising a high-temperature-resistant paper made from ultralong hydroxyapatite nanowires and glass fibers and black nickel oxide (NiO) nanoparticles for solar energy-driven desalination. Owing to the high photothermal conversion ability, fast water transportation in the air-laid paper, and good heat insulation, the hydrophilic HN/NiO photothermal paper can achieve efficient, stable and recyclable water evaporation performance. In addition, a Janus HN/NiO photothermal paper based on hydrophobic sodium oleate-modified ultralong hydroxyapatite nanowires has been developed, and it has a high water evaporation efficiency of 83.5% under 1 kW m-2 irradiation. In particular, with the bottom hydrophobic ultralong hydroxyapatite nanowire layer and water-transporting channels in the air-laid paper to facilitate salt exchange, the as-prepared Janus evaporator exhibits no salt accumulation on the surface, high performance and long-time stable desalination using simulated seawater (3.5 wt% NaCl). Furthermore, the Janus evaporator with the hydrophobic ultralong hydroxyapatite nanowire substrate can be extended to support other photothermal materials such as black titanium oxide (Ti2O3) and Ketjen black carbon. The as-prepared Janus HN/Ti2O3 and Janus HN/KB photothermal paper also exhibit salt-resistant desalination function. The as-prepared Janus salt-resistant photothermal paper with efficient, stable and recyclable merits has great potential in solar energy-driven desalination and water purification.

Light-Operated Dual-Mode Propulsion at the Liquid/Air Interface Using Flexible, Superhydrophobic, and Thermally Stable Photothermal Paper.

The direct transformation of external energy into mechanical work by the self-propelled motor inspires and promotes the development of miniaturized machines. Several strategies have been utilized to realize the self-driven motion, but in some cases multiple power sources are needed, and this would complicate the operation in diverse environments. In this regard, the dual-mode self-propelled system based on a single power source is highly desirable. In this work, single-light-actuated dual-mode propulsion at the liquid/air interface is realized by using flexible, superhydrophobic, and thermostable photothermal paper made from flexible ultralong hydroxyapatite nanowires, titanium sesquioxide (Ti2O3) particles, and poly(dimethylsiloxane) coating. The superhydrophobic surface enables the thermostable photothermal paper to float on the water surface spontaneously and significantly reduces the drag force. In the usual situation, the heat power produced by the photothermal effect is utilized to trigger the Marangoni propulsion. While the Marangoni effect is quenched in water containing the surfactant, the propulsion mode can be directly switched into the vapor-enabled propulsion mode by simply increasing the light power density. Particularly, the light-driven motion in a linear, curvilinear, or rotational manner can be realized by designing the self-propelled machines with appropriate shapes by using the processable photothermal paper. It is expected that the as-prepared dual-mode self-propelled, flexible, superhydrophobic, and thermostable photothermal paper-based devices have promising applications in various fields such as microrobots, biomedicine, and environmental monitoring.

Secret Paper with Vinegar as an Invisible Security Ink and Fire as a Decryption Key for Information Protection.

Security inks based on photoluminescent materials are mostly investigated for security applications, such as information encryption and decryption, anti-counterfeiting, and data storage. Although they are invisible to the naked eye under ambient light, they can be detected under ultraviolet or near-infrared light. Herein, a new kind of secret paper made from network-structured ultralong hydroxyapatite nanowires and cellulose fibers has been developed. White vinegar, a common cooking ingredient, is used as an invisible security ink. Covert information on the secret paper written with white vinegar is totally invisible under natural light, but it can be decrypted and clearly read after exposure to fire; the response time to fire is short (<10 s). The ways of writing on the secret paper are diverse by using various pens loaded with white vinegar.

Bioinspired Macroscopic Ribbon Fibers with a Nacre-Mimetic Architecture Based on Highly Ordered Alignment of Ultralong Hydroxyapatite Nanowires.

A variety of biological materials in natural organisms supply a rich source of structural design guidelines and inspirations for the construction of advanced structural materials with excellent mechanical properties. In this work, inspired by the natural nacre and human bone, a kind of flexible macroscopic ribbon fiber made from highly ordered alignment of ultralong hydroxyapatite (HAP) nanowires and sodium polyacrylate (PAAS) with a "brick-and-mortar" layered structure has been developed by a scalable and convenient wet-spinning method. The quasi-long-range orderly liquid crystal of one-dimensional ultralong hydroxyapatite nanowires is employed and spun into the continuous flexible macroscopic ribbon fiber. In this work, highly ordered ultralong HAP nanowires act as the hard "brick" and PAAS acts as the soft "mortar", and the nacre-mimetic layered architecture is obtained. The as-prepared flexible macroscopic HAP/PAAS ribbon fiber exhibits superior mechanical properties, and the maximum tensile strength and Young's modulus are as high as 203.58 ± 45.38 MPa and 24.56 ± 5.35 GPa, respectively. In addition, benefiting from the excellent flexibility and good knittability, the as-prepared macroscopic HAP/PAAS ribbon fiber can be woven into various flexible macroscopic architectures. Additionally, the as-prepared flexible macroscopic HAP/PAAS ribbon fiber can be further functionalized by incorporation of various functional components, such as magnetic and photoluminescent constituents. The as-prepared flexible macroscopic HAP/PAAS ribbon fiber has potential applications in various fields such as smart wearable devices, optical devices, magnetic devices, and biomedical engineering.

