Molecular characteristics and systemic treatment options of liposarcoma: A systematic review.

Liposarcoma (LPS) is a rare soft tissue sarcoma that develops from the differentiation of fat cells, typically occurring in the lower extremities and retroperitoneal space. Depending on its histological morphology and molecular changes, LPS can be divided into various subtypes, each exhibiting distinct biological behaviors. During treatment, especially for LPS arising in the retroperitoneum, the extent and quality of the initial surgery are critically important. Treatment strategies must be tailored to the specific type of LPS. Over the past few decades, the treatment of LPS has undergone numerous advancements, with new therapeutic approaches such as targeted drugs and immunotherapies continually emerging. This paper reviews the biological characteristics, molecular alterations, as well as surgical and pharmacological treatments of various LPS subtypes, with the aim of enhancing clinicians' understanding and emphasizing the importance of individualized precision therapy. With a deeper understanding of the biological characteristics and molecular alterations of LPS, future treatment trends are likely to focus more on developing personalized treatment plans to better address the various types of LPS.

Characterization of size-resolved effective density of atmospheric particles in an urban atmosphere in Southern China.

Effective density (ρeff) is one of the most important physical properties of atmospheric particles, providing important references in exploring the emissions and aging processes of fresh particles. In this study, a combined system of differential mobility analyzer, centrifugal particle mass analyzer, and condensation particle counter was used to periodically measure the ρeff of atmospheric particles in Shenzhen from Oct. 2021 to Jan. 2022. Results showed that the ρeff of particles with various size presented a bimodal distribution, which could be divided into main density (ρm, main peak, corresponding to relatively dense particles after aging) and sub density (ρs, sub peak, corresponding to fresh particles). The occurrence frequencies of ρs of particles with diameters of 50 and 80 nm were less than 20%, but were as high as about 40% of that with diameters from 120 to 350 nm. The ρm showed increasing trend with the size of particles, while ρs decreased as the increasing of the size of particles. The ρeff on pollution day varied significantly with chemical compositions. The increasing of the proportion of sulfate could promote the increasing of ρeff, while black carbon and organic matter caused opposite effects, which may be related to various factors, including the difference of the material density and morphology of various chemical components. The ρeff of 50, 80 and 120 nm particles decreased considerably during the new particle formation event, indicating that organic condensation was an important contributor to new particle growth.

Corrosion Resistance Mechanism of Mica-Graphene/Epoxy Composite Coating in CO2-Cl- System.

The working environment for tubing in oil and gas fields is becoming more and more serious due to the exploration of unconventional oil and gas resources, leading to the increasing need for a protective internal coating to be used in tubing. Therefore, a new mica-graphene/epoxy composite coating with different graphene contents (0.0, 0.2, 0.5, 0.7, and 1.0 wt.%) was prepared to improve the tubing resistance to a corrosive medium, an autoclave was used to simulate the working environment, and an electrochemical workstation assisted by three-electrodes was used to study the electrochemical characteristics of the coating. The results showed that the addition of a certain amount of graphene into the mica/epoxy coating significantly improved the corrosion resistance of the composite coating, and when the graphene content increased, the corrosion resistance of the mica/epoxy coating first increased and then decreased when the corrosion current density of a 35 wt.% 800# mica/epoxy coating with a 0.7 wt.% graphene content was the lowest (7.11 × 10-13 A·cm-2), the corrosion potential was the highest (292 mV), the polarization resistance was the largest (3.463 × 109 Ω·cm2), and the corrosion resistance was improved by 89.3% compared to the coating without graphene. Furthermore, the adhesion of the coating with 0.7 wt.% graphene was also the largest (8.81 MPa, increased by 3.4%) and had the smallest diffusion coefficient (1.566 × 107 cm2·s-1, decreased by 76.1%), and the thermal stability improved by 18.6%. Finally, the corrosion resistance mechanism of the composite coating with different graphene contents at different soaking times was revealed based on the electrochemistry and morphology characteristics other than water absorption and contact angle.

The relationship between famine exposure during early life and body mass index in adulthood: A systematic review and meta-analysis.

BACKGROUND: Previous epidemiologic studies have reported famine exposure during early life association with overweight or obesity in adulthood, but a consistent perspective has not been established to date. PURPOSE: To determine, by conducting a systematic review and meta-analysis, whether exposure to famine could increase body mass index (BMI) in adult or not, and assess the association between famine exposure and the risk of overweight or obesity. METHODS: Published articles were systematically searched (until August, 2017) from PubMed, ScienceDirect, Cochrane, and China National Knowledge Infrastructure. Initially, comparing differences in BMI between exposed and non-exposed groups that weight mean difference (WMD) were used. Subsequently, the effect of famine exposure on overweight or obesity risk, which pooled relative risks (RRs), odds ratios (ORs) or hazard ratios (HRs) with 95% confidence intervals (CIs) were calculated using a random-effects model. RESULT: Twenty studies were included in this systematic review and meta-analysis. Compared with non-exposed group, famine exposure group significantly increased the risk of overweight (OR = 1.10, 95% CI: 1.04-1.16) and obesity (OR = 1.15, 95% CI: 1.05-1.24). Sensitivity analyses revealed no significant change in the famine exposure and BMI, the risk of overweight and obesity study when any one study was excluded. Subgroup analyses showed that age, gender, exposure type, study type, continent, famine cause and paper publication date were associated with BMI, the risk of overweight and obesity. Meta-regression analyses suggested that continent, famine cause could partially explain heterogeneity for famine exposure and BMI studies. CONCLUSION: The systematic review and meta-analysis indicates that famine exposure during early life may increase BMI, the risk of overweight and obesity, especially for female, fetal famine exposure or subject age less than 50. Furthermore, famine exposure group the risk of overweight and obesity in cross-sectional studies, Asian studies, famine cause by natural disaster or paper published from 2015 to the present studies are higher than that of non-exposed group.

