RESUMEN
High-entropy alloys (HEAs) have garnered significant attention in different fields due to their exceptional mechanical and physical properties, making them promising candidates for various applications. Several techniques, including physical vapor deposition and pulsed laser deposition (PLD), have been employed for the fabrication of HEA thin films. In this study, we explore a novel approach to synthesizing the lightweight HEA (LWHEA) AlCrFeMnTi using PLD in air at atmospheric pressure with a particular focus on the influence of the laser wavelength on the deposition process and the resulting alloy characteristics. This research investigates the impact of different laser wavelengths on the LWHEA's characterization and the optimization of laser wavelength dependence in air at atmospheric pressure PLD of LWHEA AlCrFeMnTi for tailored surface properties such as phase composition, microstructure, and corrosion resistance. Systematically varying the laser wavelength was attempted to optimize the deposition conditions. This was aimed at achieving enhanced properties and precise control over the alloy's composition. This work contributes to a deeper understanding of the open air PLD process for LWHEAs and sheds light on the role of the laser wavelength in tailoring their properties, which can have significant implications for the development of advanced materials for aerospace, automotive, and other high-performance applications. Ultimately, this research aims to provide valuable insights into the design and fabrication of LWHEAs with tailored properties through laser-based deposition techniques.
RESUMEN
The electrochemical CO2 reduction reaction (CO2RR) holds tremendous promise as a strategy for lowering atmospheric CO2 levels and creating new clean energy sources. The conversion of CO2RR to CO, in particular, has garnered significant scientific interest due to its industrial feasibility. Within this context, the CuZn-based electrocatalyst presents an attractive alternative to conventional CO-selective electrocatalysts, which are often costly and scarce. Nevertheless, the wide-range utilization of CuZn electrocatalysts requires a more comprehensive understanding of their performance and characteristics. In this study, we synthesized ZnO nanorods through electrodeposition and subsequently coated them with CuxO overlayers prepared by atomic layer deposition (ALD). CuxO significantly enhanced CO selectivity, and 88% CO selectivity at a relatively low potential of -0.8 V was obtained on an optimized CuxO overlayer thickness (CuxO-250/ZnO). The addition of CuxO on ZnO was found to dramatically increase the electrochemical surface area (ESCA), lower the charge-transfer resistance (Rct), and introduce new active sites in the ε-CuZn4 phase. Furthermore, electrochemical Raman spectroscopy results showed that the CuxO-250/ALD electrode developed a ZnO layer on the surface during the CO2RR, while the bare ZnO electrode showed no evidence of ZnO during the reaction. These results suggest that the addition of CuxO by ALD played a crucial role in stabilizing ZnO on the surface. The initial amount of CuxO was shown to further affect the redeposition of the ZnO layer and hence affect the final composition of the surface. We attribute the improvement in CO selectivity to the introduction of both ε-CuZn4 and ZnO that developed during the CO2RR. Overall, our study provides new insights into the dynamic behavior and surface composition of CuZn electrocatalysts during CO2RR.
RESUMEN
Composites of graphene (oxide) (GO) and first-row transition-metal cations (Co2+ , Ni2+ , Mn2+ , Fe2+ ) are prepared by mixing GO and aqueous metal salt solutions. The amount of metal cation bound to GO nanosheets is calculated by using inductively coupled plasma mass spectrometry (ICP-MS) and the possible binding sites of the metals are investigated by means of attenuated total reflectance infrared (ATR-IR) spectroscopy and X-ray photoelectron spectroscopy (XPS) measurements. Electrodes loaded with the metal/GO composites are prepared by a simple drop-casting technique without any binders or conductive additives. The effect of electrochemical reduction on the structure of the composite electrodes is investigated by Raman spectroscopy, XPS, X-ray diffraction (XRD) analysis, and field emission scanning electron microscopy (FESEM). A detailed electrochemical characterization is performed for the utilization of the composite electrodes for electrochemical capacitors and possible oxygen reduction reaction electrocatalysts by cyclic voltammetry (CV) and rotating disk electrode measurements. The highest areal capacitance is achieved with the as-deposited Fe/GO composite (38.7â mF cm-2 at 20â mV s-1 ). In the cyclic stability measurements, rCo/GO, rNi/GO, rMn/GO, and rFe/GO exhibit a capacitance retention of 44, 1.1, 73, and 87 % after 3000 cycles of CV at 100â mV s-1 , respectively.
RESUMEN
Here, we present a new concept of a core-shell type ionic liquid/metal organic framework (IL/MOF) composite. A hydrophilic IL, 1-(2-hydroxyethyl)-3-methylimidazolium dicyanamide, [HEMIM][DCA], was deposited on a hydrophobic zeolitic imidazolate framework, ZIF-8. The composite exhibited approximately 5.7 times higher CO2 uptake and 45 times higher CO2/CH4 selectivity at 1 mbar and 25 °C compared to the parent MOF. Characterization showed that IL molecules deposited on the external surface of the MOF, forming a core (MOF)-shell (IL) type material, in which IL acts as a smart gate for the guest molecules.