Flexible Fire-Resistant Photothermal Paper Comprising Ultralong Hydroxyapatite Nanowires and Carbon Nanotubes for Solar Energy-Driven Water Purification.

Efficient utilization of abundant solar energy for clean water generation is considered a sustainable and environment friendly approach to mitigate the global water crisis. For this purpose, this study reports a flexible fire-resistant photothermal paper by combining carbon nanotubes (CNTs) and fire-resistant inorganic paper based on ultralong hydroxyapatite nanowires (HNs) for efficient solar energy-driven water steam generation and water purification. Benefiting from the structural characteristics of the HN/CNT photothermal paper, the black CNT surface layer exhibits a high light absorbability and photothermal conversion capability, the HN-based inorganic paper acts as a thermal insulator with a high temperature stability, low thermal conductivity, and interconnected porous structure. By combining these advantages, high water evaporation efficiencies of 83.2% at 1 kW m-2 and 92.8% at 10 kW m-2 are achieved. In addition, the HN/CNT photothermal paper has a stable water evaporation capability during recycling and long-time usage. The promising potential of the HN/CNT photothermal paper for efficient production of drinkable water from both actual seawater and simulative wastewater samples containing heavy metal ions, dyes, and bacteria is also demonstrated. The highly flexible HN/CNT photothermal paper is promising for application in highly efficient solar energy-driven seawater desalination and wastewater purification.

Bioinspired Ultralight Inorganic Aerogel for Highly Efficient Air Filtration and Oil-Water Separation.

Inorganic aerogels have been attracting great interest owing to their distinctive structures and properties. However, the practical applications of inorganic aerogels are greatly restricted by their high brittleness and high fabrication cost. Herein, inspired by the cancellous bone, we have developed a novel kind of hydroxyapatite (HAP) nanowire-based inorganic aerogel with excellent elasticity, which is highly porous (porosity ≈ 99.7%), ultralight (density 8.54 mg/cm3, which is about 0.854% of water density), and highly adiabatic (thermal conductivity 0.0387 W/m·K). Significantly, the as-prepared HAP nanowire aerogel can be used as the highly efficient air filter with high PM2.5 filtration efficiency. In addition, the HAP nanowire aerogel is also an ideal candidate for continuous oil-water separation, which can be used as a smart switch to separate oil from water continuously. Compared with organic aerogels, the as-prepared HAP nanowire aerogel is biocompatible, environmentally friendly, and low-cost. Moreover, the synthetic method reported in this work can be scaled up for large-scale production of HAP nanowires, free from the use of organic solvents. Therefore, the as-prepared new kind of HAP nanowire aerogel is promising for the applications in various fields.

Fire Alarm Wallpaper Based on Fire-Resistant Hydroxyapatite Nanowire Inorganic Paper and Graphene Oxide Thermosensitive Sensor.

Wallpaper with multiple functions, such as fire resistance and an automatic alarm in fire disasters, will be attractive for the interior decoration of houses. Herein, we report a smart fire alarm wallpaper prepared using fire-resistant inorganic paper based on ultralong hydroxyapatite nanowires (HNs) and graphene oxide (GO) thermosensitive sensors. At room temperature, the GO thermosensitive sensor is in a state of electrical insulation; however, it becomes electrically conductive at high temperatures. In a fire disaster, high temperature will rapidly remove the oxygen-containing groups of GO, leading to the transformation process of GO from an electrically insulated state into an electrically conductive one. In this way, the alarm lamp and alarm buzzer connected with the GO thermosensitive sensor will send out the alerts to people immediately for taking emergency actions. After the surface modification with polydopamine of GO (PGO), the sensitivity and flame retardancy of the GO thermosensitive sensor are further improved, resulting in a low responsive temperature (126.9 °C), fast response (2 s), and sustained working time in the flame (at least 5 min). Compared with combustible commercial wallpaper, the smart fire alarm wallpaper based on HNs and GO (or PGO) is superior owing to excellent nonflammability and high-temperature resistance of HNs, which can protect the GO (or PGO) thermosensitive sensor from the flames. The smart fire alarm wallpaper can be processed into various shapes, dyed with different colors, and printed with the commercial printer and thus has promising applications in high-safety interior decoration of houses.