Weight changes since age 20 and cardiovascular risk factors in a middle-aged Chinese population.

Background: Little is known about the association between weight changes and adverse health outcomes among Chinese adults. Methods: A total of 1715 Chinese adults, 45-60 years of age, have been recruited to participate in the Hefei Nutrition and Health Study started in 2012. Multivariate logistic regression analysis was performed to determine the association of weight changes since age 20 (loss ≥5.0 kg; maintain [±4.9 kg]; gain 5.0-9.9 kg; gain ≥10.0 kg) with cardiovascular risk factors. Results: Men who gained 10.0 kg or more had increased risks of hypertension (odds ratios (OR) = 3.07; 95% CI: 1.98-4.76), impaired fasting glucose (OR = 1.74; 95% CI: 1.02-2.97), reduced high-density lipoprotein (HDL) cholesterol levels (OR = 2.77; 95% CI: 1.42-5.40) and elevated triglyceride levels (OR = 5.72; 95% CI: 2.94-11.12). Women who gained 10.0 kg or more had increased risks of hypertension, elevated low-density lipoprotein (LDL) cholesterol levels and elevated triglycerides levels of 2.01(95% CI: 1.18-3.42), 3.40 (95% CI: 1.18-9.82) and 5.60 (95% CI: 1.59-19.61), respectively. Conclusion: Weight gain during adulthood was associated with increased risks of high triglycerides, hypertension, impaired fasting glucose and risk of reduced HDL cholesterol in men. Furthermore, weight gain was a predictor of high-risk triglycerides, hypertension and elevated LDL cholesterol in women.

Panax notoginseng saponins improve recovery after spinal cord transection by upregulating neurotrophic factors.

Saponins extracted from Panax notoginseng are neuroprotective, but the mechanisms underlying this effect remain unclear. In the present study, we established a rat model of thoracic (T10) spinal cord transection, and injected Panax notoginseng saponins (100 mg/kg) or saline 30 minutes after injury. Locomotor functions were assessed using the Basso, Beattie, and Bresnahan (BBB) scale from 1 to 30 days after injury, and immunohistochemistry was carried out in the ventral horn of the spinal cord at 1 and 7 days to determine expression of nerve growth factor (NGF) and brain-derived neurotrophic factor (BDNF). Our results show that at 7-30 days post injury, the BBB score was higher in rats treated with Panax notoginseng saponins than in those that received saline. Furthermore, at 7 days, more NGF- and BDNF-immunoreactive neurons were observed in the ventral horn of the spinal cord of rats that had received Panax notoginseng saponins than in those that received saline. These results indicate that Panax notoginseng saponins caused an upregulation of NGF and BDNF in rats with spinal cord transection, and improved hindlimb motor function.

[Quantitative trait locus analysis of standard length, body depth and body thickness in mirror carp (Cyprinus carpio L.)].

Based on a full-sib family, the genetic linkage map was constructed with 246 microsatellite and 306 SNP markers, which was used to detect the QTLs for standard length (SL), body depth (H), body thickness (BT), and the ratio of standard length and body depth (SLH) in mirror carp by GridQTL software. The results indicated that a total of 14 related QTLs distributed on the 7 linkage groups were obtained. Seven QTLs were related to standard length, of which the linkage groups of LG6, LG17, LG21, LG23, and LG35 were at 5% significant level, and linkage group LG1 and LG28 were at 1% significant level, which explained 6.6%-12.6% of the phenotypic variance. Three QTLs were identified for body depth on the linkage groups of LG17, LG23 and LG28 (P amp; 0.01), accounting for 11.6%, 12.7%, and 15.6% of the phenotypic variance, respectively. Two QTLs were associated with body thickness on the linkage of LG23 and LG28 (P amp; 0.05), which explained 8.6% and 7.2% of the phenotypic variation, respectively. Two QTLs were responsible for the ratio of standard length and body depth on the linkage of LG21 and LG35 (P amp; 0.05), both of which explained 8.2% of the phenotypic variance. The results provide a useful reference for further candidate gene research and molecular marker assisted selection in mirror carp.

[Mapping and genetic effect analysis of quantitative trait loci related to body length in mirror carp (Cyprinus carpio L.)].

A group of F2 hybrids of mirror carp including 68 individuals was used to construct a linkage map using JoinMap4.0 software. Of 560 markers genotyped, 507 markers (143 SSR markers, 33 EST-SSR markers, and 321 SNP markers) were assigned to the map, which comprised of 62 linkage groups. Quantitative traits loci (QTLs) associated with body length were identified by interval mapping of the software MapQTL 5.0. A linkage group wide permutation test (1 000 replicates) determined the significance of the maximum LOD value over the various intervals analyzed for each linkage group. Twelve QTLs were identified for body length on the linkage groups of BL-1-1 (SNP0137-SNP1481), BL-4-1 (SNP0092-HLJ797), BL-5-1 (SNP1268-HLJ423), BL-7-1 (HLJ870-SNP0702), BL-12-1 (SNP0922-HLJ639), BL-16-1 (HLJE351-SNP0674), BL-25-1 (SNP0394-SNP0862), BL-35-1 (HLJ668-SNP0832), BL-43-1 (SNP0389-SNP1425), BL-47-1 (HLJ057-HLJ1113), BL-47-2 (HLJ1439-HLJ14180), which explained 13.8% to 64.9% of the total variation of body length. Eight major QTLs explained over 20% of the phenotypic variation, which were major QTLs associated with the body length of mirror carp.