Antibacterial gluey silver-calcium phosphate composites for dentine remineralization.

The development of multifunctional dental-restorative biomaterials with antibacterial activity and remineralization effect for damaged tooth repair is urgent since dental caries is still one of the most common tooth diseases in human beings. Herein, we report a facile strategy for the synthesis of gluey silver-calcium phosphate (GSCP) composites using the rapid microwave-assisted solvothermal method. The as-prepared GSCP composite is an organic-inorganic hybrid, and Ag+ ions display a significant influence on the formation of GSCP by interacting with adenosine triphosphate biomolecules. The as-prepared GSCP composite shows good antibacterial properties, in addition, it exhibits a great effect on sheltering dentinal canaliculi and improving the remineralization of dentine in the simulated saliva. The as-prepared GSCP composite is promising for various applications such as oral healthcare, especially, remineralization of dentine, and antibacterial applications.

Low-Cost and Scaled-Up Production of Fluorine-Free, Substrate-Independent, Large-Area Superhydrophobic Coatings Based on Hydroxyapatite Nanowire Bundles.

To date, the scaled-up production and large-area applications of superhydrophobic coatings are limited because of complicated procedures, environmentally harmful fluorinated compounds, restrictive substrates, expensive equipment, and raw materials usually involved in the fabrication process. Herein, the facile, low-cost, and green production of superhydrophobic coatings based on hydroxyapatite nanowire bundles (HNBs) is reported. Hydrophobic HNBs are synthesised by using a one-step solvothermal method with oleic acid as the structure-directing and hydrophobic agent. During the reaction process, highly hydrophobic C-H groups of oleic acid molecules can be attached in situ to the surface of HNBs through the chelate interaction between Ca2+ ions and carboxylic groups. This facile synthetic method allows the scaled-up production of HNBs up to about 8 L, which is the largest production scale of superhydrophobic paint based on HNBs ever reported. In addition, the design of the 100 L reaction system is also shown. The HNBs can be coated on any substrate with an arbitrary shape by the spray-coating technique. The self-cleaning ability in air and oil, high-temperature stability, and excellent mechanical durability of the as-prepared superhydrophobic coatings are demonstrated. More importantly, the HNBs are coated on large-sized practical objects to form large-area superhydrophobic coatings.

Hydroxyapatite Nanowire-Based All-Weather Flexible Electrically Conductive Paper with Superhydrophobic and Flame-Retardant Properties.

How to survive under various harsh working conditions is a key challenge for flexible electronic devices because their performances are always susceptible to environments. Herein, we demonstrate the novel design and fabrication of a new kind of the all-weather flexible electrically conductive paper based on ultralong hydroxyapatite nanowires (HNs) with unique combination of the superhydrophobic surface, electrothermal effect, and flame retardancy. The superhydrophobic surface with water repellency stabilizes the electrically conductive performance of the paper in water. For example, the electrical current through the superhydrophobic paper onto which water droplets are deposited shows a little change (0.38%), and the electrical performance is steady as well even when the paper is immersed in water for 120 s (just 3.65% change). In addition, the intrinsic electrothermal effect of the electrically conductive paper can efficiently heat the paper to reach a high temperature, for example, 224.25 °C, within 10 s. The synergistic effect between the electrothermal effect and superhydrophobic surface accelerates the melting and removal of ice on the heated electrically conductive paper. Deicing efficiency of the heated superhydrophobic electrically conductive paper is ∼4.5 times that of the unheated superhydrophobic electrically conductive paper and ∼10.4 times that of the heated superhydrophilic paper. More importantly, benefiting from fire-resistant ultralong HNs, thermally stable Ketjen black, and Si-O backbone of poly(dimethylsiloxane), we demonstrate the stable and continuous service of the as-prepared electrically conductive paper in the flame for as long as 7 min. The electrical performance of the electrically conductive paper after flame treatment can maintain as high as 90.60% of the original value. The rational design of the electrically conductive paper with suitable building materials and structure demonstrated here will give an inspiration for the development of new kinds of all-weather flexible electronic devices that can work under harsh conditions.

Luminescent, Fire-Resistant, and Water-Proof Ultralong Hydroxyapatite Nanowire-Based Paper for Multimode Anticounterfeiting Applications.

Counterfeiting of valuable certificates, documents, and banknotes is a serious issue worldwide. As a result, the need for developing novel anticounterfeiting materials is greatly increasing. Herein, we report a new kind of ultralong hydroxyapatite nanowire (HAPNW)-based paper with luminescence, fire resistance, and waterproofness properties that may be exploited for anticounterfeiting applications. In this work, lanthanide-ion-doped HAPNWs (HAPNW:Ln3+) with lengths over 100 µm have been synthesized and used as a raw material to fabricating a free-standing luminescent, fire-resistant, water-proof paper through a simple vacuum filtration process. It is interesting to find that the luminescence intensity, structure, and morphology of HAPNW:Ln3+ highly depend on the experimental conditions. The as-prepared HAPNW:Ln3+ paper has a unique combination of properties, such as high flexibility, good processability, writing and printing abilities, luminescence, tunable emission color, waterproofness, and fire resistance. In addition, a well-designed pattern can be embedded in the paper that is invisible under ambient light but viewable as a luminescent color under ultraviolet light. Moreover, the HAPNW:Ln3+ paper can be well-preserved without any damage after being burned by fire or soaked in water. The unique combination of luminescence, fire resistance, and waterproofness properties and the nanowire structure of the as-prepared HAPNW:Ln3+ paper may be exploited toward developing a new kind of multimode anticounterfeiting technology for various high-level security antiforgery applications, such as in making forgery-proof documents, certificates, labels, and tags and in packaging.

Ultralong Hydroxyapatite Nanowires-Based Paper Co-Loaded with Silver Nanoparticles and Antibiotic for Long-Term Antibacterial Benefit.

Hydroxyapatite is a kind of biocompatible, environmentally friendly, and versatile inorganic biomaterial. Herein, the preparation of ultralong hydroxyapatite nanowires (HAPNWs)-based antibacterial paper co-loaded with silver nanoparticles (AgNPs) and antibiotic is reported. HAPNWs are used to prepare AgNPs in situ using an aqueous solution containing AgNO3 under the sunlight without added reducing agent at room temperature. Subsequently, ciprofloxacin (CIP) as an antibiotic is loaded on the HAPNWs@AgNPs. The resultant HAPNWs@AgNPs-CIP paper possesses several unique properties, including high flexibility, high Brunauer-Emmett-Teller (BET) specific surface area (47.9 m2 g-1), high drug loading capacity (447.4 mg g-1), good biocompatibility, sustained and pH-responsive drug release behavior (5.40-6.75% of Ag+ ions and 37.7-76.4% of CIP molecules at pH values of 7.4-4.5 at day 8, respectively), and reusable recycling. In the antibacterial tests against Escherichia coli and Staphylococcus aureus, the HAPNWs@AgNPs-CIP paper exhibits large diameters of inhibition zones and low minimum inhibitory concentrations (30 and 40 µg mL-1), revealing the high antibacterial activity. Besides, the consecutive agar diffusion tests (8 cycles), long-term stability tests (over 56 days), and continuous contamination tests (5 cycles) demonstrate the excellent recycling performance and long-term antibacterial activity of the HAPNWs@AgNPs-CIP paper. These results indicate a promising potential of the HAPNWs@AgNPs-CIP bactericidal paper for tackling public health issues related to bacterial infections.

Inorganic Nanowires-Assembled Layered Paper as the Valve for Controlling Water Transportation.

Layered materials with open interlayer channels enable various applications such as tissue engineering, ionic and molecular sieving, and electrochemical devices. However, most reports focus on the two-dimensional nanosheets-assembled layered materials, whose interlayer spacing is limited at the nanometer scale. Herein, we demonstrate that one-dimensional inorganic nanowires are the ideal building blocks for the construction of layered materials with open interlayer channels as well, which has not aroused much attention before. It is found that the relatively long inorganic nanowires are capable of assembling into free-standing layered paper with open interlayer channels during the filtration process. The spacings of interlayer channels between adjacent layers are up to tens of micrometers, which are much larger than those of the two-dimensional nanosheets-assembled layered materials. But the closed interlayer channels are observed when the relatively short inorganic nanowires are used as building blocks. The mechanism based on the relationship between the structural variation and the nanowires used is proposed, including the surface charge amplified effect, surface charge superimposed effect, and pillarlike supporting effect. According to the proposed mechanism, we have successfully fabricated a series of layered paper sheets whose architectures (including interlayer channels of cross section and pores on the surface) show gradient changes. The as-prepared layered paper sheets are employed as the valves for controlling water transportation. Tunable water transportation is achieved by the synergistic effect between in-plane interlayer channels (horizontal transportation) from the open to the closed states, and through-layer pores (vertical transportation) without surface modification or intercalation of any guest species.